Contents 1 September 1.1 September 2, 2010 1.1.1 ADS 1.2 September 14, 2010 1.2.1 JF 1.2.2 AS 1.3 September 15, 2010 1.3.1 JV, ADS 1.4 September 16, 2010 1.4.1 JV 1.5 September 17, 2010 1.5.1 JV 1.6 September 20, 2010 1.6.1 ADS 1.7 September 21, 2010 1.7.1 ADS 1.8 September 21, 2010 1.8.1 ADS 1.9 September 23, 2010 1.9.1 JV 1.9.2 ADS 1.10 September 24, 2010 1.10.1 ADS 1.11 September 25, 2010 1.11.1 JV

September

September 2, 2010

ADS

Objective: Assemble lumazine-dT into pSB1C3 using NEB BioBrick Assembly Kit.
Method: Have the following parts: dT [28 ng/(µL)]; lumazine [78 ng/(µL)]; psB1C3 [14 ng/(µL)].

• Require 500 ng DNA each part in a 50(µL) rxn therefore 17.9(µL) dT and 6.4(µL) Lumazine. Need 250 ng pSB1C3 or 17.9(µL)

Restriction Reactions -

Ingredient	Volume(µL)
MilliQ H20 Water	36.1
NEBuffer 2 (10x)	5
Upstream Part (Lumazine)	26.4
EcoRI-HF	1
SpeI	1
100X BSA	0.5

Ingredient	Volume(µL)
MilliQ H20 Water	24.6
NEBuffer 2 (10x)	5
Downstream Part (dT)	17.9
XbaI	1
PstI	1
100X BSA	0.5

Ingredient	Volume(µL)
MilliQ H20 Water	3.35
NEBuffer 2 (10x)	2.5
Destination Plasmid (pSB1C3)	17.9
EcoRI-HF	.5
PstI	.5
100X BSA	0.25

• 2(µL) was removed prior to adding enzymes for analysis on gel.
  • Split digestion reactions in half: dT - 2 @ 24(µL); Lum - 2 @ 24(µL); psB1C3 - 2 @ 11.5(µL)
    • Ran 10 minute and 60 minute reactions at 37^oC. Followed by 20 minute heat shock at 80^oC.
      • 2(µL) was removed from the heat killed reactions for analysis on gel.

---

• Performed 4 combinations of ligation: 10 min Restriction + 10 min Ligation; 10 min Restriction + Overnight Ligation; 60 min Restriction + 10 min Ligation; 60 min Restriction + Overnight Ligation

Ingredient	1X(µL)	2X Master Mix(x2.5)(µL)
MilliQ H20 Water	11	77.5
T4 Ligase Buffer (10x)	2	5
Upstream Part	2	5
Downstream Part	2	5
T4 DNA Ligase	1	2.5
Plasmid Part	2	5

Incubated 10 minute and overnight ligations at room temperature ( 25^oC). Heat killed ligase at 80^oC for 20 min.

• 2(µL) of each reaction was taken for analysis on gel.

---

• Confirmed ligation with PCR analysis. Analyzed restriction, ligation and PCR on a 1.5% TAE agarose gel.

Component	1X(µL)	Master Mix(x5.5)(µL)
Milli-Q H2O	36.5	202.4
10x Pfu Buffer with MgSO4	5	27.5
dNTPs	2	11
Forward VF2 Primer	2	11
Reverse VR Primer	2	11
Template DNA	2
Pfu polymerase	0.2	1.1

Added 48(µL) to each reaction.

GEL PICTURE!!!

September 14, 2010

JF

Objective: Miniprep of RFP expression construct (J04450) via Qiaquick/Qiaprep spin column. Protocol followed as per kit instructions.

---

AS

Objective: Assemble xylE-dT using 3AB assembly and 3AB assembly.

Restriction Reactions -

3AB Upstream Part (xylE)

Ingredient	Volume(µL)
MilliQ H20 Water	30.6
NEBuffer 2 (10x)	5
Plasmid DNA	11.9
EcoRI-HF	1
SpeI	1
100X BSA	0.5

3AB Downstream Part (dT)

Ingredient	Volume(µL)
MilliQ H20 Water	24.6
NEBuffer 2 (10x)	5
Plasmid DNA	17.9
XbaI	1
PstI	1
100X BSA	0.5

3AB Plasmid (pSB1C3)

Ingredient	Volume(µL)
MilliQ H20 Water
NEBuffer 2 (10x)	5
Plasmid DNA	42.5
EcoRI-HF	1
PstI	1
100X BSA	0.5

• Ran 10 minute and 60 minute reactions at 37^oC. Followed by 20 minute heat shock at 80^oC.

Ligation Reaction -

Ingredient	1X(µL)
MilliQ H20 Water	11
T4 Ligase Buffer (10x)	2
Upstream Part	2
Downstream Part	2
T4 DNA Ligase	1
Plasmid Part	2

Incubated 10 minute and overnight ligations at room temperature ( 25^oC). Heat killed ligase at 80^oC for 20 min.

Transformation -

A) Thawed 200(µL) Library Efficiency DH5alpha Competent Cells on ice. B) Gently mixed cells and then aliquoted 100(µL) into chilled polypropylene tubes. C) Added 1(µL) of ligation mix to cells. Added 5(µL) of pUC19 DNA to 100(µL) cells to determine efficiency. D) Incubated cells on ice for 30 minutes. E) Heat shocked cells for 45 seconds in a 42^oC water bath. F) Placed on ice for 2 minutes. G) Added 0.9 mL of room temperature SOC medium. H) Shook at 225 rpm for 1 hour. I) Diluted control cells 1:100 with SOC medium. J) Spread 100(µL) of this dilution on LB-Amp agar plates K) Spread 50 and 250(µL) of experimental cells on LB-Cam agar plates. L) Incubated overnight at 37^oC

September 15, 2010

JV, ADS

Objective: Determine if dT ligated onto p-rbs-xylE using PCR analysis.

Component	1X(µL)	Master Mix(x4.5)(µL)
Milli-Q H2O	11.8	53.1
10x Pfu Buffer with MgSO4	2	9
dNTPs	1	4.5
Forward VF2 Primer	1	4.5
Reverse VR Primer	1	4.5
Template DNA	1
Pfu polymerase	0.2

Used iGEM program 7 in thermocycler.

---

Objective: Determine if minipreps from Sept 15, 2010 worked. Analyze assembly intermediates.
Method: Run 1% TAE agarose gels at 100 V for 90 minutes.

GEL PICTURES!!!

September 16, 2010

JV

Objective: Isolate RFP in pSB1C3 from DH5alpha cells.
Method: Used Qiagen minipep protocol and spin column.
Results: Gel of miniprepped RFP against previously prepared RFP showed a band of the right size.

GEL PICTURE!

September 17, 2010

JV

Objective: Isolate plasmid DNA from DH5alpha cells.
Method: Used Qiagen minipep protocol and spin column. Ran a 1% agarose gel to view DNA

GEL PICTURE!

September 20, 2010

ADS

Objective: Analyze PCR of mms6 (HB) and fluorescent proteins (AV).
Method: Analyzed on 2% TAE agarose gel.
Load order:

Lane	Sample	Volume Sample (µL)	Volume Loading Dye (µL)
1	HB1	10	2
2	HB2	10	2
3	HB3	10	2
4	HB4	10	2
5	HB5	10	2
6	100bp Ladder (Fermentas)	0.5	2(+10 H20)
7	RFP1	10	2
8	RFP2	10	2
9	RFP3	10	2

Results: ADD IMAGE

• mms6 was not amplified
• RFP was amplified
  • Expected size is ~800bp
  • Actual size is >1000bp
    • We believe that the suffix segment of the fusion primer annealed rather than the FP segment. This would cause the promoter (R0040) of J04450 to be amplified, adding ~200bp, giving a final size of >1000bp.

---

Objective: Confirm assembly (3 antibiotic) of K118021 and B0015 from Sept. XX, 2010 via PCR.
Method: Set up 50uL reaction mixture with 2uL of ligated DNA. Used VF2 and VR primers.
Used PFU setting on Thermocycler
Results: ADD IMAGE
Conclusion: Assembly did not work as intended.

September 21, 2010

ADS

Objective: Insert xylE (with N and C terminal fusion standards, obtained by PCR of K118021 by KG) into pSB1C3 plasmid for submission to registry.

Method:

• Restriction of xylE PCR product and pSB1C3 (containing J04450 biobrick) via BioBrick Method using EcoRI-HF and PstI (Enzymes from NEB)
• Ligation of xylE PCR product and pSB1C3 via BioBrick Method using T4 DNA ligase (Enzyme from NEB)
• Transform into Library Efficiency Compentent DH5α Cells (Invitrogen)

Results:

• Obtained too numerous to count (TNTC) colonies.
  • Obtained ~100 white colonies (indicating removal of RFP and insertion of new BioBrick)

Note:
Parent plasmid (from PCR) not digested, possibly K118021 moved into pSB1C3 backbone.

Follow-up:
Screen white colonies by addition of catechol to solution containing white cells.

September 21, 2010

ADS

Objective: Analyze PCR of K118021-B0015 and subsequent PCR (ADS) and PCR of <partinfo>K118021</partinfo> to add either N or C terminal fusion standard (KG).
Method: Analyze on 2% TAE agarose gel.
Load Order:

Lane	Sample	Volume Sample (µL)	Volume Loading Dye (µL)
1	xylE F-S 1	5	1
2	xylE F-S 2	5	1
3	xylE F-S 3	5	1
4	xylE F-S 4	5	1
5	xylE F-S 5	5	1
6	xylE F-S 6	5	1
7	100bp Ladder (NEB)	0.5	1(+5 H20)
8	xylE S-F 1	5	1
9	xylE S-F 2	5	1
10	xylE S-F 3	5	1
11	xylE S-F 4	5	1
12	xylE S-F 5	5	1
13	xylE S-F 6	5	1
14	Empty
15	PCR of K118021-B0015 (ADS)	1	1
16	Empty
17	Empty

Results: ADD IMAGE

• Both KG PCR (Standard-Fusion and Fusion-Standard) amplified
• ADS PCR Amplified, but no insert present.

September 23, 2010

JV

Objective: Characterized catechol degradation by xylE enzyme

Method: Measured absorbance of catechol (275nm) and 2-hydroxymuconate semialdehyde (380nm).

• Protocol:
• 1) Grow cells in M9 minimal medium
• 2) Take 1/10 dilution of cells
• 3) Introduce 1µL of 0.05M catechol solution into the cell dilution. (Final concentration of 50&microM;).
• 4) Quench the reaction with 5A% w/v trichloroacetate at certain time points. (0,15sec, 30sec, 45sec, 60sec, 2min, 3min, 4min, 5min, 10min).
• 5) Spin down cells.
• 6) Measure absorbance of supernatant.
  

Results: Cuvette used interfered with Spectra.

ADS

NOTE: In all transformations, heat shock step was missed. HOWEVER, all transformations showed significant number of colony forming units.
Objective: Move xylE (two biobrick; one with Fusion prefix, one with fusion suffix) into pSB1C3.
Method:

• Restriction of xylE PCR product and pSB1C3 (containing J04450 biobrick) via BioBrick Method using EcoRI-HF and PstI (Enzymes from NEB)
• Ligation of xylE PCR product and pSB1C3 via BioBrick Method using T4 DNA ligase (Enzyme from NEB)
  • Incubated 30 min at RT
• Transform into Subcloning Efficiency Compentent DH5α Cells (Invitrogen)

Results: TBD
Follow-up: TBD

---

Objective: Create glycerol stocks of <partinfo>J04450</partinfo> in pSB1A3 and pSB1T3 for use in RFP-BioBrick Assembly.
Method: Transform into Subcloning Efficiency Competent DH5α Cells (Invitrogen)
Obtained all plasmid DNA from 2010 Kit Plate 1

• J04450 in pSB1A3 - Well 1C
• J04450 in pSB1T3 - Well 7A

Results: Obtained TNTC colonies
Follow-up:

• Grow overnight cultures
• Generate Glycerol Stocks
• Generate Plasmid DNA via Maxiprep

---

Objective: Create glycerol stocks of received synthesized (Mr. Gene) signal peptides.
Method: Transform into Subcloning Efficiency Competent DH5α Cells (Invitrogen) plasmid DNA containing the following BioBricks:

• 1) <partinfo>K331007</partinfo> - β-lactamase Bla Signal Sequence
• 2) <partinfo>K331008</partinfo> - Outer Membrane Protein ompA
• 3) <partinfo>K331009</partinfo> - Heat Stable Toxin I
• 4) <partinfo>K331012</partinfo> - Penicillin Binding Protein DacA
• All inserts in pMA-T vector (Standard Mr. Gene vector)

Results: Obtained TNTC Cells
Follow-up:

• 1) Grow overnight cultures
• 2) Purify pDNA
• 3) Move into pSB1C3 plasmid
• 4) Verify sequence
• 5) Submit to registry for sequencing

September 24, 2010

ADS

Objective: Generate plasmid DNA of <partinfo>E1010</partinfo> for downstream PCR
Method: Transform plasmid DNA into Subcloning Efficiency Competent DH5α Cells (Invitrogen)
DNA obtained from 2010 Kit Plate 1 Well 18F (E1010 in pSB2K3)
Results: Obtained TBD colonies
Follow-up:

• Grow overnight cultures (Generate glycerol stocks)
• Purify plasmid DNA (Generate pDNA stocks)
• PCR to add terminal fusion standards

---

Objective: Create glycerol stocks of J04450 in pSB1K3 for use in RFP-BioBrick Assembly.
Method: Transform into Subcloning Efficiency Competent DH5α Cells (Invitrogen)
Obtained plasmid DNA from 2010 Kit Plate 1 well 5A (J04450 in pSB1K3)
Results: Obtained TNTC colonies
Follow-up:

• Grow overnight cultures
• Generate Glycerol Stocks
• Generate Plasmid DNA via Maxiprep

September 25, 2010

JV

Objective: Extract Plasmid DNA from DH5α cells.

Method:Qiagen spin column protocol.

• <partinfo>K331007</partinfo> (in pMA-T vector)
• <partinfo>K331008</partinfo> (in pMA-T vector)
• <partinfo>K331009</partinfo> (in pMA-T vector)
• <partinfo>K331012</partinfo> (in pMA-T vector)
  

Cells containing plasmids were put into glycerol stocks and put into HJ's -80^oC.

Retrieved from "http://2010.igem.org/Team:Lethbridge/Notebook/Lab_Work/September"