Team:UTDallas/Project ProjectOverview

From 2010.igem.org

(Difference between revisions)

Revision as of 02:30, 28 October 2010

Project Overview	Introduction	References

Project Overview

Millions of gallons of toxic petroleum are released into the ocean each year as a result of accidents such as oil spills or natural geological seepage.

Crude oil is a complex mixture of hydrocarbons consisting largely of n-alkane and aromatic hydrocarbons. Saturated hydrocarbons with linear or branched chains comprise the alkane series, which includes paraffinic hydrocarbons. Unsaturated hydrocarbons with benzene rings comprise the aromatic series, which includes the BTEX compounds.

The World Water Assessment Program, the UN’s flagship water protection initiative, describes a host of health risks associated with these chemicals, some of which are enumerated in the table below (adapted from WWAP brochure)

Table

While petroleum constituents are generally found around industry, nitrates are a common ingredient in fertilizers, whose use is widespread in agricultural practice. Nutrient-rich runoff enriches water sources such as lakes, rivers and aquifers with nitrates in a process called eutrophication. This facilitates the onset of algal blooms that deprive the native organisms of oxygen and essential nutrients. Afflicted water sources are difficult and expensive to restore and the process could further harm the wildlife.

Due to stable, unreactive chemical structures, many of the aforementioned chemicals are persistent contaminants that circulate through the environment, thus polluting usable water supplies and marine ecosystems for extended periods of time. In fact, crude residues from the 2002 Prestige spill are still, 8 years later, encountered along Glacian shores. The need to control and mitigate the circulation of such chemicals is therefore both eminent and urgent. To that end, the UT Dallas iGEM team is developing novel, modular biosensors that enable cheap, on-site detection of aromatics, nitrates/nitrites and alkanes in low concentrations using an Escherichia coli chassis.

The aromatics sensor will build on the previous work of the Michigan 2009 and Glasgow 2007 teams. Team Glasgow produced a successfully characterized fusion of the pR constitutive promoter and XylR transcription factor of the pu promoter. Team Michigan produced a fusion of the pu promoter and GFP, but failed to characterize the construct. We successfully characterized the function of the Michigan 2009 construct and assess its sensing capabilities in the presence of aromatics.

The nitrate/nitrite sensor will build on parts submitted by the Edinburgh 2009 team. This includes a fusion of the nitrate/nitrite-inducible pYeaR promoter and GFP. We successfully characterized the function construct with a GFP reporter system and with a variety of nitrate/nitrite compounds, which was not included in the work by Edinburgh.

The alkane sensor will include components of the alkane metabolic pathway of Pseudomonas putida OCT. The promoter region pAlkB drives the transcription of the alk gene cluster. AlkS, its transcription factor, is encoded by the alkS gene. We will perform a fusion of pAlkB to a fluorescent protein part to make a reporter construct. A plasmid containing alkS was kindly provided by Dr. Jan Roelof van der Meer of the University of Lausanne in Switzerland. AlkS binds to n-alkanes to form a dimer that positively regulates the pAlkB promoter to drive the expression of fluorescent protein. The two plasmids containing the promoter/fluorescent protein fusion and the AlkS transcription factor will be co-transformed into DH5a to characterize sensing capabilities.

Retrieved from "http://2010.igem.org/Team:UTDallas/Project_ProjectOverview"

@@ Line 9: / Line 9: @@
 == Project Overview ==
-The University of Texas, Dallas iGEM team will develop a new generation of biosensors for contaminants. These sensors will be engineered in bacteria and will be able to combine heterogeneous inputs, process the incoming information dynamically, and release accordingly a reporter.
+Millions of gallons of toxic petroleum are released into the ocean each year as a result of accidents such as oil spills or natural geological seepage.
+Crude oil is a complex mixture of hydrocarbons consisting largely of n-alkane and aromatic hydrocarbons. Saturated hydrocarbons with linear or branched chains comprise the alkane series, which includes paraffinic hydrocarbons. Unsaturated hydrocarbons with benzene rings comprise the aromatic series, which includes the BTEX compounds.
-We are mainly interested in producing biosensors for use in disasters such as the recent Deepwater Horizon Spill. Even though the rig was recently closed, the World Water Assessment Program (WWAP) warns of health risks associated with the presence and circulation of such pollutants. Therefore, there is an urgent need for cheap and reliable contaminant sensors. Chemical sensors can have wide-ranging environmental applications, but can be very expensive depending on the technology. On the other hand, bacterial biosensors offer a cheaper alternative to existing systems. We will use Synthetic biology to implement gene circuits responsible for combinatorial logic, feedback and noise-reduction functions in a similar manner to electronic devices.We will employ molecular biology techniques to develop new and modify existing BioBricks that respond to the following contaminants:
+The World Water Assessment Program, the UN’s flagship water protection initiative, describes a host of health risks associated with these chemicals, some of which are enumerated in the table below (adapted from WWAP brochure)
-''Crude oil:'' Commercial oil spills release millions of gallons of toxic chemicals into the ocean, which severely implicate wildlife and their habitats. These chemicals comprise several oil fractions including light ends, naphtha, kerosene, fuel oil, PGO and residual oil fractions. Crude oil is a complex mixture of hydrocarbons consisting primarily of alkanes, cycloalkanes and aromatic hydrocarbons. The alkane series are saturated hydrocarbons with linear or branched chains. The cycloalkane series are saturated hydrocarbons that include non-aromatic rings. The aromatic series are unsaturated hydrocarbons that include six-carbon benzene rings. We will engineer novel BioBricks to convert straight-chain alkanes into aldehydes. Existing parts sensitive to aldehydes would then indicate the presence of alkanes.  We will also modify parts submitted by the Glasgow 2007 team, which are inducible by aromatic compounds benzene, toluene, ethylbenzene and xylene.
+Table
-''Nitrates:'' Nitrates are a common ingredient in fertilizers, whose use is widespread and often excessive.  Nutrient-rich runoff enriches water sources such as lakes, rivers and aquifers with the nitrates in a process called eutrophication, which facilitates the onset of algal blooms that deprive the water of oxygen and essential nutrients. Afflicted water sources are difficult and expensive to cleanse and the process would severely implicate the native wildlife.
+While petroleum constituents are generally found around industry, nitrates are a common ingredient in fertilizers, whose use is widespread in agricultural practice.  Nutrient-rich runoff enriches water sources such as lakes, rivers and aquifers with nitrates in a process called eutrophication. This facilitates the onset of algal blooms that deprive the native organisms of oxygen and essential nutrients. Afflicted water sources are difficult and expensive to restore and the process could further harm the wildlife.
-We have several options for the sensor’s output. One possibility is for each contaminant sensor to activate the transcription of a pigment protein. For example, aromatics could produce red, nitrates purple, and alkanes green. When used in conditions with multiple contaminants, this would produce a specific color. A second possibility is using logic functions in a gene network implementation. For example, the presence of aromatics OR nitrates OR alkanes produces green. We will explore both options.
+Due to stable, unreactive chemical structures, many of the aforementioned chemicals are persistent contaminants that circulate through the environment, thus polluting usable water supplies and marine ecosystems for extended periods of time. In fact, crude residues from the 2002 Prestige spill are still, 8 years later, encountered along Glacian shores. The need to control and mitigate the circulation of such chemicals is therefore both eminent and urgent. To that end, the UT Dallas iGEM team is developing novel, modular biosensors that enable cheap, on-site detection of aromatics, nitrates/nitrites and alkanes in low concentrations using an Escherichia coli chassis.
+The aromatics sensor will build on the previous work of the Michigan 2009 and Glasgow 2007 teams. Team Glasgow produced a successfully characterized fusion of the pR constitutive promoter and XylR transcription factor of the pu promoter. Team Michigan produced a fusion of the pu promoter and GFP, but failed to characterize the construct. We successfully characterized the function of the Michigan 2009 construct and assess its sensing capabilities in the presence of aromatics.
+The nitrate/nitrite sensor will build on parts submitted by the Edinburgh 2009 team. This includes a fusion of the nitrate/nitrite-inducible pYeaR promoter and GFP. We successfully characterized the function construct with a GFP reporter system and with a variety of nitrate/nitrite compounds, which was not included in the work by Edinburgh.
+The alkane sensor will include components of the alkane metabolic pathway of Pseudomonas putida OCT. The promoter region pAlkB drives the transcription of the alk gene cluster. AlkS, its transcription factor, is encoded by the alkS gene. We will perform a fusion of pAlkB to a fluorescent protein part to make a reporter construct. A plasmid containing alkS was kindly provided by Dr. Jan Roelof van der Meer of the University of Lausanne in Switzerland. AlkS binds to n-alkanes to form a dimer that positively regulates the pAlkB promoter to drive the expression of fluorescent protein. The two plasmids containing the promoter/fluorescent protein fusion and the AlkS transcription factor will be co-transformed into DH5a to characterize sensing capabilities.