Team:Edinburgh/Notebook/BRIDGE

From 2010.igem.org

Revision as of 13:10, 7 October 2010 by Macbereska (Talk | contribs)





BRIDGE





5/7/2010

  • sacB digest with EcoRI -band around kb (gel 1)

6/7/2010

  • sacB digest with EcoRi/PstI. Band also around 5 kb.

(gel 2).

7/7/2010

  • PCR of sacB to check insert. Used sacB tube 1 and 3.
  • Restriction digest of PCR with EcoRI and NotI.
  • (gel no 3)
  • lane 1- marker
  • lane 2, 3, 4 - sacB 1, 2 & 3 cut with NotI; band size: slightly bigger than 4 kb
  • Lane 5- PCR of LuxAB; band size around 1.5. kb
  • lane 6- Vector of sacB (pSB1C3, 2072bp, aroun 3kb with RFP) cut with NotI; band size around 1.5. kb
  • Lane 7- PCR of sacB with gene sepcific primers; band size around 1.5. kb
  • Trouble shooting: sacB cut with NotI give about 4kb, whereas cutting with EcoRI gives 5.5. kb... hmhmhm.

there should be 2 NotI sites on either side of the insert but we only get 1 band--> is there only 1 NotI site? Furthermore, PstI/EcoRI digests give only 1 band (same as cut only with EcoRI), so maybe there is no PstI/NotI site?

  • Purifying sacB from PCR product to start making BRIDGE- row F in the BOX 1.

9/7/2010

  • Making working solutions of primers from stock: 4ul of H20; 1 ul of stock solution
  • Primers: forward 72.3 C, revers- 77.6 C; length of the product: 2.6-2.7 kb

to do on Monday:

  • redo sacB- catR ligation
  • Run 5 ul of ligation on gel to check for large bands
  • redo RLS part transformations


12/7/2010

  • Transformants of luxAB-edi1 failed- probably smth wrong at the purification stage...
  • (gel no 4)
Lane 1 Lane 2 Lane 3 Lane 4 Lane 5 Lane 6
ladder luxAB-ediI digest luxAB-ediI ligation sacB digest catR digest sacB- catR lgation
expec. no of bands 2 1 or 3 1 1 1 band= to 4+5
  • If all failed- purification procedure failed
  • If 3 and 6 failed- ligation failed
  • If all fine then PCR/transformation failed

conclusion:...

  • 3 and 6 failed- ligation problem (not enough DNA, ligase).
  • Band 1- luxAB but no ediI (?)
  • Repeated digest (sacB with XbaI, catR with SpeI, LuxAB & EdiI with SpeI & SacI) and purification.
  • Set up ligations with 2ul ligase instead of 1 ul (1ul of H2O less). If this fails- perhaps only 2-3 h ligation ina RT (SpeI is set up in both digest- could be common cause)

13/7/2010

  • First, run PCR of catR-sacB ligation (use DNA?????' MK1- with sacBr1 (19.6.10); MK2- sacBr1(10)
  • Gel electrophoresis of: digested catR, digested sacB, ligated sacb-catR, digested LuxAB-ediI and ligated luxAB-ediI along with sacB-catR PCR

'(gel no 5'

Lane 1 Lane 2 Lane 3 Lane 4 Lane 5 Lane 6 Lane 7
ladder ediI digested LuxAB-ediI ligated luxAB-ediI ligated catR & sacB PCR 1 (MK1) PCR 2 (MK2)

'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAARGH!!!!!!!!!!!!!!!1'

  • Almost completely convinced it's the ligase... or me (MK). Officially taking myself off the project. xx
  • (Spotted 2 purified sacBs in the freezer... maybe try the original if this one fails...?)

'9/8/2010'

Gel with :

  • cat + sacB (PCR product) (6)
  • vector + cat + sacB (7) (both done by CF)

20/8/2010

  • Made plates variety of sucrose combinations--> 40 cml
  • 0%
  • 0.1%
  • 0.25%
  • 0.5%
  • 1.0%
  • Plated E6 miniprep, which should show some sucrose sensitivity (1plate at each concentration)
  • Control- E5, 1 plate at each concentration

30/8/2010

  • Primers have arrived for up and downstream sequences of TnaA region.

13/09/2010 Plane for week begininng 13th:

  • Amplify RFP with primers --> RBS-F2; YFP - R2 ---> to amplify RFP
  • Digest UP with SpeI and B-D with XbaI
  • Ligate UP to BRIDGE-DOWN
  • Digest RFP with XbaI and SpeI
  • Ligate UP and RFP
  • Ligate DOWN and RFP
  • Also- registry editing for RLS (definately dodgy sequence), LovTap
  • Justification of reseubmission
  • Look up absorption/emission rates and transmission through medium for Donal

20/9/2010

  • Achieved: cat/sacB- traA down ligation
  • Attempted: traA up- cat/sacB/down ligation; traA up- RFP ligation; RFP- traA down ligation/ ALL FAILED
  • Running: purified digest of:
     * cat/sacB + SpeI 
     * traA down- XbaI
     * traA up + SpeI
     * cat/sacB/down + XbaI
     * RFP + XbaI

and also running: UP- BRIDGE- DOWN ligation; UP - RFP ligation

Have: PCR of cat/sacB, RFP, BRIDGE-DOWN, traA up, traA down; ligation of BRIDGE-DOWN


gel no 7

Run gel:

Lane 1 Lane 2 Lane 3 Lane 4 Lane 5 Lane 6 Lane 7 Lane 8
Ladder Pure SacB Pure SacB & EcoRI sacB & catR PCR I15009 digest S284T PCR Product Purified 356K Purified 356R

25/10/10
Repetitive failure of purifications with both traditional method and kits, unsure what is going wrong. Have decided to tell Chris. Off to Firbush on Wednesday.

01/10/10
In my absence (at Firbush with the rest of the Biotechnologists) Chris has managed to construct the tnaA UP-cat-sacB-tnaA DOWN segment that we need for the first part of the BRIDGE protocol. I will continue to build the tnaA UP-RFP-tnaA DOWN segment.
Set up ligations of RFP-DOWN and UP-RFP, left in 16C incubator overnight.

02/10/10
Lab on a Saturday again, fun fun fun...
Retrieved and amplified ligations and ran on gel. UP-RFP appears to be significantly shorter than RFP-DOWN and indeed shorter than it ought to be (should be about 2kb, is only around 1.5kb).
Purified both products, then digested RFP-DOWN with XbaI. (Used 2hour incubation time to write presentation for Wednesday).
Set up ligation of UP with RFP-DOWN and left in incubator overnight.

03/10/10
Bus to Darwin for 11:20am; enter Darwin; lift to 8th floor; retrieve ligations from waterbath in cold room; walk down to 7th floor; put ligation in freezer; lift to ground floor; leave Darwin; catch 11:40am bus back to central.

04/10/10
PCR of ligation of UP-RFP-DOWN. Made and ran gel along with purified PCRs from Saturday, just in case they're still not working.
They worked! The purifications were perfect. There is a band about the size of UP-RFP-DOWN in it's lane, but it's quite faint. I will probably repeat the PCR with a lower annealing temperature (around 50) this afternoon. I suspect the UP primers do not anneal properly above 54C.