Team:Freiburg Bioware/NoteBook/Labjournal/Cellculture

From 2010.igem.org

Revision as of 17:23, 20 October 2010 by Asi mit Niwoh (Talk | contribs)

=> Back to Notebook overview

Contents

Cellculture

This subpage is for cellculture, the structure of each experiment is following:

Date of first action, title of the experiment


The motivation
This short introduction provides an inside into our thoughts for this experiment.
The plan
In this section, the design of the experiment is explained.
The results
Interpretation and discussion of our results.



14.6 Seeding AAV293 for transfection


The motivation
We want to create viral stocks with the stratagene R/C, the gene of interest is mVenus. This is a qualitative control.

The plan
AAV 293 and HT1080 Cells have been splitted and plated out on 10 cm dishes for transfektion. After harvesting the cells according to the standard protocol the cell-pellets were resuspendiated in 15ml of DYT medium. 2,5µl of this cell suspension have been mixed with 47.5µl of trypan blue and the cells were counted by using the Neubauer-Meteringchamber.

We counted 12,5x 10^6 cells/ml for the AAV293 cell line and 10x10^6 cells /ml for the HT1080 cell line.

1ml and 1,5 ml of the AAV 293 cells have been seeded on four dishes with 250µl of the cell suspension. Note that that the date is wrong on the plates and the flasks! Cells have been already plated out on the 14th. of June.

We also seated two flasks one for each cell line. Therefor we used 1ml of the HT1080 cell suspension and 2ml of the the AAV293 cells.
1)

  • pAAV_iGEM_mVenus_YFP (glycerol stock B34, P39) P39 has the correct sequence (confirmed)
  • pHelper
  • pAAV_RC

2)

  • pAAV_iGEM_mVenus_YFP (glycerol stock B33, P38) P38 (we dont know if P39 has the correct sequence!)was used because the amount of P39 was not sufficient enough for four Transfections!
  • pHelper
  • pAAV_RC

Plasmid concentrations:
pAAV_RC: 1 µg/µl
pHelper: 280 ng/µl
pAAV_iGEM_mVenus_YFP, P39: 180,83 ng/µl
pAAV_iGEM_mVenus_YFP, P38: 179,75 ng/µl

Cellculture clone 1 and 2 were transfected with P39. Cellculture clone 3 and 4 were transfected with P38.


We could only pipet 3,3 µg (instead of 10 µg) from each of the 3 plasmids into the 15 ml falcons due to insufficient amount of plasmid.

Adrian tried to examine the precipation of the CaCl2+ DNA Clusters. We have to optimize the pH of our 2xHBS at the moment it is 11.12.
The viral stocks were harvested according to standard protocol.
The results


According to the stratagene protocol, transduction efficencies about ~80% are achievable. We performed every step under guidance, so probably something is wrong with the buffers, cells or even the standard protocol. The next step is to repeat this transfection.

19.6 Seeding AAV293 for second transfection according to standard protocol


The motivation
We want to repeat the last transfection and obtain a vsibly higher GOI (mVenus) expression.
The plan
Six transfections were performed according to the standart protocol:
Three 10 cm cellcluture dishes with 293 cells were transfected with 10 µg DNA (3,33 µg each plasmid) and the other three 10 cm cellculture dishes with 30 µg DNA (10 µg DNA each plasmid).

Plasmids:

  • pAAV_iGEM-MCS_mVenus (P41), 507 ng/µl
  • pAAV_RC , 1000 ng/µl
  • pHelper , 280 ng/µl


  • Transduction of 2x6 wells was successfully done (14.25)
  • one six well was transduced with 10µg the other with 30µg DNA amount

The results


The Transduction efficency is still quite low! We have to optimize the stratagene protocol!

30.6 Examination of different Transduction methods


The motivation
We want to check whether the amount of our produced AAV2s has an effect on the transduction rate. Instead of 500µl, 1000µl of the AAV-stock were pipetted into each well.

The plan

1. Plate I(A is up)

3x10^5 cells 3x10^5 cells 3x10^5 cells
3x10^5 cells 3x10^5 cells 3x10^5 cells

Transduction:

1000 µl of Viral Stock DROPPED 1000 µl of Viral Stock gently resuspended1500 µl of Viral Stock rough resuspending
1000 µl of Viral Stock DROPPED 1000 µl of Viral Stock gently resuspended no Transduction


The results
All cells died probably because we forgot to wash the cells with PBS before adding fresh medium. It was not possible to take pictures because the dead cells were all clumped. Looks like we should not transduce 3x10^5 cells with 1000 µl (or more) of our viral solution because almost all cells died in all approaches and the medium indicator was yellow. So we can not say if resuspendig the cells with the viral soultion is a useful alteration of the standard protocol.


3.7 Seeding AAV293 for transfection with different plasmid amounts and harvesting methods


The motivation
We want to check if the amount of plasmids is the reason for the low transduction efficiency. Unfortunately the flow cytometry (FACS) is not available at the moment so the results can only be checked via fuorescence microscopy.

The plan
Transfection with P41 (pAAV_iGEM-MCS_mVenus) was performed according standart protocol. Two transfections where carried out with 10µg (3,33 µg each plasmid) DNA and the other two with 20µg DNA (6,66 µg each plasmid).
We want to investigate which of the following approaches yields a better transduction efficiency.

  • Half of the transfected cells were exposed 3 cycles of thawing and freezing and then centrifuged (15 ml falcon, 2100G). The supernatant was transfered into a new 15 ml falcon and used for transduction.
  • The other half was centrifuged at 300 G for 5min . The supernatant was transfered into another 15 ml falcon and the pellet was resuspended with 5 ml of DMEM. The content of these two falcons was also exposed to 3 cycles of thawing and freezing and then used for transduction.
  • We have got 2 10 cm cellculture dishes with 10µg and 2 dishes with 20µg DNA used for transfection.

Approach with standart protocol (one dish with 10 and the other with 20µg Plasmids)(2100 G and 3 cycles of freezing and thawing)

Deviations from the standart protocol:

  • The cells were centrifuged at 2100 G instead of 10.000 G
  • The viruses were harvested after 44 hours
  • 3 cycles of freezing and thawing


  • used plasmids: 10µg, 20µg GOI-plasmid (mVenus)
  • we have 10µg and 20µg from standart protocol => standard virus
  • we have 10µg and 20µg from standart protocol pellet => Pellet
  • we have 10µg and 20µg from standart protocol suspension => Super
  • amount of 500µl

1. Plate I(A is up)

10µg dropped Super 10µg dropped Super gently resuspending10µg dropped Super gently resuspending
10µg Super gently resuspending Super20µg dropped Super gently resuspending 1:10 dilution control


2. Plate I(A is up)

10µg dropped Super 10µg dropped Super gently resuspending10µg dropped Super gently resuspending
10µg Super gently resuspending Super20µg dropped Super gently resuspending 1:10 dilution control


3. Plate I(A is up)

10µg dropped Pellet 10µg dropped Pellet gently resuspending10µg dropped Pellet gently resuspending
10µg Super gently resuspending Pellet20µg dropped Pellet gently resuspending 1:10 dilution control



The results


We only took some pictures from single cells, because there was no significant difference in fluorescence between each sample. The main conclusion of this experiment is, that we have to get the flow cytometry started.

4.7 Transfection with different amounts of plasmids INSERT CHART


The motivation
We want to check if the mVenus expression and transduction efficiency can be improved with higher amounts of DNA.

The plan
The Transfection was performed with 10, 18 and 24 µg per plasmid (mVenus, pHelper and R/C).
The virus harvest was performed according to standard protocol:

  • 3 Plates got transduced

1. Plate I(A is up) completely 10 µg

300µl resuspended300µl resuspended450µl resuspended
600µl resuspended600µl resuspended control


2. Plate II(A is up)completely 18 µg

300µl resuspended300µl resuspended450µl resuspended
600µl resuspended600µl resuspended control


3. Plate III(A is up) completely 24 µg

300µl resuspended300µl resuspended450µl resuspended
600µl resuspended600µl resuspended control

The results
FACS analysis of different treated HT1080 cells was done (18 samples)

The first percentage refers to the living and fluorescent cells and the second percentage to the total amout of living cells.

The data are listed this way:

1. Plate I(A is up)

A1A2A3
B1B2B3

1= Plate 1 A1 : 0% YFP-positive Cells (there were only a few cells in this sample)
2= Plate 1 A2 : 27,7% YFP-positve Cells from 73,3%
3= Plate 1 A3 : 17,3% " from 63,1%
4= Plate 2 A1 : 32,9% " from 75,3%
5= Plate 2 A2 : 27,2% " from 76,5%
6= Plate 2 A3 : 30,7% " from 73,4%
7= Plate 3 A1 : 26,8% " from 76,0%
8= Plate 3 A2 : 30,5% " from 74,2%
9= Plate 3 A3 : 30,7% " from 75,2%
10= Plate 1 B1 : 6,25% " from 36,1%
11= Plate 1 B2 : 6,42% " from 68,4%
12= Plate 1 B3 : 0,05% " from 89,5%
13= Plate 2 B1 : 20,5% " from 72,5%
14= Plate 2 B2 : 15,7% " from 73,6%
15= Plate 2 B3 : 0,02% " from 85,4%
16= Plate 3 B1 : 19,5% " from 73,3%
17= Plate 3 B2 : 20,8% " from 75,7%
18= Plate 3 B3 : 0,07% " from 84,8%


Conclusions

  • Higher amounts of Plasmids (24, 30µg) seems to have no obvious effect on YFP expression
  • Theres no difference in YFP expression comparing resuspended samples to not resuspended samples
  • The amount of dead HT cells is about 25%, it is not clear if it is either AAV induced or mechanic stress (Trypsin, washing procedure)

Next steps:

  • does the amount of GOI (ng plasmids) has an effect on YFP expression
  • compare transduced to non transduced cells (vitality), or in other words is the mechanic stress responsible for 25% dead cell ratio?
  • comparison of transduction efficiency of different virus stock production routines


14.7 Seeding AAV293 for TKGMK constructs


The motivation
We want to create the first viral particles with TKGMK as gene of interest.

The plan
30µg Plasmid were used (pHelper + pAAV_RC+ pAAV_RFC25_mgmk_TK30)
VIRUS no GOI :pHelper + pAAV_RC
VIRUS 1  :pHelper + pAAV_RC+ pAAV_RFC25_mgmk_TK30 clone 1 : P54
VIRUS 2  :pHelper + pAAV_RC+ pAAV_RFC25_mgmk_TK30 clone 2 : P55
VIRUS 3  :pHelper + pAAV_RC+ pAAV_RFC25_mgmk_TK30 clone 3 : P56


The results
Unfortunately the stocks never were used (exception: see following experiment, 7. august) because later on we noticed that the TKGMK plasmids were not in line with the RFC.



7.8 Seeding AAV293 for TKGMK and mVenus stocks

The motivation
We want to create new stock of AAV without GOI, with TK/GMK and stocks with different YFP-amounts to check if the amount of GOI is a critical step for transduction effency (transgene expression).

The plan

Plate pAAV_RC/µgpHelper/µgGOI/µg
13,3 3,3 no GOI
26,6 3,3 no GOI
33,3 3,3 3,3 TK_GMK clone1 (P54)
43,3 3,3 3,3 TK_GMK clone1 (P54)
53,3 3,3 3,3 TK_GMK clone2 (P55)
63,3 3,3 3,3 YFP
73,3 3,3 10 YFP
83,3 3,3 20 YFP
93,3 3,3 40 YFP
103,3 3,3 60 YFP


The transduction was performed according to standard protocol.

Plate 1:

1 2 3
A control, no cells 300µl virus 1 300µl virus 2
B control, no virus 600µl virus 1 600µl virus 2


Plate 2:

1 2 3
A control, no cells 300µl virus 3 300µl virus 4
B control, no virus 600µl virus 3 600µl virus 4


Plate 3:

1 2 3
A control, no cells 300µl virus 5 300µl virus 6
B control, no virus 600µl virus 5 600µl virus 6


Plate 4:

1 2 3
A control, no cells 300µl virus 7 300µl virus 8
B control, no virus 600µl virus 7 600µl virus 8


Plate 5:

1 2 3
A control, no cells 300µl virus 9 300µl virus 10
B control, no virus 600µl virus 9 600µl virus 10


Plate 6:

1 2 3
A control, no cells 300µl virus 3 300µl virus 4
B control, no virus 600µl virus 3 600µl virus 4


Plate 7:

1 2 3
A control, no cells 300µl virus 3 300µl virus 4
B control, no virus 500µl virus 3 500µl virus 4


Plate 8:

1 2 3
A control, no cells 300µl virus 5 300µl virus 5
B control, no virus 600µl virus 5 600µl virus 5


The test for functionality for TK GMK was done with the Prodrug Cymeven ganciclovir 500mg from Roche. The final concentration was 0,05 mM in the wells. After two days pictures were taken.




The results

As you can see, the TKGMK cell killing mechanism works! The samples with targeted mVenus constructs couldnt be checked because the FACS machine was not working. The fluorescence was checked with microscopy, the transduction efficiency is still low.

14.8 Seeding different amounts of AAV293 for transfection

The motivation
We want to know which confluence of AAV293 cells is optimal for AAV production.

The plan
We seed different amounts of cells in 10 cm2, and check the highest titer.

Plate amount of seeded AAV-293 cells
1100 000
2200 000
3400 000
4500 000
5800 000
61 000 000
71 200 000
81 500 000
91 750 000
101 750 000

The cells were transfected with 40µg standard CMV_YFP, 3,3µg Rep/Cap and 3,3µg pHelper.

Transduction was performed according to standard protocol.
Plate 1 YFP: 200.000 cells per well

1 2 3
A control, no cells 165µl virus (1) 165µl virus (2)
B control, no virus 165µl virus (1) 165µl virus (2)

Plate 2 YFP: 200.000 cells per well

1 2 3
A control, no cells 165µl virus (3) 165µl virus (4)
B control, no virus 165µl virus (3) 165µl virus (4)

Plate 3 YFP: 200.000 cells per well

1 2 3
A control, no cells 165µl virus (5) 165µl virus (6)
B control, no virus 165µl virus (5) 165µl virus (6)

Plate 4 YFP: 200.000 cells per well

1 2 3
A control, no cells 165µl virus (7) 165µl virus (8)
B control, no virus 165µl virus (7) 165µl virus (8)

Plate 5 YFP: 200.000 cells per well

1 2 3
A control, no cells 165µl virus (9) 165µl virus (10)
B control, no virus 165µl virus (9) 165µl virus (10)

The results
The FACS was still not available but we could easily detect a significant higher YFP expression (70-80%) at the following positions:

  • Plate 1: A2 and B2, A3 and B3
  • Plate 2: A2 and B2, A3 and B3

Therefore we conclude that we have to seed between 100000 and 500000 cells for optimal virus production precedure.

17.8 transduction with viral stocks 20 µg and 40 µg GOI-plasmid RESULTS ? PLASMID NUMBERS ? MOTIVATION ?

The Motivation
We want to FACS our stocks to get valid data for further investigation of optimal virus assembly. Therefore created stocks with 20 and 40 µg CMV_mVenus.
The Plan

  • 1. plate 50.000 cells, YFP
    A control no cells 300 µl virus (40 µg YFP) 300 µl virus (20 µg YFP)
    B control no virus 500µl P38 (pAAV2_mVenus) 1000µl P38 (pAAV2_mVenus)
  • 2. plate 50.000 cells, YFP
    A control no cells 300 µl virus (40 µg YFP) 300 µl virus (20 µg YFP)
    B control no virus 500µl P38 (pAAV2_mVenus) 1000µl P38 (pAAV2_mVenus)
  • 3. plate 100.000 cells, YFP
    A control no cells 300 µl virus (40 µg YFP) 300 µl virus (20 µg YFP)
    B control no virus 500µl P38 (pAAV2_mVenus) 1000µl P38 (pAAV2_mVenus)
  • 4. plate 100.000 cells, YFP
    A control no cells 300 µl virus (40 µg YFP) 300 µl virus (20 µg YFP)
    B control no virus 500µl P38 (pAAV2_mVenus) 1000µl P38 (pAAV2_mVenus)

    The Results
    Although we were told that the FACS would be available in time it wasn't. So the cells could unfortunately not be checked for their YFP expression =(.

    16.8 Seeding AAV293 for transfection with new R/C

    The motivation
    We want examine the functionality of different R/C constructs and the new eGFP gene of interest. This transfection was performed with new AAV-293 cells which were thawed.


    The plan

    • 2x106 cells were seeded
    • used plasmids:
      • P50 c= 429 ng/µl (RC)
      • P64 c= 500 ng/µl (pHelper)
      • P229 c= 162 ng/µl (GOI=YFP)
      • P228 c= 540 ng/µl (GOI=eGFP)
      • P158a c= 1800ng/µl (RC mutant)
      • P158a c= 1770ng/µl (RC mutant)

    The transfection was performed according to standard protocol.

    • 1. plate: Lipo-Transfection => named Lipo
    • 2. plate: Lipo-Transfection => named Lipo
    • 3. plate: 3,3 µg (RC), 3,3 µg (pHelper), 3,3 µg (YFP) => was not used for transduction
    • 4. plate: 10 µg (RC), 10 µg (pHelper), 3,3 µg (YFP) => named CaCl2
    • 5. plate: 10 µg (RC mutant P158a), 10 µg (pHelper), 3,3 µg (YFP)=> CaCl2 10 µg RC mutant P158a
    • 6. plate: 10 µg (RC mutant P158b), 10 µg (pHelper), 3,3 µg (YFP)=> CaCl2 10 µg RC mutant P158b
    • 7. plate: 3,3 µg (RC mutant P158a), 3,3 µg (pHelper), 3,3 µg (YFP)=> CaCl2 3,3 µg RC mutant P158a
    • 8. plate: 3,3 µg (RC mutant P158b), 3,3 µg (pHelper), 3,3 µg (YFP)=> CaCl2 3,3 µg RC mutant P158b
    • 9. plate: 10 µg (RC), 10 µg (pHelper), 3,3 µg (eGFP)=> CaCl2 eGFP 3,3 µg
    • 10. plate: 10 µg (RC), 10 µg (pHelper), 10 µg (eGFP)=> CaCl2 eGFP 10 µg
    • 11. plate: 10 µg (RC), 10 µg (pHelper), 20 µg (eGFP)=> CaCl2 eGFP 20 µg
    • 12. plate: 10 µg (RC), 10 µg (pHelper), 40 µg (eGFP)=> CaCl2 eGFP 40 µg

    The results

    Freiburg10 23.8.2010 FACS eGFP Lipofection 200.000.jpg

    As you can see the eGFP constructs worked very well. And even the transduction efficiency of the standard R/C is quite good, the conclusion is that in previous transfections the AAV293 cells were to confluent so their transfection capability. So the conclusion is, that the confluence of the cells is crucial! It also seems that our used amounts of plasmids had no decisive effect on the YFP expression.

    20.8

    The Motivation
    Seeding HT1080 for transfection with viral stocks from 18.8
    The Plan
    We harvest four T75 flasks and seed them into 6er dishes (200.000 cells in each well)
    the Results


    The Facs data at 22.8

    19.8 Seeding AAv293 for transfection with different HBS buffers

    The Motivation
    We want to try different 2xHBS Buffers (pH) and their influence on transfection efficiency!

    The Plan

    We try 5 different 2xHBS buffers:

    • pH: 7.06
    • pH: 7.08
    • pH: 7.10
    • pH: 7.12
    • pH: 7.14


    Used Plasmids: Standard protocol: 10µg of each plasmid

    • GOI: mVENUS => P262, conc:1148ng/µl; used amount: 8,71µl
    • GOI: TKGMK => P82b, conc:1500ng/µl; used amount: 6,67µl
    • pHELPER => P64, conc:503ng/µl; used amount: 20µl
    • RepCap => 10.8: 1348ng/µl; used amount: 7,41µl


    Eight new viral stocks were made with pHelper:20µl and RepCap:7,41µl each:

    1. mVenus:8,71µl; pH of 2xHBS:7,06
    2. mVenus:8,71µl; pH of 2xHBS:7,08
    3. mVenus:8,71µl; pH of 2xHBS:7,10
    4. mVenus:8,71µl; pH of 2xHBS:7,12
    5. mVenus:8,71µl; pH of 2xHBS:7,14
    6. TKGMK:6,67µl; pH of 2xHBS:7,08
    7. TKGMK:6,67µl; pH of 2xHBS:7,10
    8. TKGMK:6,67µl; pH of 2xHBS:7,12


    • Transduction of three 6-well plates:

    Plate 1 YFP: 150.000 cells per well

    1 2 3
    A control, no cells 500µl virus (1) 500µl virus (2)
    B control, no virus 500µl virus (1) 500µl virus (2)

    Plate 2 YFP: 150.000 cells per well

    1 2 3
    A control, no cells 500µl virus (3) 500µl virus (4)
    B control, no virus 500µl virus (3) 500µl virus (4)

    Plate 3 YFP: 200.000 cells per well

    1 2 3
    A control, no cells 500µl virus (5) 500µl virus (9)
    B control, no virus 500µl virus (9) 500µl virus (5)


    • (1)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,06
    • (2)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,08
    • (3)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,10
    • (4)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,12
    • (5)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,14
    • (9)= 10µg RC, 10µg pHelper, 3,3µg GOI (eGFP)


    the Results
    AAV-Harvesting is at 24.8, same day Transduction and FACS will be done at 26.8

    Freiburg10 26.8.2010 FACES different 2xHBS buffers.jpg

    As you can see the 2xHBS with pH 4.10 performed best, in future experiments this buffer will be used.

    Checking transduction efficiency via fluorescence microscopy

    The motivation

    The transduction efficiency from the viral stocks which were created with different amounts of AAV293 was checked.

    The plan

    1. plate 1:
      • stock 1 (with 100.000 cells)
      • stock 2 (with 200.000 cells)
    2. plate 2:
      • stock 3 (with 400.000 cells)
      • stock 4 (with 500.000 cells)
    3. plate 3:
      • stock 5 (with 800.000 cells)
      • stock 6 (with 1.000.000 cells)
    4. plate 4:
      • stock 7 (with 1.200.000 cells)
      • stock 8 (with 1.500.000 cells)
    5. plate 5:
      • stock 9 (with 1.750.000 cells)
      • stock 10 (with 1.750.000 cells)

    The results

    the optimal confluence of AAv293 cells is between 100 000 and 800 000 cells. This will be the field of investigation in the next experiments

    25.8: Transfection of AAV293 with different amounts of cells, and two plasmid concentrations

    The motivation

    We want to define the final amount of AAV293 per 10 cm2 for optimal AAV-Production

    The plan

    The following amount of cells were seeded in 10 cm2:

    1. 100.000
    2. 100.000
    3. 200.000
    4. 200.000
    5. 300.000
    6. 300.000
    7. 400.000
    8. 400.000
    9. 500.000
    10. 500.000
    11. 600.000
    12. 600.000
    13. 700.000
    14. 700.000


    10µg RC P158a four times mutant, 10µg pHelper, 3,3 µg mVenus P162 were pipetted on plates: 2, 4, 6, 8, 10 , 12, 14
    3,3µg RC P158a four times mutant, 3,3µg pHelper, 3,3 µg mVenus P262 were pipetted on plates: 1, 3, 5, 7, 9, 11, 13


    Days 22.8 23.8 24.8 25.8 26.8 27.8 28.8 29.8 30.8
    Action seeding AAV293 - Transfection - - Seeding HT Harvest + Transduction - FACS

    The results

    Freiburg10 30.2010 FACS number of Cells and Beas construct.jpg
    We dont really know the reason for the quite low average YFP expression, but the remarkable note is, that the construct (pSB1C3_leftITR_CMV_betaglobin_mVenus_hGH_rightITR) fusioned from the created Biobricks still works!



    30.8 Seeding AAV293 for 10xTransfection


    The motivation
    We want to create ten hypothetical identical viral stocks to estimate the standard deviation.

    The plan

    Days 30.8 31.8 1.9 2.9 3.9 4.9 5.9 6.9
    Action seeding AAV293 - Transfection - Seeding HT Harvest + Transduction FACS


    Transfection will be done with:

    • RepCap:P357 10µg =>conc.:1274,8ng/µl used amount: 7,84µl
    • pHelper:P356 10µg =>conc.:1068ng/µl used amount: 9,36µl
    • mVenus:P261 => excel sheet P263: 10µg =>conc.:979ng/µl used amount: 10,21 µl


    0,5 ml of each stock become deepfreeze in.

    One stock will be completely used for Transduction 9,5 ml (rest of the stock) * 0,5 ml (amount per transduction) => 19 values for estimating standard derivation.

    XXXXXXX getting valide data of 10µg samples


    The motivation
    we want to check the YFP expression
    The plan


    Days 30.8 31.8 1.9 2.9
    Action seeding HT Transduction - FACS


    One stock will be completely used for Transduction 9,5 ml (rest of the stock) * 0,5 ml (amount per transduction) => 19 values for estimating standard derivation.

    the results

    28.8 Seeding AAV293 for checking functionality of RC vector

    The motivation
    We want to check different R/C constructs, additionally we check if the amount of viral.!!!!!!!!!!!!!!!!!

    The plan

    Days 28.8 29.8 30.8 31.9 1.9 2.9 3.9 4.9 5.9 6.9
    Action seeding AAV293 - - Transfection - - Harvest+Seeding HT Transduction - FACS


    Transfection was done with:

    • RepCap:P326 => 2481 ng/µl used amount: 4µl => 10µg
    • RepCap:P325 => 2051 ng/µl used amount: 4,87µl => 10µg
    • pHelper:P356 => 684 ng/µl used amount: 414,62µl => 10µg
    • mVenus:P262 => 1148 ng/µl used amount: 8,7µl => 10µg



    The results

    800px

    4.9 Seeding cells for checking constructs (GOIs) with/without HGH and beta globin and reassembled as control


    The motivation
    We want to check if these reassmbled constructs (GOIs) still work!

    • P269 lITR_CMV_beta-globin_mVenus_HGH_rITR = 325 ng/µl => 9,66 µl
    • P270 lITR_CMV_beta-globin_mVenus_HGH_rITR = 561 ng/µl => 7,26 µl
    • P377 lITR_CMV_mVenus_HGH_rITR = 325,04 ng/µl => 30,76 µl
    • P378 lITR_CMV_beta-globin_mVenus_rITR = 561 ng/µl => 17,8µl

    All constructs are completed with p50 R/C =>> 26,45 µl and pHELPER 14,61µl

    The plan

    Days 4.9 6.9 7.9 8.9 9.9 10.9 11.9 12.9
    Action seeding AAV293 - Transfection - Seeding HT Harvest + Transduction FACS


    The results

    6.9 checking five ganciclovir concentrations for two day incubation approach optimal medication


    The motivation
    we want to check the optimal ganciclovir concentration, we use the TK/GMK Stocks (10 µg from each plasmid) from 24.8 with Buffer pH 7,10 and the pH12 stock.
    The plan


    Days 3.9 4.9 5.9 6.9
    Action seeding HT Transduction - FACS


    We want to use five different ganciclovir concentrations (the concentrations are absolute to the volume in the wells):

    • 48.5µM
    • 97 µM
    • 0.485 mM
    • 0.97 mM
    • 4.85 mM


    the results
    Freiburg10 CC 6.9 Checking Ganciclovir concentrations-CHART.jpg

    15.9 Seeding AAV293 for testing our Affibody and other VP-mVenus constructs


    The motivation
    The pCerulean_VP1up_mVenus_Vp2/3 Construct will be tested in three different compositions.

    The plan
    We want to test these constructs:

    • pCerulean_VP1up_NLS_Affibody_VP2/3
    • pCerulean_VP1up_His_VP2/3
    • pCerulean_VP1up_mVenus_Vp2/3
    • The His-tag is for purify our constructs and in this case we want to test, if the particles are still infectious. Construct with the affibody will be tested for functionality and even for their better affinity to our EGFR overexpressing cell line A431.


    The results
    Interpretation and discussion of our results.

    19.9 Seeding AAV293 for checking two different Rep/Cap Constructs


    The motivation
    During the project 22 silent nucleotide exchange mutations were introduced into the capsid coding construct to make it compatible with the RFC standards and to have single cutting restriction enzymes flanking the 453 and the 587 loop sequence. Two point mutations had to be dismissed, because either a first test transduction showed that the construct was not working anymore or the insertion of the synthesized gene posed serious problems, because the restriction enzyme did not work.
    The plan
    Transfection and transduction was performed according to standard protocol.


    The results
    Freiburg10 CC 19.9 FACS Checking functionality of REP CAP.jpg

    Finally, we have a construct that is shown to produce infectious particles comparable to the current AAV systems and carries 20 point mutations. Now we can announce that the Adeno-associated Virus is compatible to the RFC standard and the idea to replace the loop sequences via ViralBricks works!

    19.9 Seed AAV293 for testing pTERT promoter


    The motivation
    We create viral stocks with pTERT_mVenus as GOI to test if this promoter works tissue specific
    The plan
    In this section, the design of the experiment is explained.
    The results
    Interpretation and discussion of our results.

    20.9 Seeding AAV293 for creating first VP-mVenus-fusion constructs


    The motivation
    This short introduction provides an inside into our thoughts for this experiment.
    The plan
    In this section, the design of the experiment is explained.
    The results
    Interpretation and discussion of our results.


    22.9 Seeding AAV293 for transfection with different mVenus constructs for checking specific promoter activity


    The motivation
    We want to check if the CMV and pTERT promoters work equaly in the AAV293, A431 and HT1080 cells. So we transfect them via standard transfection CaCl2. It is obvious that the individual cell lines are not equaliy competent to transfection (the AAV293 are optimised for transfection). It seems that this promoter is not that active in AAV293 cells.
    The plan
    We transfected the three cell lines A431, AAV293 and HT1080 with following three constructs:

    • CMV_mVenus
    • CMV_eGFP
    • pTERT_mVenus


    Remember, that mVenus and eGFP have the exact same excitation wavelenght. We took the pictures with the same parameters, but saved the data in the wrong formate (.tif instead of .zvi), so we werent able to change the YFP expression from green to yellow.


    Days 22.9 23.9 24.10 25.10 26.10
    Action seeding AAV293 - Transfection fluorescence microscopy fluorescence microscopy



    The results
    As excepted, the expression of the CMV_mVenus and CMV_eGFP was very high even at 16h post transfection. The pTERT_mVenus construct worked aswell, but significantly weaker! Problematic is the fact, that there was no expression in HT1080 and A431 detectable. Due the fact that these cell lines are not optimized for CaCl2 transfection. We can't evaluate if the bad transfection efficiency or the low promoter activity of pTERT are responsible for the results.

    22.9 Testing of Hannas 6 VP-constructs with different compositions (10%, 25%, 50% and 75% fractions) with a VP2-knockout construct


    The motivation
    Test the following 18 constructs for functionality on A431 and HT1080 cells. Each of these constructs getting transfected in different compositions 25%, 50%, 75% and 90% with VP2_knockout 75%. In this way we are able to create viral particles with this ratios of VP proteins. We hope that the created particles are still infectious.

    • pCerulean_CFP_MiddleLinker_VP2/3insCap P528
    • pCerulean_Zegfr:1907_ShortlLinker_VP2/3insCap P527
    • pCerulean_6xHis_Middlelinker_VP2/3insCap P534
    • pCerulean_Zegfr:1907_Middlelinker_VP2/3insCap P535
    • pCerulean_Zegfr:1907_SEG_VP2/3_Capins 10:90 P502
    • pCerulean_Zegfr:1907_LongLinker_VP2/3_CapIns P503


    The plan

    Days 20.9 21.9 22.9 23.9 24.9 25.9 26.9 27.9 28.9
    Action seeding AAV293 - Transfection - - Seeding HT Harvest + Transduction - FACS


    The results
    Freiburg 10 FACS Linker Libary.jpg
    Obviously the constructs still work!

    22.9 Seeding cells for testing pTERT_mVenus in R/C P326 and P431


    The motivation
    We want to check if the pTERT-promoter is realiable for tumor specific gene expression, we use two different kinds of R/C.

    The plan

    Days 22.9 23.9 24.9 25.9 26.9 27.9 28.9 29.9 30.9 1.10 2.10 3.10 4.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest - - Seeding HT, A293 and A431 Transduction FACS


    The results

    29.9 Checking location of VP proteins via fluorescence microscopy and checking fractions of centrifugation steps via fluorescence spectrometer


    The motivation: We want to figure out if it is possible to purify our viral stocks via centrifugation with 10.000 g and/or 20.000 g. In theory/ according to the literature the viral particles should be in the cells and attached to the HSPGs at the cellular surfaces.
    The plan: Two different viral stocks were prepared:

    Stock 1 with VP2-mVenus-fusion-Capsid loaded with TKGMK (4 wells from a 6 well plate)

    • R/C 1: 50% pCerulean_VP1up_NLS_mVenus_Vp2/3 P501
    • R/C 2: 50% Rep/Cap2: P449 pAAV_RC_4fachmut_VP1-ko:
    • GOI: TKGMK: P82.b
    • pHelper


    Stock 2 "standard" virus (4 wells from a 6 well plate)

    • R/C 1 P486
    • GOI: TKGMK: P82.b
    • pHelper

    These two stocks got harvested according to standard protocol (scratching cells, transfer them in to 15 ml falcons, resuling 12ml solution total). After centrifugation (10 min 200g), the supernatant got transferred into two new 15 ml falcons and the pellets were resuspended with 10 ml DMEM Medium. The Stocks got freezed thawed two times so finally there were:

    1. DMEM as negative control
    2. resuspended Pellet with mVenus-fusioned viral capsids
    3. resuspended Pellet with "standard virus"
    4. supernatant with mVenus-fusioned viral capsids
    5. supernatant with "standard virus"


    The fluorescence of each stock was measured via spectrometer. After that, stocks 2 and 4 were centrifugated 10min with 10.000 g followed by an other fluorescence measuring. Finally the stocks got spin down with 20.000 g for 10 min
    The results:



    Freiburg10 mVenus VP fusion fluorescence centrifugation experiment graph.jpg


    Freiburg10 mVenus VP fusion fluorescence centrifugation experiment 526nm.jpg


    The conclusions: The highest amount of fluorescence was measured in the supernatant, the individual centrifugation steps had no decrease in fluorescence as consequence!


    Keep in mind, without further investigation it is not valid to say that we can purify our stocks via 10-20.000 g centrifugation steps, because we dont know if the viral capsids are still intact! The FACS analysis are not sufficient enough to make a decision, because our last samples had YFP as GOI (=> so efficient cell sorting was not possible). We need to do qPCRs to make a valid evidence.

    30.9 Production of new Standard mVenus Vector


    The motivation
    The AAV2 with 4 point mutations, inserted rep and cap and remutated KpnI restriction has to be checked for its functionality in order to compare it with the wild type AAV2. Hopefully there will be no significant difference.
    The plan
    After the "delay" 200.000 A431 and HT1080 cells were seeded and transduced on the following day with 0,5 ml of this AAV2 mutant.

    Days 30.9 1.10 2.10 3.10 4.10 5.10 6.10 7.10 8.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest delayed because of cell death delayed because of cell death


    The results
    Interpretation and discussion of our results.

    30.9 Seeding AAV293 for production of standard TKGMK vector


    The motivation
    We want to create a big amount of viral particles with TKGMK as gene of interest for using it as an standard vector for the MTT-assay.
    The plan


    Days 30.9 1.10 2.10 3.10 4.10 5.10 6.10 7.10 8.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest delayed because of cell death delayed because of cell death


    The results
    The viral stocks were harvested efficiently and are ready to use.

    30.9 Seeding AAV293 for production of vectors with mVenus missing beta globin


    The motivation
    Beta globin is said to improve (stratagene) the expression so we expect a worse mVenus (reportergene) expression compared to the standard AAVs. Therefore the seeded A431 and HT1080 cells were transduced with a AAV2 mutant missing beta-globin.
    The plan
    Ater the "delay" 200.000 HT1080 and A431 cells were seeded and transduced with 0,5 ml AAV2 mutant on the following day.

    Days 30.9 1.10 2.10 3.10 4.10 5.10 6.10 7.10 8.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest delayed because of cell death delayed because of cell death


    The results
    Interpretation and discussion of our results.

    30.9 Seeding AAV293 for production of vectors with mVenus missing HGH


    The motivation
    HGH is responsible for the mRNA polyadenylation of the virus so we expect expect a worse mVenus (reportergene) expression compared to the standard AAVs. Therefore the seeded A431 and HT1080 cells were transduced with a AAV2 mutant missing HGH.
    The plan
    After the "delay" 200.000 A431 and HT1080 cells were seeded and transduced on the following day with 0,5 ml AAV2 mutant missing HGH.

    Days 30.9 1.10 2.10 3.10 4.10 5.10 6.10 7.10 8.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest delayed because of cell death delayed because of cell death


    The results
    Interpretation and discussion of our results.

    30.9 Seeding AAV293 for testing RC with HSPG knockout for functionality


    The motivation
    The primary AAV2 receptor (the HSPG receptor) was knocked out so we expect a worse tranduction rate (about 0,3 to 0,4 of the standard transduction rate, assuming that there are HSPGs on the HT1080 and A431 cell surface). The worse the better.
    The plan
    After the "delay" 200.000 A431 and HT1080 cells were seeded and transduced on the following day with 0,5 ml AAV2 mutant with a HSPG-receptor knockout.

    Days 30.9 1.10 2.10 3.10 4.10 5.10 6.10 7.10 8.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest delayed because of cell death delayed because of cell death


    The results

    Freiburg10 HT1080 missing HSPG binding motif.png
    Freiburg10 A431 missing HSPG binding motif.png


    There is a significant difference in transduction efficiency. The actual reduction is even higher than expected, according to literature it should be around 60%, we reached 80%. We measured via qPCR the amount of viral particles for each stock, and they are nearly the same the HSPG Knockout has 2*107particles per ml , the stock with HSPG-binding motif has 4.5*106 particles per ml.

    30.9 Seeding AAV293 for testing RC WITHOUT HSPG knockout for functionality


    The motivation
    This short introduction provides an inside into our thoughts for this experiment.
    The plan
    In this section, the design of the experiment is explained.

    Days 30.9 1.10 2.10 3.10 4.10 5.10 6.10 7.10 8.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest delayed because of cell death delayed because of cell death


    The results
    See 30.9 Seeding AAV293 for testing RC with HSPG knockout for functionality

    12.10 Seeding AAV293 cells for transfection with VP-BAP


    The motivation
    We want to create a viral stock for purification and biotinylation, the ratio of the Rep/Cap plasmids is 1:1.
    The plan
    Transfection was performed according to standard protocol:

    • Gene of interest: mVenus
    • R/C: pSB1C3-001_pCMV_[AAV]VP123_587_BAP in cotransfection with pSB1C3_001_RC_IRCK_P5tataless clone 1
    Days 12.10 13.10 14.10 15.10 16.10 17.10 18.10 19.10 20.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest + Transduction - FACS

    The results

    12.10 Seeding AAV293 cells for transfection with mVenus as gene of interest and pCerulean_VP1up_NLS_mVenus_VP2/3_HSPG-KO


    The motivation
    We want to create a viral stock for purification and biotinylation, the ratio of the Rep/Cap plasmids is 1:1.
    The plan
    Transfection was performed according to standard protocol:

    • Gene of interest: mVenus
    • R/C: pCerulean_VP1up_NLS_mVenus_VP2/3_HSPG-KO in cotransfection with pSB1C3_001_RC_IRCK_VP1-ko_HSPG-ko_P5tataless cl1
    Days 12.10 13.10 14.10 15.10 16.10 17.10 18.10 19.10 20.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest + Transduction - FACS

    The results


    12.10 Seeding AAV293 cells for transfection with mVenus as GOI and CFP_Middlelinker_VP2/3_HSPG-KO


    The motivation
    We want to create a viral stock for purification and biotinylation, the ratio of the Rep/Cap plasmids is 1:1.
    The plan
    Transfection was performed according to standard protocol:

    • Gene of interest: mVenus
    • R/C: CFP_Middlelinker_VP2/3_HSPG-KO in cotransfection with pSB1C3_001_RC_IRCK_P5tataless clone 1


    Days 18.10 19.10 20.10 21.10 22.10 23.10 24.10 25.10 26.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest + Transduction - FACS

    The results

    17.10 Production of AAV2 with 587-His

    Investigator Patrick

    The motivation
    We wanted to produce AAV2 which could be purified via affinity purification. Therefore 10 x 10cm^2 were seeded with AAV-293. Five of these plates contained serum-free medium and cells accustomized to this.
    Used plasmids:

    • pHelper
    • pSB1C3_leftITR_CMV_betaglobin_mvenus_hGH_rightITR (P541)
    • 50% pSB1C3_001_RC_IRCK_P5tataless (P712)
    • 50% pSB1C3-001_pCMV_[AAV2]VP123_587_HIS (P638)


    The plan
    In this section, the design of the experiment is explained.

    Days 17.10 19.10 20.10 21.10 22.10 23.10 24.10 25.10 26.10
    Action seeding AAV293 Transfection - Seeding HT AAV2 harvest Transduction FACS

    The results
    Interpretation and discussion of our results.


    18.10 Seeding AAV293 cells for transfection Superconstructs


    The motivation
    We want to create a viral stock for purification and biotinylation, the ratio of the Rep/Cap plasmids is 1:1.
    The plan
    Transfection was performed according to standard protocol:

    Gene of interest: CMV_mVenus

    • pSB1C3_CMV_Zegfr:1907_MiddleLinker_VP2/3_587-KO_6xHis in ratio 1:1 pSB1C3_001_RC_IRCK_VP2-ko_HSPG-ko_P5tataless cl1
    • pSB1C3-001_pCMV_[AAV2]VP123_453_Z34C in ratio 1:1 pSB1C3_001_RC_IRCK_HSPG-ko_P5tataless_RFC10
    • pSB1C3_001_CMV_VP123_587-KO_Z34C in ratio 1:1 pSB1C3_001_RC_IRCK_HSPG-ko_P5tataless_RFC10
    • pSB1C3_001_CMV_VP123_587-KO_Z34C_spacer in ratio 1:1 pSB1C3_001_RC_IRCK_HSPG-ko_P5tataless_RFC10

    Gene of interest: pTERT_TKGMK

    • pSB1C3_CMV_Zegfr:1907_MiddleLinker_VP2/3_587-KO_6xHis in ratio 1:1 pSB1C3_001_RC_IRCK_VP2-ko_HSPG-ko_P5tataless cl1

    Gene of interest: CMV_TKGMK

    • pSB1C3_CMV_Zegfr:1907_MiddleLinker_VP2/3_587-KO_6xHis in ratio 1:1 pSB1C3_001_RC_IRCK_VP2-ko_HSPG-ko_P5tataless cl1

    Days 18.10 19.10 20.10 21.10 22.10 23.10 24.10 25.10 26.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest + Transduction - FACS

    The results


    18.10 Seeding AAV293 cells for transfection with Cytosindeaminase


    The motivation
    We want to create a viral stock with Cytosindeaminase as gene of interest.

    The plan
    Transfection was performed according to standard protocol:
    Gene of interest: CMV_Cytosindeaminase

    • P712

    Gene of interest: pTERT_Cytosindeaminase

    • P712


    Days 18.10 19.10 20.10 21.10 22.10 23.10 24.10 25.10 26.10
    Action seeding AAV293 - Transfection - - Seeding HT Harvest + Transduction - FACS

    The results

    Experiment


    The motivation
    The plan

    Days 22.9 23.9 24.9 25.9 26.9 27.9 28.9 29.9 30.9
    Action seeding AAV293 - Transfection - - Seeding HT Harvest + Transduction - FACS

    The results

    Citations


    [1] Media:Freiburg10_Stratagene_AAV_helper_free_manual.pdf
    [2] [http://www.copewithcytokines.de/cope.cgi?key=A431 Titel einfügen]
    [3] Read, A. P.; Strachan, T. (1999). "Chapter 18: Cancer Genetics". Human molecular genetics 2. New York: Wiley. ISBN 0-471-33061-2.
    [4] [http://www.biomol.de/dateien/infos_nr778.gif Titel einfügen]
    [5] Media:Freiburg10 Titration of AAV-2 particles via a novel capsid ELISA.pdf