Team:Lethbridge/Notebook/Protocols

From 2010.igem.org

(Difference between revisions)
(Assembly of BioBricks using Red/White 3-Antibiotic Assembly Method)
Line 147: Line 147:
==<font color="white">Assembly of BioBricks using <font color="red">R</font>e<font color="red">d</font>/<font color="red">W</font>h<font color="red">i</font>t<font color="red">e</font> 3-Antibiotic Assembly Method==
==<font color="white">Assembly of BioBricks using <font color="red">R</font>e<font color="red">d</font>/<font color="red">W</font>h<font color="red">i</font>t<font color="red">e</font> 3-Antibiotic Assembly Method==
-
[[Image:Lethbridge 101021RFP.jpg|thumb|Easy visual screening of transformed <i>Escherichia coli</i> cells using the Red/White 3-antibiotic assembly method]]
+
[[image:Lethbridge 101021RFP.jpg|200px|right|Easy visual screening of transformed <i>Escherichia coli</i> cells using the Red/White 3-antibiotic assembly method]]
This method is a variant of the 3-Antibiotic Assembly Method that has been developed by Ginkgo Bioworks and New England Biolabs.<br>
This method is a variant of the 3-Antibiotic Assembly Method that has been developed by Ginkgo Bioworks and New England Biolabs.<br>
In the 3-Antibiotic Assembly Method, the destination backbone (<partinfo>pSB1A3</partinfo>, <partinfo>pSB1C3</partinfo>, <partinfo>pSB1K3</partinfo>, or <partinfo>pSB1T3</partinfo>) is amplified via PCR, using DNA received in the 2010 Distribution. <br>
In the 3-Antibiotic Assembly Method, the destination backbone (<partinfo>pSB1A3</partinfo>, <partinfo>pSB1C3</partinfo>, <partinfo>pSB1K3</partinfo>, or <partinfo>pSB1T3</partinfo>) is amplified via PCR, using DNA received in the 2010 Distribution. <br>

Revision as of 01:05, 22 October 2010




Feel free to look around our notebook!


Contents

Common Protocols:

Assembly of BioBricks using Red/White 3-Antibiotic Assembly Method

Easy visual screening of transformed Escherichia coli cells using the Red/White 3-antibiotic assembly method

This method is a variant of the 3-Antibiotic Assembly Method that has been developed by Ginkgo Bioworks and New England Biolabs.
In the 3-Antibiotic Assembly Method, the destination backbone (<partinfo>pSB1A3</partinfo>, <partinfo>pSB1C3</partinfo>, <partinfo>pSB1K3</partinfo>, or <partinfo>pSB1T3</partinfo>) is amplified via PCR, using DNA received in the 2010 Distribution.
We had difficulty generating a large quantity of plasmid backbone in this manner.
As an alternative, we exploited the ability of part <partinfo>J04450</partinfo> (expressing red fluorescent protein - RFP) to produce a very strong red color following incubation in a variant of the 3-Antibiotic Assembly Method.
We retained the selection advantage associated with having a destination plasmid containing a different antibiotic resistance than the upstream and downstream plasmid. Additionally, with an expressing RFP available in a wide variety of BBF plasmids, we not only are able to visually screen which colonies are likely to contain our expected assembly product, we also have a built-in negative control; if there is no assembly product available to be ligated into the destination plasmid, the expressing RFP biobrick will re-ligate and transform, producing red colonies.

Step 1 - Restriction

Performed according to Ginkgo Bioworks/NEB BioBrick Assembly Kit, with several modifications.
Digestion of upstream part

  • 5µL Upstream part plasmid
  • 0.5µL EcoRI-HF
  • 0.5µL SpeI
  • 2.5µL 10x NEBuffer 2
  • 0.25µL 100x BSA
  • 16.25µL MilliQ H2O

Digestion of downstream part

  • 5µL Downstream part plasmid
  • 0.5µL XbaI
  • 0.5µL PstI
  • 2.5µL 10x NEBuffer 2
  • 0.25µL 100x BSA
  • 16.25µL MilliQ H2O

Digestion of destination plasmid

  • 5µL Destination plasmid†‡
  • 0.5µL EcoRI-HF
  • 0.5µL PstI
  • 2.5µL 10x NEBuffer 2
  • 0.25µL 100x BSA
  • 16.25µL MilliQ H2O

Restriction digests were incubated at 37oC for 10 minutes.
Following each restriction digest, all samples were subjected to heating at 80oC for 20 minutes to irreversible denature the restriction endonucleases.

† Our typical concentrations obtained from our minipreps are approximately 50ng/µL, therefore adding 5µL of plasmid DNA gives the restriction reaction a concentration of 10ng/µL, as recommended in the NEB BioBrick Assembly Kit Literature.
‡ Destination plasmid is either pSB1A3, pSB1C3, pSB1K3, or pSB1T3, containing part <partinfo>J04450</partinfo> which is the expressing red fluorescent protein.

Step 2 - Ligation

Performed according to Ginkgo Bioworks/NEB BioBrick Assembly Kit
Ligation of Upstream and Downstream parts into Destination Plasmid

  • 2µL Upstream part digestion
  • 2µL Downstream part digestion
  • 2µL Destination Plasmid digestion
  • 2µL 10x T4 DNA Ligase Buffer
  • 1µL T4 DNA Ligase
  • 11µL MilliQ H2O

Ligation mixes were incubated on the bench top (~20oC) for 10 minutes, then transformed into competent DH5α cells.

Step 3 - Transformation

  1. Thaw 50µL of aliquotted competent cells (DH5α) on ice
  2. Gently pipet 2.0µL (~1ng) DNA (from ligation mix) into competent cells
  3. Incubate the cells on ice for 30 minutes
  4. Heat shock the cells in a water bath at 42oC for EXACTLY 45 seconds
  5. Incubate cells on ice for 5 minutes
  6. Add 400µL of sterile SOC media to the cells and incubate at 37oC for 90 minutes with shaking (250RPM)
  7. Plate 200µL on LB agar plate containing the appropriate antibiotic (reserve remaining cells and re-plate if no growth)
  8. Allow cell suspension to be absorbed into agar by leaving agar side down for 10-15 minutes
  9. Incubate the plates in the 37oC incubator for approximately 36 hours (agar on top)

Step 4 - Selection of Colonies and Colony PCR

Following ~36 hour incubation at 37oC, plates were inspected, and white colonies were picked and subsequently subjected to Colony PCR.
Colony PCR

Colony PCR

Protocols prior to the development of Red/White 3-Antibiotic assembly

Competent Cell Transformation

  1. Thaw 20µL of aliquotted cells (DH5α or BL21(DE3)) on ice.
  2. Gently pipet 2.0µL of DNA into competent cells
    ATTENTION:
    Do not perform any additional mixing
    Never use more DNA that 10% of the volume of the competent cells otherwise the cells get destroyed by osmotic shock
  3. Incubate the cells on ice for 30 minutes.
  4. Heat shock the cells in a water bath at 42oC for EXACTLY 45 seconds.
  5. Incubate the cells on ice for 5 minutes.
  6. Add 250µL sterile LB media to the cells and incubate at 37oC for 1 hour with shaking (200RPM).
  7. Plate 100µL and 50µL on prewarmed LB agar plate containing the appropriate antibiotic.
    For ligations, plate all 250µL.
  8. Leave plate for 10-15 minutes to soak the cell suspension into the agar.
  9. Flip plate over (agar on top)
  10. Incubate the plates in the 37oC incubator overnight

Boiling Lysis Plasmid Preparation (Miniprep)

  1. Aseptically transfer 1.5mL of each overnight culture to a 1.5mL microcentrifuge tube (MCT) and pellet the cells by centrifugation in a benchtop microcentrifuge (2min at 13000RPM)
  2. Remove and discard as much of the supernatant as possible by aspiration (e.g with a Pasteur Pipette). Do not suck up the cell pellet!!
  3. Rinse the cell pellet by washing 1.0mL of sterile MilliQ H2O gently down the inside wall of the MCT. This removes any traces of the supernatant adhering to the MCT wall while minimizing the disturbance to the cell pellet. (/li>
  4. Resuspend the cell pellet in 350µL of STET.
  5. Add 25µL of the Lysozyme solution and mix by inversion.
  6. Place the MCT in the bioling water bath for EXACTLY 35 seconds, remove and incubate on ice for 5 minutes.
  7. Pellet the cellular debris by centrifugation at 13000RPM for 15 minutes. Transfer the supernatant to a fresh MCT and discard the pellet.
  8. Precipitate the plasmid DNA by adding 40µL of 3.0M sodium acetate (pH 5.2) and 420µL isopropanol. Mix by inversion. Mix by inversion and incubate for 5 minutes at room temperature.
  9. Pellet the plasmid DNA by centrifugation at 13000RPM for 10 minutes at 4oC. A pellet of plasmid DNA should be visible at the base of the MCT when complete.
  10. Being careful not to disturb the pellet, discard the supernatant and rinse the pellet with 500µL of ice cold ethanol.
  11. Repeat above step.
  12. Invert and tap the open MCT several times against a piece of paper towel on your bench to remove as much ethanol as possible.
  13. Store the open MCT at room temperature for approximately 10 minutes to allow all remaining traces of ethanol to evaporate
  14. Add 50µL of TE (pH 8.0) containing RNase A and resuspend the plasmid DNA by flicking the base of the MCT with your finger. The plasmid DNA is ready for use or can be stored long term at -20oC.

Restriction of Plasmid DNA (pDNA)

  1. In a 1.5mL microcentrifuge tube, add MilliQ H2O to final volume of 20µL, 2µL of restriction enzyme buffer, 2µL of plasmid DNA, and 0.25µL of each restriction enxyme.
  2. Incubate at 37oC for 1 hour.
  3. Heat kill restriction enzymes on a heat block at 80oC for 20 minutes.
  4. Store short-term on ice or long-term at -20oC.

Additional Protocols

Overexpression

  1. Inoculate two 5mL overnight cultures in LB media containing the appropriate antibiotic corresponding to the resistance of the plasmid backbone on which the gene is located; incubated at at 37oC in shaker.
  2. Transfer the two 5mL cultures into an 2000mL Erlenmeyer flask containing 500mL of LB media containing the same antibiotic.
  3. Measure and record initial read OD600 reading (Time = 0) blanking against the unincoulated LB media.
  4. Begin incubation at 37oC in shaker.
  5. Measure and record another OD600 reading 1 hour after (Time = 1) and continue record OD600 every 30 minutes (T + 0.5) until OD600 = 0.600 is reached.
  6. When OD600 has reached 0.600, aliquot out a 2mL sample and induce the 500mL culture (ie. if promoter is pLacI, induce with IPTG) and continue incubating in 37oC shaker.
  7. Aliquot 2mL samples and record the OD600 reading every hour for 3 hours following induction.
  8. To run SDS PAGE, centrifuge the samples at 13,000 rpm for 5 minutes and discard the supernatant. Resuspend the cell pellets with 100µL of 8M urea. Mix 10µL of the urea/cell sample with 5µL of 6X loading dye.

Maxiprep

  1. Grow up a 500mL overnight culture in LB media containing the appropriate antibiotic corresponding to the restance of the plasmid.
  2. Centrifuge the cells at 5000 rpm for 10 minutes, discard the supernatant, transfer pellet to a 50mL falcon tube, record the weight of the pellet, and store at -20oC. ( 1- 2.5g cell pellets are expected)
  3. Resuspend the cell pellet in 6mL Alkaline Lysis Soloution I (ALS1). Vortex carefully and slowly; may use a clean glass stir rod. Add 20&mirco;L of 1mg/mL RNase A.
  4. Add 1 mL of 10 mg/mL lysozyme (in 20mM Tris-HCl, pH 8.0)
  5. Incubate at room temperature for 10 minutes.
  6. Add 12mL of fresh ALS2, mix well, do not vortex, and incubate on ice for 10 minutes.
  7. Add 9mL of iceo cold ALS3, mix well, and incubate for 10 minutes on ice.
  8. Centrifuge at 4oC and 5000 rpm for 15 minutes.
  9. Decant supernatant filter within funnel into fresh 50mL centrigue tube.
  10. 1:1 phenol:chloroform extraction: In the fume hood, add 4mL of phenol/chloroform (1:1 -- 2mL of phenol + 2mL of chloroform), vortex for 15 seconds, centrifuge at 4000 rpm and 12oC for 4 minutes, and collect the upper aqueous phase. To the aqueous phase, add 4mL of chloroform, vortex for 15 seconds, centrifuge at 4000 rpm and 12oC for 4 minutes, and save the upper aqueous layer.
  11. Add 0.6 volumes of isopropanol to the saved aqueous layer and incubate on ice for 10 minutes. (Alternatively, precipitate overnight at -20oC)
  12. Centrifuge at 4oC and 5000 rpm for 15 minutes.
  13. Decant supernantant into a fresh falcon tube (can be saved for further plasmid DNA isolation)
  14. Wash DNA pellet with 2mL 70% ethanol; centrifuge at 4oC and 5000 rpm for 5 minutes.
  15. Air dry the DNA pellet; resuspend in 4mL 20mM Tris-HCl pH 8.0 by vortexing.
  16. Add 200µL 1mg/mL RNase A and incubate at room temperature overnight.
  17. Ethanol precipitation: Add 0.1 volumes of 3M Na-acetate pH 5.2, add 2 volumes of cold ethanol (-20oC), incubate 30 minutes on ice (or longer at -20oC).
  18. Centrifuge at 4oC and 4500 rpm for 15 minutes; carefully remove supernatant with 200µL pipette.
  19. Wash pellet with 750µL of 70% ethanol, centrifuge at 4oC and 4500 rpm for 2 minutes, remove supernatant, and air dry the pellet for 10 minutes.
  20. Resuspend the pellet in 200µL of MilliQ H2O (or TE).

Solutions:
ALS1: 50mM glucose, 25mM Tris-Cl, 10mM EDTA pH 8.0
ALS2: 0.2M NaOH, 1% (w/v) SDS
ALS3: 60mL of 5M K-acetate, 11.5mL glacial acetic acid, 28.5mL MilliQ H2O
RNase A: 1mg/mL in 20mM Tris-HCl, pH 8.0 Lysozyme: 10mg/mL in 20mM Tris-HCl, pH 8.0