Team:Imperial College London/Modelling/Output/Detailed Description

From 2010.igem.org

Revision as of 16:48, 20 October 2010 by Pete fab (Talk | contribs)

Temporary sub-menu:

Objectives; Detailed Description; Parameters & Constants; Results & Conclusion;Download MatLab Files;

Output Amplification Model

Detailed Description

1. Model based on Law of Mass Action

During a meeting with our advisors, it was noted that our initial models (which had assumed that our system obeyed Michaelis-Menten kinetics) were wrong as the assumptions made by Michaelis-Menten approximation were not obeyed by our system. Click on the button below to learn more about our models based on Michaelis-Menten kinetics.

Abandoned Initial Attempts

Contents

Model based on Michaelis Menten Kinetics (Weeks 4 and 5)


HIV1

File:Slide2.JPG
At each stage of amplification a distinct protease is being used

Equations

  • <math>\dot{m}=k_{to} - d_{to}m\,\!</math>


  • <math>\dot{p_h} = k_hm - d_hp_h</math>


  • <math>\dot{p_t} = k_tp_h - d_tp_t</math>


  • <math>\dot{p_g} = k_gp_t - d_gp_g</math>

Parameters

  • <math>k_{to}\mbox{...transcription rate of HIV1}</math>
  • <math>d_{to}\mbox{...degradation rate of mRNA coding for HIV1}</math>
  • <math>k_h\mbox{...translation rate of HIV1}</math>
  • <math>d_h\mbox{...degradation rate of HIV1}</math>
  • <math>k_t\mbox{...production rate of TEV by HIV1}</math>
  • <math>d_t\mbox{...degradation rate of TEV}</math>
  • <math>k_g\mbox{...production rate of GFP by TEB}</math>
  • <math>d_g\mbox{...degradation rate of GFP}</math>



TEV

File:TEV.jpg
TEV is used at both stages of amplification

Equations


  • <math>\dot{m} = k_{to} - d_{to}m</math>


  • <math>\dot{p_t} = k_tm - d_tp_t</math>


  • <math>\dot{p_{ts}} = k_{ts}p_t - d_{ts}p_{ts}</math>


  • <math>\dot{p_g} = k_{g1}p_t + k_{g2}p_{ts} - d_gp_g</math>

Parameters

  • <math>k_{to}\mbox{...rate of transcription by TEV}</math>
  • <math>d_{to}\mbox{...degradation rate of mRNA coding for TEV}</math>
  • <math>k_t\mbox{...rate of translation of TEV}</math>
  • <math>d_t\mbox{...degradation rate of TEV}</math>
  • <math>k_{ts}\mbox{...rate of production (fusion) of split TEV}</math>
  • <math>d_{ts}\mbox{...degradation rate of split TEV}</math>
  • <math>k_{g1}\mbox{...rate of production of GFP by full TEV}</math>
  • <math>k_{g2}\mbox{...rate of production of GFP by split TEV}</math>
  • <math>d_g\mbox{...degradation rate of GFP}</math>

Improved Model which accounts for enzyme reactions (28/07/2010)



TEV

File:TEV.jpg
TEV is used at both stages of amplification

Equations

  • 1. Production of TEV from transcription

<math>\dot{p_t} = s_t - d_tp_t</math>

<math>s_t = \dfrac{k_tk_{to}}{d_{to}}</math>


  • 2. Production of split TEV from transcription

<math>\dot{p_{st}} = s_{st} - d_{st}p_{st}</math>


  • 3. Production of split GFP from transcription

<math>\dot{p_{sg}} = s_{sg} - d_{sg}p_{sg}</math>


  • 4. Production of fused split TEV catalysed by TEV (1)

<math>\dot{p_{ts}} = \dfrac{V_{max,t}[p_{st}]}{K_{m,ts} + [p_{st}]} - d_{ts}p_{ts}</math>


  • 5. Production of GFP catalysed by TEV (1) and fused split TEV (4)

<math>\dot{p_g} = \dfrac{V_{max,tg}[p_{sg}]}{K_{m,tg} + [p_{sg}]} + \dfrac{V_{max,tsg}[p_{sg}]}{K_{m,tsg} + [p_{sg}]} - d_gp_g</math>



Implementation in Matlab
The Matlab code for the different stages of amplification and diagrams can be found [http://www.openwetware.org/wiki/Image:Modelling.docx here].

Kinetic constants

GFP TEV split TEV split GFP
<math>Km</math> and <math>k_{cat}</math> - <math>K_m = 0.061</math>; <math>k_{cat} = 0.16</math>; [http://peds.oxfordjournals.org/cgi/reprint/14/12/993] 40% of value for TEV -
Half-life or degradation rate Half-life in B.sub approximately 1.5 hours  ?  ? Half-life shorter than GFP
Production rate in B.sub  ?  ?  ?  ?

Conclusion

We were not able to obtain all the necessary constants. Hence, we decided to make educated guesses about possible relative values between the constants as well as varying them and observing the change in output.

As the result, we concluded that the amplification happens at each amplification level proposed. The magnitude of amplification varies depending on the constants. There is not much difference between using TEV or HIV1.

References

  1. Kapust R. et al (2001) Tobacco etch virus protease: mechanism of autolysis and rational design of stable mutants with wild-type catalytic proficiency. Protein Engineering. [Online] 14(12), 993-1000. Available from: http://peds.oxfordjournals.org/cgi/reprint/14/12/993 [Accessed 28th July 2010]



In order to be able to use Michaelis Menten kinetics, there a lot of assumptions that have to be made. A few of these assumptions were not met by our system:

  • Vmax is proportional to the overall concentration of the enzyme.

Since we are continuously producing enzyme, Vmax will change. Therefore the conservation E0 = E + ES does not hold for our system.

  • Substrate >> Enzyme

We are producing both substrate and enzyme, so we have approximately the same amount of substrate and enzyme.

  • Enzyme affinity to the substrate has to be high.

Therefore, the model above is not representative of the enzymatic reaction. As we cannot use the Michaelis-Menten model we will have to solve from first principle (which involves writing down all of the biochemical equations and solving for these in Matlab).

Change of output

During our literature research, we came across a better output, so we abandoned the idea of using GFP as an output. Instead, we are using catechol. An enzyme, dioxygenase, will be acting on the catechol, which will then result in a coloured output. Catechol will be added to the bacteria manually (i.e. the bacteria will not produce catechol). Hence, in our models dioxygenase will be treated as an output as this enzyme is the only activator of catechol in our system. This means that the change of catechol into its colourful form is dependent on the dioxygenase concentration.


2. Model preA: Simple production of dioxygenase

IC Simple production.JPG
Transcription and translation
(simple production) of dioxygenase.

This model includes transcription and translation of the dioxygenase. It does not involve any amplification steps. It is our control model against which we will be comparing the results of other models.

3. Model A: Activation of Dioxygenase by TEV enzyme

IC 1-step amplification.JPG
1-step amplification.


This model consists of the basic enzymatic reaction:

Equations showing enzymatic reaction between TEV and split Dioxygenase

This is a simple enzymatic reaction, where TEV is the enzyme, Dioxygenase the product and split Dioxygenase the substrate. Choosing k1, k2, k3 as reaction constants, the reaction can be rewritten in these four sub-equations:

PDEs describing the reaction presented above

These four equations were implemented in Matlab, using a built-in function (ode45) which solves ordinary differential equations.

Implementation in TinkerCell

Another approach to model the amplification module would be to implement it in a program such as TinkerCell (or CellDesigner). This would be useful to check whether the Matlab model works.

IC Tinkercell Model A.PNG
Model A implemented in TinkerCell.

4. Model B: Activation of Dioxygenase by TEV or activated split TEV enzyme

IC 2-step amplification.JPG
2-step amplification.

This version includes the following features:

  • 2 amplification steps (TEV and split TEV)
  • Split TEV is specified to have a and b parts
  • TEVa is forbidden to interact with TEVa (though in reality there could be some affinity between the two). Same for the interaction between Tevb and Tevb
  • Both TEV and TEVs are allowed to activate dioxygenase
  • Dioxygenase is assumed to be active as a monomer
  • Activate split TEV (TEVs) is not allowed to activate sTEVa or sTEVb (this kind of interaction is accounted for in the next model version)
  • This model does not include any specific terms for time delays


5. Model C: Further improvements

This model has not been implemented because of the conclusions that we reached from Models A and B. It would include the following features:

  • activated split TEV (TEVs) is allowed to activate not only sD but sTEVa and sTEVb