Team:IvyTech-South Bend/Notebook

From 2010.igem.org

Revision as of 18:37, 30 September 2010 by Rchamberlin (Talk | contribs)

Discussion

Contents

Notebook

June
MTWTFSS
  [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/1_June_2010&action=edit 1] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/2_June_2010&action=edit 2] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/3_June_2010&action=edit 3] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/4_June_2010&action=edit 4] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/5_June_2010&action=edit 5] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/6_June_2010&action=edit 6]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/7_June_2010&action=edit 7] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/8_June_2010&action=edit 8] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/9_June_2010&action=edit 9] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/10_June_2010&action=edit 10] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/11_June_2010&action=edit 11] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/12_June_2010&action=edit 12] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/13_June_2010&action=edit 13]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/14_June_2010&action=edit 14] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/15_June_2010&action=edit 15] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/16_June_2010&action=edit 16] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/17_June_2010&action=edit 17] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/18_June_2010&action=edit 18] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/19_June_2010&action=edit 19] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/20_June_2010&action=edit 20]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/21_June_2010&action=edit 21] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/22_June_2010&action=edit 22] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/23_June_2010&action=edit 23] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/24_June_2010&action=edit 24] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/25_June_2010&action=edit 25] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/26_June_2010&action=edit 26] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/27_June_2010&action=edit 27]
[http://2010.igem.org/Talk:Team:IvyTech-South_Bend/28_June_2010 28] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/29_June_2010 29] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/30_June_2010 30]
July
MTWTFSS
      [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/1_July_2010 1] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/2_July_2010&action=edit 2] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/3_July_2010&action=edit 3] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/4_July_2010&action=edit 4]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/5_July_2010&action=edit 5] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/6_July_2010&action=edit 6] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/7_July_2010&action=edit 7] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/8_July_2010&action=edit 8] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/9_July_2010&action=edit 9] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/10_July_2010&action=edit 10] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/11_July_2010&action=edit 11]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/12_July_2010&action=edit 12] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/13_July_2010&action=edit 13] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/14_July_2010&action=edit 14] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/15_July_2010&action=edit 15] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/16_July_2010&action=edit 16] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/17_July_2010&action=edit 17] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/18_July_2010&action=edit 18]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/19_July_2010&action=edit 19] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/20_July_2010&action=edit 20] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/21_July_2010&action=edit 21] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/22_July_2010&action=edit 22] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/23_July_2010&action=edit 23] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/24_July_2010&action=edit 24] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/25_July_2010&action=edit 25]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/26_July_2010&action=edit 26] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/27_July_2010&action=edit 27] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/28_July_2010 28] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/29_July_2010&action=edit 29] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/30_July_2010&action=edit 30] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/31_July_2010&action=edit 31]
August
MTWTFSS
            [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/1_August_2010&action=edit 1]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/2_August_2010&action=edit 2] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/3_August_2010&action=edit 3] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/4_August_2010&action=edit 4] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/5_August_2010&action=edit 5] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/6_August_2010&action=edit 6] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/7_August_2010&action=edit 7] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/8_August_2010&action=edit 8]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/9_August_2010&action=edit 9] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/10_August_2010&action=edit 10] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/11_August_2010&action=edit 11] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/12_August_2010&action=edit 12] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/13_August_2010&action=edit 13] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/14_August_2010&action=edit 14] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/15_August_2010&action=edit 15]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/16_August_2010&action=edit 16] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/17_August_2010&action=edit 17] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/18_August_2010&action=edit 18] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/19_August_2010&action=edit 19] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/20_August_2010&action=edit 20] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/21_August_2010&action=edit 21] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/22_August_2010&action=edit 22]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/23_August_2010&action=edit 23] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/24_August_2010 24] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/25_August_2010&action=edit 25] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/26_August_2010&action=edit 26] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/27_August_2010 27] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/28_August_2010&action=edit 28] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/29_August_2010&action=edit 29]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/30_August_2010&action=edit 30] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/31_August_2010 31]


September
MTWTFSS
    [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/1_September_2010 1] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/2_September_2010 2] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/3_September_2010 3] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/4_September_2010&action=edit 4] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/5_September_2010&action=edit 5]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/6_September_2010&action=edit 6] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/7_September_2010&action=edit 7] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/8_September_2010&action=edit 8] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/9_September_2010 9] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/10_September_2010 10] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/11_September_2010&action=edit 11] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/12_September_2010&action=edit 12]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/13_September_2010&action=edit 13] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/14_September_2010 14] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/15_September_2010 15] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/16_September_2010 16] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/17_September_2010 17] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/18_September_2010&action=edit 18] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/19_September_2010&action=edit 19]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/20_September_2010&action=edit 20] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/21_September_2010 21] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/22_September_2010 22] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/23_September_2010 23] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/24_September_2010 24] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/25_September_2010&action=edit 25] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/26_September_2010&action=edit 26]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/27_September_2010&action=edit 27] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/28_September_2010 28] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/29_September_2010&action=edit 29] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/30_September_2010 30]
October
MTWTFSS
        [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/1_October_2010 1] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/2_October_2010&action=edit 2] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/3_October_2010&action=edit 3]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/4_October_2010&action=edit 4] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/5_October_2010 5] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/6_October_2010 6] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/7_October_2010 7] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/8_October_2010 8] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/9_October_2010&action=edit 9] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/10_October_2010&action=edit 10]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/11_October_2010&action=edit 11] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/12_October_2010 12] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/13_October_2010 13] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/14_October_2010 14] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/15_October_2010 15] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/16_October_2010&action=edit 16] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/17_October_2010&action=edit 17]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/18_October_2010&action=edit 18] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/19_October_2010 19] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/20_October_2010 20] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/21_October_2010 21] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/22_October_2010 22] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/23_October_2010 23] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/24_October_2010 24]
[http://2010.igem.org/Talk:Team:IvyTech-South_Bend/25_October_2010 25] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/26_October_2010 26] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/27_October_2010&action=edit 27] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/28_October_2010&action=edit 28] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/29_October_2010&action=edit 29] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/30_October_2010&action=edit 30] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/31_October_2010&action=edit 31]
November
MTWTFSS
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/1_November_2010&action=edit 1] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/2_November_2010&action=edit 2] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/3_November_2010&action=edit 3] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/4_November_2010&action=edit 4] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/5_November_2010&action=edit 5] [http://2010.igem.org/Talk:Team:IvyTech-South_Bend/6_November_2010 6] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/7_November_2010&action=edit 7]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/8_November_2010&action=edit 8] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/9_November_2010&action=edit 9] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/10_November_2010&action=edit 10] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/11_November_2010&action=edit 11] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/12_November_2010&action=edit 12] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/13_November_2010&action=edit 13] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/14_November_2010&action=edit 14]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/15_November_2010&action=edit 15] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/16_November_2010&action=edit 16] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/17_November_2010&action=edit 17] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/18_November_2010&action=edit 18] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/19_November_2010&action=edit 19] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/20_November_2010&action=edit 20] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/21_November_2010&action=edit 21]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/22_November_2010&action=edit 22] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/23_November_2010&action=edit 23] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/24_November_2010&action=edit 24] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/25_November_2010&action=edit 25] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/26_November_2010&action=edit 26] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/27_November_2010&action=edit 27] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/28_November_2010&action=edit 28]
[http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/29_November_2010&action=edit 29] [http://2010.igem.org/wiki/index.php?title=Talk:Team:IvyTech-South_Bend/30_November_2010&action=edit 30]


8/24/10

Today we will be pouring new plates for streaking new transformed cells.

8/27/10

We will be running a gel to determine if our DNA sample was successfully electroplated.

8/27/10

Today we will be electroplating part KBBa_3131010

8/31/10

Results of transformation - the plates had growth but (no) distinct colony pattern. The amp that was added to the Agar seemed to have been destroyed before plates were poured. The Agar could have been still too hot and killed the Amp. So today, we will make fresh LB/Amp Agar and pour new plates. 1) Grabbed the Powder LB Broth Lennox we weighed 5.002 g LB and added this to a Capped 500 mL Elenmiyer flask then added 250 mL 18 ohm DI water then shook to mix then placed into autoclave on liquid setting for 15 min at 121 C 2) We will let the LB cool then add

5.002 Difco tm LB Broth Lennox Ref# 240230 500 g container Lot# 9082989 Ex. Date 2014/02/28 Date received 6/8/09 G.M. opened 4/9/10

Autoclave – Agar, molecular Biology grade CAT# A7777 Lot# A777715E0901 Re Assay Date 5/15/14

To test our

Amp we will make another 250 mL LB Agur and add Amp to it in different doses using a sterile tube. We will be making 4 plates at different concentrations of Amp So 15 mL with no Amp 15 mL with 15 mL Amp 15 mL with 30 mL Amp and 15 mL with 60 mL Amp then pour into plates. We forgot to add agur to the LB Broth so I added 3.752 g to 250 mL LB Broth into 2 500 mL capped Elenmiyer flasks 250 mL in each 3.75 g Agur in each now heating on 2 hot plates. Then we will add Amp to plates described above. removed


== 8/31/10 ==


After agar is dissolved, and allowed to cool, I will add Amp in different doses to specific plates. 1) I decided to use microwave to dissolve the Agar into the LB/Broth using the 4oz beverage setting I ran intermittently not allowing to boil over. 2) After dissolved the autoclaved 250 mL flask and put the other into a 40 C hot water bath to cool rapidly this one I will use for my 4 plates. 3) After cooling in water bath I removed lid on Elenmyer flask and checked temp it was 41 C then set up in Biofume Hood added 15 mL Agar with Amp and poured four plates. 1 – No Amp 2 – 15 mL Amp 3 – 30 mL Alp 4 – 60 mL Amp 1 & 2 the lids were opened in the environment for a sec. 4) I placed our 4 plates into a plate bag and put into fridge in the back room. 5) We will plate next time. 8/31/10 J.H.


== 9/1/10 

==

Today the team will be making up the same plates as I made yesterday. Professor T. wants new Amp stock made to document how much is used into the stock. Fisher Bio Reagents Ampicillin Sodium Salt Biotech grade. Date Recd 3/18/10 Bp 176-25 1) I have measured out .1287 g Ampicillin stock powder to make a solution of 100 g/mL stock 2) .1287 * .845 = .1087 mg of Active ingedent and dissolving in 1.09 mL H20 with my BR-1000 micropipettor I used the 1000 mark 3) and turned to 009 for the .09 mL added to powder spl. and dissolved 4) using the same pipettor I transferred inside biofume hood 250 mL into 4 sterile ependorph tubes labeled and placed into -80 freezer box. 5) I have poured 4 plates to replace plates from yesterday due to botched Amp 6) Plate 1 – no Amp and 15 mL LB/Agar Plate 2 – 15 mL Amp with 15 mL LB Agar Plate 3 – 30 mL Amp 15 mL Agar/LB Plate 4 – 60 mL Amp 15 mL LB Agar all plates and amp were poured and mixed sterile in Bio-hood I have labeled 1-4 on plates. The Agar was microwaved on beverage setting 4 oz. level four 4 times not allowing to boil over then placed into 40 C Hot water bath to cool amp is added directly into 50 cc sterile tube then added 15 mL Agar to that tube. Allowed to cool in hood. Now we will streak electro. comp cells on one side and transformed DNA/cells on the other. Electro comp cells I woke up cells into 3 mL of LB Broth I added 2 mL LB/Broth then added electro comp cells to that flicked to mix then added 1 mL more then let sit. Transformation was made by Prof. T. Streaking 1) Set up Station Cleaning Table with disinfectant along with pipettors and all tools striker, Bunsen Burner 2) Wearing a face covering mask I streaked all 4 plates and placed into incubator overnight. 9/1/10 J.H.

== 9/2/10 ==


Results from streaking – Transformed DNA grew on all four plates and progressively grew less when the Amp Con. was raised. So selection was possibly made. We will run a Electro gel to look for possibly the bands need. Electro comp cells won’t grow in the presence of Amp without transformed DNA. Looking at Results when the Con. of Amp is too high you get limited GFP expression and I believe that electro are contaminated by me after/when I streaked my plates. Today I will suspend the Transformed DNA into 10 mL Broth with 10 mL Amp and shake. 1) Set up a Clean environment by cleaning table, tools, etc. with disinfectants. then prof. T. told me to do it in Bio hood So I did :) 2)Moved all into bio-fume hood 3) Placed 10 mL LB Broth into Sterile 15 mL Centrifuge tube then from streaked plate #3 I pulled a Colony from this. A Colony is placed for resuspendion in this. Then I added using a steril 5 mL pipette I added 1 mL LB/Broth into 6 sterile 1 mL Centrifuge tubes. then added a Colony to each. then using my .5 – 10 mL micropippettor I put 1.0 mL of Amp in each 1 mL Centrifuge tube. 4) I added a large Colony into 10 mL Centrifuge tube w/LB Broth add 10 mL Amp using my 2-20 mL micropipettor. 5) I have placed 10 mL tube into incubator until tomorrow. Extraction of DNA of KBBa _K131010 from Electrotransformation Irene has performed all operations of this protocol and will finish by placing spl. in the box freezer in back room -20 C

== 9/2/10 ==


Protocol For Making LB-Broth/Agar Today I made 2 L LB/Agar I placed 1) 10 g LB-Lennox into 4 – 1000 mL capped Elenmyier Flasks 2) then placed/weighed 7.1 g Molecular Biology Agar into the same (4) Elenmyier Flasks 3) added 50 mL 18 ohm water into each of the 4 Elenmyier Flasks 4) then microwave on Beverage 8 oz. setting 6 times to melt /dissolve Agar into solution. After dissolved I placed into Autoclave on Liquids Setting and let run overnight. note Irene made 250 mL and placed into Autoclave. I removed after done labeled 9/2/10 J.H. LB/Agar. and put in fridge in back.


9/2/10

I wasn’t able to fit all 4 – 1000 mL capped Elenmyier Flasks into Autoclave at one time so I placed the 2 in autoclave. and 2 in a 40 C Hot water bath. The 2 in Autoclave we placed inside pan and set to Liquid setting and started which is in 121 C at 15 min. will autoclave the other 2 Friday 9/3/10 9/2/10 J.H.


9/3/10

Today I’m finishing making the LB/Agar from yesterday. 1) I took the 2 Elenmyier Flasks from hot water bath and melting in microwave. 2) Microwaving on beverage setting on 8 oz. setting until liquid. 3) then placed into autoclave on liquid setting/ 121 C 15 min 4) the placed into fridge until needed. Now I’m make up 200 mL of agarous Gel 1) I grabbed a 250 mL grad cylinder and a 100 grad cylinder, 2) 250 black capped bottles, 50X TAE Buffer Stock, BR – 1000 micropippettor, Tips and Agar Biograde, weighed out 1.0003 g & 1.0013 grams of agar placed one into each bottle next added 2 mL of 50X TAE stock into each bottle then filled with 98 mL 18 ohm H2O 3) next placed both bottles on a hot plate set at 400 degrees to melt 4) After bringing to a low boil I dropped temp to 250 degrees.


9/9/10

Due to conflict we will be changing from E Coli to yeast. Today we will electroporate the 2 parts we discovered yesterday parts #’s BBa_F2620 a pops receiver and # BBa_T9002 a receiver device Both parts are on plate 2 of the Igems registry F2620 is well 6 – E, and T9002 is in well 9 – A Both parts. • We will need to follow protocol from openwetware.org Refer to IGems Main Lab notebook for std. protocol. • The DNA will be extracted inside Bio-fume hood • Before extraction I cleaned entire Fume hood with ethanol alcohol to sterilize * • Then placed sterile 1 mL centrifuge tube container into biohood • Set up electroporation machine set to EC - 1 setting and waiting • I took and added 10 mL 180 ohm H2O to well A – 9 • then pipetted up and down using my BR – 10 1 0 0 then pipetted 2 mL Ligated DNA into 100 mL electrocomp cells • added 100 mL to chilled on ice bath cuvette then electroporated hitting then button twice at 1.8 kv and into cuvette after electroporation 900 mL 50B media placed into cuvette then drew all 1 mL out and placed into 1.5 mL centrifuge tube. • 4.6 ms at 2:50 pm they were placed into a 1.5 mL centrifuge tube to stand for 1 hr. • After standing for 1 hr we will plate 100 mL transformed electro cells on LB/Agar with 100 mg/mL Amp to grow overnight at 30 degrees C

9/10/10

Lux Casette Right Promoter BBa_I1051 (2008) plate C002 well 3 – C, 2007, Plate 1 18P, 2006 DNA – 1 18 – P PLux/C1 Hybrid promoter BBa_K091107 – well 8 – P plate #2 yeast promoter BBa_K105024 Yeast promoter BBa_J63005 well 4 – A Plate 2 Yesterday (9/9), I streaked 2 plates containing LB/Agar. I streaked the transformed electro comp cells using the turntable method. Today no growth was found. Possible reasons for error I might have not cooled glass hocking sticks long enough. 

- Today –
We need 1 PLux, 2 Yeast Transcription Factor 3 LuxR 4 Yeast Promoter 5 Yeast promoter that responds to yeast trans factor, we must look at Igems registry

Parts list for Igem 1 PLux BBa_K091107 10,12,21,23,25 Plate 2 Well 8 – P 2 P Yeast BBa_J63005 10,12,21,23 Plate 2 Well 4 – A 3 LuxR BBa_T9002 10,12,21,23,25 Plate 2 Well 9 – A 4 Gal 4 BBa_K105007 10,12,23,25 Plate 3 Well 9 – I 5 Yeast Prom. BBa_K207001 10,12,23,25 Harvard

We are going to electroporate parts 1 – 3, 4 today using the same protocol from yesterday. 1) I cleaned the hood using alcohol and all pippettors boxes and tools. 2) Set up Ice bath and placed all tools in Hood 3) the first part I will be electroporating is part # BBa_K091107 Plate 2 well 8 – P 4) I added 10 mL 18ohm H2O to well 8 – P and pipetted up and down 4 times then removed 2 mL from well and placed into 100 mL comp cells, Gal 4 transcription factor BBa_K105007 Plate 3 well 9 – I 5) First electro was 1.8 kv at 5.2 ms. 1A) we electroporate part # BBa_K105007 from plate 3 1.8 kv 4.2 ms well 9 – I following the same protocol from page 15. 2) we electroporated part # BBa_T9002 from plate 2 well 9 – A we added 2 mL of 18 ohm H2O to resuspend the DNA spl. electroporate 1.8 kv 4.2 ms 3) Now that they have sat for 1 hr. we will streak 2 plates for each part so “6” in all 4) with remainder I will add half each tube to 10 mL LB – Lennox 3 with Amp made fresh and 3 w/out Amp and put on shaker. -Making Amp-

250 mL treats 250 mL 10 mL per 10 mL .845 g / 30 mL

I added .6909 g to 5 mL 18 ohm H2O the dissolved I added 10 mL to “3” 15 mL Sterile Centrifuge tubes then added 10 mL LB – Lennox to “6” tubes then added 400 mL electroporated cells to them part1, part 3, part 4


9/14/10

Today we found growth from our Electroporated E – Coli parts now we took 10 mL made by GM 4/10/10 and poured 10 mL into 3 sterile tubes then added 10 mL Amp to each tube, then placed a large Colony from each part into these tubes then placed on shaker until tomorrow. - We have discovered that yeast will take a bunch of trial and error so we will try and place our IGem into Grown t/pos Bacteria-

- We will be using-

-For now – I took my 10 mL Centrifuge tubes that had electroporated cells containing parts made Friday and placed into 500 mL 40 percent glycerol and 500 mL of each part and made “2” of each to be frozen as backups.

== 9/15/10 ==


- Today we will be extracting DNA from out electroporated cells/T9002 - Wash our grown pos. bacteria with 10 percent glycerol to create Electro comp. cells - Then Electroporate T9002 into Elect. comp grown pos/t bacteria

First we will be extracting DNA from BBa_T9002 Electroporated Cells using this protocol.


9/15/10

I poured 10 mL LB – Lennox into 7 different 15 mL sterile Centrifuge tubes “2” for our electroporated parts T9002, K091107 with 10 mL Amp added 5 for our grown t/pos bacteria w/out Amp labeled then added one loop full of bacteria into each then placed on shaker overnight. Irene streaked our bacteria to set up for grown staining then placed into 37 degree incubation overnight.


9/16/10

Today we will wash our electrocomp grown t/pos bacteria with 1.2 mL Glycerol then electroporate Following protocol from page 15 First prof. T sterilized the glycerol passing it through the .2 micron filter into 50 mL sterile centrifuge tube 1 – then we added 1 mL 10 percent Glycerol to suspended cells 2 – then centrifuged at 1000 rpm for 10 min - then removed supernate with BR 1000 micropipettor - then add 1 mL 10 percent Glycerol then repeat steps 1 & 2 “4” times then remove sup. and freeze cells at -80 degrees C freezer.

- Today we also set up a new IGem work are in back lab look at pic


9/17/10

Today we will be doing a DNA Extraction from/of part T9002 for electroporation this will determine if we have a stable host for our beast this will also Work!

Following protocols from pgs 15 &19 -instead of Electroporating our part we will use PG10 to determine if these lines are good hosts

First we will be pouring a full pack of LB/Agar/Amp plates using the LB/Agar I made on 9/2/10 then adding amp made by DG on 9/1/10 we will also add 5 mL Arabonse to the Agar before pouring plates have been poured now letting stand for an hour to harden.

-Now I will be making 1L of LB/Broth for Culturing. Lot 9082989 ex. 2014-02-28 BD Difco LB/Broth – Lennox 20 g per 1L so I will put 10 g into 2 elenmyier flask/capped one weighed 10.0023 g and the other weighed 10.0011 g then I added 500 mL into each flask then shook to mix then dissolved in microwaved for 8 oz setting once then placed into Autoclave for 15 min @ 121 degrees C until done.

Now we are going electroporate our grown t/pos Electro Comp Cells from yesterday with PG10 using protocol from pg 15 changing # 5 to 5 mL of PG10 We will be using a different protocol for electroporation of grown t/pos bacteria from Bio-Rad’s website prof. T will print and I’ll place here.

The mycobacterium will be done by electroporation protocol on pg 15.

1) First I placed a Cuvette into Ice bath and thawed electro comp cells 2) I set up 5 1.5 mL Sterile Centrifuge tubes with 900 mL SOB media 3) we will electroporate Irene’s electrocomp cells w/PG10 and mine will contain the parts after electroporation.

Code AT – A.tumefacions SL – S.lactis BM – B.magetanium MP – Mycobacteria BT – B.thurigensis

split cells using 40 mL Hy part my cells then electroporate

I electroporated all except mycobacteria now letting cells sit for at least Just added 1 mL to electroporated Cultures they had sat for 20 min before adding.

- Now I will electroporate mycobacteria using E – Coli protocol from pg 15 using 40 mL cells 4 mL pg10 Electroporation hit twice Read out 1.8 kv @ 5.2 ms then 1.79 kv @ 5.1 ms. then placed into 900 mL SOB media then incubate @ 30 degrees C for 3 hrs.

Results From this we found that agrobacteria will be the best host for our beast/IGem we will do further testing towards our ultimate goal.


9/21/10

Today we will electroporate Agrobacterium with part T9002 using protocol from pg 22 – 23

1) I will put frozen electro comp cells from -80 degrees C freezer 2) We will do two “2” electroporations with (AT) one with 5 mL T9002 Gene, and one with 20 mL 3) Icing Cuvette (.1) and now prepared to electroporate 4) Reading for 20 mL was 2.2 kv @ 0.70 ms 5) then removed with 1 mL SOB media 6) Placed into 1.5 mL Sterile Centrifuge tube at room temp for 3 hrs prof T. will streak.


9/22/10

Today we have growth from electroporation done yesterday we are going to test by hitting with (AHL) the 20 mL grew not 5 mL sample 1) Scrap bacteria from transformed plate 2) Set up (3) Cuvettes 1 with 200 mL of bacteria + 800 mL LB – Lennox broth 2 with 200 mL of bacteria + 800 mL of A.tumafaciens superant 3 with 200 mL of bacteria + 800 mL of E – Coli Superant 

                                    4 with 200 mL LB broth + 800 mL of LB
                                    5 with 200 mL LB broth + 800 mL of A tumafaciens

6 with 200 mL LB broth + 800 mL of E – Coli Superant change 500 mL cells either Agro-T9002 for sample A,B,C or Agro for D,E,F and 500 mL Sup + 200 mL SOB


9/22/10

The only one that should glow should be (C)/(3) E – Coli w/transformed part in LB For Supernate of A.Tumafaciens we will use suspended T9002 in agrobacteria prof T. set up yesterday as our 200 mL spl. - Today I will be electroporating part #’s I732094 (Lacz) – GFP, and part # F2620 (LuxR) into E – Coli Electrocomp cells. DG pulled the DNA parts from the Bio Brick and placed into 50 mL Electro comp E – Coli cells and 5 ml of DNA spls. now we will electroporate using protocol from pg 15 We recovered cells shooting 900 mL into Cuvette then drawing it off with electroplated cells. Placed at room temp to grow for 1 hr then place and suspend in LB/Amp (10 mL) - I took our streaked to try to get an Isolated Colony Streaking and Heating between each pass. then placed into incubator. - Results after letting incubate for 2 days we have found that the incubator was set to too low of a temp we raised the temp to 37 degrees C from 26 degrees C we will see where we are at on Tuesday.


9/23/10

Today I have been setting up for the trial of our part T9002 inside agrobacteria to see if in the presence of AHL it floureces.

1) I took and set up new growing Cultures of T9002 and E – Coli electro comp cells placed 5 mL into 50 mL sterile tubes one with Agro w/T9002 and one with E – Coli to make electro comp cells. 2) then drew off “2” 1 mL inciments of T9002 Sol. and placed 4.5 mL of Amp w/T9002 3) now we are ready to perform trial taking Clean 1.5 mL Centrifuge tubes labeling 1 – 6 the first contains 200 mL Argo/T9002 & 800 mL LB/Broth second w/200 mL Argo/T9002 w/800 mL Argobacteria Supernate. Third w/200 mL Argo/T9002 w/800 mL E – Coli Supernate (AHL) we are looking for a glow from this one Fourth 200 mL LB Broth – 800 mL LB Broth Fifth 200 mL LB Broth – 800 mL Argobacteria Sixth 200 mL LB Broth – 800 mL E – Coli Supernate Then they will all be tested inside a florimeter. Dylan is running a Spec reading on Agrobacteria/and Agro/w T9002 to see if the concentrations are close to the same. then do the trial he found that absorbance was 4 times higher so Dylan diluted the sample of T9002 ¼ adding LB – Lennox to this gave a spec reading of .303 and org. was .333 a difference of about 10 percent so we believe that will be ok we will work with this . See Dylans Lab notebook for more accurate details.

for now I will be making and washing electrocomp E – Coli cells to be frozen 1) spinning off supernate from cells in 50 mL Centifuge 2) then add 1 mL 10 percent glycerol and remove place in 1.5 mL centrifuge tube I will split cells into 6 centrifuge tubes adding 1 mL 10 percent glycerol and spin inside cold centrifuge @ 1000x for 10 min. 3) then repeat a total of 4 times 4) then leave about 40 mL of glycerol into the tubes and freeze @ -80 degrees C until needed.

I took the electro comp cells I’m about to wash and ran a spec read I took 20 mL of E – Coli cells and placed into 980 mL of 10 percent glycerol then vortexed to mix then pipetted on absorbance of .15 50 20 mL into 1000w 1000/.20 = 50 X .15 = 7.5 so our OD is 7.5 mL so what I did was split the cells into 6 seperate tubes to be washed following protocol from pg20 while Dylan runs the Trial on T9002 from pg25 For results see pg 30

== 9/24/10 ==


Today I’m testing absorbance of our trials @ 395nm 1) .733 @ 395nm .678 @ 395nm 2) .855 @ 395nm .586 @ 395nm 3) .892 @ 395nm .693 @ 395nm 4) .708 @ 395nm .733 @ 395nm 5) .700 @ 395nm .700 @ 395nm 6) .693 @ 395nm .729 @ 395nm Blank) .001 @ 395nm .001 @ 395nm

1) I will blank the spec using LB/Lennox made by GM on 4/9/10 2) –Change- I blanked using the LB – Lennox Broth w/200 mL of SOB media – both made by me. 3) I took and used the same Cuvette for every spec scan washing with DI water between every trial 4) Placing about 1 mL every trial 5) Set spec to 395nm we believe that their was too much absorbance in trials 4,5, & 6 so we will do same procedure using florimider. Results say that the GFP is not being expressed in the presence of (AHL)/#3)

- Prof T will now take sample ran in spec and run inside florimidor to check UV absorbance blanking with LB/SOB mixture. Now prof. T. is running the samples in the Fluo. he is blanking w/LB-SOB using 490ex and 510 EM filters Blank read out to .009 +/- .0006 10005 Fluo units for T9002 inside E – Coli Keeping Vol. the same for all spls. blank again before running spls. now running (A) (0) Fluo units we have no florescence (B) (160) Fluo units a little bit of florescence (C) (0) Fluo units this means GFP not producing (D) (0) Fluo units expected (E) (0) Fluo units expected (F) (0) Fluo units expected

Results show no presence of GFP so we will break cells open then test again.


9/28/10

Today we will be picking 2 colonies from the Lacz, LuxR electroporated plates that were streaked on 9/22/10 pg 26 1) we will pick 2 colonies from each plate and transfer 15 mL LB – Lennox 2) and 50 mL LB – Lennox with E – Coli & Agrobacteria growth. ( 2 tubes) 3) poured (2) 40 mL tubes of LB then added 40 mL of Amp to them 4) poured (4) 14 mL tubes of LB then added 14 mL of Amp to them Did all this inside Biological fume hood to keep sterile Now I will make LB – Lennox Broth (1L) 1) Weigh out 10 g LB – Lennox Broth powder and place into 500 mL 18 ohm H2O and dissolve inside microwave using Beverage setting 8 oz then autoclave 2) Repeat (2) twice for (1L) 3) 1) 10.0266 g 2) 10.0698 g 4) Placed each into 1L Capped Elenmyier flasks and added using a 500 mL grad cylinder filling with 500 mL 18 ohm H2O and adding 500 to each 1L flask 5) Capped and microwaved on beverage setting then shook to mix 6) Then placed in autoclave on liquid setting/ 121 degrees C for 15 min will place into fridge for use.


Your team picture
IvyTech-South Bend logo.png

Tell us more about your project. Give us background. Use this is the abstract of your project. Be descriptive but concise (1-2 paragraphs)

Team Example


Home Team Official Team Profile Project Parts Submitted to the Registry Modeling Notebook Safety
Retrieved from "http://2010.igem.org/Team:IvyTech-South_Bend/Notebook"