Team:Macquarie Australia/Notebook

From 2010.igem.org

(Difference between revisions)
Line 424: Line 424:
-
<b>Figure 2.<B> GelRed stained 1.2% agarose gel of initial PCR of <i>A. tumefaciens </i> using various primers. <p>
+
<b>Figure 2.</b> GelRed stained 1.2% agarose gel of initial PCR of <i>A. tumefaciens </i> using various primers. <p>
-
In lanes 1 and 11 there is a 1kb ladder. In lane 2 is the DNA1.2 template with F1 and R1 primer pair. <p>In lane 3 is the DNA2.2 template with F1 and R1 primer pair. In lane 4 is the DNA1.2 template with F2 and R1 primer pair. In lane 5 is the DNA2.2 template with the F2 and R1 primer pair. In lanes 6 and 7 there is nothing loaded as the wells were damaged. In lane 8 there is the DNA1.2 template with F3 and R1 primer pair. In lane 9 there is the DNA2.2 template with the F3 and R1 primer pair and in lane 10 there is the ssH2O negative control. A product is seen in lane 9 – this is the DNA2.2 template with the F3 and R1 primers! This means that we have a <i> A. tumefaciens bacteriophytochrome </i> product with a ribosome binding sight inserted.  
+
In lanes 1 and 11 there is a 1kb ladder. In lane 2 is the DNA1.2 template with F1 and R1 primer pair. <p>In lane 3 is the DNA2.2 template with F1 and R1 primer pair. In lane 4 is the DNA1.2 template with F2 and R1 primer pair. In lane 5 is the DNA2.2 template with the F2 and R1 primer pair. In lanes 6 and 7 there is nothing loaded as the wells were damaged. In lane 8 there is the DNA1.2 template with F3 and R1 primer pair. In lane 9 there is the DNA2.2 template with the F3 and R1 primer pair and in lane 10 there is the ssH2O negative control. A product is seen in lane 9 – this is the DNA2.2 template with the F3 and R1 primers! <p><u>This means that we have a <i> A. tumefaciens bacteriophytochrome </i> product with a ribosome binding sight inserted. </u>
</u>
</u>

Revision as of 01:47, 14 October 2010

PROJECT LAB BOOK

Welcome to the Macquarie University project lab book page!

Here you will find a day-by-day account of our triumphs and failures.

A day-by-day progress for Agrobacterium Tumefaciens Bacteriophytochrome

20th August 2010

Genomic DNA extraction

  • A. tumefaciens genomic DNA extracted using the Invitrogen PureLinkTM Genomic DNA Purification kit as per the manufacturer’s protocols.

  • The extractions were run on a GelRed stained 1% agarose gel and photo taken for visualization (see below).

  • A NanoDrop spectrophotometer reading was also recorded to check the quality of the extracted genomic DNA.

  • The extraction was successful for all A. tumefaciens cell lysate samples (labeled DNA1.1, DNA1.2, DNA2 (See figure below)

    • A. tumefaciens genomic DNA extraction agarose results:

    All four DNA samples show a smear of gDNA. Because the samples were treated with RNase there is no band indicative of RNA visible = SUCCESS!

    FIGURE ONE ***** Results of A. tumefaciens genomic DNA extraction ***

    Figure 1. GelRed stained 1% agarose gel of genomic DNA extraction from A. tumefaciens.

    In lanes 1 and 11 there is a 1kb ladder. In lane 2 is the DNA1.1 flow through, lane 3 is the DNA2.2 flow through, lane 4 is the DNA2.1 flow through and lane 4 in the DNA2.2 flowthrough. All four samples show a smear that is indicative of genomic DNA. The extraction has been successful.

    Nanodrop absorbance readings:

    Genomic DNA sample 260/280 OD ratio Concentration (ng/mL)
    DNA1.1 1.88 351.5
    DNA1.2 1.98 203.1
    DNA2.1 2.14 738.9
    DNA2.2 2.16 709.7

    Overall, the Nanodrop readings show that we have obtained good DNA concentration with minimal protein contamination

    = SUCCESS!

    27th August 2010

    Primer design

  • Various primers were designed manually and using Primer 3 Software package for PCR amplification.

  • The primers were ordered and supplied through XXXXXXXXXXXXXXXXX.

  • There was an array of various primers ordered for amplification of different products. The details of the primers are described below.

    • Fwd and Rvs primers for amplification of the full length A. tumefaciens BphP gene:

    Primer name Primer Sequence
    F1 (AT-FWD-1) 5’-ATG AGT TCA CAT ACG CCG-3’
    R1 (AT-RVS-1) 5’-TCA GGC AAT TTT TTC CTC-3’

    Fwd and Rvs primers for amplification of the full length A. tumefaciens BphP gene for insertion in the operon BEFORE the HO gene:

    Primer name Primer Sequence
    F2 (AT-BHO-F) 5’- AAG GAG ATA TAC ATA TGA TGA GTT CAC ATA CGC CG – 3’
    R3 (AT-BHO-R) 5’- AAG TTG ACA CTC ATA TGA GCC CTC CTT TCA GGC – 3’

    Fwd and Rvs primers for amplification of the full length A. tumefaciens BphP gene:

    Primer name Primer Sequence
    F1 (AT-FWD-1) 5’-ATG AGT TCA CAT ACG CCG-3’
    R1 (AT-RVS-1) 5’-TCA GGC AAT TTT TTC CTC-3’

    Fwd and Rvs primers for amplification of the full length A. tumefaciens BphP gene for insertion in the operon AFTER the HO gene in the operon:

    Primer name Primer Sequence
    F4 (AT-AHO-F) 5’- CCG AAG GCT AGG ATC CAG GAG GGC TGC TAT GAG – 3’
    R2 (AT-AHO-R) 5’- GTT AGC CGG ATC CTC AGG CAA TTT TTT CCT – 3’

    Fwd and Rvs primers for amplification of the full length A. tumefaciens BphP gene for insertion in the operon AFTER the HO gene as well as the addition of a ribosome binding site or Shine Delgano sequence:

    Primer name Primer Sequence
    F3 (AT-FWD-RBS) 5’- AGG AGG GCT ATG AGT TCA CAT ACG CCG -3’

    Initial PCR

  • The reaction mastermix for the initial PCR was set up as per the following recipe (per sample):
    • Mastermix: Amount per sample (ul)
    Clean H2O 13.75
    10x Buffer 2.00
    Polymerase enzyme 0.25
    dNTP 1.00
    Fwd primer 1.00
    Rvs primer 1.00
    Genomic DNA 1.00
    Total 20.00

    The PCR program was set up as per the following:

    1. 94˚C for 2 minutes
    2. 94˚C for 30 seconds
    3. 60˚C for 30 seconds
    4. 72˚C for 2 minutes & 30 seconds

      5. (This was repeated for another 25 cycles)

    5. 72˚C for 10 minutes
    6. 4˚C to end.

  • Different combinations of the primers were used for the initial PCR reaction (see below ‘Experimental Design’ section following)
  • Not all possible primer combinations were used due to limitations on the amount of polymerase enzyme available to us
  • The PCR products were run on a 1.2% GelRed stained agarose gel for visualisation (see picture of gel below).

    • Experimental Design – Primer combinations:

    Template DNA Fwd Primer Rvs primer
    DNA1.2 F1 (AT-FWD-1) R1(AT-RVS-1)
    DNA2.2 F1 (AT-FWD-1) R1(AT-RVS-1)
    DNA1.2 F2 (AT-BHO-F) R1(AT-RVS-1)
    DNA2.2 F2 (AT-BHO-F) R1(AT-RVS-1)
    DNA1.2 F3 (AT-FWD-RBS) R1(AT-RVS-1)
    DNA2.2 F3 (AT-FWD-RBS) R1(AT-RVS-1)
    SSH20 (negative control) F1 (AT-FWD-1) R1(AT-RVS-1)

  • A band was seen in lane 6. This lane was using the primer and DNA template combinations of DNA2.2, F3 and R1 primers

    = SUCCESS!!!

  • A PCR product is seen in lane 6 – this is the DNA2.2 template amplified with the F3 (AT-FWD-RBS) and R1 (AT-RVS-1) primers

    = SUCCESS!!

    • FIGURE two ***** Results of the initial PCR ***

    Figure 2. GelRed stained 1.2% agarose gel of initial PCR of A. tumefaciens using various primers.

    In lanes 1 and 11 there is a 1kb ladder. In lane 2 is the DNA1.2 template with F1 and R1 primer pair.

    In lane 3 is the DNA2.2 template with F1 and R1 primer pair. In lane 4 is the DNA1.2 template with F2 and R1 primer pair. In lane 5 is the DNA2.2 template with the F2 and R1 primer pair. In lanes 6 and 7 there is nothing loaded as the wells were damaged. In lane 8 there is the DNA1.2 template with F3 and R1 primer pair. In lane 9 there is the DNA2.2 template with the F3 and R1 primer pair and in lane 10 there is the ssH2O negative control. A product is seen in lane 9 – this is the DNA2.2 template with the F3 and R1 primers!

    This means that we have a A. tumefaciens bacteriophytochrome product with a ribosome binding sight inserted.

    Retrieved from "http://2010.igem.org/Team:Macquarie_Australia/Notebook"