Method

Protocol:

1.Selected genes to be reported are incubated overnight in an LB liquid culture at 37oC and 180-200rpm. This makes sure they are fresh in the morning. Positive and negative controls are also needed.

2.Overnight liquid culture is diluted to OD600 of 0.1, Theophylline is added at concentrations ranging from 0.01mM to 20mM, and the mix incubated for 2-2.5 hours.

3.Measurement of OD at 2 hours: For each used well in the 96-well plate: Take 200uL from the liquid (make sure you pipette this step well) and put it in a cuvette to read the OD600. Note down the OD600 ["OD at 2 hours"], then take the liquid in the cuvette and put it in the right place in the 96-well plate.

4.Measurement of fluorescence: Continuous measurement of fluorescence with the excitation/emission wavelengths 488/511nm for 2 hours, with one fluorescence data point every 2 minutes.

5.Measurement of OD at 4 hours: For each used well in the 96-well plate: Take the liquid from the well and put it in the cuvette to measure the OD ["OD at 4 hours"].

Reporting Assay

Fig.1,fig.3,fig.5,and fig.7 are the original charts of the experiment.N line and NT line are control.N line stands for the cell which sequence doesn't have promoter.NT line stands for the cell which sequence doesn't have promoter but added 0.1mM theophylline.N line is compared with 0&mμ;M and it shows that even though the sequence doesn't have promoter it still have little fluorescence so we use it to modify the instrument errors. 0μM line which sequences have promoter but doesn’t added theophylline and it still has little fluorescence because mRNA is leaky.And we use this line to find out what’s the degree of mRNA leaky.NT line shows that although it doesn’t have promoter it still has little fluorescence.We added theophylline by a solute DMSO and we use this line to modify the other lines which have added different concentration of theophylline. Fig.2,fig.4,fig.6,and fig.8 are charts which have been modified by the control,N line and NT line.