Wednesday July 7, 2010

Raida

• Today I completed the transformation of my construct (R0040-I3504) and plated them in 6 different Ampicilin Resistant plates.

Procedure: Transformation

• 1. Thaw Competent Cells
• 2. Add 20 uL DNA
• 3. Ice for 1/2 hour, Heat Shock 5 minutes at 37 degrees Celcius, Ice 5 min.
• 4. Recover with 250 uL SOC for 30 minutes
• 5. Spin down at 14 RPM, Concentrate to approximately 100 uL
• 6. Plate 25 uL on plate 1,2,3 and Plate 50 uL on plate 4,5,6
• 7. Leave in Incubator overnight for 20 hours

The plates are labeled as following:

• P1: R0040-I13504 (construct tube C 6 July) 25 uL
• P2: R0040-I13504 (construct tube D 6 July) 25 uL
• P3: R0040-I13504 (construct tube F 6 July) 25 uL
• P4: R0040-I13504 (construct tube C 6 July) 50 uL
• P5: R0040-I13504 (construct tube D 6 July) 50 uL
• P6: R0040-I13504 (construct tube F 6 July) 50 uL

Then I left the plates in the Incubator which is at 37 degrees Celcius. I will leave it there until 10:00 am tomorrow (July 8th), which would let the cells grow for 20 hours.

Wells 2-9 Jeremy's I0500+B0034 with and without restriction enzymes. Wells 11-19 Dev's E0040+B0015 with and without enzymes.

Jeremy

Today I completed the plasmid switch for I0500 into pSB1AK3, mini prep I0500+B0034 with Sigma-Aldrich and finished a restriction digest of EcoRI and PstI on I0500+B0034

• 37 degrees for 1 hour and heat kill 80 degrees for 20 minutes
• ran on 1% agarose gel at 90V

Chris

Today, I drafted the potential budget for this year's project. The total expenses this year are projected to amount to $64 500 with that money being used towards paying students, travelling and lodging at MIT, paying for laboratory materials, and buying T-shirts as well as a mascot suit. Our current financial status is sufficient to cover approximately 80% of this with $54 600 in total funds. These have been provided by BioAlberta, Alberta Innovates Technology Funds, O'Brien Student Centre, and Alberta Heritage Foundation for Medical Research.

As well, in the morning, Dev and I used the Sigma Aldrich GenElute Plasmid Preparation kit and modified instructions to isolate the plasmids of the constructions of I0500 - B0034 and E0040-B0015 as well as the parts of I0500, I13507, and E1010.

In the afternoon, I contacted a General Manager from New England Biolabs about possible sponsorship and received a positive response. They will send some enzymes to us in the coming week.