Team:Heidelberg/Notebook/miRNA Kit/September

01/09/2010

Gel 100901-1

Gel 100901-2

• 8 colonies of each plate (see previous day) were picked and colony-PCR was performed. Furthermore, the colonies were used for inocculation of LB miniprep cultures. The numbers behind the construct name refer to vector type (1 = not SAP treated, 2 = dephosphorylated using SAP; see previous day). For hRluc (1300 bp band)), Luc2 (2300 bp band), CMV_TetO (1000 bp band) and the FRT (500 bp band) site, positive colonies could be observed (gel 100901-1 and 100901-2).
• PCR for the construction of the standardized Tet Repressor was performed. The PCR was set up using the Phusion HF MasterMix and standard PCR protocol was applied (annealing temperature 59 °C, 2 replicates). The result of the PCR was analyzed on a 1 % agarose gel (gel 100901-2, lower right side) and the right 700 bp band was clearly visible.
• Digestion of the TetR fragment with EcoRI/PstI was performed according to the standard digestion protocol and the fragment was subsequently ligated into pSB1C3 (SAP treated or non-treated). The ligation mix was transformed into Top10 cells.

02/09/2010

Gel 100902-1

• 8 colonies were picked from plates 1 and 4 colonies from plates 2 from the previous days cloning and analyzed via colony PCR performed according to the PCR standard protocol. The results of the colony PCR were analyzed on a 1 % agarose gel run for 1 h @ 100 V (gel 100902-1 and 100902-2). The following colonies were afterwards inocculated (LB miniprep cultures):

• TetR (1.4 and 1.6)
• shRNA6 (1.1, 1.4 and 1.8)
• shRNA7 (1.1, 1.5 and 1.6)
• shRNA8 (1.1, 1,2, 1,3)
• shRNA9 (1.2)

Gel 100902-2

Gel 100902-3

• The cultures inocculated the day before were mini prepped by applying a Qiagen Miniprep Kit. Afterwards, a test digestion with NotI was performed and the result was analyzed on a 1 % agarose gel, run for 35 min @ 100 V (gel 100902-3). According to the test digestion result, the following samples were send for sequencing @ GATC:

• CMV_TetO2 (.4, 1.6)
• FRT (1.1, 1.3)
• Luc2 (1.4, 1.6)
• hRluc (1.1, 1.3, 1.4)

03/09/2010

Gel 100903-1

Gel 100903-2

• Test digestion with NotI of the cloned constructs on the previous day (gel 100903-1). For the TetR constructs the expected 600 bp band and for the shRNA constructs, the expected 200 bp band were clearly visible. For each construct, one sample was send for sequencing. Sequencing results were correct for all samples send for sequencing.
• Purification of single binding sites against shRNA6-10, miR-375/376/122. For each target, the perfect, 9-12 and 9-22 randomized binding sites were purified and analyzed on an agarose gel (100903-2). All bands were clean, with just a slight amount of side product for the 9-22 randomized binding sites.

• cloning of shRNAs into pcDNA5/FRT/TO

04/09/2010

• mini-prep of pcDNA5 with shRNAs 1, 2, 3, 5, 5* and 6 (each four colonies from two independent transformations)
• PCR of shRNA constructs (including shRNA 7, 8 and 9 as well)
  • gel: fine, everywhere amplified sequences below 200 bp
• digestion of promising tuning constructs with BspEI and StuI
  • gel: plasmids seem to be cut only once again (problem maybe BspEI), size is correct
    • suggestion: another digestion on monday with SalI and KpnI, then: submission for sequencing

• mini-prep of pcDNA5 with shRNAs 1, 2, 3, 5, 5* and 6 (each four colonies from two independent transformations)
• PCR of shRNA constructs (including shRNA 7, 8 and 9 as well)
  • gel: fine, everywhere amplified sequences below 200 bp
• digestion of promising tuning constructs with BspEI and StuI
  • gel: plasmids seem to be cut only once again (problem maybe BspEI), size is correct
    • suggestion: another digestion on monday with SalI and KpnI, then: submission for sequencing

05/09/2010

• transformation of final Kit constructs F1 - F16 into E. coli Top10 cells

06/09/2010

• inocculation of miniprep LB cultures for the constructs F1 - F16 from single colonies from the plates prepared the previous day
• digestion of PCR amplified vector backbone pSB1A3 with EcoRI/PstI; after subsequent heat inactivation, digestion with DpnI was performed and the vector was purified by applying a nucleotide removal kit.

• digestion of tuning construct with KpnI and SalI result in weird band pattern on the gel
• PCR and purification of the binding sites looked fine on the gel
• submission of tuning constructs and pcDNA5 containing different miRNAs for sequencing

07/09/2010

Gel 100907-1: Ligation Control. Numbers indicate the F-Construct numbers of the parts assembled

• Miniprep of constructs F1 - F16 using a Qiagen Miniprep Kit
• Digestion of 500 ng of each construct with the following enzymes

• F2, F3, F5 with EcoRI/NheI
• F8, F1, F15, F11, F12, F13, F14, F7 with PstI/SpeI

• Ligation of the follwing constructs into pSB1A3 via standard 3A assembly

• F3/F15, F2/F1, F2/F8, F3/F1, F2/F15, F5/F7, F5/F11, F5/F12, F5/F13, F5/F14

• Digestion of 500 ng F6 with XbaI; purification via nucleotide romoval kit
• Annealing of XbaI mutation oligo according to the following protocol

• prepare mixtrure of oligos (5 ul @ 100 mM each) in NEB buffer 2 (volume 50 ul)
• heat up to 95 °C in heating block; cool down to room temperature slowly
• incubate on ice for 10 min

• 0.5, 1 and 3 ul of the annealed oligos were then ligated into 50 ng of pre-digested F6 construct;

All Ligations were controlled by loading 10 ul of ligation reactiong onto a 1 % agarose gel (100907-1), run for 35 min @ 100 V

• repetition of TetR and tuning construct cloning
• purification and digestion of PCR amplified binding sites with NotI

08/09/2010

Gel 100908-1: Colony-PCR.

• Colony PCR of the previous days' cloning and miniprep cultures were inocculated in parallel; The result of the PCR was analyzed on a 1 % agarsoe gel (100908-1) run for 35 min @ 100 V.

• cloning of shRNAs in pcDNA5 again
• further digestion of binding sites with AscSI (analog to SgfI) and purification
• preparation of psyCHECK2 for insertion of binding sites and shRNAs for first test measurements
• transformation of TetR constructs
• ligation of both inserts for the tuning construct, extraction of the right insert (3000bp) and ligation into the backbone

09/09/2010

Gel 100909-1

Gel 100909-2

• Miniprep of the cultures inocculated on the previous day followed by test digestion of 300 ng of each constructs with NotI (gel 100909-1). The positive samples were send for sequencing @ GATC. The gel looks weird due to use of 0.05 x TAE buffer instead of 0.5 x.
• The nine Luc2-SV40 constructs were with XbaI and NheI (negative testing), and XhoI and PstI (positive testing) for the induced mutation. The reaction was set up according to the standard protocol, and then the samples were visualized on a 1% agarose gel (gel 100909-2).

• colony PCR of TetR constructs are positive
• inoculate TetR for miniprep

10/09/2010

Tet test digest

colony PCR shRNAs

• PCR of SV40 Terminator with BamHI site according to standard PCR protocol (annealing @ 58 °C)
• Assembly of the following constructs, again via 3A standard assembly.

• F6/F1, F6/F8, F10/F4, F5/F1, F16/SV40, F5/F8
  

Subsequent Transformation into DH5alpha cells

• miniprep of TetR
• test digest of TetR with BspEI & NotI and with SgfI gave promising results
  • YES it was done with marker instead of loading dye but:
    • for lanes 2-4 you see a stronger band at 700 pb (size of TetR)
    • for landes 5-7 you see a stronger band at 5000 bp as it was linearized with SgfI

• colony PCR of binding site in PsiCheck and tuning construct.. tuning construct looks promising, BS nothing on the gel except for primers
• colony PCR of shRNAs look promising even though we cannot say whether still the old shRNA is inside
  • PCR of CMV shRNA which leads to a size of 1200bp

11/09/2010

Gel 100911-1

Gel 100911-2

• Colonies were picked from the plates from the previous days' cloning and a colony PCR was performed according to the standard protocol. In parallel LB miniprep cultures were inocculated for each colony (gel 100911-1 and 100911-2).

• miniprep of tuning construct and assorted shRNA BS PsiCheck colonies. Repetition of test PCR (for tuning primer L11 and L13, for BS primer L1 and 86a (dominik)) with miniprep template. Tuning construct looks kind of good on the gel, but I don't want to get you hopes up too soon.. it will be send for sequencing on monday.
• Tet Repressor cloned!!!
• shRNA 2,3,5,7,8 and 9 seems to be cloned according to test digest

test digest

12/09/2010

Gel 100912-1

Gel 100912-2

• Minipreps were done by applying a Qiagen Miniprep Kit for the positive candidates picked on the previous day. Test digestion was performed by digesting ~ 250 ng of each construct with SpeI/NheI and the result was analyzed on a 1 % agarose gel (100912-1 and100912-2) run for 40 min @ 100 V. For all the constructs we got the right band despite construct F10/F4.3. Positive constructs were send for sequencing @ GATC.

• miniprep of shRNA constructs and Tuning constructs

13/09/2010

• digestion of the following parts:

• F4 (E/N), F5 (S/P), R5 (E/N), R6 (E/N), R1 (S/P), R2 (S/P), R3 (S/P), R4 (S/P), R9 (E/P), R10 (E/P); after heat inactivation subsequent purification using a nucleotide removal kit (elution volume 20 ul).

• ligation of the following parts (50 ng of vector, equal amounts of parts)

• F4/F5 into pSB1A3 (precut E/P)
• R5 with either R1, R2, R3 or R4 into pSB1C3 (precut E/P)
• R6 with either R1, R2, R3 or R4 into pSB1C3 (precut E/P)
• R9 into pSB1C3 (precut E/P)
• R10 into pSB1C3 (precut E/P)

• transformation of 10 ul ligation reaction after heat inactivation into DH5alpha cells

• digestion and cloning of binding sites and PsiCheck.. again
• submission of constructs for sequencing

14/09/2010

Gel 100914-1

Gel 100914-2

• note: for sequential digest of pcDNA5 or shRNAs with ApaI and HindIII use buffer 2

• Colony- PCR for the cloning products done on the previous day (gels 100914-1 and 100914-2 on the right)
• positive clones were Mini-Prepped and test digested

15/09/2010

Gel 100915-1

• digestion of TetR construct with AsiSi and NotI or SgfI and NotI respectively
  • for cloning of binding sites for miR122, miR375 and miR376
• ligation of the other binding sites for synthetic pri-miRNA (6, 7, 8, 9 and 10) with digested psiCHECK2

• PCR for the introduction of the Kozag-Sequence in front of the hRluc_BGH part; two strategies were performed in parallel using different touchdown-PCR protocols. Protocol nr. 1 was set up as follows:

• 25 ul Phusion HF MasterMix
• 0.5 ul of 100 um primers
• 1 ul of template R12 (50 ng/ul)
• 23 ul of water

Touchdown PCR was performed according to the following protocol:
................................................
95 °C/5 min
................................................ (1x)
95 °C/30 s
68 °C/45 s (- 0.5 °C/cycle)
72 °C/1 min
................................................ (35x)
72 °C/10 min
................................................ (1x)
4 °C/ forever
................................................

Protocol nr. 2 was set up as follows:

• 25 ul Phusion HF MasterMix
• 0.1 ul of 100 um primers
• 1 ul of template R12 (50 ng/ul)
• 23.8 ul of water

Touchdown PCR was performed according to the following protocol:
................................................
95 °C/5 min
................................................ (1x
95 °C/15 s
68 °C/45 s (- 0.5 °C/cycle)
72 °C/1 min
................................................ (15x)
95 °C/15 s
60 °C/30 s
72 °C/1 min
................................................ (20x)
72 °C/10 min
................................................ (1x)
4 °C/ forever
................................................

Each PCR was performed in two replicates. The result of the PCRs was analyzed on a 1 % agarose gel (100915-1), run for 1 h @ 100 V. The PCR nr. 2 was subsequently PCR purified by applying a Qiagen PCR purification KIT and used for the cloning

16/09/2010

• Cloning of Kozag_hRluc_BGH fragment into pSB1C3 and Constructs R24-R31
• Cloning of the XhoI/XmaI_suffix oligo via NheI/PstI into the TetR construct F16)

• Digestion of PCR fragment with SpeI/PstI according to 3A standard protocol; digestion of destination Vector pSB1C3
• Ligation and Transformation were done according to the standard protocol

• PCR to generate binding site oligos, nucleotid removal, digestion, nucleotid removal
• different digestion and ligation protocols tested for binding sites and psiCHECK2, afterwards transformation
• possibilities:
  • dilution of oligo insert [1:100,1:500], ratio: insert/vector = 5/1
  • SAP treatment for oligos to prevent them from forming concatemers
  • SAP treatment of backbone to prevent it from re-ligation
  • cut of backbone into two fragments to ease gel excision (if done) and advance ligation
  • ligation process: 1h @ RT or over-night @ 4°C in darkness
    • note: bs122 confused with bs7

17/09/2010

• colony PCR, mini-prep and digestion of promising psiCHECK or TetR constructs containing binding site
  • control plates with horrible number of re-ligations

Gel 100917-1

Gel 100917-2

• Selection of colonies from the plates (see previous days' cloning) via colony-PCR using the standard sequencing primers; a ~5.5 kb fragment should be visible for the assembled construct K1-K8, if colony-PCR was positive (gel 100917-1 and 100917-2). No sample shows a 5.5 kb band, but that's most likely due to the very difficult amplification of such a long fragment with Fermentas 2x PCR MasterMix (Taq-based). Therefor 3 miniprep cultures were inocculated for each construct (K1-K8). The TetR oligo insertion and the Kozag_hRluc_BGH cloning into pSB1C3 gave the right bands on the gel.

19/09/2010

• Miniprep of the previous days inocculated miniprep cultures

20/09/2010

Gel 100920-1

Gel 100920-2

• test digestion of the miniprepped clones (previous day) with EcoRI/PstI; For all clones at least 2 digestions gave the exactly expected band (gel 100920-1 and 100920-2); therefor we can say, that the tuning construct is succesfully assembled and ready to be tested

21/09/2010

22/09/2010

• digestion of R23 with EcoRI and PstI in EcoRI Buffer ([http://www.neb.com NEB]) and ligation into digested [http://partsregistry.org/Part:pSB1C3 pSB1C3], transformation, growing on selective agar plates (chloramphenicol), following standard protocol recommendations

Dual Luciferase Assay

50ng of each plasmid DNA was transfected into HEK 293 T-REx cells and other cell lines HEK, HeLa, Huh7 in 96-well plate format using FuGENE. Each sample was done in 8 replicates. This cell line contains plasmid with Tet repressor thus allowed us to observe very efficient repression of Firefly luciferse expression. No shRNA was cloned into plasmid. Big standard deviation in the luciferase expression in Huh7 cells may be due to low transfection efficiency of this cell line.

Promoter strength characterization in HEK 293 T-REx cell line

Promoter strength characterization in different cell lines

23/09/2010

Gel 100923-1. Analytical gel with following lanes: 1) till 8) colony PCR products with nice bands as expected at ~ 800 bp especially at lane 1, 4, 6 and 8, lane 9) 1kb Plus Ladder (Invitrogen)

• minipreps (using Quiagen Kit) and colony-PCR of each 8 colonies of R23 in [http://partsregistry.org/Part:pSB1C3 pSB1C3] (digested, ligated, transformed and plated on previous day)
  • • PCR product of R23C on analytical gel (see gel 100923-1)
  • digestion of R23 and R33 with either SpeI and PstI or EcoRI and NheI
  • ligation into digested [http://partsregistry.org/Part:pSB1A3 pSB1A3], transformation, growing on selective agar plates (ampicillin), following standard protocol recommendations

Dual Luciferase Assay was performed as on [previous day]. Cells were not harvested after 20h, but 48h.

Promoter strength characterization in HEK 293 T-REx cell line

Promoter strength characterization in different cell lines

24/09/2010

• inoculation and colony PCR of the transformed (23A+33A)=56C construct from yesterday. Same PCR protocol was used, even though the fragment should be 1100 and therefore elongation was probably not long enough. The PCR showed a band at 300bp, which dominik says is normal if you have religated vector. But nevertheless, miniprep of La1, La3 and La4 were made, because they didn't show a strong negative PCR band.
• test digestions (actually they are preparative, the only difference is I will test them on the gel as well to be sure I have the right thing)
  • R23A from yesterday (miniprep 8 and 8/) is digested with Eco&Nhe, expected fragment is 500bp
  • R33 with Spe&Pst, expected fragment 600bp
  • R56C with Spe&Pst, expected fragment 1100bp
  • R8 with Eco&Nhe, expected frament 1000bp
• ligation of R23A+R33+backbone C
• ligation of R56C + R8 + backbone A

25/09/2010

• PCR amplification of standardised pcDNA5 p55 and p1 with primer D47/48 and D55/69

26/09/2010

Gel 100926-1. Analytical gel with following lanes: 1) R33 E/N (from 23^rd September) 2) R23_1 S/P 3) R23_6 4) R33C 5) R23_4 6) R23_8 7) 1kb Plus Ladder (Invitrogen) 8) R33C E/N 9) R23_4 S/P 9) R23C_8 S/P

Gel 100926-2. PCR results of p55 and p1: p1 with primer 47/48 (lane 1), p1 with primer 55/70 (lane 2), p55 with primer 47/48 (lane3), p55 with primer 55/70

• miniprep of R23C cultures again (colonies from transformation (done on wednesday))
• check of all digestions on an analytical gel (see gel 100926-1)
  • fragment for R23_6 is a bit smaller than expected (rather 400 bp than 500 bp)
    • originally digested R23A runs slightly below 500 bp, too (data not shown)
      • because of reverse elements and resulting secondary structure?
  • repetition of ligation with R23_6 and old R33 (nice band at roughly 600bp)
    • including negative control at this time with only backbone [http://partsregistry.org/Part:pSB1A3 pSB1A3]
  • transformation

tuning construct:

• gel extraction of PCR on p55 and p1 (see gel 100926-2)
• recloning of R1,R4 and R7 into standardbackbone [http://partsregistry.org/Part:pSB1A3 pSB1A3]
  • digest 500ng of R1, R4 and R7 with EcoRI and PstI
  • heat inactivate 20 min at 80°C
  • Nucleotide removal
  • ligate 150ng and 250ng of insert into 30ng [http://partsregistry.org/Part:pSB1A3 pSB1A3] 1h at RT and transform ligation

27/09/2010

Gel 100927-1: colony PCR on K1 (lane 1-8), K4 (lane 9-16) and K8 (lane 17-24)

Gel 100927-2: colony PCR K1 (lane 1&2), K4 (3&4) und K7 (5&6), K3 digested with BamHI (7), K3 digested NheI and SpeI (8), R33 in pSB1A3 digested with EcoRI and PstI (9), R33 digested with NheI and SpeI (10)

tuning construct:

• colony-PCR on K1, K4 and K7 cloned into [http://partsregistry.org/Part:pSB1A3 pSB1A3] showed nearly only positives as a band of 400bp is expected by using the primer pair 50/75
• miniprep of K1, K4 and K7
• send for sequencing
• cloning of K3 into [http://partsregistry.org/Part:pSB1A3 pSB1A3]:
  • digest K3 with PstI and EcoRI
  • ligate 200ng with 30ng of vector [http://partsregistry.org/Part:pSB1A3 pSB1A3]
  • transform ligation and plate on an Ampicillin plate
• digest shRNA 6 (F11) and shRNA 7 (F12):
  • 1h at 37°C with HindIII
  • heat inactivate 20 min at 80°C
  • digest 1h at 37°C with AflII
  • purify by Nucleotide removal kit and elute in 20µl

repressor construct:

• a lot of religations, thus: a lot of colonies to pick
• colony-PCR and test digestion with SpeI and PstI of promising mini-preps revealed some positive samples
• ligation with R8 and R11, respectively (each digested with EcoRI and NheI) in [http://partsregistry.org/Part:pSB1C3 pSB1C3] (backbone, digested with EcoRI and PstI), following standard protocol recommendations
• growth of transformed cells on selective agar plates (chloramphenicol) over night

28/09/2010

Gel 100928-1. Colony PCR of K3 construct

Gel 100928-2. Test digest of with PstI and EcoRI (lane 1-6), test digest with BamHI (lane 7-12), K1 (lane 1&2), K4 (lane 3&4), K7 (lane 5&6)

Gel 100928-3. Digestion of K1 (lane 1-4), K4 (lane 5-8) and K7 (lane 9-12) with HindIII and AflII

tuning construct:

• colony PCR of K3 (gel 100928-1)
• inoculation for mini prep of K3
• mini prep of K1, K4 and K7
• test digestion of K1, K4 and K7 with PstI & EcoRI and BamHI (gel 100928-2 and 100928-3)
• digestion of K1, K4 and K7 with HindIII and AflII prior to gel extraction
• ligation of shRNA 6 and 7 into K1, K4 and K7
• transformation of ligation
• plate ligation on ampicillin plates

repressor construct:

• re-do of mini-preps and digestions of (R23+R33)C_1, (R23+R33)C_14, (R23+R33)C_17 and (R23+R33)C_23 (promising)
  • check on gel, submission for sequencing next day
• analysis of transformations from yesterday (i. e. (R23+R33) + R8 or (R23+R33) + R11 in chloramphenicol standard backbone)
  • only re-ligations (as assumed from negative control), more colonies next day

29/09/2010

Gel 100929-1 first gel: double digestion of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] with PstI and EcoRI: [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] (lane 1-4), [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] (lane 5-8), second gel: digestion of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] with BamHI: [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] (lane 1-4), [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] (lane 5-8)

Gel 1000929-2 digestion of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] with HindIII and AflII: [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] (lane 1&2), [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3](lane 3-12)

gel 100929-3 pcr on binding sites for shRNA 10

tuning construct:

• mini Prep on [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] constructs
  • test digestion with PstI & EcoRI and BamHI showed all positive results
  • digest [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] with HindIII and AflII
• cloning of shRNA 6 and 7 into [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1], [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3], [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337038 K4] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337044 K7]:
  • colony PCR on ligation from the 28/09/2010 did not reveal any positives by using the following protocol:
  • colony PCR on ligations from the 28/09/2010 did not reveal any positives by using the following protocol:
  • start from the beginning again: in doublicates:
  • first procedure:
    • digest PCR on shRNA 6 and 7 as well as [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1], [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3], [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337038 K4] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337044 K7] with HindIII and AflII
    • purify shRNAs with nucleotide removal kit
    • purify digested [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] with gel extraction kit
    • ligate [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1], [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3], [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337038 K4] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337044 K7] with shRNA 6 and 7
  • second procedure:
    • digest [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337038 K4] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337032 K1] as well as shRNA6 and 7 from PCR product and purify via nucleotide removal kit
    • ligate [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337038 K4] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] with shRNA 6 and 7
  • transform all ligations
• cloning of binding sites:
  • second strand synthesis PCR on binding sites for shRNA 10

Gel 100929 r-4: colony PCR of repressor construct, band at 350bp points at backbone religation.

Gel 100929 r-5: test digestion of miniprep number 14 withe EcoRI and NheI shows expected band at 1100bp. Digestions of R8 and R11 were also positive, DNA cut out with SpeI and PstI runs at 800bp. Lane 1=miniprep 14 undigested, lane2=miniprep 14 digested, lane3=miniprep 23 digested, lane4=R8 undigested, lane5= R8 digested, lane6=R11 undigested, lane7=R11 digested

repressor construct:

• colony PCR after transformation of P56+R8 and P56+R11 (P56=R23A+R33) yielded no positive results
• miniprep of colonies 11, 14, 17 and 23 from P56 cloning were repeted because of bad miniprep results yesterday, then digested with S/P
• R8 and R11 were digested with E/N again
• digestion of P56 colony 14 was positive on the gel, digestion of R8 and R11 also gave the right fragments
• [http://partsregistry.org/Part:pSB1C3 pSB1C3] backbone was [http://www.fermentas.com/templates/files/tiny_mce/coa_pdf/coa_ef0511.pdf SAP] treated to reduce religation that was likely to be the problem with previous transformations
• ligation of P56 (14) with R8 and R11 and SAPed backbone and control ligation with backbone only, transformation

30/09/2010

Gel 1000903-2 colony PCR on shRNA10 cloned into K3 and K4

Gel 1000930-3 colony PCR on shRNA10 into K3 and K4

tuning construct:

• colony pcr on shRNA 6 and 7 into construct [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337038 K4]
• cloning of binding sites for shRNA 10 into [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337038 K4]:
  • digestion of binding sites (perfect, imperfect 9-12 and imperfect 9-22) for shRNA10 with xhoI and ageI :) and construct [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337036 K3] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K337038 K4] in [http://partsregistry.org/Part:pSB1A3 pSB1A3] with xmaI and xhoI
  • ligation of binding sites with digested constructs
  • transformation of ligation into TOP10 cells
  • plate on ampicillin plates ON

Gel 100930-1 colony PCR of Repressor construct with different promoters (R8 or R11). Positive colonies show an amplification product at 2500bp (lanes 1,2,4-8, 10, 13-16)

• plenty of colonies on the P56+R8 and P56+R11, NO colonies on control plate with SAPed backbone, colony PCR revealed 50% of positive clones