From 2010.igem.org

Revision as of 18:58, 8 July 2010 by Anthony.vuong (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

[http://2010.igem.org/wiki/index.php?title=Team:Lethbridge&Home ]	[http://2010.igem.org/Team:Lethbridge/Team ]	[http://2010.igem.org/Team:Lethbridge/Project ]	[http://2010.igem.org/Team:Lethbridge/Notebook ]	[http://2010.igem.org/Team:Lethbridge/Parts ]	[http://2010.igem.org/Team:Lethbridge/Modeling ]	[http://2010.igem.org/Team:Lethbridge/Ethics ]	[http://2010.igem.org/Team:Lethbridge/Safety ]

Back to Notebook
Back to Lab Work

June 2010

June 1/2010

JV quantified the amount of DNA in gels run to date using ImageJ software. Results to be posted in working plasmids box.

Objective: Transform plasmids into DH5α
Method: Follow competent cell transformation protocol to transform the following:
From our ligations:

pLacI-sRBS-Lumazine-dT
pLacI-sRBS-Lumazine-dT
mms6 (A6)
mms6 (B6)
xylE (C4)
xylE (B4)

From the 2010 Parts Distribution:

ECFP (Bba_E0020)
EYFP (Bba_E0030)
BglII Endonuclease (Bba_K112106)

June 2/2010

(In Lab: JV)

Objective: Isolate plasmid DNA of RBS-xylE (BBa_J33204) from DH5α cells and confirm results.

Method: "Mini-prep" the plasmid DNA using boiling lysis miniprep. Then restrict the DNA once and run on a 1% agarose gel (TAE).

Restriction Reaction

Ingredient	Volume(µL)
MilliQ H₂0 Water	15.75
Orange Buffer (10x)	2
pDNA (rbs-xylE)	2
EcoRI	0.25

Unrestricted Control

Ingredient	Volume(µL)
MilliQ H₂0 Water	16
Orange Buffer (10x)	2
pDNA (rbs-xylE)	2

DNA was restricted for 80 minutes at 37^oC.

Analyzed results on a 1% agarose gel. Load order as follows:

Lane	Sample	Volume Sample (µL)	Volume Loading Dye (µL)
1	Restricted RBS-xylE	10	2
1	Unestricted RBS-xylE^†	1	2
1	1kb Ladder^†^†	2	2

† Added 9µL MilliQ H₂O
†† Added 8µL MilliQ H₂O
Ran gel at 100V from 2 hours.
Results:

Conclusions: Plasmid DNA prep and restriction was successful.

Objective: Ligate rbs-xylE (Bba_J33204) to our double terminator, and insert it into the pSB1T3 plasmid backbone.
Method:

Restrictions
- Restrict rbs-xylE wit EcoRI and SpeI (Red Buffer)
- Restrict the double terminator with XbaI and PstI (Tango Buffer)
- Restrict pSB1T3 with EcoRI and PstI (Red Buffer)
Set up reactions as follows:

Component Volume (µL)

MilliQ H₂O 15.5

Buffer 2

pDNA 2

Enzyme 0.25 + 0.25

Set up control reaction as follows:
- MilliQ H₂O - 16µL
- Buffer - 2µL
- pDNA - 2µL
Incubated reactions for 65 minutes at 37^oC
Killed enzymes by incubating reactions for 10 minutes at 65^oC

Ligation
Reaction set up as follows:

T4 DNA ligase - 0.25µL
rbs-xylE - 5µL
dT - 3µL
pSB1T3 - 8µL
10x Ligation Buffer - 2µL
MilliQ H₂O - 1.75µL

Incubated reactions overnight at room temperature (total of 19.5 hours)
Killed enzymes by incubating reactions for 10 minutes at 80^oC</ul>

June 2/2010 - Evening

Objective: Set up new ligations of pLacI and sRBS-Lum-dT according to Tom Knight's protocol. Previous ligation had very little DNA.
Relevant Information:

Want a final mass of 25ng of each pDNA in the ligation mix.
Final concentration of pDNA in restriction digest should be 25-50ng/µL.
Tom Knight's restriction reaction is 50µL, therefore there should be 1000ng pDNA in each restriction digest.
Identified the following plasmids in our working plasmids box:

Common Name	Location	Concentration (ng/µL)	Volume/rxn (µL)
pLacI Maxiprep	A9	990	~1
pLacI (B1)	A6	440	~2
sRBS-Lum-dT (2)	A1	965	~1
sRBS-Lum-dT (1)	A2	1145	~1
sRBS-Lum-dT Maxiprep	B8	4780	~.2
sRBS-Lum-dT	B7	4375	~.25
sRBS-Lum-dT (1)	G2	335	~3
sRBS-Lum-dT (2)	G3	965	~2

Make a 1:10 dilution of sRBS-Lum-dt maxiprep (D8) and sRBS-Lum-dT (B7). 0.5µL pDNA in 4.5µL water.
Cut pLacI with EcoRI and SpeI
Cut sRBS-Lum-dT with XbaI and PstI
Cut pSB1T3 with EcoRI and PstI
Will have total of 12 ligation reactions, want 12x2µL of pSB1T3 to add to each, therefore want 25µL of pSB1T3.

Method:
Restriction

Name	[pDNA] (ng/µL)	Volume pDNA (µL)	Volume Water (µL)	Volume Buffer (µL)	Enzymes	Total Volume
sRBS-Lum-dT (A1)	965	1	43.5	5	0.25µL XbaI 0.25µL PstI	50
sRBS-Lum-dT (A2)	1145	1	43.5	5	0.25µL XbaI 0.25µL PstI	50
pLacI Maxiprep (A1)	990	1	43.5	5	0.25µL EcoRI 0.25µL SpeI	50
sRBS-Lum-dT Maxiprep(B8)	4780	2 (of 1:10 dilution)	42.5	5	0.25µL XbaI 0.25µL PstI	50
sRBS-Lum-dT (B7)	4375	2.5 (of 1:10 dilution)	42	5	0.25µL XbaI 0.25µL PstI	50
pLacI (D6)	440	2	42.5	5	0.25µL EcoRI 0.25µL SpeI	50
sRBS-Lum-dT (G2)	335	3	41.5	5	0.25µL XbaI 0.25µL PstI	50
sRBS-Lum-dT (G3)	540	2	42.5	5	0.25µL XbaI 0.25µL PstI	50
pSB1T3	25	12.5	7	5	0.25µL EcoRI 0.25µL PstI	50

Incubate for 30 minutes at 37^oC (Start- 12:10pm; End- 12:40pm)
Heat kill enzymes at 80^oC for 20 minutes

Ligation:
In a 10µL final volume, add:

2µL of sRBS-Lum-dT component
2µL of pLacI component
2µL of pSB1T3 component
1µL of T4 Buffer
0.25µL of T4 DNA Ligase
2.75µL of MilliQ H₂O

Incubate for 30 minutes at room temperature to ligate
Incubate for 20 minutes at 80^oC to heat kill

June 3/2010

Carried out protocol described in June 2/2010 - Evening
Analyzed results on 1% agarose gel.Load order as follows:

Lane	Gel 1 Sample	Gel 1 Load	Gel 2 Sample	Gel 2 Load
1	1kb Ladder	2µL dye, 2µL ladder 8µL MilliQ H₂O	1kb Ladder	2µL dye, 2µL ladder 8µL MilliQ H₂O
2	Restricted sRBS-Lum-dT (A1)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(A9)+sRBS-Lum-dT(A1)	10µL DNA 2µL Dye
3	Unrestricted sRBS-Lum-dT (A1)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(D6)+sRBS-Lum-dT(A1)	10µL DNA 2µL Dye
4	Restricted sRBS-Lum-dT (A2)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(A9)+sRBS-Lum-dT(A2)	10µL DNA 2µL Dye
5	Unrestricted sRBS-Lum-dT (A2)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(D6)+sRBS-Lum-dT(A2)	10µL DNA 2µL Dye
6	Restricted sRBS-Lum-dT (B8)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(A9)+sRBS-Lum-dT(B7)	10µL DNA 2µL Dye
7	Unrestricted sRBS-Lum-dT (B8)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(D6)+sRBS-Lum-dT(B7)	10µL DNA 2µL Dye
8	Restricted sRBS-Lum-dT (B7)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(A9)+sRBS-Lum-dT(G2)	10µL DNA 2µL Dye
9	Unrestricted sRBS-Lum-dT (B7)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(D6)+sRBS-Lum-dT(G2)	10µL DNA 2µL Dye
10	Restricted sRBS-Lum-dT (G2)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(D6)+sRBS-Lum-dT(G3)	10µL DNA 2µL Dye
11	Unrestricted sRBS-Lum-dT (G2)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(A9)+sRBS-Lum-dT(G3)	10µL DNA 2µL Dye
12	Restricted sRBS-Lum-dT (G3)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(D6)+sRBS-Lum-dT(B8)	10µL DNA 2µL Dye
13	Unrestricted sRBS-Lum-dT (G3)	10µL DNA 2µL Dye	pSB1T3 Ligation of: pLacI(A9)+sRBS-Lum-dT(B8)	10µL DNA 2µL Dye
14	Restricted pLacI (A9)	10µL DNA 2µL Dye	Restricted rbs-xylE	10µL DNA 2µL Dye
15	Unrestricted pLacI (A9)	10µL DNA 2µL Dye	Unrestricted rbs-xylE	10µL DNA 2µL Dye
16	Restricted pLacI B1 (D6)	10µL DNA 2µL Dye	Restricted pSB1T3	10µL DNA 2µL Dye
17	Unrestricted pLacI B1 (D6)	10µL DNA 2µL Dye	Unrestricted pSB1T3	10µL DNA 2µL Dye
18	Unrestricted dT	10µL DNA 2µL Dye	pSB1T3 Ligation of: rbs-xylE+dT	10µL DNA 2µL Dye
19	Restricted dT	10µL DNA 2µL Dye

Ran gel at 100V for 90 minutes.
Results:

Conclusions:

June 3/2010 - Evening

Objective: Repeat restriction of pSB1T3 and ligate with pLacI and sRBS-Lum-dT. Previous ligations all used up on gel.
Method:
Ligation:
In a 10µL final volume, add:

2µL of sRBS-Lum-dT component
2µL of pLacI component
2µL of pSB1T3 component
1µL of T4 Buffer
0.25µL of T4 DNA Ligase
2.75µL of MilliQ H₂O

Incubate for 30 minutes at room temperature to ligate
Incubate for 20 minutes at 80^oC to heat kill
Following ligation, transformed using transformation protocol. Plates incubated in 37^oC incubator for 44 hours.
Results: Only plate pLacI (D6) + sRBS-Lum-dT (G2) + pSB1T3 grew; had 2 colonies. Control plate did not grow, acidentally plated on tetracycline plate instead of ampicillin (pUC19).
Follow-up: Inoculated 5mL LB media (tetracycline positive) with cells from the transformation plates and incubated at 37^oC overnight. (June 5/2010).

Objective: Ligate pBad-TetR part with fluorescent protein part in pSB1C3 backbone.
Method:
Restriction

Name	Volume pDNA (µL)	Volume Water (µL)	Volume Buffer (µL)	Enzymes	Total Volume
pSB-NEYFP (B4)	.8	43.7	5	0.25µL XbaI 0.25µL PstI	50
pSB-CEYFP (B5)	.9	43.6	5	0.25µL XbaI 0.25µL PstI	50
pBad-TetR)	.3	44.2	5	0.25µL EcoRI 0.25µL SpeI	50
NEYFP (E1)	4.3	40.7	5	0.25µL XbaI 0.25µL PstI	50
NEYFP (E2)	0.3	42.2	5	0.25µL XbaI 0.25µL PstI	50
Fusion CEYFP (E3)	3.9	40.6	5	0.25µL XbaI 0.25µL PstI	50
Fusion CEYFP (E4)	2.0	42.5	5	0.25µL XbaI 0.25µL PstI	50
Fusion CEYFP (E5)	3.0	41.5	5	0.25µL XbaI 0.25µL PstI	50
CEYFP (E6)	0.6	43.9	5	0.25µL XbaI 0.25µL PstI	50
CEYFP (E7)	0.5	44.0	5	0.25µL XbaI 0.25µL PstI	50
pBad-TetR (F4)	2.5	42	5	0.25µL EcoRI 0.25µL SpeI	50
pBad-TetR (F5)	1.7	42.8	5	0.25µL EcoRI 0.25µL SpeI	50
pSB-CEYFP (G4)	2.9	41.6	5	0.25µL XbaI 0.25µL PstI	50
pSB1C3	15.5	46		0.25µL EcoRI 0.25µL PstI	62

Incubated at 37^oC for 75 minutes.

Used Red buffer for the EcoRI/SpeI and EcoRI/PstI digests
Used Tango buffer for the XbaI/PstI digests
Did not heat kill upon removal from incubation, put directly into -20^oC fridge.

Continue Ligation on Saturday (See below).

June 5/2010

(In the lab:AS)
Objective: Ligate restriction products from June 3/2010.
Relevant information:

Have 3 tubes of part 1 (pBad-TetR)
- In ampicillin backbone
Have 10 tubes of part 2 (fluorescent protein - various)
- In ampicillin backbone
Will have 30 combinations
Will use pSB1C3 as plasmid backbone
- Used most of the pSB1T3 and want to save remainder for creating new backbone via PCR.

Method:
*Restriction digests were not heat killed after reactions. Freezing probably killed the restriction enzymes, but I will hea kill them at 80^oC for 20 minutes anyways prior to adding Ligase.

- Cool on ice for 10 minutes before adding ligase.

Master Mix	Volume/tube (µL)	Total Volume (µL)
DNA	6	---
10x Buffer	1	32
T4 DNA Ligase	.25	8
MilliQ H₂O	2.75	88

Add 4µL master mix to each DNA tube.

Follow-up: Ligation reactions will be transformed into DH5α cells

June 6/2010

(In Lab: JV, HS)

Objective:
Isolate the following plasmid DNA from DH5α:

pLacI-sRBS-Lumazine-dT in pSB1T3 (colony 2)
pLacI-sRBS-Lumazine-dT in pSB1T3 (colony 1)

Method:
Followed boiling lysis miniprep protocol. Eluted with 10µL Milli-Q H₂O and RNase A.

Notes:

Placed colony 2 in cell E10 of glycerol stocks and J6 of working plasmid box.
Placed colony 2 in cell F1 of glycerol stocks and J5 of working plasmid box.

Objective:
Transformed the following plasmid DNA into DH5α cells:

pBad-TetR-CEYFP: (F5+E6), (B10+E7), (B10+E6), (F4+E6), (F5+E4), (F4+E7)
pBad-TetR-Fusion CEYFP: (F5+E3), (B10+E4), (F4+E3), (B10+E3), (B10+E5), (F4+E4), (F5+E4), (F5+E5), (F4+E5)
pBad-TetR-pSB CEYFP: (F4+B5), (B10+G4), (F4+G4), (F4+B5), (F5+B5), (F5+G4)
pBad-TetR-NEYFP: (F5+E1), (B10+E1), (F4+E2), (F5+E2), (B10+E2), (F4+E1)
pBad-TetR-pSB NEYFP: (F5+B4), (F4+B4), (B10+B4)

Positive control -> DH5α + pSB1C3
Negative control -> DH%α + Milli-Q H₂O

Method:
Followed Competent Cell Transformation protocol and used chloramphenicol as an antibiotic. We plated all 200µL of DNA onto the plates. The plates were incubated at 37^oC from 4:30pm to 10:00am.

Results:
None of the plates showed any growth.

June 7/2010

(In Lab: JV, HB, TF, AV)

Objective:
Purification of DNA to increase ligation and transformation efficiency.

Method:
BioBasic Protocol for Purification of PCR products.

DNA (from Working Plasmid Box) Purified:

pBAD-TetR (B10)
pBAD- TetR (F4)
pBAD-TetR (F5)
EYFP (B1)
pSB-NEYFP (B4)
pSB-CEYFP (B5)
NEYFP (E1)
NEYFP (E2)
Fusion CEYFP (E3)
Fusion CEYFP (E4)
Fusion CEYFP (E5)
CEYFP (E6)
CEYFP (E7)
EYFP (E8)
EYFP (E9)
EYFP (E10)
ECFP (F1)
ECFP (F2)
ECFP (F3)
EYFP (G1)
pSB-CEYFP (G4)

Objective:
Restrict and run 1% agarose gel of plasmids J5, J6, and pSB1T3 (June 2/10).

Method:

Restrictions

Component	Volume (µL)
Restriction Enzyme (XbaI)	0.25
Buffer (Tango)	2
Plasmid DNA	2
MilliQ H₂O	15.75

Incubated for 1 hour in 37^oC incubator.
Heat shocked for 10 min at 65^oC on heating block.

1% Agarose Gel

Lane	Sample	Load (µL)
1	1kb ladder	2 ladder + 2 dye (6X) + 8 MilliQ H₂O
2	J5-pLacI-SRBS-Lumazine-dT(1)	10 DNA + 2 Dye (6X)
3	J5-pLacI-SRBS-Lumazine-dT(1)restricted	10 DNA + 2 Dye (6X)
4	J6-pLacI-SRBS-Lumazine-dT(2)	10 DNA + 2 Dye (6X)
5	J5-pLacI-SRBS-Lumazine-dT(2)restricted	10 DNA + 2 Dye (6X)
6	pSB1T3	10 DNA + 2 Dye (6X)
7	pSB1T3 restricted	10 DNA + 2 Dye (6X)
8	Empty
9	Empty
10	Empty

Ran at 100V for 72 min.

IMAGE TO COME!!!!!!

June 7/2010 - Evening

(In Lab: AS, KG)

Objective:
Ligation of:

pBAD-TetR (F5) + CEYFP (E6)
pBAD-TetR (F5) + NEYFP (E1)
pBAD-TetR (F5) + pSB-NEYFP (B4)
pBAD-TetR (F5) + Fusion-CEYFP (E7)
pBAD-TetR (F5) + Fusion-CEYFP (E3)
pBAD-TetR (F5) + CEYFP (E7)
pBAD-TetR (F5) + NEYFP (E2)
pBAD-TetR (F5) + pSB-CEYFP (B5)
pBAD-TetR (F5) + Fusion-CEYFP (E5)
pBAD-TetR (F5) + pSB-CEYFP (G4)
pBAD-TetR (F4) + CEYFP (E7)
pBAD-TetR (F4) + NEYFP (E1)
pBAD-TetR (F4) + pSB-NEYFP (B4)
pBAD-TetR (F4) + pSB-CEYFP (B5)
pBAD-TetR (F4) + CEYFP (E6)
pBAD-TetR (F4) + Fusion-CEYFP (E4)
pBAD-TetR (F4) + Fusion-CEYFP (E3)
pBAD-TetR (F4) + pSB-CEYFP (G4)
pBAD-TetR (F4) + Fusion-CEYFP (E5)
pBAD-TetR (F4) + NEYFP (E2)
pBAD-TetR (B10) + pSB-NEYFP (B4)
pBAD-TetR (B10) + pSB-CEYFP (G4)
pBAD-TetR (B10) + NEYFP (E1)
pBAD-TetR (B10) + CEYFP (E6)
pBAD-TetR (B10) + CEYFP (E7)
pBAD-TetR (B10) + Fusion-CEYFP (E4)
pBAD-TetR (B10) + pSB-CEYFP (B5)
pBAD-TetR (B10) + Fusion-CEYFP (E5)
pBAD-TetR (B10) + Fusion-CEYFP (E3)
pBAD-TetR (B10) + NEYFP (E2)

Method:

June 8/2010

(In the lab: JV, AV)
Objective: Follow the overexpression of our pLacI-sRBS-Lum-dT construct.
Method: FILL ME OUT!!!!!!
Results:

Time	OD₆₀₀ F1	OD₆₀₀ E10
0	0.118	0.103
30	0.133	0.111
30	0.145	0.116
90
120	0.160	0.124
150	0.120	0.093
180	0.129	0.100
210	0.145	0.122
240	0.158	0.145
270	0.171	0.178
300	0.194	0.222
330	0.223	0.280
360	0.252	0.364
390	0.296	0.458
420	0.338	0.557^†
450	0.394	0.656
480	0.453	0.675
510	0.530	0.688
540	0.598^†	0.706
600	0.633	0.752
660	0.653
720	0.679
∞	1.278

† Overexpression induced by adding 1mM IPTG.
Following overexpression, 1mL of cells was removed from the culture, spun down at ~13000xg for 20 seconds, excess media removed and rinsed with water.
Suspended cells in 8M urea, mixed with 6x dye and ran on 18% SDS-PAGE gel for 90 minutes at 200V. Gel stained overnight.
Results: IMAGE TO COME!!!!

Objective: Calculate quantity of DNA in pBad-TetR and fluorescent protein mini-preps by staining an agarose gel.
Method: Restrict plasmid DNA (done by AV,HB,TF on June 7/2010) and run on a 1% TAE agarose gel (JV).

Lane	Gel 1 Sample	Gel 1 Load	Gel 2 Sample	Gel 2 Load
1	1kb Ladder	2µL dye, 2µL ladder 8µL MilliQ H₂O	1kb Ladder	2µL dye, 2µL ladder 8µL MilliQ H₂O
2	Restricted EYFP (B1)	10µL DNA 2µL Dye	Restricted Fusion CEYFP (E3)	10µL DNA 2µL Dye
3	Unrestricted EYFP (B1)	10µL DNA 2µL Dye	Unrestricted Fusion CEYFP (E3)	10µL DNA 2µL Dye
4	Restricted pSB-CEYFP (B5)	10µL DNA 2µL Dye	Restricted Fusion CEYFP (E4)	10µL DNA 2µL Dye
5	Unrestricted pSB-CEYFP (B5)	10µL DNA 2µL Dye	Unrestricted Fusion CEYFP (E4)	10µL DNA 2µL Dye
6	Restricted ECFP (F2)	10µL DNA 2µL Dye	Restricted EYFP (E10)	10µL DNA 2µL Dye
7	Unrestricted ECFP (F2)	10µL DNA 2µL Dye	Unrestricted EYFP (E10)	10µL DNA 2µL Dye
8	Restricted pSB-CEYFP (G4)	10µL DNA 2µL Dye	Restricted pSB NEYFP (B4)	10µL DNA 2µL Dye
9	Unrestricted pSB-CEYFP (G4)	10µL DNA 2µL Dye	Unrestricted pSB NEYFP (B4)	10µL DNA 2µL Dye
10	Restricted EYFP (G1)	10µL DNA 2µL Dye	Restricted ECFP (F3)	10µL DNA 2µL Dye
11	Unrestricted EYFP (G1)	10µL DNA 2µL Dye	Unrestricted ECFP (F3)	10µL DNA 2µL Dye
12	Restricted NEYFP (E2)	10µL DNA 2µL Dye	pBad-TetR (F5)	10µL DNA 2µL Dye
13	Unrestricted NEYFP (E2)	10µL DNA 2µL Dye	Restricted Fusion CEYFP (E5)	10µL DNA 2µL Dye
14	Restricted pBad-TetR (B10)	10µL DNA 2µL Dye	Unrestricted Fusion CEYFP (E5)	10µL DNA 2µL Dye
15	Unrestricted pBad-TetR (B10)	10µL DNA 2µL Dye	pBad-TetR (F4)	10µL DNA 2µL Dye
16	Restricted CEYFP (E6)	10µL DNA 2µL Dye	Restricted pSB1T3	10µL DNA 2µL Dye
17	Unrestricted CEYFP (E6)	10µL DNA 2µL Dye	Unrestricted pSB1T3	10µL DNA 2µL Dye
18	Restricted NEYFP (E1)	10µL DNA 2µL Dye		10µL DNA 2µL Dye
19	Unrestricted NEYFP (E1)	10µL DNA 2µL Dye
20	Restricted ECFP (F1)	10µL DNA 2µL Dye
21	Unrestricted ECFP (F1)	10µL DNA 2µL Dye
22	Restricted EYFP (E9)	10µL DNA 2µL Dye
23	Unrestricted EYFP (E9)	10µL DNA 2µL Dye
24	Restricted CEYFP (E7)	10µL DNA 2µL Dye
25	Unrestricted CEYFP (E7)	10µL DNA 2µL Dye
26	Restricted EYFP (E8)	10µL DNA 2µL Dye
27	Unrestricted EYFP (E8)	10µL DNA 2µL Dye

Ran gel at 100V for 90 minutes.
Results:

No bands visible except for pSB1T3 lanes, therefore could not quantify anything that had not already been quantified.
Also, purification of DNA done on June 7/2010 seemed to reduce amount of pDNA in sample.

Objective: Restrict mms6 (D9,D10) and dT (C1) so we can ligate the dT onto the mms6 coding region.
Method:
mms6 Restriction

2µL mms6 pDNA
2µL Red buffer
0.25µL EcoRI
0.25µL SpeI
15.5µL MilliQ H₂O

dT Restriction

2µL dT pDNA
2µL Orange buffer
0.25µL EcoRI
0.25µL XbaI
15.5µL MilliQ H₂O

Incubated for 1 hour at 37^oC
Heat shock on heat block (80^oC) for 20 minutes
Ligation

2µL dT pDNA
2µL mms6 pDNA
0.25µL T4 DNA Ligase
1µL 10x buffer
4.75µL MilliQ H₂O

Analyze results on 1% TAE agarose gel

Lane	Sample	Load (µL)
1	1kb ladder	0.5 ladder; 2 dye; 9.5 MilliQ H₂O
2	Unrestricted mms6 (D9)	10 DNA; 2 Dye
3	Restricted mms6 (D9)	10 DNA; 2 Dye
4	Unrestricted mms6 (D10)	10 DNA; 2 Dye
5	Restricted mms6 (D10)	10 DNA; 2 Dye
6	Unrestricted dT (C1)	10 DNA; 2 Dye
7	Restricted dT (C1)	10 DNA; 2 Dye
8	Empty
9	Empty
10	Empty

Results:

Looks like the mms6 DNA was not cut at all. Therefore is doubtful that the ligations will work.

June 8/2010 - Evening

Objective: Transform pLacI-sRBS-Lum-dT constructs assembled via three antibiotic assembly on June 3/2010. Also transform mms6-dT constructs assembled today using old insertion method.
Method: Follow transformation protocol. Results: No colonies anywhere

June 9/2010

(in the lab: TF, JV)
Objective: Transform mms6-dT ligation reactions from June 8/2010.
Method: Followed transformation protocol and transformed the following:

mms6 (D9) + dT (C1)
mms6 (D10) + dT (C1)
pUC19 (positive control)
Water (negative control)

Results: No transformants on plates.

June 10/2010

(In the lab: AV, HB, JV)
Objective: Repeat ligation of mms6 (B9,D9,D10) and dT (C1).
Method:
mms6 Restriction

2µL mms6 pDNA
2µL Red buffer
0.25µL EcoRI
0.25µL SpeI
15.5µL MilliQ H₂O

dT Restriction

2µL dT pDNA
2µL Orange buffer
0.25µL EcoRI
0.25µL XbaI
15.5µL MilliQ H₂O

Incubated for 1 hour at 37^oC.
Killed enzymes by heating to 80^oC for 20 minutes
Ligation

5µL dT pDNA
5µL mms6 pDNA
0.5µL T4 DNA Ligase
2µL 10x buffer
7.5µL MilliQ H₂O

Incubated at room temperature overnight.
Results:
Analyzed on 1% TAE agarose gel:

Lane	Sample	Load (µL)
1	1kb ladder	0.5 ladder; 2 dye; 9.5 MilliQ H₂O
2	Unrestricted mms6 (B9)	5 DNA; 2 dye; 5 MilliQ H₂O
3	Restricted mms6 (B9)	5 DNA; 2 dye; 5 MilliQ H₂O
4	Unrestricted mms6 (D9)	5 DNA; 2 dye; 5 MilliQ H₂O
5	Restricted mms6 (D9)	5 DNA; 2 dye; 5 MilliQ H₂O
6	Unrestricted mms6 (D10)	5 DNA; 2 dye; 5 MilliQ H₂O
7	Restricted mms6 (D10)	5 DNA; 2 dye; 5 MilliQ H₂O
8	Unrestricted dT (C1)	5 DNA; 2 dye; 5 MilliQ H₂O
9	Restricted dT (C1)	5 DNA; 2 dye; 5 MilliQ H₂O
10	D9 + C1 Ligation (June 8/2010)	5 DNA; 2 dye; 5 MilliQ H₂O

Gel run for 80 minutes at 100V

Looks like everything was restricted. Ligations may work this time.
Follow-up: Ligation mixtures can be restriction tested and (if cutting works) transformed into DH5α cells.

Objective: Transform pDNA from distribution plates into DH5α cells to generate glycerol stocks for lab.
Method:
Remove DNA from the following locations on the 2010 distributions kits:

double terminator (B0010-B0010; AKA B0017) from kit plate 2 well 6K (pSB1A2)
double terminator (B0010-B0012; AKA B0015) from kit plate 1 well 23L (pSB1AK3)

Transform into DH5α cells using transformation protocol, with pUC19 as positive control (1ng/µL), and water as negative control.
Results:

Positive control: TMTC (too many to count) colonies
B0010-B0010: 41 colonies
B0010-B0012: 120 colonies

June 14/2010 Evening

(In the lab: TF, DM, HS)
Objective: Restriction Digest of RBS-xylE with EcoRI and SpeI

Method:

Restriction Digestions

Pipetted 15.5µL of water, into 2 reaction tubes (0.6mL) each.
Pipetted 2µL of red buffer into each of them.
Pipetted 2µL of rbs-xylE plasmid DNA into both tubes, but taking only the thawed liquid on the side.
Because this was not proper protocol for aliquoting DNA, we thawed the DNA out completely and then put 2µL more of the rbs-xylE plasmid DNA in.
Pipetted 0.25µL of EcoRI enzyme and 0.25µL of SpeI enzyme into the restriction reaction tube.
Placed in incubator (37^oC) for 1 hour.
Placed in ice for 10 minutes.

Objective: Test Ligations of rbs-xylE with T4-Ligase from iGEM -20^oC and from HJ's lab's -20^oC.

Method:

Pipette 12.75µL of Milli-Q H₂O into 4 mincrocentrifuge tubes.
Pipette 2µL of 10X T4-Ligase buffer into all 4 tubes.
Pipette 5µL of the RD product into both iGEM ligase tubes and HJ-Lab Ligase tubes.
Pipetted 5µL of the RD control into both iGEM ligase tubes and HJ-Lab ligase tubes.
Incubate overnight

June 15/2010

(In the lab: JV)

Objective:Continue T4-Ligase check and confirm that it is functional.

Method:Run plasmid DNA;uncut, cut, and ligated on a 1% agarose gel (TAE)

Lane	Sample	Load (µL)
1	rbs-xylE	10 DNA solution + 2 Dye
2	rbs-xylE R.D.	10 DNA solution + 2 Dye₂O
3	rbs-xylE [iGEM ligation]	10 DNA solution + 2 Dye
4	rbs-xylE [HJ ligation]	10 DNA solution + 2 Dye
5	rbs-xylE [iGEM ligation control]	10 DNA solution + 2 Dye
6	rbs-xylE [HJ ligation control]	10 DNA solution + 2 Dye
7	1kb ladder	2 ladder + 2 dye + 8 Milli-Q H₂O
8	mms6 (B9) R.D.	10 DNA solution + 2 Dye
9	mms6 (B9)	10 DNA solution + 2 Dye
10	mms6 (D10) R.D.	10 DNA solution + 2 Dye
11	mms6 (D10)	10 DNA solution + 2 Dye
12	mms6 (D9) R.D.	10 DNA solution + 2 Dye
13	mms6 (D19)	10 DNA solution + 2 Dye
14	dt (C1) R.D.	10 DNA solution + 2 Dye
15	dt (C1)	10 DNA solution + 2 Dye

Result:Ran gel for 89 minutes at 100V. Gel was unreadable. I will redo the gel using and 8 well comb. IMAGE TO COME!!!!

Lane	Sample	Load (µL)
1	rbs-xylE R.D.	5 DNA solution + 1 Dye
2	rbs-xylE	5 DNA solution + 1 Dye
3	iGEM ligation	10 DNA solution + 2 Dye
4	iGEM ligation control	10 DNA solution + 2 Dye
5	HJ ligation	10 DNA solution + 2 Dye
6	HJ ligation control	10 DNA solution + 2 Dye
7	1kb ladder	2 ladder + 2 dye + 8 Milli-Q H₂O

Ran gel at 100V for 82 minutes.

Result:The gel "broke" while running. Jeff hypothesized the cause to be excessive heat. However, the DNA was still visible.IMAGE TO COME!!!!

Objective:Isolate plasmid DNA from DH5α cells.

Method:The plasmid DNA is:

1)double terminator B0017 (B0010-B0010) from 2010 kit plate 2:6K pSB1A2
2)double terminator B0015 (B0010-B0012) from 2010 kit plate 1:23L pSB1AK2

This will give us 2 additional dt's (3 total) into our working plasmid box to ligate onto the end of our constructs.

Used the boiling lysis miniprep protocol and elute with 50µL of Milli-Q H₂O with RNAse A.

These plasmids (labeled 1 & 2 above) are in:

working plasmid box: 1). J9 2). J10
glycerol sotck 2010 box: 1). F2 2). F3

DNA was then purified using the protocol for purification of PCR products (BioBasic). DNA was eluted with 35µL of elution buffer.

June 15/2010 Evening

(In the lab: AS)

Adam: not convinced that the rbs-xylE was cut properly last night. There doesn't appear to be and band where the insert should be.

Objective: To confirm that EcoRI & SpeI are cutting (also PstI). Use rbs-xylE as test plasmid DNA.

Method: Digest rbs-xylE with the following enzyme combinations:

EcoRI + SpeI (old [i.e. John's]) + Red Buffer
EcoRI + SpeI (new) + Red Buffer
EcoRI + PstI + Red Buffer
EcoRi + Red Buffer
SpeI (old) + Tango Buffer
SpeI (new) + Tango Buffer
PstI + Red Buffer
No enzyme controls (Red & Tango Buffer)

Reaction mix as follows:

Milli-Q H₂O 15.5µL
10X Buffer 2µL
pDNA 2µL
Enzymes 0.25µL + 0.25µL

Incubated at 37^oC for 1 hour . Analyze on 1% TAE Agarose gel as follows:

Lane	Sample	Load (µL)
1	No Enzyme Control (Tango)	10 DNA solution + 2 Dye
2	No Enzyme Control (Red)	10 DNA solution + 2 Dye
3	PstI	10 DNA solution + 2 Dye
4	SpeI (old)	10 DNA solution + 2 Dye
5	SpeI (new)	10 DNA solution + 2 Dye
6	EcoRI	10 DNA solution + 2 Dye
7	EcoRI + SpeI (old)	10 DNA solution + 2 Dye
8	EcoRI + SpeI (new)	10 DNA solution + 2 Dye
9	EcoRI + PstI	10 DNA solution + 2 Dye
10	1kb ladder	0.5 ladder + 2 dye + 9.5 Milli-Q H₂Oe

Results: Everything cuts exactly as it should. Continue with ligation and analysis. IMAGE TO COME!!!!

June 16/2010

(in lab: JV) Objective: To miniprep Adam's overnight cultures of xylE and rbs. Completing this will give us a working stock of this plasmid.

Method: Use the boiling lysis miniprep protocol and pufrify using BioBasic protocol for purification of PCR products.

Objective: Transform pLacI-sRBS-lumazine synthase-dt into BL21(DE3).

Method:

Followed transformation protocol

Changes to the protocol include:

Added 5µL DNA to 50µL BL21(DE3).
Incubated in 500µL SOC instead of 250µL LB
incubated for 90 minutes at 37^oC at 4:30pm.

Results: There wasn't any growth after overnight incubation. Possibility of an antibiotic mix-up.

June 16/2010 Evening

(in lab: ADS)

Objective: Continue with ligation test. Use restriction products to test T4 DNA ligase.

Method: Have 10µL of DNA remaining for each restriction. Ligate together one of the single cut reactions, and ligate one of the double cut reactions. 4µL of each sample will be tested against each ligase.
i.e.

EcoRI +SpeI (new) cut vs HJ's ligase
EcoRI + SpeI (new) cut vs iGEM ligase
SpeI (new) cut vs HJ's ligase
SpeI (new) cut vs iGEM ligase

Reaction Mixture:

DNA -> 4µL
10X Buffer -> 2µL
Milli-Q -> 13.5µL
Ligase -> 0.5µL

Prior to setting up reaction, heat kill restriction enzymes by heating to 80^oC for 20 minutes and subsequently cooling on ice for 10 minutes.

Ligations begun at 6:50pm

Will run samples at 30 minutes reaction time and overnight.

Analyze ligations in a 1% TAE Agarose gel

Lane	Sample	Load (µL)
1	No Enzyme Control (from last night)	1 DNA solution + 1 Dye + 4 H₂O
2	EcoRI + SpeI (old)(from last night)	1 DNA solution + 1 Dye + 4 H₂O
3	EcoRI + SpeI (new) vs HJ's Ligase	5 DNA solution + 1 Dye
4	EcoRI + SpeI (new) vs iGEM ligase	5 DNA solution + 1 Dye
5	SpeI (new) vs HJ's Ligase	5 DNA solution + 1 Dye
6	SpeI (new) vs iGEM ligase	5 DNA solution + 1 Dye
7	SpeI (old)(from last night)	1 DNA solution + 1 Dye + 4 H₂O
8	1kb Ladder	0.25 Ladder + 4.75 H₂O + 1 Dye

No observable ligation occurring 30 minutes with both ligases.

Objective: Prepare DNA for sequencing

Method: Need 20µL of DNA at 100ng/µL for each reaction. Need 20µL of 10µM primer for every 5 reactions.

Plasmids that need to be sequenced:

Name	Concentration (ng/µL)	Dilution Factor	Final Concentration (ng/µL)
A8-CFP complete	1395	1/5	280
B4-pSB NEYFP	1105	1/5	240
B5-pSB CEYFP	1055	1/5	210
B6-CFP complete	1285	1/5	260
D7-xylE	1820	1/10	182
D8-xylE	420	1/2	210
E1-NEYFP	235	1/2	117.5
E2-NEYFP	2980	1/10	300
E3-Fusion CEYFP	255	1/2	122.5
E4-Fusion CEYFP	490	1/2	245
E5-Fusion CEYFP	335	1/2	335
E6-CEYFP	1605	1/10	160
E7-CEYFP	1930	1/10	190
G4-pSB CEYFP	340	1/4	85
G5-CFP complete	355	1.4	89

Total of 15 primers -> 30 reactions
60µL of each VF2 & VR primers (10µL) -> send 65µL

June 17/2010

(in lab: JV, HB) Objective:Run Agarose gel of overnight samples from June 16/10 to test T4 DNA ligase

Method:Analyze ligation on a 1% TAE agarose gel.

Lane	Sample	Load (µL)
1	No Enzyme Control (from June 15)	2 DNA solution + 2 Dye + 8 H₂O
2	EcoRI + SpeI (old)(from June 15)	2 DNA solution + 2 Dye + 8 H₂O
3	EcoRI + SpeI (new) vs HJ's Ligase	10 DNA solution + 2 Dye
4	EcoRI + SpeI (new) vs iGEM ligase	10 DNA solution + 2 Dye
5	SpeI (new) vs HJ's Ligase	10 DNA solution + 2 Dye
6	SpeI (new) vs iGEM ligase	10 DNA solution + 2 Dye
7	SpeI (old)(from last night)	10 DNA solution + 2 Dye
8	1kb Ladder	0.5 Ladder + 9.5 H₂O + 2 Dye

Ran for 80 minutes at 100V.

Results:
IMAGE TO COME!!!!

June 17/2010 Evening

(in lab: JS, AS, KG)

Objective:Do PCR to observe ligations

Method:

Master Mix	Volume/tube (µL)	Total Volume (µL)
MilliQ H₂O	10.8	59.4
DNA	2	-------
5X Phusion Buffer	4	22
10µM dNTP's	.25	8
Forward Primer	1	5.5
Reverse Primer	1	5.5
Polymerase	0.2	1.1

Reaction Mixtures:

HJ Double
iGEM Double
HJ Single
iGEM Single
controls (no forward or reverse primer and no DNA)

June 18/2010

(in lab: JV)

Objective:Observe the ligations from June 17/10 that were amplified using PCR.

Method:Observe using 1% TAE agarose gel electrophoresis. Ran the gel for 80 minutes at 100V.

Lane	Sample	Volume (µL)
8	1kb Ladder	2 Ladder + 8 H₂O + 2 Dye
2	control no DNA	20 PCR reaction + 4 6X Dye and used 12 of this solution
3	control no reverse primer	20 PCR reaction + 4 6X Dye and used 12 of this solution
4	control no forward primer	20 PCR reaction + 4 6X Dye and used 12 of this solution
5	HJ single	20 PCR reaction + 4 6X Dye and used 12 of this solution
6	iGEM single	20 PCR reaction + 4 6X Dye and used 12 of this solution
7	HJ double	20 PCR reaction + 4 6X Dye and used 12 of this solution
8	HJ double	20 PCR reaction + 4 6X Dye and used 12 of this solution

Results:IMAGE TO COME!!!!

June 21/2010

(in lab: JV)

Objective:Create more pSB1A3 plasmid.

Method:Run a PCR of the plasmid.

DIlute 10X -> 0.1 + 0.9 MilliQ H₂O DIlute 10X -> 0.1 + 0.9 MilliQ H₂O

Master Mix	Volume/tube (µL)
MilliQ H₂O	10.8
DNA	2
5X Phusion Buffer	4
10µM dNTP's	.25
Forward Primer	1
Reverse Primer	1
Polymerase	0.2

Use ligtest setting. WIll run 36 cycles.

Use 3 controls:

no forward primer
no reverse primer
no DNA

Results:PCR samples were run on a gel (1% 1XTAE) with the PCR samples from June 22/10. This gel was run on June 22/10

June 22/2010

(in lab: JV, HS)

Objective:To overexpress pLacI-sRBS-lumazine synthase-dt in DH5α cells.

Method:Incubate cells in 500mL LB w/Tet. At OD 0.6 (600λ) induce overexpression of lumazine synthase with IPTG (1µM). Take T_o, T₁, T₂, T₃ readings after induced with IPTG.

Time	OD F1 (600λ)	OD E10 (600λ)
0	0.078	0.072
60	0.122	0.110
90	0.128	0.125
120	0.140	0.138
150	0.149	0.157
180	0.169	0.183
210	0.205	0.230
240	0.243	0.276
270	0.278	0.323
300	0.317	0.398
330	0.394	0.428
360	0.394	0.480
390	0.441	0.553
400	----	0.594 (induced)
410	0.502	-----
450	0.580 (induced)	0.736
510	0.804	1.005
570	1.065	1.066
630	1.053	1.043
∞	0.055 (1/10 dilution)	0.078 (1/10 dilution)

Objective:PCR amplify the following biobricks:

dt (23L)
dt (6K)
dt (C1)
mms6
control (no DNA)

Method:

Master Mix	Volume/tube (µL)	Total Volume (µL)
MilliQ H₂O	----	89.6
DNA	2	-------
5X Phusion Buffer	4	24
10µM dNTP's	.4	2.4
Forward Primer	0.2	1.2
Reverse Primer	0.2	1.2
Polymerase	0.2	1.2

1.2% Agarose gel electrophoresis (1X TAE), used to analyze the above PCR's. 25mL of agarose solution was used in the small gel rig.

Lane	Sample	Volume (µL)
1	pSB1A3	1 PCR sample + 2 Dye + 9 H₂O
2	no DNA	1 PCR sample + 2 Dye + 9 H₂O
3	no reverse primer	1 PCR sample + 2 Dye + 9 H₂O
4	no forward primer	1 PCR sample + 2 Dye + 9 H₂O
5	1kb ladder	0.5 ladder + 2 dye + 9.5 Milli-Q H₂O
6	mms6	1 PCR sample + 2 Dye + 9 H₂O
7	dt (23L)	1 PCR sample + 2 Dye + 9 H₂O
8	dt (6K)	1 PCR sample + 2 Dye + 9 H₂O
9	dt (C1)	1 PCR sample + 2 Dye + 9 H₂O
10	no DNA	1 PCR sample + 2 Dye + 9 H₂O

Ran the gel for 40 minutes at 100V.

June 22/2010 Evening

(in lab: KG, AS)

Objective:To run a PCR of:

dt (J9,J10,C1)
mms6 (B9,F10)
rbs-xylE (I1,I2)
xylE (D7, D8)
pLacI-sRBS-lumazine synthase-dt (I8,I9)
sRBS-lumazine synthase-dt (A1,A2,B7,B8,G2,G3)
pLacI (A9,D1)
pSB1A3

so that we have more DNA for restrictions and ligations.

Method:

Master Mix 1	Volume/tube (µL)	Total Volume (µL)
MilliQ H₂O	10.8	226.8
DNA	2	4
5X Phusion HF Buffer	4	84
10µM dNTP's	1	21
Forward Primer (VF2)	1	21
Reverse Primer (VR)	1	21
Fimnzzymes polymerase	0.2	4.2

Master Mix 2	Volume/tube (µL)	Total Volume (µL)
MilliQ H₂O	10.8	226.8
DNA	2	4
5X Econo Taq Buffer	4	84
10µM dNTP's	1	21
Forward Primer (VF2)	1	21
Reverse Primer (VR)	1	21
Imitrages polymerase (Econo Taq)	0.2	4.2

Master Mix for pSB1A3	Volume/tube (µL)	Total Volume (µL)
MilliQ H₂O	10.8	31
DNA	1	20
5X Phusion Buffer	4	10
10µM dNTP's	1	2.5
Primer (SB-prep-2Ea)	1	2.5
Primer (SB-prep-3P)	1	2.5
Fimnzzymes polymerase	0.2	0.5

Master Mix for pSB1A3	Volume/tube (µL)
MilliQ H₂O	10.8
DNA	2
5X Econo Taq Buffer	4
10µM dNTP's	1
Primer (SB-prep-2Ea)	1
Primer (SB-prep-3P)	1
Imitrages polymerase	0.2

June 23/2010

(in lab: JV, HS)

Objective:: To run the pcr products on an agarose gel.

Method: Run on 1% agarose gel using the large gel rig.

Lane	Sample	Load (µL)
1	1kb DNA Ladder	0.5 Ladder + 2 Dye + 9 H₂O
2	Phu-dt-J9	5 PCR sample + 2 Dye + 3 H₂O
3	Phu-dt-J10	5 PCR sample + 2 Dye + 3 H₂O
4	Phu-dt-C1	5 PCR sample + 2 Dye + 3 H₂O
5	Fus-mms6-B9	5 PCR sample + 2 Dye + 3 H₂O
6	Fus-mms6-F10	5 PCR sample + 2 Dye + 3 H₂O
7	Fus-rbs-xylE-I1	5 PCR sample + 2 Dye + 3 H₂O
8	Fus-rbs-xylE-I2	5 PCR sample + 2 Dye + 3 H₂O
9	Fus-xylE-D7	5 PCR sample + 2 Dye + 3 H₂O
10	Fus-xylE-D8	5 PCR sample + 2 Dye + 3 H₂O
11	Fus-pLacI-sRBS-lum-dt I8	5 PCR sample + 2 Dye + 3 H₂O
12	Fus-pLacI-sRBS-lum-dt I9	5 PCR sample + 2 Dye + 3 H₂O
13	Fus-sRBS-lum-dt A1	5 PCR sample + 2 Dye + 3 H₂O
14	Phu-sRBS-lum-dt A2	5 PCR sample + 2 Dye + 3 H₂O
15	Phu-sRBS-lum-dt B7	5 PCR sample + 2 Dye + 3 H₂O
16	Phu-sRBS-lum-dt B8	5 PCR sample + 2 Dye + 3 H₂O
17	Phu-sRBS-lum-dt G2	5 PCR sample + 2 Dye + 3 H₂O
18	Phu-sRBS-lum-dt G3	5 PCR sample + 2 Dye + 3 H₂O
19	Phu-pLacI A9	5 PCR sample + 2 Dye + 3 H₂O
20	Phu-pLacI D1	5 PCR sample + 2 Dye + 3 H₂O
21	dt J9	5 PCR sample + 2 Dye + 3 H₂O
22	dt J10	5 PCR sample + 2 Dye + 3 H₂O
23	dt C1	5 PCR sample + 2 Dye + 3 H₂O
24	mms6 B9	5 PCR sample + 2 Dye + 3 H₂O
25	mms6 F10	5 PCR sample + 2 Dye + 3 H₂O
26	rbs-xylE I1	5 PCR sample + 2 Dye + 3 H₂O
27	rbs-xylE I2	5 PCR sample + 2 Dye + 3 H₂O
28	xylE D7	5 PCR sample + 2 Dye + 3 H₂O
29	xylE D8	5 PCR sample + 2 Dye + 3 H₂O
30	pLacI-sRBS-lum-dt I8	5 PCR sample + 2 Dye + 3 H₂O
31	pLacI-sRBS-lum-dt I9	5 PCR sample + 2 Dye + 3 H₂O
32	sRBS-lum-dt A1	1 PCR sample + 2 Dye + 9 H₂O
33	sRBS-lum-dt A2	1 PCR sample + 2 Dye + 9 H₂O
34	sRBS-lum-dt B7	1 PCR sample + 2 Dye + 9 H₂O
35	sRBS-lum-dt B8	1 PCR sample + 2 Dye + 9 H₂O
36	sRBS-lum-dt G2	1 PCR sample + 2 Dye + 9 H₂O
37	sRBS-lum-dt G3	1 PCR sample + 2 Dye + 9 H₂O
38	sRBS-lum-dt A9	1 PCR sample + 2 Dye + 9 H₂O
39	sRBS-lum-dt D1	0.5 ladder + 2 dye + 9.5 Milli-Q H₂O
40	pSB1A3 control	5 PCR sample + 2 Dye + 3 H₂O
41	pSB1A3	5 PCR sample + 2 Dye + 3 H₂O
42	pSB1A3 control	5 PCR sample + 2 Dye + 3 H₂O
43	pSB1A3	5 PCR sample + 2 Dye + 3 H₂O

Ran gel for 45 minutes at 100V and stained in EtBr for 20 minutes and de-stained for 10 minutes.

all Econe tubes are red
all Phusion tubes are blue

Results:: Picture to come!!!!!!!!!

Objective: Adam put in overnight cultures on June 22. I want to extract the plasmid DNA.

Method:

Put in overnight cultures at 8:30pm and taken out at 9:30am next morning.
All cultures were DH5α in LB w/ Amp.
Cultures were incubated at 37_oC.
Next morning cultures were "minipreped" using boiling lysis miniprep protocol.

Results: Will view plasmid DNA extracted, on a 1% agarose gel (1X TAE) run at 100V for an hour.

Lane	Sample	Load (µL)
1	1kb Ladder	0.5 Ladder + 2 Dye (6X) + 9.5 Milli-Q H₂O
2	CFP complete 2010 box C8	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
3	Fusion CEYFP 2007 box H5	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
4	NEYFP 2007 box J6	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
5	Fusion CEYFP 2007 box J5	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
6	CFP complete 2010 box A10	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
7	pSB-NEYFP 2010 box B6 (C1?)	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
8	Fusion CEYFP 2007 box I5	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
9	xylE 2007 box B9	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
10	CEYFP 2007 box G6	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
11	CFP complete 2010 box A6	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
12	pSB-CEYFP 2010 box C5	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
13	pSB-NEYFP 2010 box B6 (C1?)	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
14	pSB-CEYFP 2010 BOX C3	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
15	xylE 2007 box C4	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
16	CEYFP 2007 box H6	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
17	NEYFP 2007 box J6	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O

Picture to come!!!!!!!!!

June 24/2010

(in lab: JV, HS, AV)

Objective:: To run a PCR of biobrick parts from out working plasmid box.

Method:

Master Mix	Volume/tube (µL)	Total Volume (µL)
MilliQ H₂O	12.8	448
DNA	1	-------
5X Phusion Buffer	4	140
10µM dNTP's	1	35
Forward Primer	0.5	17.5
Reverse Primer	0.5	17.5
Polymerase	0.2	7

Ran for 25 cycles on lig25 setting.

Objective:: Restriction Digest, Run on agarose gel, and ligate PCR products from June 23/10.

Method:

Six tubes for restriction digest:

Part 1	Part 2
Lane 8 (I2)	Lane 4 (C1)
Lane 19 (A9)	Lane 8 (I2)
Lane 19 (A9)	Lane 8 (I2)

Restriction Digest Reaction Mixture:

Ingredient	Volume (µL)
Plasmid DNA	2
Enzyme	0.5
Buffer	2
Milli-Q H₂O	15.5

Incubate at 37^oC for 1 hour. Then heat kill the enzymes at 80^oC for 20 minutes.

2% Agarose gel electrophoresis:

Lane	Sample	Load (µL)
1	50bp Ladder	1 Ladder + 2 Dye (6X) + 5 Milli-Q H₂O
2	Fus-RBS-xylE (I2); Lane 8	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
3	Fus-RBS-xylE (I2) restricted; Lane 8	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
4	Phu-dT (C1); Lane 4	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
5	Phu-dT (C1) restricted; Lane 4	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
6	Phu-pLacI (A9); Lane 19(1)	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
7	Phu-pLacI (A9) restricted; Lane 19(1)	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
8	Phu-pLacI (A9); Lane 19(2)	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
9	Phu-pLacI (A9) restricted; Lane 19(2)	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
10	Fus-RBS-xylE (I2); Lane 8(1)	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
11	Fus-RBS-xylE (I2) restricted; Lane 8(1)	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
12	Fus-RBS-xylE (I2); Lane 8(2)	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O
13	Fus-RBS-xylE (I2) restricted; Lane 8(2)	5 PCR sample + 2 Dye (6X) + 5 Milli-Q H₂O

Ran gel at 100V for 60 min and stained in EtBr for 15 min.

Picture to come!!!!!!!!!

Objective:: Run 1% agarose gel of PCR samples from June 24/10.

Lane	Sample	Load (µL)
1	A4-pBAD	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
2	A4-pBAD	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
3	A6-SRBS	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
4	A7-SRBS	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
5	A8-CFP Complete	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
6	A10-SRBS	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
7	B1-EYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
8	B2-N-term tag	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
9	B4-pSB-NEYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
10	B5-pSB-NEYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
11	B6-CFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
12	B10-pBAD-TetR	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
13	D3	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
14	D4-C-term tag	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
15	D5-C-term tag	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
16	D6-PLacI	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
17	E2-NEYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
18	E6-CEYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
19	E7-CEYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
20	1kb ladder	0.5 ladder + 2 Dye (6X) + 9.5 Milli-Q H₂O
21	E8-EYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
22	E9-EYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
23	E10-ECFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
24	F1-ECFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
25	F2-ECFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
26	F3-ECFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
27	F4-pBAD-TetR	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
28	F5-pBAD-TetR	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
29	G1-EYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
30	G4-pSB-CEYFP	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
31	G6-pBAD(1)	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
32	G7-pBAD(2)	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
33	G8-N-term tag	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
33	G9-Lumazine	5 DNA + 2 Dye (6X) + 5 Milli-Q H₂O
33	1kb ladder	0.5 ladder + 2 Dye (6X) + 9.5 Milli-Q H₂O

Picture to come!!!!!!!!!

June 28/2010

(in lab: JV, HS, AV, HB)

Objective:: To restrict, run 1% agarose gel, and ligate all mms6, lumazine, xylE into PET28(a) for overexpression tests.

Method:

Team:Lethbridge/Notebook/Lab Work/June

From 2010.igem.org

Contents

June 2010

June 1/2010

June 2/2010

June 2/2010 - Evening

June 3/2010

June 3/2010 - Evening

June 5/2010

June 6/2010

June 7/2010

June 7/2010 - Evening

June 8/2010

June 8/2010 - Evening

June 9/2010

June 10/2010

June 14/2010 Evening

June 15/2010

June 15/2010 Evening

June 16/2010

June 16/2010 Evening

June 17/2010

June 17/2010 Evening

June 18/2010

June 21/2010

June 22/2010

June 22/2010 Evening

June 23/2010

June 24/2010

June 28/2010