Team:Kyoto/Project/Goal C

From 2010.igem.org

(Difference between revisions)
(Discussion)
Line 1: Line 1:
 +
{{:Team:Kyoto/Header}}
 +
==Goal C: Characterization of the anti-killer gene==
 +
===Introduction===
 +
We selected SΔTMD1 as anti-killer gene of Lysis box.
 +
Lysis cassette encodes S gene, R gene and so on and the transmembrane domein 1(TMD1) of  this S gene is essential for the function of lysis cassette as killer-gene.
 +
So SΔTMD1, which is a S mutant with TMD1 deleted, dominant-negatively inhibits Lysis cassette.(check [[Team:Kyoto/LearnMore#Lysis Cassette|Learn more]])
 +
That is why we selected SΔTMD1 as anti-killer gene.
 +
 +
Then, we checked if SΔTMD1 prevent Lysis cassette from causing the cell death.
 +
To research this function of S&Delta;TMD1, we used the E.coli transformed with both these genes( <partinfo>BBa_K358021</partinfo>).
 +
Because E.coli is immediately dead if killer-gene is constitutively expressed, we made lysis cassette regulated by lac promoter. The E.coli were grown in the medium without IPTG, and after there were enough E.coli, they were cultured in the one with IPTG to express Lysis cassette. After that, we checked, by measuring the absorbance (A550), if E.coli were alive due to anti-killer gene, S&Delta;TMD1 expressed constitutively.
 +
 +
===Method===
 +
====Bacterial strains====
 +
We used four types of E. coli, E. coli KRX transformed with <partinfo>BBa_K358021</partinfo>,  KRX transformed with <partinfo>BBa_K358022</partinfo> KRX transformed with <partinfo>BBa_K358024</partinfo> and KPX transfomed with  <partinfo>BBa_K358019</partinfo>.
 +
 +
====Construct====
 +
[[Image:KyotoFigC001.png|450px]][[Image:KyotoFigC003.png|400px]][[Image:KyotoFigC002.png|450px]][[Image:KyotoFigC004.png|400px]]
 +
 +
{{clear}}
 +
*<partinfo>BBa_K358021</partinfo>:Anti-killergene is induced constitutively and killergene is regulated by lactose promoter.
 +
It was used in experiment 1
 +
*<partinfo>BBa_K358022</partinfo>:lacP + SΔTMD1RRz, TMD1 is deleted from lysis cassette[SRRz].
 +
It was used in experiment 2
 +
*<partinfo>BBa_K358024</partinfo>:This part is the same to BBa_K358021, except for its constitutive promoter[BBa_J23101]. So, this part also induces constitutively SΔTMD1 gene, the anti-killer gene, and lambda lysis cassette[SRRz], the killer gene, is regulated by lacP.
 +
It was used in the additional experiment, which is not finished.
 +
*<partinfo>BBa_K358019</partinfo>:Lysis cassette regulated by lacP, Lysis cassette[SRRz] is regulated by lactose promoter. Activating lactose promoter and expressing SRRz gene, it causes the cell lysis. So, lactose promoter must be repressed when transform this part.
 +
It was used in experiment 2
 +
 +
===Mesurement===
 +
====Experiment 1===
 +
We pick up three colonies from each plate, and cultivate them in the supplemented M9 medium overnight, about 16 hours. The overnight cultures were diluted to 0.1~0.11 in pre-warmed fresh the supplemented M9 medium. we measure A550 of the culture containing various IPTG at about 100 minute interval.
 +
====Experiment 2===
 +
We pick up three colonies from each plate, and cultivate them in the supplemented M9 medium for a night, overnight. The overnight cultures were diluted to 0.1~0.11mM in pre-warmed fresh the supplemented M9 medium. 18h later, we measure A550 of the culture containing 0mM or 1mM IPTG.
 +
 +
===Result===
 +
====Experiment 1: Function check of S&Delta;TMD1====
 +
[[image:GoalC fig1.png|450px|Fig.1|right|thumb|Fig.1.the result of function check of S&Delta;TMD1]]
 +
[[image:GoalC fig2.png|450px|right|thumb|Fig.2.Comparison]]
 +
 +
We measured the cell number of E.coli transformed with <partinfo>BBa_K358021</partinfo> at several time after induction by adding several concentration IPTG.
 +
The result is below(Fig.1).
 +
This result showed that in the medium with more than 0.03mM IPTG, the number of E. coli is decreasing at a certain point.
 +
It demonstrated that In at least more than 0.03mM IPTG, S&Delta;TMD1 can't inhibit lysis cassette completly.
 +
Then, we measured the cell number of E.coli transformed with <partinfo>BBa_K358019</partinfo> in the same way, and compared the result of E.coli transformed with <partinfo>BBa_K358021</partinfo> with that of E.coli transformed with (<partinfo>BBa_K358019</partinfo>) to check how S&Delta;TMD1 inhibited lysis cassette(Fig.2).
 +
In Fig.2, LacS is E.coli transformed with <partinfo>BBa_K358019</partinfo>, CTLS is the one transformed with <partinfo>BBa_K358021</partinfo>.
 +
From this result, we knew in more than 0.5mM IPTG both Lacs and CTLA were decreasing in the number at a certain point, or CTLA was a little delayed decreaing in the number.
 +
This demonstrated that S&Delta;TMD1 can't correctly inhibit lysis cassette.
 +
So, we doubted whether S&Delta;TMD1 really functioned as anti-killer gene.
 +
Although  S&Delta;TMD1 has no TMD1 of S gene, S&Delta;TMD1 couldn't show the function as anti-killer gene.
 +
====Experiment 2:====
 +
[[image:GoalC fig3-2.png|450px|right|thumb|Fig.3.Lysis cassette &Delta;TMD1]]
 +
Then, in order to check if TMD1 of S gene is essential for this killer gene, we measured the cell number of E.coli transformed with Lysis cassette &Delta;TMD1, which does not have TMD1 of S gene and that is, encodes also S&Delta;TMD1<partinfo>BBa_K358021</partinfo>,
 +
This result is below(Fig.3).
 +
From the result, we knew if Lysis cassette &Delta;TMD1 is induced, the cell death was not caused.
 +
It proved that S&Delta ;TMD1 cannot function as killer gene and TMD1 is essential for this killer gene, lysis cassette.
 +
===Discussion===
===Discussion===
====S&Delta;TMD1 cannot inhibit Lysis cassette completly====
====S&Delta;TMD1 cannot inhibit Lysis cassette completly====
Line 8: Line 65:
*S&DeltaTMD1 is weaker anti-killer gene than we expected.
*S&DeltaTMD1 is weaker anti-killer gene than we expected.
*less S&Delta;TMD1 proteins or more lysis cassette proteins was expressed than we expected.
*less S&Delta;TMD1 proteins or more lysis cassette proteins was expressed than we expected.
-
=====Reason1:S&Delta;TMD1 in the plasmid did not worked correctly.=====
+
====Reason1:S&Delta;TMD1 in the plasmid did not worked correctly.====
-
To make sure the reason, we sequenced BBa_K358021 we used.  
+
we sequenced BBa_K358021 we used.  
It’s result showed that this construct is inserted into the plasmid  correctly, which demonstrated  that S&Delta;TMD1 worked correctly.
It’s result showed that this construct is inserted into the plasmid  correctly, which demonstrated  that S&Delta;TMD1 worked correctly.
So, first reason was not right.
So, first reason was not right.
-
=====Reason2:S&DeltaTMD1 is weaker anti-killer gene than we expected.=====
+
====Reason2:S&DeltaTMD1 is weaker anti-killer gene than we expected.====
-
As anti-killer gene against lysis cassette, there are two genes, S107 and S&Delta;TMD1(Learn more).
+
As anti-killer gene against lysis cassette, there are two genes, S107 and S&Delta;TMD1.
-
S107 is anti-killer gene, but because it has essential TMD1 of S for function of this killer gene, it’s function as anti-killer gene is weak compared with S&Delta;TMD1, which does not have TMD1 of (Learn more).
+
S107 is anti-killer gene, but because it has essential TMD1 of S for function of this killer gene, it’s function as anti-killer gene is weak compared with S&Delta;TMD1, which does not have TMD1 of S <sup>[1]</sup>.
-
So, we thought that S&Delta;TMD1 is a strong anti-killer gene, but from result of experiment 1 we doubted S&Delta;TMD1 was  a strong anti-killer gene. However, I could not make sure the reason.
+
So, we thought that S&Delta;TMD1 is a strong anti-killer gene, but the result did not support this.
-
=====Reason3:less S&Delta;TMD1 proteins or more lysis cassette proteins was expressed than we expected.=====
+
====Reason3:less S&Delta;TMD1 proteins or more lysis cassette proteins was expressed than we expected.====
 +
Second, because less S&Delta;TMD1 proteins or more lysis cassette proteins was expressed than we expected.
As a report (Ref.2) says, it is necessary for the inhibition of lysis cassette that there are at least 4.73 times more S107, anti-killer gene than lysis cassette proteins.  
As a report (Ref.2) says, it is necessary for the inhibition of lysis cassette that there are at least 4.73 times more S107, anti-killer gene than lysis cassette proteins.  
S gene encodes not only S105 but also S107.
S gene encodes not only S105 but also S107.

Revision as of 13:24, 27 October 2010

Contents

Goal C: Characterization of the anti-killer gene

Introduction

We selected SΔTMD1 as anti-killer gene of Lysis box. Lysis cassette encodes S gene, R gene and so on and the transmembrane domein 1(TMD1) of this S gene is essential for the function of lysis cassette as killer-gene. So SΔTMD1, which is a S mutant with TMD1 deleted, dominant-negatively inhibits Lysis cassette.(check Learn more) That is why we selected SΔTMD1 as anti-killer gene.

Then, we checked if SΔTMD1 prevent Lysis cassette from causing the cell death. To research this function of SΔTMD1, we used the E.coli transformed with both these genes( <partinfo>BBa_K358021</partinfo>). Because E.coli is immediately dead if killer-gene is constitutively expressed, we made lysis cassette regulated by lac promoter. The E.coli were grown in the medium without IPTG, and after there were enough E.coli, they were cultured in the one with IPTG to express Lysis cassette. After that, we checked, by measuring the absorbance (A550), if E.coli were alive due to anti-killer gene, SΔTMD1 expressed constitutively.

Method

Bacterial strains

We used four types of E. coli, E. coli KRX transformed with <partinfo>BBa_K358021</partinfo>, KRX transformed with <partinfo>BBa_K358022</partinfo> KRX transformed with <partinfo>BBa_K358024</partinfo> and KPX transfomed with <partinfo>BBa_K358019</partinfo>.

Construct

KyotoFigC001.pngKyotoFigC003.pngKyotoFigC002.pngKyotoFigC004.png

  • <partinfo>BBa_K358021</partinfo>:Anti-killergene is induced constitutively and killergene is regulated by lactose promoter.

It was used in experiment 1

  • <partinfo>BBa_K358022</partinfo>:lacP + SΔTMD1RRz, TMD1 is deleted from lysis cassette[SRRz].

It was used in experiment 2

  • <partinfo>BBa_K358024</partinfo>:This part is the same to BBa_K358021, except for its constitutive promoter[BBa_J23101]. So, this part also induces constitutively SΔTMD1 gene, the anti-killer gene, and lambda lysis cassette[SRRz], the killer gene, is regulated by lacP.

It was used in the additional experiment, which is not finished.

  • <partinfo>BBa_K358019</partinfo>:Lysis cassette regulated by lacP, Lysis cassette[SRRz] is regulated by lactose promoter. Activating lactose promoter and expressing SRRz gene, it causes the cell lysis. So, lactose promoter must be repressed when transform this part.

It was used in experiment 2

Mesurement

=Experiment 1

We pick up three colonies from each plate, and cultivate them in the supplemented M9 medium overnight, about 16 hours. The overnight cultures were diluted to 0.1~0.11 in pre-warmed fresh the supplemented M9 medium. we measure A550 of the culture containing various IPTG at about 100 minute interval.

=Experiment 2

We pick up three colonies from each plate, and cultivate them in the supplemented M9 medium for a night, overnight. The overnight cultures were diluted to 0.1~0.11mM in pre-warmed fresh the supplemented M9 medium. 18h later, we measure A550 of the culture containing 0mM or 1mM IPTG.

Result

Experiment 1: Function check of SΔTMD1

Fig.1.the result of function check of SΔTMD1
Fig.2.Comparison

We measured the cell number of E.coli transformed with <partinfo>BBa_K358021</partinfo> at several time after induction by adding several concentration IPTG. The result is below(Fig.1). This result showed that in the medium with more than 0.03mM IPTG, the number of E. coli is decreasing at a certain point. It demonstrated that In at least more than 0.03mM IPTG, SΔTMD1 can't inhibit lysis cassette completly. Then, we measured the cell number of E.coli transformed with <partinfo>BBa_K358019</partinfo> in the same way, and compared the result of E.coli transformed with <partinfo>BBa_K358021</partinfo> with that of E.coli transformed with (<partinfo>BBa_K358019</partinfo>) to check how SΔTMD1 inhibited lysis cassette(Fig.2). In Fig.2, LacS is E.coli transformed with <partinfo>BBa_K358019</partinfo>, CTLS is the one transformed with <partinfo>BBa_K358021</partinfo>. From this result, we knew in more than 0.5mM IPTG both Lacs and CTLA were decreasing in the number at a certain point, or CTLA was a little delayed decreaing in the number. This demonstrated that SΔTMD1 can't correctly inhibit lysis cassette. So, we doubted whether SΔTMD1 really functioned as anti-killer gene. Although SΔTMD1 has no TMD1 of S gene, SΔTMD1 couldn't show the function as anti-killer gene.

Experiment 2:

Fig.3.Lysis cassette ΔTMD1

Then, in order to check if TMD1 of S gene is essential for this killer gene, we measured the cell number of E.coli transformed with Lysis cassette ΔTMD1, which does not have TMD1 of S gene and that is, encodes also SΔTMD1<partinfo>BBa_K358021</partinfo>, This result is below(Fig.3). From the result, we knew if Lysis cassette ΔTMD1 is induced, the cell death was not caused. It proved that S&Delta ;TMD1 cannot function as killer gene and TMD1 is essential for this killer gene, lysis cassette.

Discussion

SΔTMD1 cannot inhibit Lysis cassette completly

These results showed that SΔTMD1 cannot inhibit completely Lysis cassette. This results can't supported a report on lysis (Ref.1) which says that SΔTMD1 without TMD1 dominant-negatively inhibit lysis cassette. Why did we get the result against that report? Probably, there were three reasons below, we thought.

  • SΔTMD1 in the plasmid did not worked correctly.
  • S&DeltaTMD1 is weaker anti-killer gene than we expected.
  • less SΔTMD1 proteins or more lysis cassette proteins was expressed than we expected.

Reason1:SΔTMD1 in the plasmid did not worked correctly.

we sequenced BBa_K358021 we used. It’s result showed that this construct is inserted into the plasmid correctly, which demonstrated that SΔTMD1 worked correctly. So, first reason was not right.

Reason2:S&DeltaTMD1 is weaker anti-killer gene than we expected.

As anti-killer gene against lysis cassette, there are two genes, S107 and SΔTMD1. S107 is anti-killer gene, but because it has essential TMD1 of S for function of this killer gene, it’s function as anti-killer gene is weak compared with SΔTMD1, which does not have TMD1 of S [1]. So, we thought that SΔTMD1 is a strong anti-killer gene, but the result did not support this.

Reason3:less SΔTMD1 proteins or more lysis cassette proteins was expressed than we expected.

Second, because less SΔTMD1 proteins or more lysis cassette proteins was expressed than we expected. As a report (Ref.2) says, it is necessary for the inhibition of lysis cassette that there are at least 4.73 times more S107, anti-killer gene than lysis cassette proteins. S gene encodes not only S105 but also S107. S107 is anti-killer gene, but because it has essential TMD1 of S for function of this killer gene, it’s function as anti-killer gene is weak compared with SΔTMD1, which does not have TMD1 of S [1]. So SΔTMD1 should have inhibited lysis cassette if at least 4.73 times more SΔTMD1 than lysis cassette were expressed. Actually, we selected <partinfo>R0011</partinfo> and <partinfo>J23105</partinfo> as each promoter of lysis cassette and SΔTMD1 so that the activity of the promoter of SΔTMD1 is at least five times higher than that of lysis cassette. However, S&Delta TMD1; couldn’t inhibit lysis cassette. Then, in order to solve this problem we changed the promoter of SΔTMD1 to stronger one, and now, are checking the function of SΔTMD1. Surely, this result will help us discuss why SΔTMD1 couldn’t function as we expected. You should expect it!!