Team:Freiburg Bioware/NoteBook/Labjournal/September2

From 2010.igem.org

Revision as of 13:22, 20 September 2010 by Jessica (Talk | contribs)

Contents

September

124. labday 19.09.2010

Continuation with Colony-PCR of pSB1C3_CD and ViralBrick motif Z34C

Investigator: Bea

Comment: Since the colony PCR of the last try did not work exactly the way we expected it, another colony PCR approach with new primers was conducted.


Loading plan:
upper lanes

M   CD1  CD2  CD3  CD4  CD5  CD6  CD7  CD8  CD9  CD10   +ctrl(CFP) +ctrl(BAP) -ctrl(pAAV_MCS)   11Q1  12Q1  13Q1 13Q2  M

lower lanes

M   11T41  11T42  11T43  11T44    12T41  12T42  12T43  12T44    13T41  13T42  13T43  13T44    14T41  14T42 14T43  14T44  M


Expected sizes of the PCR products are:

  • Cytosine deaminase (CD) = 1300bp
  • Z34C loops insertion motif = 220bp
  • Positive control 1 = CFP = 750bp
  • Positive control 2 = BAP_587 = 170bp


Results:
The Colony PCR of the Cytosine Deaminase (CD) did not work out. The detectable bands at around 700 bp correspond to CFP. Therefore, BioBrick production of the CD must be repeated. The following three bands represent the controls. Three different controls were used. The first corresponds to pSB1C3_CFP, the second to BAP_587 and third control is the negative control. Unfortunately now bands can be detected in the postive controls. A faint band can be seen in the negative control which is the only lane in which no band should be detectable.
The following bands after the three controls correspond to the approaches of the Z34C Viralbrick production. Some bands in the lower and the upper lanes show positive results. The corresponding inoculated overnight culture were centrifuged and prepared in order to perform a Mini-Prep tomorrow.

Freiburg10 ColonyPCR Results 19.09.2010.jpg



Comment: hmm, seems that the CD-assambly didn't work at all.. Should i try it again or are we gonna skip it for good due to other priorities?(kira)
No, we cannot skip it. Can we change something else?? Any ideas what we can alter in the protocol? Because problem is that we are still waiting for the tk... so we should aswell focus on the other prodrug activating enzmye!! (Bea)


Testtransduction of the final modified capsid coding constructs

Investigator: Adrian

Aim of the experiment:
During the project 22 silent nucleotide exchange mutations were introduced into the capsid coding construct to make it compatible with the RFC standards and to have single cutting restriction enzymes flanking the 453 and the 587 loop sequence. Two point mutations had to be dismissed, because either a first test transduction showed that the construct was not working anymore or the insertion of the synthesized gene posed serious problems, because the restriction enzyme did not work.
Finally, we have a construct that is shown to produce infectious particles comparable to the current AAV systems and carries 20 point mutations. Now we can announce that the Adeno-associated Virus is compatible to the RFC standard and the idea to replace the loop sequences via ViralBricks works!

Impression from the moment:

The construct with the insertion of the Rep and the Cap synthesis worked! Reintroduction of the KpnI restriction site recovered the functionality of the viral genome!

Miniprep of serveral constructs

Investigator: Stefan

Glycerol stocks were prepared:

  • B430 = pCerulean_ZEGFR:1907_Longlinker_VP2/3
  • B431 = pCerulean_CFP_Middlelinker_VP2/3_insCap
  • B432 = pCerulean_ZEGFR:1907_Shortlinker_VP2/3_insCap



Mini-Prep was performed according to the standard protocol

  • P527 = pCerulean_ZEGFR:1907_Longlinker_VP2/3 c = 230,61 ng/µl
  • P528 = pCerulean_CFP_Middlelinker_VP2/3_insCap c = 290,81 ng/µl
  • P529 = pCerulean_ZEGFR:1907_Shortlinker_VP2/3_insCap c = 269,39 ng/µl
  • Several other constructs were preped, but need to be confirmed before being added to plasmid/glycerol stock.


125. labday 20.09.2010

Cloning of pCerulean_Affibody_VP2/3 and pSB1C3_Affibody_middlelinker_GFP_his

Investigator: Jessica

Comment:Affibody_VP2/3 will be cloned in pCerulean and Affibody_middlelinker will be cloned together with GFP_His in pSB1C3


  • P407= pCerulean_CFP_middlelinker c=482,76 ng/µl
  • P516= pSB1C3_ZEGFR:1907_VP2/3 clone 1 c= 191,6 ng/µl
  • P290= pSB1C3_Affibody_Middlelinker clone 1 c= 227,4 ng/µl
  • P518= pSB1C3_GFP_RFC25_upper band clone 1 c= 138,3 ng/µl
  • P520= pSB1C3_GFP_RFC25_lower band clone 1 c= 141,6 ng/µl


Digestion:

components P407 P516 P290 P518 P520
DNA 3,5 10 7 10 10
BSA (10x) 2 2 2 2 2
Buffer 4 (10x)2 2 2 2 2
EcoRI 0,8 0,8---
AgeI 0,80,80,8--
NgoMIV ---0,80,8
SpeI --0,80,80,8
H2O10,9 4,4 7,4 4,4 4,4
Total volume 20 20 20 20 20


1,0 g Agarose,100 ml TAE (1%), 6 µl GELRED , at 120 Volt



Freiburg10 pCerulean affi vp23.jpg




Gelextraction:

The gelextraction was performed according to the standard protocol. DNA concentration of the extracts:

  • P407= c= ng/µl
  • P516= c= ng/µl
  • P290= c= ng/µl
  • P518= c= ng/µl
  • P520= c= ng/µl


T4 Ligation:

The Ligation was performed as following:

  • Vector Volume: µl
  • Insert Volume: µl


  • 1µl T4-Ligase buffer (10x)
  • 8µl (Vector + Insert) mix
  • 1µl T4-Ligase


Incubating for 40 minutes.


Transformation:

Trafo was performed according to the standard protocol (XL1blue). The cells were plated on a agar plate with Kana/Cm

Cloning VP2/3 approaches into pSB1C3_VCK vector

Investigator: Bea

Comment:Since the constructs VP2/3 and VP2/3_ins_cap were cloned in the plasmid pSB1C3 they need to recloned into the vector pSB1C3_VCK which have two deleted restrictions sites (PvuII ans SspI) . These restriction sites have to be single cutting enzymes in this case because we want to subclone the HSPG-knockout "motif" into the cap gene in order to obtain constructs for the N-terminal targeting approach. The recombinant virus particles basically then do not show the natural tropism for its primary receptor.


Digestion of the constructs:

  • P440 = pSB1C3_VP2/3 c=290 ng/µL
  • P440 = pSB1C3_VP2/3_ins_cap c=314ng/µL
  • P309 = pSB1C3_VCK_BLA c=408ng/µL


Components vP440 /µL vP444/µL vP309 /µL
DNA 5,5 5,52,5
BSA (10x) 4 4 3
Buffer no. 4 (10x) 4 4 3
EcoRI 1 1 1
AgeI 1 1 1
MISC SacI: 1 MscI: 1 -
H2O 23,5 23,5 19,5
Total volume 40 40 30


The expected fragments of the digested constructs were: The underlined fragments represent the fragments which correspond to the desired construct which can be used for ligation.

  • P440: 1950, 1158, 908bp
  • P444: 1950, 1347, 715bp
  • P309: 2067, 894bp


Loading plan:

M    P440    P444    P309


Results:

Freiburg10 pSB1C3 VCK VP2 3 15 09 2010.jpg


After gel extraction has been performed, the ligation was carried out.

Ligation:

  • v=P444 =5,5µL
  • v=P309 =2,5µL

The ligation mix was transformed into XL1-Blue cells and plated on agar plates containing chloramphenicol.

Next steps:
Picking clones and perform Mini-Prep. After the Mini-Preps have been performed these constructs can be used for inserting the HSPG knockout motif.