Team:Imperial College London/Modules/Detection

Overview of the detection module.

Design

We make use of a cercarial protease, called elastase [http://www.uniprot.org/uniprot/P12546 (UniProt,] [http://merops.sanger.ac.uk/cgi-bin/pepsum?id=S01.144 MEROPS)], necessary to penetrate human skin for parasite detection. The surface our B. subtilis is coated with a surface protein which is design to release a sequestered quorum sensing signal upon cleavage by the elastase.

The detection module consists of three section: Cell Wall anchor, Linker and AIP

The AIP activates signal transduction

We used the autoinducing peptide (AIP) from the ComCDE system of S. pneumonia because it is linear, facilitating posttranslational modifications such as circularization or addition of non-standard amino acids. Using a system foreign to B. subtilis also reduces false activation and noise our system has to deal with, making it more robust. Because of the nature of the AIP receptor ComD, the AIP must be in the cleaved form, i.e. not attached to the surface protein anymore, to activate signal transduction, adding an additional level of robustness to the system.

The Linker is a substrate for the cercarial elastase

The AIP is connected to a cell wall anchor via a linker. It is this linker that confers specificity to our surface protein to be cleaved by the elastase, which recognises a four amino acids sequence, included in our linkers. In order to test the optimal design for the linker, we created 6 different linkers which vary in length and flexibility. Furthermore we created a do-it-yourself Software Tool that makes it possible for everybody to custom design the surface protein sequence to include a protease cleavage site of their choice, allowing you to detect any such protease by implementing this new surface protein into our system.

Detection of Parasite proteases

In order to detect Schistosoma in water they have to release their elastse. This does not usually occur in the absense of a stimulus however it is easy to trigger this behaviour in vivo. Upon detection of human (or mice) skin lipids and temperatures close to 37°C, the invasive behaviour is triggered. Several proteases are released from pre- and postacetabular glands or the cercaria at the leading edge of the invading parasite. While multiple enzymes are released, only one protease activity was found to be necessary for invasion in S. mansoni, haematobium and douthitti [http://books.google.co.uk/books?id=JL7qs-O3z1MC&pg=PA299&lpg=PA299&dq=advances+in+parasitology+london&source=bl&ots=b8mvkz6zyC&sig=t7Pwy0egEDQ9dW-GIZEK7Pb6xxs&hl=en&ei=n05ATKLnJsqNjAePyOAG&sa=X&oi=book_result&ct=result&resnum=3&ved=0CCEQ6AEwAg#v=onepage&q=advances%20in%20parasitology%20london&f=false (Kasny et al. 2009)]: Schistosoma elastase 2a and b (SmCE-1a/b) [http://www.jbc.org/content/277/27/24618.abstract (Salter et al. 2002)]. SmCE are trypsin family serine proteases the specificity of which has been investigated by various studies. It appears that the following sites are preferred:

• P4 - S,T
• P3 - S,W,Y
• P2 - P
• P1 - L

Subtle differences exist between SmCE-2a and b as far as their P4 and P3 sites are concerned. Cleavage kinetics were determined for four different sites, P4-P1: SWPL, TWPL, RWPL, RRPL with R previously determined as unfavourable at P4 and P3. For P4 an 11-fold difference in activity was determined between favourable S/T and R, while a 3 fold difference was determined for P3 W to R [http://www.jbc.org/content/277/27/24618.abstract (Salter et al. 2002)]. The most favourable sequence would therefore be SWPL.

The cell wall binding domain anchors our module to the cell surface

Crystal structure the protein LytC used to anchor our peptide to the cell wall. (EBI, 2010)

The AIP-linker peptide anchored to the cell wall by a protein called LytC, which is native to B. subtilis helping to increase efficiency of expression. It uses electrostatic interactions of several cell wall binding domain repeats to non-covalently bind to the cell wall, and expose our detection apparatus to the elastase. We chose it over other options, such as covalently bound proteins that use the Gram positive sortase system, membrane bound proteins or other non-covalently bound cell wall proteins for several reasons. We wanted to minimize the chance of false activation of signal transduction, so we eliminated cell membrane bound proteins, as these would bring the AIP in much greater proximity to the receptor ComD. Whilst the sortase system is well understood for some bacteria such as Staphylococcus aureus, it has not been studies to a great extend in B. subtilis and differences in the peptidoglycan structure meant it would have been much more error prone to use this system in our chassis. Thus the most viable option were non-covalently bound surface proteins, and LytC the best candidate within this group as a result of several studies, most notably by Kobayashi et al., that had used it before to anchor catalytic domains, as well as short peptides, to the cell wall of B. subtilis.

[http://www3.interscience.wiley.com/journal/119078114/abstract?CRETRY=1&SRETRY=0 Tsuchiya et al. 1999]

[http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6VSD-426YS50-D&_user=217827&_coverDate=12%2F31%2F2000&_rdoc=1&_fmt=high&_orig=search&_sort=d&_docanchor=&view=c&_acct=C000011279&_version=1&_urlVersion=0&_userid=217827&md5=4764a7bdabc3649925f082f989e835f5 Kobayashi et al. 2000]

[http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6VSD-46G3T2V-4&_user=217827&_coverDate=01%2F31%2F2002&_rdoc=1&_fmt=high&_orig=search&_sort=d&_docanchor=&view=c&_acct=C000011279&_version=1&_urlVersion=0&_userid=217827&md5=c807c9de3e3579777b08fdd77cd32294 Kobayashi et al. 2002]

[http://jb.asm.org/cgi/reprint/185/22/6666 Yamamoto et al. 2003]

Additionally, since we do not intend to knock out the original gene from the B. subtilis strain we will not interfere with it normal expression, avoiding expression at the wrong time or overexpression, and since we aim to remove the catalytic domain from LytC or CwlC our fusion protein should lose their cell wall turn-over functions and only act as cell wall anchors.

The detection module is non-covalently bound to the cell wall that overlies the phospholipid bilayer.

Summary and Testing

Before finalizing our system we modelled the requirements for our detection module to analyse its functionality. For more information on that follow this link to our Modelling. It showed that we could reach the threshold concentration of AIP needed to activate our system, 10ng/ml, quite easily, with the amount of surface protein we expect to express, as well as estimating the time needed to set off our system at a given concentration of elastase in the water. The assembly of the protein was done in several steps. We first amplified LytC out of the B. subtilis genome by PCR, simultaneously using primer extension to add optimised ribosome binding sites to it, and inserted into pSB1C3. We later ligated the protein with the promoter pVeg. Parallel to this, we ligated the 6 linker sequences ordered from Eurofins|mwg with a double terminator BOO14. We then made use of a natural ACCI site in the LytC gene, to ligate our promoter-LytC sequence with our linker-terminator sequence to create 6 different surface protein constructs, for testing in B. subtilis. In order to be able to detect out protein use His-tags which have only been addedd to test constructs but not the final module, as the tag would most likely interfere with the module’s function. The his-tags have been added to the C-terminus of the AIP, probably inhibiting correct detection of the AIP by the two component system comD/E. However using a his-tag allow us to test for three different, very important things: We can lyse a bacterial culture to isolate our his-tagged protein form the lysate. Detection in this step would demonstrate successful expression of our fusion protein. Secondly we can place our bacteria in a solution with high osmolarity. As mentioned this eludes the non-covalently bound proteins from the cell wall by interfering with the electrostatic interactions of the cell wall binding domain witht the peptidoglycans, which should also work for our fusion proteins. Detection of our protein in this step would demonstrate expression as well as correct localization in the cell wall. Last of all we could place the cells in medium containing the elastase or a protease with the same or very similary specificity. If we are able to pull down the his-tagged peptide then it would demonstrate expression, localization and that the correct cleavage site is accessible to the protease and the AIP can be successfully cleaved off. For a complete list of the biobrick created for this module see our page on Parts submitted to the registry.

Here's a picture of the final construct: