Team:Freiburg Bioware/NoteBook/Labjournal/September2

From 2010.igem.org

Revision as of 15:39, 29 September 2010 by Anissa (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

September

October
November

September

124. labday 19.09.2010

Continuation with Colony-PCR of pSB1C3_CD and ViralBrick motif Z34C

Investigator: Bea

Comment: Since the colony PCR of the last try did not work exactly the way we expected it, another colony PCR approach with new primers was conducted.

Loading plan:
upper lanes

M   CD1  CD2  CD3  CD4  CD5  CD6  CD7  CD8  CD9  CD10   +ctrl(CFP) +ctrl(BAP) -ctrl(pAAV_MCS)   11Q1  12Q1  13Q1 13Q2  M

lower lanes

M   11T41  11T42  11T43  11T44    12T41  12T42  12T43  12T44    13T41  13T42  13T43  13T44    14T41  14T42 14T43  14T44  M

Expected sizes of the PCR products are:

Cytosine deaminase (CD) = 1300bp
Z34C loops insertion motif = 220bp
Positive control 1 = CFP = 750bp
Positive control 2 = BAP_587 = 170bp

Results:
The Colony PCR of the Cytosine Deaminase (CD) did not work out. The detectable bands at around 700 bp correspond to CFP. Therefore, BioBrick production of the CD must be repeated. The following three bands represent the controls. Three different controls were used. The first corresponds to pSB1C3_CFP, the second to BAP_587 and third control is the negative control. Unfortunately now bands can be detected in the postive controls. A faint band can be seen in the negative control which is the only lane in which no band should be detectable.
The following bands after the three controls correspond to the approaches of the Z34C Viralbrick production. Some bands in the lower and the upper lanes show positive results. The corresponding inoculated overnight culture were centrifuged and prepared in order to perform a Mini-Prep tomorrow.

Freiburg10 ColonyPCR Results 19.09.2010.jpg

Comment: hmm, seems that the CD-assambly didn't work at all.. Should i try it again or are we gonna skip it for good due to other priorities?(kira)
No, we cannot skip it. Can we change something else?? Any ideas what we can alter in the protocol? Because problem is that we are still waiting for the tk... so we should aswell focus on the other prodrug activating enzmye!! (Bea)

Testtransduction of the final modified capsid coding constructs

Investigator: Adrian

Aim of the experiment:
During the project 22 silent nucleotide exchange mutations were introduced into the capsid coding construct to make it compatible with the RFC standards and to have single cutting restriction enzymes flanking the 453 and the 587 loop sequence. Two point mutations had to be dismissed, because either a first test transduction showed that the construct was not working anymore or the insertion of the synthesized gene posed serious problems, because the restriction enzyme did not work.
Finally, we have a construct that is shown to produce infectious particles comparable to the current AAV systems and carries 20 point mutations. Now we can announce that the Adeno-associated Virus is compatible to the RFC standard and the idea to replace the loop sequences via ViralBricks works!

Impression from the moment:

The construct with the insertion of the Rep and the Cap synthesis worked! Reintroduction of the KpnI restriction site recovered the functionality of the viral genome!

Miniprep of serveral constructs

Investigator: Stefan

Glycerol stocks were prepared:

B430 = pCerulean_ZEGFR:1907_Longlinker_VP2/3
B431 = pCerulean_CFP_Middlelinker_VP2/3_insCap
B432 = pCerulean_ZEGFR:1907_Shortlinker_VP2/3_insCap

Mini-Prep was performed according to the standard protocol

P527 = pCerulean_ZEGFR:1907_Longlinker_VP2/3 c = 230,61 ng/µl
P528 = pCerulean_CFP_Middlelinker_VP2/3_insCap c = 290,81 ng/µl
P529 = pCerulean_ZEGFR:1907_Shortlinker_VP2/3_insCap c = 269,39 ng/µl

Several other constructs were preped, but need to be confirmed before being added to plasmid/glycerol stock.

125. labday 20.09.2010

Picking the clones and preparing the over-night culture

Investigator: Kira

VP2/3_Gsat-linker as well as VP2/3_cap_Gsat-linker plates contain colonies, thus 3 clones from each plate were inoculated into 5 ml DYT+ 5ul Chloramphenicol and incubated @ 37 C

Minipreps and Sequencing of ViralBrick clones

Investigator: Achim

The following clones were prepped:

Quickligation:
- 11.1, c = 85,41 ng/µl
- 13.1, c = 96,93 ng/µl
T4-Ligation:
- 11.4, c = 76,42 ng/µl
- 12.1, c = 80,36 ng/µl
- 12.4, c = 85,43 ng/µl
- 13.1, c = 90,06 ng/µl
- 13.2, c = 80,87 ng/µl
- 13.4, c = 76,62 ng/µl
- 14.1, c = 76,50 ng/µl
- 14.2, c = 98,52 ng/µl

Clones 11.4, 12.1, 13.2, 14.2 (T4) were sent for sequencing.

Cloning of pCerulean_Affibody_VP2/3 and pSB1C3_Affibody_middlelinker_GFP_his

Investigator: Jessica

Comment:Affibody_VP2/3 will be cloned in pCerulean and Affibody_middlelinker will be cloned together with GFP_His in pSB1C3

P407= pCerulean_CFP_middlelinker c=482,76 ng/µl
P516= pSB1C3_ZEGFR:1907_VP2/3 clone 1 c= 191,6 ng/µl
P290= pSB1C3_Affibody_Middlelinker clone 1 c= 227,4 ng/µl
P518= pSB1C3_GFP_RFC25_upper band clone 1 c= 138,3 ng/µl
P520= pSB1C3_GFP_RFC25_lower band clone 1 c= 141,6 ng/µl

Digestion:

components	P407	P516	P290	P518	P520
DNA	3,5	10	7	10	10
BSA (10x)	2	2	2	2	2
Buffer 4 (10x)	2	2	2	2	2
EcoRI	0,8	0,8	-	-	-
AgeI	0,8	0,8	0,8	-	-
NgoMIV	-	-	-	0,8	0,8
SpeI	-	-	0,8	0,8	0,8
H₂O	10,9	4,4	7,4	4,4	4,4
Total volume	20	20	20	20	20

1,0 g Agarose,100 ml TAE (1%), 6 µl GELRED , at 120 Volt

P516, P518, P520 will be repeated tomorrow (no DNA after gel-ex)

Gelextraction:

The gelextraction was performed according to the standard protocol. DNA concentration of the extracts:

P407 c= 6,5 ng/µl
P516 c= - ng/µl
P290 c= 7,3 ng/µl
P518 c= - ng/µl
P520 c= - ng/µl

stands in 4°C room for comtinuation tomorrow

Cloning of P5_TATAless downstream of pSB1C3_001_RC_insrepcap_KpnI_back and P5 upstream of pSB1C3_001_RC_insrepcap_KpnI_back

Investigator: Anissa
Digestion of the constructs:

P320 = pSB1C3_001_RC_insrepcap_KpnI_back c=408 ng/µL
P320 = pSB1C3_001_RC_insrepcap_KpnI_back c=408 ng/µL
P180 = pSB1C3_pTAV2 (P5)clone 1 c=108,8 ng/µL
P184 = pSB1C3_pAAV_RC (P5TATAless)clone 3 c=176,9 ng/µL

Components	v_{P320 upstream} /µL	v_{P180 upstream}/µL	v_{P320 downsteam} /µL	v_{P184 downsteam}/µL
DNA	2,5	13,8	2,5	8,5
BSA (10x)	1,5	2	1,5	1,5
Buffer no. 4 (10x)	1,5	2	1,5	1,5
Enzyme 1	XbaI 1	SpeI 1	SpeI 1	XbaI 1
Enzyme 2	EcoRI 1	EcoRI 1	PstI 1	PstI 1
H₂O	7,5	0,2	7,5	1,5
Total volume	15	20	15	15

Loading plan:

M    P320(upstream)    P320(downstream)    P180    P184

Results:

After gel extraction has been performed, the ligation was carried out.

Ligation:

v_{=P320_up}=7,37µL
v_{=P180_up}=0,63µL
v_{=P320_down}=7µL
v_{=P184_down}=1µL

The ligation mix was transformed into XL1-Blue cells and plated on agar plates containing chloramphenicol.

Next steps:
Picking clones and perform Mini-Prep.

Test digestion of VP2-N-terminal fusion constructs

Investigator: Hanna

Comment: On Satureday a colony PCR was performed of:
1. pCerulean_Zegfr:1907_ShortLinker_VP2/3 (P530)
2. pCerulean_Zegfr:1907_SEG_VP2/3 (P531)
3. pCerulean_CFP_MiddleLinker_VP2/3 (P532)
4. pCerulean_6xHis_MiddleLinker_VP2/3 (P533)
5. pCerulean_6xHis_MiddleLinker_VP2/3_insCap (P534)
6. pCerulean_Zegfr:1907_MiddleLinker_VP2/3_insCap (P535)

Because all constructs (4 clones of each approach), including the negative control (pAAV_RFC25), showed positive results, one test digestion of each construct was performed.

Digestion

components	Components Master Mix /µl
BSA (10x)	7
Buffer 4 (10x)	7
EcoRI	3.5
SpeI	3.5
H₂O	35

--> 2 µL DNA + 8 µL Master Mix

Incubation: 1.5 h

Agarose-Gel:

0.4 g Agarose, 50 mL TAE (0.8 %), 3 µL GELRED, at 100 Volt, running time: 50 minutes

Sample	Sample/µl]	Loading dye (6x)/µl	Expected size 1	Expected size 2
P 530	10 µl	2 µl	2710 bp	3937 bp
P 531	10 µl	2 µl	2710 bp	3937 bp
P 532	10 µl	2 µl	2710 bp	3937 bp
P 533	10 µl	2 µl	2710 bp	3937 bp
P 534	10 µl	2 µl	2710 bp	3937 bp
P 535	10 µl	2 µl	2710 bp	3937 bp

Marker: GeneRuler ladder mix

	Marker /µL	Sample P530 /µl	Sample P531 /µl	Sample P532 /µl	Sample P533 /µl	Sample P534 /µl	Sample P535 /µl
Lane	4	12	12	12	12	12	12

Test Digestion N-terminal VP2 Fusion

Comment: Test digestion delivered positive results: Expected fragment size after VP2/3 fusion to Zegfr:1907_Linker: 2180 bp - compared to failed VP2/3 insertion: ~ 220 bp.
Expected fragment size after VP2/3 fusion to CFP_MiddleLinker: 2710 bp - compared to failed VP2/3 insertion: ~ 760 bp.
pCerulean_ZEGFR:1907_Longlinker_VP2/3
pCerulean_CFP_Middlelinker_VP2/3_insCap
pCerulean_ZEGFR:1907_Shortlinker_VP2/3_insCap
pCerulean_ZEGFR:1907_Shortlinker_VP2/3
pCerulean_ZEGFR:1907_SEG_VP2/3
pCerulean_CFP_MiddleLinker_VP2/3
pCerulean_6xHis_MiddleLinker_VP2/3
pCerulean_6xHis_MiddleLinker_VP2/3_insCap
pCerulean_ZEGFR:1907_MiddleLinker_VP2/3_insCap
will be sent for sequencing to GATC.

BioBrick production: PCR of pAAV_RC_InsRepCap_KpnIback_VP1-ko and VP2-ko

Investigator: Stefan

DNA samples were diluted 1:1000

P455 = pAAV_RC_1.2 SDM SalI
P463 = pAAV_RC_CapIns_prepSDM clone 3

PCR progam:

Ingredients	Volume P455 / µl	Volume P463 / µl
5X Phusion HF buffer	10	10
10 mM dNTP mix	1	1
forward primer: O93	2,5	2,5
reverse primer: O115	2,5	2,5
DNA Template	3	3
DMSO	2	2
Phusion Polymerase	0,5	0,5
H₂O	28,5	28,5
Total volume	50	50

PCR program:

Cycles	Temperature / °C	Time / s
1	98	60
2 ( step 2-4: 8x)	98	15
3	59	25
4	72	75
5 (step 5-6: 17x)	98	15
6	72	85
7	72	300
Hold	4	4

Gel:
0,5 g agarose (1%), 50 ml TAE, 3µl GELRED running time: 45 minutes at 110V

Gel-Extraction:
Gel-extraction was performed according to standard protocol. The complete amount eluted was used for PCR digestion.

Digestion of PCR product:

Components	PCR products Volume/µL
DNA	30
BSA (10x)	4
Buffer no. 4 (10x)	4
EcoRI	1
SpeI	1
H₂O	-
Total volume	40

Digestion was performed at 37 °C for 2 hours.

PCR-Purification:
Gel-extraction was performed according to standard protocol.

c (P455) = 13,5 ng/µl
c (P463) = ng/µl

Digestion of plasmid backbone:
Plasmid used: pSB1C3_VCK_Bla (P320)
c (pSB1C3_VCK_Bla) = 408,0 ng/ µl

Components	vector Volume/µL
DNA	3
BSA (10x)	2
Buffer no. 4 (10x)	2
EcoRI	1
SpeI	1
H₂O	11
Total volume	20

Digestion was performed at 37 °C for 2 hours.

Gel:
0,5 g agarose (1%), 50 ml TAE, 3µl GELRED running time: 50 minutes at 120V

Gel-Extraction:
Gel-extraction was performed according to standard protocol.
c(P320) = 0,8 ng/µl

Ligation:

1 µl T4 DNA ligase
1 µl 10x Buffer
8 µl DNA mix (vector + insert)

Amounts of DNA used:

c(P320) = 7,73 µl
c(P455) = 0,27 µl

c(P320) = 7,19 µl
c(P463) = 0,81 µl

Incubation time: 45 minutes at room temperature.

Transformation:
Transformation was performed according to standard protocol using XL1b cells and Chloramphenicol as antibiotic.

2x repetition of CD biobrick

Investigator: Kira

Ingredients	CD sample
5X Phusion HF buffer	10 µl
10 mM dNTP mix	1µl
forward primer: O158	2,5µl
reverse primer: O159	2,5 µl
DNA Template (1:100 dil)	0,5 µl
DMSO	0 µl
Phusion Polymerase	0,5 µl
H₂O	33µl
Total volume	50 µl

PCR program:

Cycles	Temperature	Time
	98°C	1
10x	98°C	15"
	58°C	25"
	72°C	40"
17x	98°C	15"
	65°C	25"
	72°C	40"
1x	72°C	5'
Hold 4°C

Digestion of plasmid backbone:

c (pSB1C3) = 151, 1 ng/ µl

Components	vector Volume/µL
DNA 1 µg	6,0 µl
BSA (100x)	0,2 µl
Buffer no. 4 (10x)	2,0 µl
Enzyme 1 XbaI	0,5 µl
Enzyme 2 AgeI HF	0,5 µl
H₂O	10,8 µl
Total volume	20

incubation @ 37 C for approx. 6 h

1% agarose gel

According to the gel results, PCR was repeated twice.. But both tries revealed the same unexpected results. Insert from the last cloning procedure was found and used for the ligation and further transformation.

Ligation
T4 ligase was used
1 ul T4 Buffer
1 ul T4 Ligase
8 ul (0,9 ul vector+ 7,1 ul insert) DNA-mix

incubation @ RT for 45 min

Transformation was performed according to the standard protocol and the cells were spread on the agar plate containing Chloramphenicol.

126. labday 21.09.2010

Trafo evalutation of CD biobrick plate

Investigator: Kira

the agar plate was checked at approx. 4 pm and there were no colonies visible. Taking in account that the plate was incubated from 10.30 pm till 8 am @ 37C due to the electricity failure, the plate was put back @ 37C at 4.30 pm

Comment: the plate was picked this morning by a lab member and put in the coldroom

Continuation of cloning of pCerulean_Affibody_VP2/3 and pSB1C3_Affibody_middlelinker_GFP_his

Investigator: Jessica

Comment:Affibody_VP2/3 will be cloned in pCerulean and Affibody_middlelinker will be cloned together with GFP_His in pSB1C3

P407= pCerulean_CFP_middlelinker c=482,76 ng/µl
P516= pSB1C3_ZEGFR:1907_VP2/3 clone 1 c= 191,6 ng/µl
P290= pSB1C3_Affibody_Middlelinker clone 1 c= 227,4 ng/µl
P518= pSB1C3_GFP_RFC25_upper band clone 1 c= 138,3 ng/µl
P520= pSB1C3_GFP_RFC25_lower band clone 1 c= 141,6 ng/µl

Digestion:

components	P516	P518	P520
DNA	10	10	10
BSA (10x)	2	2	2
Buffer 4 (10x)	2	2	2
EcoRI	0,8	-	-
AgeI	0,8	-	-
MscI	0,8	-	-
NgoMIV	-	0,8	0,8
SpeI	-	0,8	0,8
H₂O	3,6	4,4	4,4
Total volume	20	20	20

0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , at 120 Volt

Gelextraction:

The gelextraction was performed according to the standard protocol. DNA concentration of the extracts:

P516= c= ng/µl
P518= c= ng/µl
P520= c= ng/µl

T4 Ligation:

The Ligation was performed as following:

Vector Volume: µl
Insert Volume: µl

1µl T4-Ligase buffer (10x)
8µl (Vector + Insert) mix
1µl T4-Ligase

Incubating for 40 minutes.

Transformation:

Trafo was performed according to the standard protocol (XL1blue). The cells were plated on a agar plate with Kana/Cm

Sequencing result of pSB1C3_EGFP_His upper and (!) lower band

Investigator: Jessica
1. pSB1C3_EGFP_His suffix:

2. pSB1C3_EGFP_His prefix:

results look in both plasmids and are used for cloning of pSB1C3_Affibody_middlelinker_GFP_His

Midi-Prep of pHelper & pSB1C3_leftITR_CMV_beta-globin_mVenus_hGH_rightITR

Investigators: Chris W.

Midi-Preps of pHelper=P540 and pSB1C3_leftITR_CMV_beta-globin_mVenus_hGH_rightITR=P541

The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

plasmid-no.	P540	P541
concentration (ng/µl)	480,45	1264,20

New aliquots (60µl) of XL1blue can be used ! (Jessica)

127. labday 22.09.2010

Sequencing results of ViralBrick ligations using dephosphorylated vector

Investigator: Achim

Sequencing confirmed a correct sequence for clone 11.4 (453 Z34C). Clone 12.1 (587 Z34C)has several missing bases at the 3' end of the insert, clone 13.2 has an a -> c mutation and a c insertion in the insert (although the a->c might be a sequencing error.). Clone 14.2 contained a c deletion.

We have several new approaches:

-Correction of the mutations via PCR: We'll use the hybridisation oligo for the side of the insert containing the mutations, the rfc 25 primer on the other side. The amplified insert will be ligated into dephosphorized vector.

-As a backup, SDM-primers will be ordered and should be available next week.

-Also, a new colony pcr with several clones from the last ligation plates will be carried out.

-clone 13.4 (already prepped) will be sent for sequencing

Cloning pSB1C3_Viral Brick 587KO-empty (B274/P542) into pSB1C3_VP2/3_Capins (B438/P514)

Investigator Patrick
After an over night digestion with BamHI and PvuII at 37°C ....

My dear friend - what do you mean with "..."?? overnight digest at which temperature?? Did you look it up whether the enzymes show star activity at longer digestions or not?? ;-)

The Gelextraction with P514 was performed according to the standard protocol yielding 16,9 ng/ml.
The P542 insert should be 48 bp long and therefore was extracted with a QIAGEN kit able to extract even very small DNA fragments (40 bp) (QiaEX II Gel Extraction Kit (150)).

Expected size of the fragments:
P542: 2112 & 48 bp
P514: 3956 & 48 bp

The 48 bp band of P514 can't be seen clearly on the picture due to the bad resolution.

Ligation with T4 DNA ligase: 1 µl buffer (10x), 1 µl T4 DNA ligase, 7 µl Vector, 1 µl Insert, 70 minutes.

The transformation with XL1B was performed according to the standard protocol and plated: pSB1C3_VP2/3_Capins_587KO-empty

Cellculture: Serum-free cells

Investigator Patrick
We want our virus production to be serum-free to simplify the following purification.
15 ml cell-medium, 25% serum-free: 3,75 ml serum-free DMEM + 11,25 ml DMEM
15 ml cell-medium, 50% serum-free: 7,5 ml serum-free DMEM + 7,5 DMEM

PCR of P40

Investigator: Jessica
DNA sample P432 was diluted 1:1000

Ingredients	Volume / µl
5X Phusion HF buffer	10
10 mM dNTP mix	1
forward primer: O152	2,5
reverse primer: O188	2,5
DNA Template	3,0
DMSO	-
Phusion Polymerase	0,5
H₂O	31
Total volume	50,5

PCR program:

Cycles	Temperature / °C	Time / s
	98	60
8x	98	15
	61	25
	72	8
17x	98	15
	69	25
	72	8
1x	72	300
Hold	4

Digestion of plasmid backbone:
Plasmid used: pSB1C3_CFP (P51.2)
c (pSB1C3_CFP) = 151, 1 ng/ µl

Components	vector Volume/µL
DNA	10
BSA (10x)	2
Buffer no. 4 (10x)	2
XbaI	1
PstI	1
H₂O	4
Total volume	20

incubation @ 37 C for approx. 2 h

Comment:

Digestion of PCR product:

Components	PCR products Volume/µL
DNA	40
BSA (10x)	6
Buffer no. 4 (10x)	6
PstI	2
XbaI	2
H₂O	4
Total volume	60

Digestion was performed at 37 °C for 2 hours.

PCR-Purification:

c (P432) = 31,8ng/µl

Gel-Extraction:
Gel-extraction was performed according to standard protocol.
c(P51.2) = 3,7ng/µl

Ligation:

1 µl T4 DNA ligase
1 µl 10x Buffer
8 µl DNA mix (vector + insert)

Amounts of DNA used:

(P51.2) = 7,74 µl
(P432) = 0,26µl

Incubation time: 45 minutes at room temperature.

Transformation:
Transformation was performed according to standard protocol using XL1b cells and Chloramphenicol as antibiotic.

Mini-Prep and test digestion of pSB1C3_001_RC_InsRepCap_KpnIback_VP1-ko

Investigator: Stefan

Comment:

Glycerol stocks were prepared:

B463 = pSB1C3_001_RC_InsRepCap_KpnIback_VP1-ko_P5tataless clone 1
B464 = pSB1C3_001_RC_InsRepCap_KpnIback_VP1-ko_P5tataless clone 2

Mini-Prep was performed according to standard protocol:

P548 = pSB1C3_001_RC_InsRepCap_KpnIback_VP1-ko_P5tataless clone 1 c = 435,82 ng/µl
P549 = pSB1C3_001_RC_InsRepCap_KpnIback_VP1-ko_P5tataless clone 2 c = 409,21 ng/µl

Test digestion:

Results:

Cloning of CMV promotor into pSB1C3_VP123_inscap

Investigator: Anna

Vector name: pSB1C3_VP123_inscap P489
Insert name: pSB1C3_CMV P193
new vector name: pSB1C3_CMV_VP123_capins P580
buffer used: 4
DNA concentration (vector): 350,0 ng/µl ; DNA concentration (insert): 333,5 µg/µl

components	volume of pSB1C3_VP123_capins /µl	volume of pSB1C3_CMV /µl
DNA	3	4,5
BSA (10x)	1,5	1,5
Buffer 4 (10x)	1,5	1,5
Enzyme I	EcoI HF 1	EcoI HF 1
Enzyme II	XbaI 1	SpeI 1
H2O	7	5,5
Total volume (e.g. 15,20,25,30 µl)	15	15

0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 120 Volt, running time:45

Loading plan for agarose gel:
Loading dye with SDS (6X), 3 µl
Marker used: GeneRuler ladder mix (Fermentas), 4 µl

	Marker	Sample 489, 18µl	Sample 193, 18µl
Lane	1	3	5
Fragment size		4404 bp	681 bp

Gel extraction:

	pSB1C3_VP123_capins_cut	CMV
DNA-concentration [ng/µl]	14,09	32,61

T4 Ligation:
Volume vector: 3,86 µl
Volume insert: 4,14 µl

Transformation:

Was performed following the standard protocol using XL1B cells.

Sequencing of Zegfr:1907-Linker Library, His-Tag and imaging appoaches

Investigator: Hanna

Comment: After several problems were managed (cloning difficulties, colony PCR troubles, interchanges of samples,...), sequences of the final constructs needed to be verified in order to test the constructs in cell culture.

Sample gallery
pCerulean_CFP_MiddleLinker_ VP2/3_InsCap (P528) forward	pCerulean_CFP_MiddleLinker_ VP2/3_InsCap (P528) reverse
pCerulean_ZEGFR:1907_ShortLinker_ VP2/3_InsCap (P527) forward	pCerulean_ZEGFR:1907_ShortLinker_ VP2/3_InsCap (P527) reverse
pCerulean_6xHis_MiddleLinker_ VP2/3 (P533) forward	pCerulean_6xHis_MiddleLinker_ VP2/3 (P533) reverse
pCerulean_6xHis_MiddleLinker_ VP2/3_insCap (P534) forward	pCerulean_6xHis_MiddleLinker_ VP2/3_insCap (P534) reverse
pCerulean_ZEGFR:1907_MiddleLinker_ VP2/3_insCap (P535) forward	pCerulean_ZEGFR:1907_MiddleLinker_ VP2/3_insCap (P535) reverse
pCerulean_ZEGFR:1907_SEG_ VP2/3_insCap (P502) reverse	pCerulean_ZEGFR:1907_LongLinker_ VP2/3_insCap (P503) reverse
pCerulean_ZEGFR:1907_MiddleLinker_ VP2/3 (P504) reverse

Comment: Sequences looked well. The 6 samples with VP2/3_insCap will be tested today in cell culture.

Mass Midi-Prep

Investigator: Chris W.

Midi-Prep of:

pSB1C3_001_RC_InsRepCap_KpnIback_P5tataless clone 1 =P544
pSB1C3_001_RC_InsRepCap_KpnIback_P5tataless clone 2 =P545
pSB1C3_001_P5_RC_InsRepCap_KpnIback clone 1 =P546
pSB1C3_001_P5_RC_InsRepCap_KpnIback clone 2 =P547
pHelper =P550
pHelper =P551
pSB1C3_litr_pTert_ßglobin_mvenus_hgh_ritr clone 1 =P552
pAAV_RC_RepCapIns_SDMKpnl_VP1ko clone 1 =P553
pAAV_RC_RepCapIns_SDMKpnl_VP2ko clone 1 =P554
pAAV_RC_RepCapIns_SDMKpnl_VP2ko clone 1 =P555
pCerulean_ZEGFR:1907_SEG_VP2/3_CapIns clone 3 =P556
pCerulean_ZEGFP:1907_LongLinker_VP2/3_CapIns clone 2 =P557
pCerulean_CFP_Middlelinker_VP2/3_insCap =P558
pCerulean_ZEGFR:1907_Shortlinker_VP2/3_insCap =P559
pCerulean_6xHis_MiddleLinker_VP2/3_insCap =P560
pCerulean_ZEGFR:1907_MiddleLinker_VP2/3_insCap =P561
pCerlulean_ZEGFR:1907_Shortlinker_VP2/3_insCap clone 4.8 =P562

The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

plasmid-no.	P544	P545	P546	P547	P550	P551	P552	P553	P554	P555	P556	P557	P558	P559	P560	P561	P562
concentration (ng/µl)	1851,91	1822,3	1783,48	2625,57	1524,63	3333,48	2641,57	2165,22	1818,23	2318,58	3255,81	2818,15	2761,32	3289,23	3134,26	3725,27	1965,28

RNA isolation and cDNA synthesis

Investigator Kira

Motivation: in order to figure out if our cell lines do express telomerase, cell pellets were used for RNA isolation.

RNeasy Kit was used for RNA isolation. The cells were harvested and pellets washed 2x with PBS. add RLT buffer
homogenize the lysate with syringe ans blunt needle
add 1 volume of 70% EtOH
centrifuge for 15s @ 10.000 rpm
add 700 ul Buffer RW1 and centrifuge again
add 500 ul Buffer RPE and centrifuge
add 500 ul Buffer RPE and centifuge for 2 min
place the column in 1.5 ml tube and add RNase free water (50 ul)

concentrations:
c(293)= 41, 68 ng/ul
c(a431) = 135, 48 ng/ul

Gel apparatus (chamber, tray and comb) for RNA purity gel has to be prepared a day ahead with : water, SDS and NaOH

cDNA synthesis

Investigator: Kira

The yielded DNA was used for cDNA synthesis.
QuantiTect Reverse Transcription (Qiagen) reaction was performed according to the manufacturer protocol. DNA elimination reaction mix:

components	a431/µl	293/µl
7xgDNA Wipeout Buffer	2	2
Template RNA	1,6	2
RNase-free H2O	10,4	10
Total volume	14	14

Reverse-transcription reaction mix:

components	1xreaction	MM
Quantiscript Reverse Transcriptase	1	3
5x Quantiscript RT buffer	4	12
RT primer Mix	1	3
DNA elimination reaction mix	14	-
Total volume	20	-

incubation for 15 min @ 42C
incubation for 3 min @ 95C

128. labday 23.09.2010

PCR of VB constructs to remove mutations

Investigator Achim

Colony PCR of new clones from the last ligations

Investigator Achim

Sequencing of the previously picked clones revealed that the inserts were successfully cloned into pSB1C3. Sadly, apart from 453 Z34C every other insert contained various mutations (deletions, insertions, base exchanges in different positions). The reasons are unclear, probably difficulties with the fill in reaction or incorrectly synthesized oligos. We picked more clones from the last ligations' plates and carried out a colony pcr on them:

Contuniation: Cloning pSB1C3_Viral Brick 587KO-empty (B274/P542) into pSB1C3_VP2/3_Capins (B438/P514)

Investigator Patrick
3 Clones were picked in the morning and in each case inoculated 10 ml DYT. Clone 3 didnt grew fast enough. There were not enough bacteria in the eppi even after 8 ml were centrifuged. The mini-prep of clone 1 and 2 was performed according to the standrd protocol yielding the following concentrations:
Clone 1: 36,64 ng/µl
Clone 2: 7,8 ng/µl
Therefore only clone 1 was sent for sequencing (labelling: pat1, primer:VR2) and only this clone received a plasmid number: P569
No test-digestion was performed.
Because all medium was used to receive a sufficient amount of bacteria from clone 1 there was no cell suspension left to prepare a glycerol stock. Therefore again each clone was used to inoculated 10 ml DYT, following a mini-prep tomorrow.

Sequencing results:

Obviously there is something wrong with the backbone or the sequencing.

Mini-Prep and test digestion of pCerulean_Affibody_VP2/3, pSB1C3_Affibody_middlelinker_EGFP_His, pSB1C3_001_RC_InsRepCap_KpnIback_VP2-ko

Investigator: Jessica

Comment:

Glycerol stocks were prepared:

B465 = pCerulean_ZEGFR:1907_VP23 clone1
B466 = pCerulean_ZEGFR:1907_VP23 clone2
B467 = pSB1C3_ZEGFR:1907_middlelinker_EGFP_His clone1
B468 = pSB1C3_ZEGFR:1907_middlelinker_EGFP_His clone2
B469 = pSB1C3_001_RC_InsRepCap_KpnIbackVP2-KO clone1
B470 = pSB1C3_001_RC_InsRepCap_KpnIbackVP2-KO clone2

Mini-Prep was performed according to standard protocol:

P563 = pCerulean_ZEGFR:1907_VP23 clone1 = 227,4 ng/µl
P564 = pCerulean_ZEGFR:1907_VP23 clone2 = 337,2 ng/µl
P565 = pSB1C3_ZEGFR:1907_middlelinker_EGFP_His clone1 = 252,7 ng/µl
P566 = pSB1C3_ZEGFR:1907_middlelinker_EGFP_His clone2 = 209,5 ng/µl
P567 = pSB1C3_001_RC_InsRepCap_KpnIback_VP1-KO clone1 = 304,7 ng/µl
P568 = pSB1C3_001_RC_InsRepCap_KpnIback_VP1-KO clone2 = 383,1 ng/µl

Test digestion of

P563 = pCerulean_ZEGFR:1907_VP23 clone1

P564 = pCerulean_ZEGFR:1907_VP23 clone2

P565 = pSB1C3_ZEGFR:1907_middlelinker_EGFP_His clone1

P566 = pSB1C3_ZEGFR:1907_middlelinker_EGFP_His clone2

Components	P563-566 Volume/µL
DNA	2
BSA (10x)	1
Buffer no. 4 (10x)	1
PstI	0,5
XbaI	0,5
H₂O	5
Total volume	10

Results:

P566 = P565 ; P567 = P566 - P566 is not OK!!!
P563 and P566 was sent for sequencing with primer VF2 and VF2/VR2

PCR for 587 Z34C ViralBricks

Investigators: Achim, Anna

Plasmids used as template:

12_T4_1: c = 80,36 ng/µl
13_T4_2: c = 80,87 ng/µl
14_T4_2: c = 98,52 ng/µl

Primer used:

Template	Primer for	Primer rev
12_T4_1	RFC25	O146
13_T4_2	RFC25	O148
14_T4_2	O149	RFC25

Ingredients	Volume / µl
5X Phusion HF buffer	10
10 mM dNTP mix	1
forward primer: see above	2,5
reverse primer: see above	2,5
DNA Template (1:100 dilution)	1,0
DMSO	1,0
Phusion Polymerase	0,5
H₂O	31,5
Total volume	50

PCR program:

Cycles	Temperature / °C	Time / s
	98	60
	98	15
25x	68	25
	72	10
1x	72	300
Hold	4°C

Digestion of samples:

Restriction enzymes used: BamHI and PvuI.

Comment:

PCR of Vp1_ex, Vp2_ex and Vp3_ex and cloning into pSB1C3_001

Investigator: Anissa

DNA sample P72 (pkex_Vp1), P73(pkex_Vp2) and P74(pkex_Vp3) were diluted 1:100
used primers: O89 = Präfix_Vp1ex, O90= Präfix_Vp2ex, O91= Präfix_Vp2ex, O92= Suffix_Vp123ex, O120= Suffix_Vp123ex_reg

Ingredients	Volume / µl
5X Phusion HF buffer	10
10 mM dNTP mix	1
forward primer: O152	2,5
reverse primer: O188	2,5
DNA Template	2,0
DMSO	1
Phusion Polymerase	0,5
H₂O	30,5
Total volume	50

PCR program:

Cycles	Temperature / °C	Time / s
1x	98	60
25x	98	15
25x	60	25
25x	72	55
1x	72	5
Hold	4

Comment:The primer O120 was firstly given to the samples. It's a different primer for the Vp123_suffix, which binds to the regulatory-sequence. Because there was no knowledge, if the Vp_ex constucts have this sequence or not, O92 was also given to the samples.

Comment:Because gel-picture showed only DNA within the gel-bags, PCR was repeated.

Digestion of plasmid backbone:
Plasmid used: pSB1C3_001 (P320)
c (pSB1C3_001) = 408 ng/ µl

Components	vector Volume/µL
DNA	2,5
BSA (10x)	1,5
Buffer no. 4 (10x)	1,5
SpeI	1
NgomIV	1
H₂O	7,5
Total volume	15

incubation @ 37 C for approx. 1,5 h

Comment:Strangely, PCR-products did not run into the gel, altough the PCR was repeated, after first PCR had two reverse primers in the sample. This could be because of a complex with the polymerase.However, ligation will be continued with the DNA within the bags.

</br>

Digestion of PCR product:

Components	PCR products Volume/µL
DNA	20
BSA (10x)	3
Buffer no. 4 (10x)	3
SpeI	1
NgomIV	1
H₂O	2
Total volume	30

Digestion was performed at 37 °C for 2 hours.

PCR-Purification:

was peformed according the standard-protocol.

c (P432) =-- ng/µl

Comment:THE WHOLE PCR WILL BE REPEATED ONCE AGAIN

RNA Purity Gel

Investigator: Kira
10x FA buffer: 200mM MOPS, 50mM Sodium Acetat, 10mM EDTA, RNase free water
1x FA running buffer: 10x FA buffer, 37% Formamid, RNAase free water

Agarose gel: Agarose 0,6 g; 10x FA Buffer 5ml; RNAse free water 45ml; 37% Formamid 0,9 ml

hTERT PCR Reaction

Investigator: Kira

@Kira: Do you think that we can (suggestion?) use the A431 for detection of gene expression driven by phTERT promoter?? We should keep in mind that the transduction efficieny will not be that well ;-) (Bea)

Ingredients	Volume / µl
10x PCR buffer	2
10 mM dNTP mix	0,4
50mM MgCl2	0,6
Primer 1	0,5
Primer 2	0,5
cDNA template	1
Taq Polymerase	0,1
H₂O	14,9
Total volume	20

PCR program:

Cycles	Temperature / °C	Time
1x	94	3min
30x	94	45sec
	51	30
	72	1min 30sec
1x	72	10
Hold	4

1% agarose gel:

Evaluation: The agarose gel reveals that all samples show telomerase activity but in different levels.

Cloning of pBAD_Affibody_middlelinker_EGFP_His

Investigator: Jessica

Vector: name: pBAD_ OmpA His FluA LL Foki PGerrit
Insert: name: pSB1C3_ZEGFR:1907_middlelinker_EGFP_His P566
new vector name: pBAD_ZEGFR:1907_middlelinker_EGFP_His P
buffer used: 4
DNA concentration (vector): 97,0 ng/µl ; DNA concentration (insert): 209,5 µg/µl

components	volume of pBAD_ OmpA His FluA LL Foki /µl	volume of pSB1C3_ZEGFR:1907_middlelinker_EGFP_His /µl
DNA	10	6
BSA (10x)	2	2
Buffer 4 (10x)	2	2
Enzyme XbaI	0,8	0,8
Enzyme AgeI	0,8	0,8
H2O	4,4	8,4
Total volume (e.g. 15,20,25,30 µl)	20	20

0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 120 Volt

Loading plan for agarose gel:
Loading dye with SDS (6X), 3 µl
Marker used: GeneRuler ladder mix (Fermentas), 6 µl

	Marker	Sample PGerrit, 20µl	Sample 566, 20µl
Lane	1	3	5
Fragment size		4047 bp	963 bp

Gel extraction:

	pBAD	Affibody_middlelinker_EGFP_His
DNA-concentration [ng/µl]	8,3	10,2

T4 Ligation:
Volume vector: 5,06 µl
Volume insert: 2,94 µl

Transformation:

XL1B cells were used.

Picking clones of pSB1C3_CMV_VP123_inscap

Investigator: Anna

Three clones were picked (10 ml DYT, 10 µl Cm).

Cloning of * into pSB1C3_CFP

Investigator: Chris W.

Vector: name: pSB1C3_CFP P51,2
Insert: name: email Hybrid Oligo (O184&O185)
new vector name: pSB1C3_email
buffer used: 4
DNA concentration (vector): 151,0 ng/µl ; DNA concentration (insert): 95,3 µg/µl

Interesting, where does the promoter come from the new annotared vector?? ;-)

components	volume of pSB1C3_CFP /µl	volume of email/µl
DNA	6	15
BSA (10x)	2	2
Buffer 4 (10x)	2	2
Enzyme I	NgoMIV 1	NgoMIV 1
Enzyme II	SpeI 1	SpeI 1
H2O	8,4	-
Total volume (e.g. 15,20,25,30 µl)	20	20

0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 120 Volt, running time:45

Loading plan for agarose gel:
Loading dye with SDS (6X), 4 µl
Marker used: GeneRuler ladder mix (Fermentas), 3 µl

	Marker	Sample Insert, 20µl	Sample Vector, 20µl
Lane	1	3	5
Fragment size		70 bp	2070 bp

Gel extraction:

	pSB1C3_CFP_cut	email
DNA-concentration [ng/µl]	7,8	27,4

T4 Ligation:
Volume vector: 8,74 µl
Volume insert: 0,26 µl

Transformation:

XL1B cells were used.

Repetition: Cloning of P5_TATAless downstream of pSB1C3_001_RC_insrepcap_KpnI_back and P5 upstream of pSB1C3_001_RC_insrepcap_KpnI_back

Investigator: Stefan
Digestion of the constructs:

P432 = pSB1C3_001_RC_insrepcap_KpnI_back c=344,5 ng/µl
P432 = pSB1C3_001_RC_insrepcap_KpnI_back c=344,5 ng/µl
P180 = pSB1C3_pTAV2 (P5)clone 1 c=108,8 ng/µl
P184 = pSB1C3_pAAV_RC (P5TATAless)clone 3 c=176,9 ng/µl

My dear friend, did you mix up the Rep-Cap constructs in the plasmid list? P432 = pAAV_RC_insRepCap_KpnI-back ;)

Components	V P432up /µL	VP180up /µL	V P432down /µL	V P184down /µL
DNA	4,5	14	4,5	11
BSA (10x)	2	2	2	2
Buffer no. 4 (10x)	2	2	2	2
Enzyme 1	XbaI 1	SpeI 1	SpeI 1	XbaI 1
Enzyme 2	EcoRI 1	EcoRI 1	PstI 1	PstI 1
H₂O	9,5	9,5	-	3
Total volume	20	20	20	20

Results:

Gel-Extraction: Gel-Ex was performed according to protocol. The following concentrations were measured:

432up c= 25,73 ng/µl
180up c= 9,57 ng/µl
432down c= 27,34 ng/µl
184down c= 17,80 ng/µl

Ligation:
The following DNA mixes were used for ligation:

432up V= 6,3 µl
180up V= 1,7 µl

432down V= 6,93 µl
184down V= 1,07 µl

Transformation:
The transformation was performed according to standard protocol using BL21 cells. They were plated on agar plates containing chloramphenicol and stored in 37°C room overnight.

129. labday 24.09.2010

Sequencing results of VB 13.4

Investigator: Achim

We sent in another clone of the 587 KO Z34C motif to see if it carries the same mutations as the first one. If that had been the case, we could account the mutations to faulty oligos. However, sequencing showed that the second 587 KO Z34C clone is mutated as well, but in different positions. So we either recieved oligos containing various mutations, or the fill-in reaction was faulty in spite of the proofreading activity of the klenow fragment.

Because 587 KO Z34C is one of our more promising approaches, we sent another two clones from our second colony pcr/clone picking round for sequencing: 13.1 and 13.4

Contuniation: Cloning pSB1C3_Viral Brick 587KO-empty (B274/P542) into pSB1C3_001_VP2/3_Capins (B438/P514)

Investigator Patrick
Because of the sequencing results of clone 1 a mini-prep was performed only with clone 2 and 3 yielding the following concentrations:
pSB1C3_VP2/3_Capins_587KO-empty clone 2: 195 ng/µl
pSB1C3_VP2/3_Capins_587KO-empty clone 3: 224,74 ng/µl

Testdigestion:
pSB1C3_VP2/3_Capins_587KO-empty clone 2 (P578/B472): 3 µl Buffer 4, 0,5 µl BamHI, 0,5 µl PvuII, 22 µl DNA, 4 µl H2O
pSB1C3_VP2/3_Capins_587KO-empty clone 3 (P579/B473): 23 µl Buffer 4, 0,5 µl BamHI, 0,5 µl PvuII, 20 µl DNA, 6 µl H2O
Because somebody switched the 37°C thermoblock off i dont know the exact digestion time. Therefore i switched the thermoblock on again and waited 1 hour. I used that much DNA because the desired insert is 48 bp long.

Clone 3 was sent for sequencing.

Sequencing evaluation of VP2/3_Gsat-linker and VP2/3_cap_Gsat-linker

Investigator Kira

Comment: pSB1C3_VP2/3_cap_Gsat-linker as well as pSB1C3_VP2/3_Gsat-linker can be used for further experiments.

New CD primer ordered

Investigator Stefan

Comment: CD reverse primer was incorrect. A new primer was ordered.

Sequencing of pCerulean_Zegfr:1907_VP2/3

Investigator Hanna

Because I found out, that this plasmid was sent to GATC with the wrong sequencing primers (therefore no sequencing results were available), I sent it again with the GATC_std_CMV-F primer.
--> backbone = pCerulean and not pSB1C3!!! ;)

Repetition: PCR for biobrick production: Cloning RepCap into pSB1C3

Investigator: Stefan

Comment: Construct was cloned mixed RFC10 and RFC25. Therefore, a new approach will be performed consisting of RFC10 only.

Plasmid used:

pAAV_RC_RepCapIns_SDMKpnI (P432) A 1:1000 dilutionof the plasmid was prepared.

PCR protocol:

Ingredients	P432 (v/µl)
5X Phusion HF buffer	10
10 mM dNTP mix	1
forward primer: O93	2,5
reverse primer: O121	2,5
DNA Template	3
DMSO	-
Phusion Polymerase	0,5
H₂O	30,5
Total volume	50

PCR program:

Cycles	Temperature /°C	Time /s
1	98	60
2 (8x step 2-4)	98	15
3	59	25
4	72	70
5 (17x step 5-6)	98	15
6	72	80
71x	72	300
Hold 4°C

Digestion of the vector:

components	pSB1C3_VCK_Bla (P320) (v/µl)
DNA	3,5
BSA	2
Buffer 4 (10x)	2
SpeI	1
EcoRI	1
H₂O	10,5
Total volume	20

Comment:Digestion was performed 2 hours at 37 °C.

Gel:
0,5 g Agarose,50 ml TAE (1%), 3 µl Gelred , at 110 Volt; run for ~50 minutes

Gelextraction:

The gelextraction was performed according to the standard protocol. DNA concentration of the vector:

pSB1C3 (P320): c= 8,5 ng/µl

Digestion of the PCR-products:

components	PCR product (v/µl)
DNA	30
BSA	4
Buffer 4 (10x)	4
SpeI	1
EcoRI	1
H₂O	-
Total volume	40

Comment:Digestion was performed 2 hours at 37 °C.

PCR purification:
Purification was performed accoding to the standard protocol. The following concentrations were measured:

PCR of P432: c= 6,4 ng/µl

Ligation:
1 µl T4 Ligase buffer (2x) 8 µl DNA mix 1 µl T4 Ligase
Incubating for 45 minutes at room temperature.

The Ligation was performed using the following amounts of DNA:

Vector Volume: 0,92 µl
Insert Volume: 7,08 µl

Transformation:

Trafo was performed according to the standard protocol using XL1b cells. The cells were plated on a agar plates containing chlorampenicol.

Picking clones of pSB1C3_CFP_email

Investigator: Anna

Three clones were picked (10 ml DYT, 10 µl Chloramphenicol).

MiniPreps and Test digestion of pSB1C3_CMV_VP123_capins

Investigator: Anna

Sample	Concentration [ng/µl]
pSB1C3_CMV_VP123_capins_clone1	377,29
pSB1C3_CMV_VP123_capins_clone2	369,92
pSB1C3_CMV_VP123_capins_clone3	387,57

Test digestion:

Components	Volume /µl
DNA	2
BSA	-
Buffer 4 (10x)	1
EcoRI	0,5
NgoMIV	0,5
H₂O	6
Total volume	10

Expected size (CFP): 681 bp

Comment: Clone 1 was sent for sequencing with the following primers: VF2, 4000 for, 4200 rev, 2800 for and 2800 rev.

MiniPreps of 587 Z34C ViralBricks and pSB1C3_p40

Investigator: Anna

Sample	Clone	Concentration [ng/µl]
pSB1C3_587_KO_Z34C	13.1	266,97
pSB1C3_587_KO_Z34C	13.4	277,47

Comment: Both clones were sent for sequencing.

Sample	Clone	Concentration [ng/µl]
pSB1C3_p40	1	266,97
pSB1C3_p40	2	277,47
pSB1C3_p40	3	167,20

Re-Trafo of DARPin

Investigator Stefan

Comment: A Re-Trafo of the synthesized DARPin was performed using XL1b cells.

130. labday 25.09.2010

Sequencing of VB: 13.1, 13.4 (approach w. dephosphorylated vector, second clone picking round

Investigator: Achim

The two clones that were sequenced both contained a deletion in the same position in the insert. We really seem to have bad luck picking clones. Hopefully our PCR attempt works better.

Miniprep of serveral constructs

Investigator: Jessica

Glycerol stocks were prepared:

B489 = pBAD_EGFP_His clone1
B490 = pBAD_EGFP_His clone2
B491 = pBAD_EGFP_His clone3
B492 = pSB1C3_CFP_email clone 1
B493 = pSB1C3_CFP_email clone 2
B494 = pSB1C3_CFP_email clone 3

Mini-Prep was performed according to the standard protocol

P588= pBAD_EGFP_His clone1 c=71,0 ng/µl
P589 = pBAD_EGFP_His clone2 c=74,8 ng/µl
P590 = pBAD_EGFP_His clone3 c=58,3 ng/µl
P591 = pSB1C3_CFP_email clone 1 c=132,7 ng/µl
P592 = pSB1C3_CFP_email clone 2 c=168,9 ng/µl
P593 = pSB1C3_CFP_email clone 3 c=153,6 ng/µl

Test digestion:

Components	Volume P588-590 /µl	Volume P591-593 /µl	Volume P583-585 /µl
DNA	4,5	2,5	2
BSA	1	1	1
Buffer 4 (10x)	1	1	1
XbaI	0,4	0,4	0,4
PstI	0,4	0,4	0,4
H₂O	2,7	4,7	5,2
Total volume	10	10	10

Expected size : bp

Comment: test digestion of P591-593 and P583-585 (pSB1C3_P40) is just an attempt because I can't find any sequences in geneious.P583 looks well. P591, P588 and P583 will be sent for sequencing on monday.

Sequencing results of pSb1C3_Affibody_middlelinker_EGFP_His

Comment: there was anywhere a problem in the cloning process. approach will be repeated today. there is pBAD_EGFP_His, affibody_middlelinker will be cloned in, also in pSB1C3_EGFP_His

Sequencing result of pSB1C3_CMV_VP123_capins_clone1

Investigators: Volker, Anna

For test digestion go to labday 24.09.10

Comment: The following primers were used for sequencing: VF2, 4000 for, 4200 rev, 2800 for and 2800 rev. There is a point mutation in the non-coding sequence, which should not influence the performence of the construct, so it can be used for further cloning steps.

Cloning of 453 and 587 ViralBricks into pSB1C3_CMV_VP123_capins

Investigators: Achim, Anna

Vector name: pSB1C3_CMV_VP123_capins P580
Inserts: different ViralBricks (see pdf underneath), pSB1C3_VCK_Bla P320
buffer used: 4

Update: ViralBricks ready to use:

media:Freiburg10_Production of ViralBricks_new.pdf

Digestion of vector and inserts:

media:Freiburg10_Cloning of ViralBricks into pSB1C3_CMV_VP123_capins.pdf

The vector p580 was dephosphorylated.
Two gels were prepared with 1 g Agarose, 100 ml TAE (1%) and 6 µl GELRED; at 120 Volt, running time:45

Gel run:
Loading dye(6X), 6 µl
Marker used: GeneRuler ladder mix (Fermentas), 3 µl

Expected sizes of fragments: see Pdf under Gel extraction and overnight T4 Ligation

Gel extraction and overnight T4 Ligation:

media:Freiburg10_Cloning of ViralBricks into pSB1C3_CMV_VP123_capinsII.pdf

Sequencing results: pSB1C3_001_VP2/3_HSPG-KO

Investigator: Hanna

Comment: In order to knock down the natural tropism of the virus, the HSPG knock-out motif (two aa exchanges) was cloned into VP2/3. This fragment can then be used for the VP2 N-terminal fusion or VP1 insertion approaches.

Conclusion: Sequencing results looked well: The HSPG-KO ViralBrick was cloned successfully into VP2/3.

Cloning of pBAD_Affibody_middlelinker_EGFP_His and pSB1C3_Affibody_middlelinker_EGFP_His

Investigator: Jessica
Comment: There was a mistake in cloning pSB1C3_Affibody_middlelinker_EGFP_His so there is just pSB1C3_EGFP_His. in this plasmid will be cloned Affibody_middlelinker, also in pBAD_EGFP_His

Vector: name: pBAD_EGFP_His P588
Vector: name: pSB1C3_EGFP_His P565
Insert: name: pSB1C3_ZEGFR:1907_middlelinker_ P290
new vector name: pBAD_ZEGFR:1907_middlelinker_EGFP_His P
new vector name: pSb1C3_ZEGFR:1907_middlelinker_EGFP_His P
buffer used: 4
DNA concentration (vector): 71,0 ng/µl / 252,7 ng/µl; DNA concentration (insert): 227,4 µg/µl

components	volume of pBAD_EGFP_His /µl	volume of pSB1C3_EGFP_His /µl	volume of pSB1C3_ZEGFR:1907_middlelinker /µl
DNA	15	4	7
BSA (10x)	2	2	2
Buffer 4 (10x)	2	2	2
Enzyme XbaI	0,8	0,8	0,8
Enzyme AgeI	-	-	0,8
Enzyme NgoMIV	0,8	0,8	-
H2O	-	10,4	7,4
Total volume (e.g. 15,20,25,30 µl)	20,6	20	20

0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 120 Volt

	Marker	P290, 20µl	P565, 20µl	P588, 20µl
Sample	4	1	2	3
Fragment size		210 bp	2800 bp	4700 bp

Gel extraction:

	pBAD	pSB1C3	Affibody_middlelinker
DNA-concentration [ng/µl]

T4 Ligation pBAD:
Volume vector: 3,5 µl
Volume insert: 4,5 µl

T4 Ligation pSB1C3:
Volume vector: 2,3 µl
Volume insert: 5,7 µl

131. labday 26.09.2010

Continuation of cloning of pBAD_Affibody_middlelinker_EGFP_His and pSB1C3_Affibody_middlelinker_EGFP_His

Transformation:

BL21 cells were used - in 37°C at 8.30am

pBAD_Affibody_middlelinker_EGFP_His
pSB1C3_Affibody_middlelinker_EGFP_His

Comment:pSB1C3_Affibody_middlelinker_EGFP_His was not successful (no colonies on plate), will be repeated on monday

Picking clones of different constructs

Investigator: Anna

Clones were picked of:

pBad_Affibody_middlelinker_EGFP_His
pSB1C3_001_RC_InsRepCap_KpnIback_RFC10
Darpin (ReTrafo)
pSB1C3_453_BAP (p402, ReTrafo)
pSB1C3_587_KO_RGD (p390, ReTrafo)
pSB1C3_587_KO_His (p391, ReTrafo)

In addition, preparations for Mini-Preps of several ViralBricks were done:

B289: 587_BAP
B270: 587_KO_BAP
B271: 587_RGD
B272: 453_His
B273: 587_His
B274: 587_KO_empty
B488: 453_Z34C

Comment: Inoculating of 10 mL DYT medium containing 10µL chloramphenicol (except pBad with Amp).
There were no clones on the plate with pSB1C3_Affibody_middlelinker_EGFP_His.

Continuation of cloning of 453 and 587 inserts into pSB1C3_CMV_VP123_capins

Investigator: Achim, Anna

Transformation:

Trafo was performed according to the standard protocol using XL1b cells. The cells were plated on agar plates containing chlorampenicol and stored in the 37°C room.

Colony PCR of remaining 587 constructs

Investigator: Achim, Anna

Comment: New clones of the remaining 587 constructs were picked (from new cloning approach with T4 Ligation and dephosphorylated vector, see labdays 15.09. and 22.09.).

Constructs:

12: 587_Z34C
13: 587_KO_Z34C
14: 587_Z34C_KO_Spacer

Components	Volume /µl
10x Standard Taq Buffer (with MgCl2)	1
MgCl2 (50mM)	0,1
dNTPs	0,2
Primer 1: RFC25 for	0,2
Primer 2: RFC25 rev	0,2
Taq Polymerase	0,05
H2O	8,25
Total volume	10

Cycles	Temperature	Time
	95°C	6 min
30x	95°C	25 sec
(Tm -3°C)	60°C	30 sec
1 min/kb	68°C	55 sec
1x	68°C	5 min
Hold 4°C

Clone 13.3, 14.1 and 14.3 will be sent for sequencing.

Sequencing results: pCerulean_Zegfr:1907_VP2/3

Investigator: Hanna

Sequencing results revealed that VP2/3 (unmodified!) was successfully fused to the Affibody (without linker).
Next step: Fusion of VP2/3-HSPG-KO to the C-terminus of the Affibody.

N-terminal VP2-Fusion & VP1 Insertion: Fusion of VP2/3_HSPG-KO

Investigator: Hanna

Comment: In order to target tumor cells with our AAV2 two VP2 fusion strategies were figuered out: The so called VP2-fusion and VP1 insertions. These approaches were successfully cloned and are now tested in cell culture. In order to prevent targeting of other (healthy) cells, the natural tropism of the virus needs to be knocked down. For this purpose a ViralBrick, "587-KO_empty", was designed and cloned into pSB1C3_001_VP2/3_Capins.
Today this VP2/3_HSPG-KO sequence will be fused to the N-terminus of the Affibody, CFP/mVenus and His-Tag of both, the N-terminal fusion to VP2 and the VP1 insertion, approach.

DIGESTION:

1. pCerulean_CFP_MiddleLinker (P407)
2. pCerulean_Z_EGFR:1907_MiddleLinker (P408)
3. pCerulean_Z_EGFR:1907_SEG (P409)
4. pCerulean_Z_EGFR:1907_ShortLinker (P410)
5. pCerulean_Z_EGFR:1907_LongLinker (P412)
6. pCerulean_6xHis_MiddleLinker (P374)
7. pCerulean_VP1up_NLS_Z_EGFR:1907 (P422)
8. pCerulean_VP1up_NLS_6xHis (P424)
9. pCerulean_VP1up_NLS_mVenus (P426)
10.1 pSB1C3_001_Vp2/3_HSPG-KO (P579)
10.2 pSB1C3_001_Vp2/3_HSPG-KO (P579)

Incubation: 2 hours, 37°C.
Agarose gel: 0.8%

Sample	Sample/µl]	Loading dye (6x)/µl	Expected size
1	20 µl	4 µl	4710 bp
2	20 µl	4 µl	4169 bp
3	20 µl	4 µl	4254 bp
4	20 µl	4 µl	4158 bp
5	20 µl	4 µl	4181 bp
6	20 µl	4 µl	2129 bp
7	20 µl	4 µl	4583 bp
8	20 µl	4 µl	4428 bp
9	20 µl	4 µl	5124 bp
10.1	20 µl	4 µl	1937 bp
10.2	20 µl	4 µl	1937 bp

Marker: GeneRuler ladder mix

	Marker /µL	Sample 1 /µl	Sample 2 /µl	Sample 3 /µl	Sample 4 /µl	Sample 5 /µl	Sample 6 /µl	Sample 7 /µl	Sample 8 /µl	Sample 9 /µl	Sample 10.1 /µl	Sample 10.2 /µl
Lane	4.5	24	24	24	24	24	24	24	24	24	36	36

LIGATION:

TRAFO:
Trafo was performed following our standard protocol. Cells: XL1b, DNA: 2µL.
Plates will be stored over night @ the 37°C room.

Next step: Picking 2 clones of each construct, colony PCR!

132. labday 27.09.2010

Sent for sequencing

Investigator: Jessica

P591 pSB1C3_email: VR2
P583 pSB1C3_P40: VR2
P588 pBAD_EGFP_His: pBAD-FP
P596 pBAD_Affibody_middlelinker_EGFP_His: pBAD-FP / pTrcHis-RP

Picking clones of VP1 insertion and VP2 fusion HSPG-KO approaches

Investigator: Hanna
2 clones were picked of each ligation approach = 18 falcons (Kanamycin).

To do: Mini-Prep and test digestion - sequencing.

MiniPreps of different constructs

Investigator: Anna

The following constructs were prepped according to the standard protocol:

pSB1C3_453_BAP (p402, ReTrafo)
pSB1C3_587_KO_RGD (p390, ReTrafo)
pSB1C3_587_KO_His (p391, ReTrafo)
B289: 587_BAP
B290: 453_RGD
B270: 587_KO_BAP
B271: 587_RGD
B272: 453_His
B273: 587_His
B274: 587_KO_empty
B488: 453_Z34C

B473:

Miniprep of serveral constructs

Investigator: Stefan

Glycerol stocks were prepared:

B489 = pSB1C3_001_RC_InsRepCap_KpnIback_RFC10 clone 1
B490 = pSB1C3_001_RC_InsRepCap_KpnIback_RFC10 clone 2
B491 = pBAD_Affibody_middlelinker_EGFP_His clone 1
B492 = pBAD_Affibody_middlelinker_EGFP_His clone 2
B493 = pBAD_Affibody_middlelinker_EGFP_His clone 3

Mini-Prep was performed according to the standard protocol

P594= pSB1C3_001_RC_InsRepCap_KpnIback_RFC10 clone 1 c= 140,9 ng/µl
P595 = pSB1C3_001_RC_InsRepCap_KpnIback_RFC10 clone 2 c= 117,5 ng/µl
P596 = pBAD_Affibody_middlelinker_EGFP_His clone 1 c= 101,4 ng/µl
P597 = pBAD_Affibody_middlelinker_EGFP_His clone 2 c= 92,9 ng/µl
P598 = pBAD_Affibody_middlelinker_EGFP_His clone 3 c= 92,1 ng/µl

Test digestion:

Components	Volume P594+P595 /µl	Volume P596-598 /µl
DNA	2,5	2,5\|
BSA	1	1
Buffer 4 (10x)	1	1
XbaI	0,4	0,4
PstI	0,4	0,4
H₂O	4,7	4,7
Total volume	10	10

Comment:

Re-Trafo of pSB1C3_pTAV (P5)

Investigator: Stefan

Comment:After inocculating from glycerol-stock, the plasmid showed strange results during digestion. Therefore a re-trafo will have to be performed to replace the stock.

Repetition: Cloning of P5_TATAless downstream of pSB1C3_001_RC_insrepcap_KpnI_back and P5 upstream of pSB1C3_001_RC_insrepcap_KpnI_back

Investigator: Stefan
Digestion of the constructs:

P594 = pSB1C3_001_RC_insrepcap_KpnI_back c=344,5 ng/µl
P594 = pSB1C3_001_RC_insrepcap_KpnI_back c=344,5 ng/µl
P586 = pSB1C3_pTAV2 (P5)clone 1 c=137,37 ng/µl
P587 = pSB1C3_pAAV_RC (P5TATAless)clone 3 c=191,61 ng/µl

Components	V P594up /µL	VP586up /µL	V P594down /µL	V P587down /µL
DNA	10	14	10	13
BSA (10x)	2	2	2	2
Buffer no. 4 (10x)	2	2	2	2
Enzyme 1	XbaI 1	SpeI 1	SpeI 1	XbaI 1
Enzyme 2	EcoRI 1	EcoRI 1	PstI 1	PstI 1
H₂O	9,5	9,5	-	3
Total volume	20	20	20	20

Results:

Comment:P5 and P5TATAless do not fit the expected results. For P5TATAless, a new digestion using the P184 plasmid was performed. For P5 no old plasmid stock was available, therefore a re-trafo will have to be performed.

Components	V P184down /µL
DNA	10
BSA (10x)	2
Buffer no. 4 (10x)	2
XbaI	1
PstI	1
H₂O	4
Total volume	20

Comment:No gel picture available because computer crashed completely...

Gel-Extraction:
Gel-Ex was performed according to protocol. The following concentrations were measured:

594down c= 29,9 ng/µl
184down c= 3,8 ng/µl

Ligation:
The following DNA mixes were used for ligation:

432down V= 4,48 µl
184down V= 3,52 µl

Transformation:
The transformation was performed according to standard protocol using BL21 cells. They were plated on agar plates containing chloramphenicol and stored in 37°C room overnight.

Picking clones of VP1 insertion and VP2 fusion HSPG-KO approaches

Investigator: Hanna
2 clones were picked of each ligation approach = 18 falcons (Kanamycin).

To do: Mini-Prep and test digestion - sequencing.

Picking clones of VP1 insertion and VP2 fusion HSPG-KO approaches

Investigator: Hanna
2 clones were picked of each ligation approach = 18 falcons (Kanamycin).

To do: Mini-Prep and test digestion - sequencing.

133. labday 28.09.2010

Test digestion: ViralBricks in pSB1C3_CMV_VP123_capins

Investigator: Achim

We digested preps of all our 453 Inserts with BamHI & SspI and all our 587 Inserts with SalI and PvuII. That way we get bands of ~50 bp difference between our loop inserts and the wt loop region. (Eg. 453 BAP: 455 with insert, 396 without insert.

Nomenclature as in previous VB assays.

Clone 11.2 is missing , I forgot to inoculate it.

P580 (pSB1C3_CMV_VP123_capins)

The framed samples were midiprepped and will be used for transfection

Sequencing result of pSB1C3_email and pBAD_Affibody_middlelinker_EGFP_His

Investigator: Jessica
1. pSB1C3_email:

2. pBAD_Affibody_middlelinker_EGFP_His:

Preparation of PBS Buffer and PBS Buffer with Imidazole

Investigator: Jessica

The following protocol was used:

dissolve the following in 800ml ddH₂O:
- 8g of NaCl
- 0.2g of KCl
- 1.44g of Na₂HP0₄ (1.69 because of the crystal water in the reagent)
- 0.24 g of KH₂PO₄
adjust to pH 7.4
adjust to 1000ml
steril filtrate the solution

dissolve the following in 180ml ddH₂O:
- 6,4g of NaCl
- 0,16g of KCl
- 1,15g of Na₂HP0₄ (1.69 because of the crystal water in the reagent)
- 0,19 g of KH₂PO₄
- 3,4g of Imidazole
adjust to pH 7.4
adjust to 200ml
steril filtrate the solution

ViralBrick Sequencing results: pSB1C3_587_KO_Z34C and pSB1C3_587_KO_Z34C_Spacer

Investigator: Achim

Sequencing showed that the PCR reaction we designed to remove the mutations in the z34c insert were successful! Both pSB1C3_587_KO_Z34C and pSB1C3_587_KO_Z34C_Spacer are correct. We hadn't sent the 587_Z34C for sequencing because the colony PCR hadn't shown any bands. But because this construct is less important for cell culuture, we won't continue working on this construct.

Cloning of Darpin into pCerulean_Vp1up_NLS and pSB1C3

Investigator: Achim

The Darpin needs to be cloned into pSB1C3 for submission to the parts registry as well as into pCerulean for expression.

Darpin ( cut with NgOMIV & SpeI
Vectors cut with AgeI & SpeI

- -> Results in fusion protein

Cloning of pSB1C3_001_CMV and pSB1C3_001_Vp2/3_HSPG-Ko_CMV_ZEGFR:1907

Investigator: Anissa
Comment: By working with three-fragment-ligation, CMV and ZEGFR:1907 will each be cut out of pSB1C3, will be ligated together and into the vector pSB1C3_001_Vp2/3_HSPG-Ko. Additionally, CMV will be cloned freom pSB1C3 into pSB1C3_001

Vector: name:pSB1C3_001_Vp2/3_HSPG-Ko P613 c=273,6 ng/µl
Vector: name: pSB1C3_001_bla P320 c=408 ng/µl
Insert: name: pSB1C3_CMV P146 c=155,6 ng/µl
Insert: name: pSB1C3_ZEGFR:1907 P268 c=162,5 ng/µl
new vector name: pSB1C3_001_CMV
new vector name: pSB1C3_001_Vp2/3_HSPG-Ko_CMV_ZEGFR:1907
buffer used: 4

components	pSB1C3_CMV /µl	pSB1C3_ZEGFR:1907 /µl	volume of pSB1C3_001_bla /µl	volume of pSB1C3_001_Vp2/3_HSPG-Ko/µl
DNA	12,7	12,3	3,6	5,5
BSA (10x)	2	2	1,5	1,5
Buffer 4 (10x)	2	2	1,5	1,5
Enzyme SpeI	1	-	1	-
Enzyme EcoRI	1	-	1	1
Enzyme XbaI	-	1	-	-
Enzyme AgeI	-	1	-	-
Enzyme NgoMIV	-	-	-	1
H2O	1,3	1,7	6,4	4,5
Total volume (e.g. 15,20,25,30 µl)	20	20	15	15

0,5 g Agarose, 55 ml TAE (1%), 1,5 µl GELRED , at 115Volt

	Marker	P146, 20µl	P268, 20µl	P320, 20µl	P613, 20µl
Fragment size	-	650 bp	170 bp	2100 bp	4000 bp

Gel extraction:

	pSB1C3_CMV (p146)	pSB1C3_ZEGFR:1907 (p268)	pSB1C3_001_bla (p320)	pSB1C3_001_Vp2/3_HSPG-Ko (p613)
DNA-concentration [ng/µl]	28,2	13,2	22,1	43,2

T4 Ligation pSB1C3_001_CMV:
Volume vector p320: 4,63 µl
Volume insert p146: 3,37 µl

T4 Ligation pSB1C3_001_Vp2/3_HSPG-Ko_CMV_ZEGFR:1907:
Volume vector p613: 2,9 µl
Volume insert p268: 3 µl
Volume insert p146: 3 µl

Transformation:
Was performed in BL21 according the standard protocol

CD assembly with new suffix primer

Investigator: Kira

PCR program:

components	volume in µl	volume in µl
5x Phusion HF buffer	10	10
10 mM dNTP mix	1	1
0158 primer_for (1:10 dilution)	2,5	2,5
0159 primer_rev (1:10 dilution)	2,5	2,5
DNA template (1:100)	0,5	0,5
DMSO	0	0.5
Phusion polymerase	0,5	0,5
H₂O	33	32,5
Total volume (e.g. 50 µl)	50	50

Cycles	Temperature	Time
	98°C	1
10x	98°C	15"
	60°C	25"
	72°C	40"
20x	98°C	15"
	65°C	25"
	72°C	40"
1x	72°C	5'
Hold 4°C

Digestion of plasmid backbone:

c (pSB1C3) = 151, 1 ng/ µl

Components	vector Volume/µL
DNA 1 µg	6,0 µl
BSA (10x)	2 µl
Buffer no. 4 (10x)	2,0 µl
Enzyme 1 XbaI	1,0 µl
Enzyme 2 AgeI	1,5 µl
H₂O	7,5 µl
Total volume	20

incubation @ 37 C for approx. 2 h

1% agarose gel

File:Freiburg10 Vektorverdau 2010 09 28.jpg

Digestion of PCR product:

Components	PCR product Volume/µL
DNA	30,0 µl
BSA (100x)	0,4 µl
Buffer no. 4	4,0 µl
Enzyme 1 XbaI	1,5 µl
Enzyme 2 AgeI	2,0 µl
H₂O	2,1 µl
Total volume	40

incubation @ 37 C for approx. 2 h

Cloning of pSB1C3_Affibody_middlelinker_EGFP_His

Investigator: Jessica
Comment: There was a mistake in cloning pSB1C3_Affibody_middlelinker_EGFP_His so there is just pSB1C3_EGFP_His. in this plasmid will be cloned Affibody_middlelinker_EGFP_His

Vector: name: pSB1C3_EGFP_His P565
Insert: name: pBAD_Affibody_middlelinker_EGFP_His P596
new vector name: pSb1C3_ZEGFR:1907_middlelinker_EGFP_His P
buffer used: 4
DNA concentration (vector): 252,7 ng/µl; DNA concentration (insert): 101,4 µg/µl

components	volume of pBAD /µl	volume of pSB1C3 /µl
DNA	15	4
BSA (10x)	2	2
Buffer 4 (10x)	2	2
Enzyme XbaI	0,8	0,8
Enzyme AgeI	0,8	0,8
H2O	-	10,4
Total volume (e.g. 15,20,25,30 µl)	20,6	20

0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 120 Volt

	Marker	P565, 20µl	P596, 20µl
Sample
Fragment size		2100 bp	1000 bp

Gel extraction:

	pSB1C3	Affibody_middlelinker_EFGP_His
DNA-concentration [ng/µl]	17,5	14,2

T4 Ligation:
Volume vector: 2,9 µl
Volume insert: 5,1 µl

Transformation:

BL21 cells were used

Sequencing analysis of pSB1C3_001_RC_IRCK, pSB1C3_001_RC_IRCK_VP1-ko_P5tataless and pSB1C3_001_RC_IRCK_VP2-ko_P5tataless

Investigator: Stefan

Because all these constructs were cloned via PCR out of the pAAV vector, a complete sequencing was performed:

P548 pSB1C3_001_RC_InsRepCap_KpnIback_VP1-ko clone 1:
Sequence could be verified, can be used for further cloning steps!

P568 pSB1C3_001_RC_InsRepCap_KpnIback_VP2-KO clone 2:
Sequence could be verified, can be used for further cloning steps!

P594 pSB1C3_001_RC_InsRepCap_KpnIback_RFC10 clone 1:
Sequence could be verified, can be used for further cloning steps!

Cloning of HSPG_KO_empty into pSB1C3_001_RC_IRCK_VP1-ko_P5tataless and pSB1C3_001_RC_IRCK_VP2-ko_P5tataless

Investigator: Stefan

Vector name:

pSB1C3_001_RC_IRCK_VP1-ko_P5tataless (P548)
pSB1C3_001_RC_IRCK_VP1-ko_P5tataless (P568)

Insert name:

VB:pSB1C3_001_KO_empty(P611)

components	volume of P548 /µl	volume of P568 /µl	volume of P611 /µl
DNA	3,5	3,5	16
BSA (10x)	2	2	3
Buffer 4 (10x)	2	2	3
Enzyme BamHI	1	1	1
Enzyme PvuII	1	1	1
H2O	10,5	10,5	6
Total volume (e.g. 15,20,25,30 µl)	20	20	30

Gel:
for vector:
0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 115 Volt

for insert:
1 g Agarose, 50 ml TAE (2%), 3 µl GELRED , at 105 Volt

File:New

will be uploaded tomorrow

Gel extraction:
Was performed according to protocol.

T4 Ligation:

VP1-ko:

Volume VP1-ko: 5,57 µl
Volume insert: 2,43 µl

VP2-ko

Volume VP2-ko: 5,04 µl
Volume insert: 2,96 µl

Transformation:

Cloning of 587_KO_Z34C and 587_KO_Z34C_Spacer into pSB1C3_001_CMV_VP123_capins

Investigator: Anna

Comment: Todays sequencing results of 587_KO_Z34C and 587_KO_Z34C_Spacer looked well, so they will be cloned into pSB1C3_CMV_VP123_capins. Finally produced ViralBricks:

media:Freiburg10_Production of ViralBricks_End version.pdf

Vector name: pSB1C3_CMV_VP123_capins P580
Insert name:

1. pSB1C3_587_KO_Z34C P599
2. pSB1C3_587_KO_Z34C_Spacer P600

buffer used: 4

DNA concentration (P580): 377,29 ng/µl;
DNA concentration (P599): 102,5 µg/µl
DNA concentration (P600): 90,4 µg/µl

components	volume of P580 /µl	volume of P599 /µl	volume of P600 /µl
DNA	2,7	14,7	16,7
BSA (10x)	2,5	2,5	2,5
Buffer 4 (10x)	2,5	2,5	2,5
Enzyme BamHI	1	1	1
Enzyme PvuII	1	1	1
H2O	15,3	3,3	1,3
Total volume (e.g. 15,20,25,30 µl)	25	25	25

0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 120 Volt

	Marker, 4 µl	P580	2: P599	3: P600
Construct		pSB1C3_CMV_VP123_cut	587_KO_Z34C	587_KO_Z34C_Spacer
Fragment size		5000 bp	194 bp	209 bp

Gel extraction:
Was performed following the standard protocol.
DNA-concentrations [ng/µl]:

c(vector)= 18,88
c(587_KO_Z34C)= 9,74
c(587_KO_Z34C_Spacer)= 1,72

T4 Ligation:

587_KO_Z34C:
Volume vector: 1,5 µl
Volume insert: 6,5 µl

587_KO_Z34C_Spacer:
Volume vector: 4,6 µl
Volume insert: 3,4 µl

Trafo:
Was performed following the standard protocol using BL21 cells.

Mini-Prep and Test-digestion of VP1 insertion and VP2 fusion HSPG-KO approaches

Investigator: Hanna

134. labday 29.09.2010

Cloning of Darpin into pCerulean_Vp1up_NLS and pSB1C3 Part Two

Investigator: Achim

Cloning of pGGTBT7_Affibody_middlelinker_EGFP_His

Investigator: Jessica
Comment: pBAD is not really working, so we test another expression-plasmid

Vector: name: pGGTBT7_MVenus P627
Insert: name: pBAD_Affibody_middlelinker_EGFP_His 596prepared yesterday
new vector name: pGGTBT7_ZEGFR:1907_middlelinker_EGFP_His P
buffer used: 4
DNA concentration (vector): 144,1 ng/µl; DNA concentration (insert): 101,4 µg/µl

components	volume of pBAD /µl
DNA	10
BSA (10x)	2
Buffer 4 (10x)	2
Enzyme XbaI	0,8
Enzyme AgeI	0,8
H2O	4,4
Total volume (e.g. 15,20,25,30 µl)	20

0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 120 Volt

Fragment size		5200 bp	730 bp

File:Freiburg10 Cloning of PSB1C3 pBad Affibody middlelinker EGFP His4.jpg

Gel extraction:

	pGGTBT7	Affibody_middlelinker_EFGP_His
DNA-concentration [ng/µl]

T4 Ligation:
Volume vector: µl
Volume insert: µl

Transformation:

BL21 cells were used

Cloning of CMV promotor and Affibody into pSB1C3_001_VP2/3_capins and pSB1C3_001_VP2/3_HSPG_KO

Investigator: Anna

Comment: Cloning of CMV promotor and Affibody into pSB1C3_001_VP2/3_HSPG_KO was repeated, because it was not clear if the first attempt worked.

Vector name:

1. pSB1C3_001_VP2/3_capins P514: 318,9 ng/µl
2. pSB1C3_001_VP2/3_HSPG_KO P613: 273,6 ng/µl

Insert name:

1. pSB1C3_CMV P146: 155,6 ng/µl
2. pSB1C3_ZEGFR:1907 P248: 146,5 ng/µl

buffer used: 4

components	volume of P514 /µl	volume of P613 /µl	volume of P146 /µl	volume of P248 /µl
DNA	3,1	3,7	12,8	13,7
BSA (10x)	2,0	2,0	2,0	2,0
Buffer 4 (10x)	2,0	2,0	2,0	2,0
Enzyme I	1	1	1	1
Enzyme II	1	1	1	1
H2O	10,9	10,3	1,2	0,3
Total volume (e.g. 15,20,25,30 µl)	20	20	20	20

0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 120 Volt

	Marker, 4 µl	Vector 1: pSB1C3_001_VP2/3_capins	Vector 2: pSB1C3_001_VP2/3_HSPG_KO	CMV	Affibody
Fragment size		4000 bp	4000 bp	650 bp	170 bp

Gel extraction:
Was performed following the standard protocol.
DNA-concentrations [ng/µl]:

c (pSB1C3_001_VP2/3_capins) =
c (pSB1C3_001_VP2/3_HSPG_KO)=
c (CMV)=
c (Affibody)=

T4 Ligation:

Vector 1 + CMV + Affibody:

Volume vector: 1,5 µl
Volume insert: 6,5 µl

Vector 2 + CMV + Affibody:

Volume vector: 4,6 µl
Volume insert: 3,4 µl

Trafo:
Was performed following the standard protocol using BL21 cells.

Cloning of CFP into pSB1C3_lITR_phTERT_beta-globin

Investigator: Anissa

Vector name:

pSB1C3_lITR_phTERT_beta-globin P514: 333,46 ng/µl

Insert name:

pSB1C3_CFP P146: 151,1 ng/µl

buffer used: 4

components	volume of P51.2 /µl	volume of P437 /µl
DNA	13,2	4,5
BSA (10x)	2,0	1,5
Buffer 4 (10x)	2,0	1,5
Enzyme I	XbaI 1	SpeI 1
Enzyme II	PstI 1	PstI 1
H2O	0,8	5,5
Total volume (e.g. 15,20,25,30 µl)	20	15

0,5 g Agarose, 50 ml TAE (1%), 1,5 µl GELRED , at 115 Volt

	Marker, 4 µl	Vector	Insert
Fragment size		3180 bp	750 bp

Gel extraction:
Was performed following the standard protocol.
DNA-concentrations [ng/µl]:

c (pSB1C3_CFP) = 11,6
c (pSB1C3_lITR_phTERT_beta-globin)= 24,8

T4 Ligation:

Volume vector: 3,2 µl
Volume insert: 4,8 µl

Trafo:
Was performed following the standard protocol using BL21 cells.

Team:Freiburg Bioware/NoteBook/Labjournal/September2

From 2010.igem.org

Contents

September

124. labday 19.09.2010

Continuation with Colony-PCR of pSB1C3_CD and ViralBrick motif Z34C

Testtransduction of the final modified capsid coding constructs

Miniprep of serveral constructs

125. labday 20.09.2010

Picking the clones and preparing the over-night culture

Minipreps and Sequencing of ViralBrick clones

Cloning of pCerulean_Affibody_VP2/3 and pSB1C3_Affibody_middlelinker_GFP_his

Cloning of P5_TATAless downstream of pSB1C3_001_RC_insrepcap_KpnI_back and P5 upstream of pSB1C3_001_RC_insrepcap_KpnI_back

Test digestion of VP2-N-terminal fusion constructs

BioBrick production: PCR of pAAV_RC_InsRepCap_KpnIback_VP1-ko and VP2-ko

2x repetition of CD biobrick

126. labday 21.09.2010

Trafo evalutation of CD biobrick plate

Continuation of cloning of pCerulean_Affibody_VP2/3 and pSB1C3_Affibody_middlelinker_GFP_his

Sequencing result of pSB1C3_EGFP_His upper and (!) lower band

Midi-Prep of pHelper & pSB1C3_leftITR_CMV_beta-globin_mVenus_hGH_rightITR

New aliquots (60µl) of XL1blue can be used ! (Jessica)

127. labday 22.09.2010

Sequencing results of ViralBrick ligations using dephosphorylated vector

Cloning pSB1C3_Viral Brick 587KO-empty (B274/P542) into pSB1C3_VP2/3_Capins (B438/P514)

Cellculture: Serum-free cells

PCR of P40

Mini-Prep and test digestion of pSB1C3_001_RC_InsRepCap_KpnIback_VP1-ko

Cloning of CMV promotor into pSB1C3_VP123_inscap

Sequencing of Zegfr:1907-Linker Library, His-Tag and imaging appoaches

Mass Midi-Prep

RNA isolation and cDNA synthesis

cDNA synthesis

128. labday 23.09.2010

PCR of VB constructs to remove mutations

Colony PCR of new clones from the last ligations

Contuniation: Cloning pSB1C3_Viral Brick 587KO-empty (B274/P542) into pSB1C3_VP2/3_Capins (B438/P514)

Mini-Prep and test digestion of pCerulean_Affibody_VP2/3, pSB1C3_Affibody_middlelinker_EGFP_His, pSB1C3_001_RC_InsRepCap_KpnIback_VP2-ko

PCR for 587 Z34C ViralBricks

PCR of Vp1_ex, Vp2_ex and Vp3_ex and cloning into pSB1C3_001

RNA Purity Gel

hTERT PCR Reaction

Cloning of pBAD_Affibody_middlelinker_EGFP_His

Picking clones of pSB1C3_CMV_VP123_inscap

Cloning of ***** into pSB1C3_CFP

Repetition: Cloning of P5_TATAless downstream of pSB1C3_001_RC_insrepcap_KpnI_back and P5 upstream of pSB1C3_001_RC_insrepcap_KpnI_back

129. labday 24.09.2010

Sequencing results of VB 13.4

Contuniation: Cloning pSB1C3_Viral Brick 587KO-empty (B274/P542) into pSB1C3_001_VP2/3_Capins (B438/P514)

Sequencing evaluation of VP2/3_Gsat-linker and VP2/3_cap_Gsat-linker

New CD primer ordered

Sequencing of pCerulean_Zegfr:1907_VP2/3

Repetition: PCR for biobrick production: Cloning RepCap into pSB1C3

Picking clones of pSB1C3_CFP_email

MiniPreps and Test digestion of pSB1C3_CMV_VP123_capins

MiniPreps of 587 Z34C ViralBricks and pSB1C3_p40

Re-Trafo of DARPin

130. labday 25.09.2010

Sequencing of VB: 13.1, 13.4 (approach w. dephosphorylated vector, second clone picking round

Miniprep of serveral constructs

Sequencing results of pSb1C3_Affibody_middlelinker_EGFP_His

Sequencing result of pSB1C3_CMV_VP123_capins_clone1

Cloning of 453 and 587 ViralBricks into pSB1C3_CMV_VP123_capins

Sequencing results: pSB1C3_001_VP2/3_HSPG-KO

Cloning of pBAD_Affibody_middlelinker_EGFP_His and pSB1C3_Affibody_middlelinker_EGFP_His

131. labday 26.09.2010

Continuation of cloning of pBAD_Affibody_middlelinker_EGFP_His and pSB1C3_Affibody_middlelinker_EGFP_His

Picking clones of different constructs

Continuation of cloning of 453 and 587 inserts into pSB1C3_CMV_VP123_capins

Colony PCR of remaining 587 constructs

Sequencing results: pCerulean_Zegfr:1907_VP2/3

N-terminal VP2-Fusion & VP1 Insertion: Fusion of VP2/3_HSPG-KO

132. labday 27.09.2010

Sent for sequencing

Picking clones of VP1 insertion and VP2 fusion HSPG-KO approaches

MiniPreps of different constructs

Miniprep of serveral constructs

Re-Trafo of pSB1C3_pTAV (P5)

Repetition: Cloning of P5_TATAless downstream of pSB1C3_001_RC_insrepcap_KpnI_back and P5 upstream of pSB1C3_001_RC_insrepcap_KpnI_back

Picking clones of VP1 insertion and VP2 fusion HSPG-KO approaches

Cloning of * into pSB1C3_CFP