Team:Gothenburg-Sweden/Lab Note

From 2010.igem.org

(Difference between revisions)

Revision as of 13:45, 1 October 2010

Chalmers University of Technology

Team

Introduction CHALMERS Supervisors Students

FUSS

What's all about? Background Protein Fusion Methods Preliminary Results

Preliminary Study

Fluorescent Proteins:
Green Fluorescent Protein (read more)

Plasmid backbone:
pSP-GM1 (read more)

SNF1 (modified subunits):
Snf1 (alfa), Snf4 (gamma) (read more)

FP positions:
N-terminal alfa with N-terminal gamma, N-terminal gamma with C-terminal gamma (read more)

Primer design:
Fusion primers with restiriction enzyme sites included at very ends, each annealing part was desinged with an melting temperature of around 60 C (read more)

Lab work by date

2010-08-11
Malin and Katarina

The PCR reaction from yesterday was checked on a gel. α should be around 1500 bp but only a band around 750 bp was seen. We had a long meeting with supervisor Per about PCR reactions and the next couple of weeks in the lab.

Karl and Kemal

Ran PCR reaction α with different settings.
α1: regular settings
α2: 10 x diluted template 2
α3: increased annealing time from 30 s to 60 s
α4: decreased annealing temperature

After PCR, the products were run on a gel. α1, α3 and α 4 had a band around 750 bp but nothing on α2.

2010-08-10
Peidi and Lokesh

Checked the transformation plates but nothing had grown. Prepared PCR reaction Γ.

Katarina and Kemal

PCR product Γ was verified on a 0.7 % agarose gel. There was a band around 750 bp as expected and it was purified using the regular protocol. A new phusion mastermix was made and PCR reaction α was run with Γ as one of the template. Regular phusion PCR settings was used.
2010-08-09
Malin and Kemal

Before checking if the ligation worked we need to transform and amplify in E.coli. Then we can miniprep the ligated plasmid and check on a gel. After that we can digest plasmid with PacI and BcuI and ligate the digested IV. Then another round of transformation and miniprep before we can transform yeast.

Karl and Lokesh

Transformed competent E.coli with plasmid ligated with III by heat shock. The cells were incubated at 37 °C over night.
2010-08-07
Lokesh

Moved ligation tube to freezer.
2010-08-06
Malin, Julia and Lokesh

III and IV were digested 3x protocol and were then put on a 1 % agarose gel together with Γ both for verification and purification. Correct bands were seen for purification except for Γ which was empty. In the verification lanes the digested PCR products were to light to be seen but they were seen in purification lanes. IIId and IVd were purified.

IIId: 7.8 ng/µl
IVd: 11.7ng/µl

IIId will now be ligated with the cut plasmid (BamHI and HindIII). Ligation performed according to protocol with 156 ng insert and 52 ng plasmid. Ligation was incubated over night in fridge at 4-16° C.

All 4 sporulation plates were checked but still no tetrads visible.
2010-08-05
Malin and Julia

III and IV were digested using the regular protocol.
III: HindIII and BamHI works with Buffer B
IV: PacI and BcuI works with Buffer M

A 1% gel was run with uncut and digested III and IV, control, I and Β. I worked well and will be purified. The Β lane showed no bands. None of the digested products were visible on the gel so a new gel was run trying to verify this result. The control shows a band around 1700 which is weird. This band is also visible on the III uncut but together with a band around 750 bp. No bands at the IV which is very strange since this PCR product has been verified before. Have something gone wrong with the purification?

As a result PCR reactions III and IV will be redone. New PCR reactions of Γ and α were also performed in the same block.

Karl and Kemal

Reactions of Β were made. Β1 is a continuation of the 100 cycle PCR this time with primers. Β2 uses a megaprimer approach.

All the PCR products were run on a 1 % agarose gel. III, IV and Γ were alright. α and Β2 showed a band around 750 bp.
III: 531.3 ng/µl
IV: 263.9 ng/µl
2010-08-04
Julia and Karl

PCR products Β were loaded on a 0.7 % gel. No correct bands, only amplified templates around 750 bp and something else around 500 bp.

PCR of SAMS will also be redone from scratch. PCR reactions 1, 2 and C are done, then loaded on a gel (2 % gel and low range ladder) and purified.
1: 8.2 ng/µl
2: 7.8 ng/µl
C: 4.9 ng/µl
Samples diluted to 1 ng/µl.

PCR of Β was done again but this time in two steps and with the Finnzymes Tm which corresponds to an annealing temp at 85 °C. Firstly 10 cycles without primers were performed.

Kemal and Lokesh

Second round of PCR with primers were performed. Then new PCR reactions amplifying III and IV were done and also reaction I.
III: 572 ng/µl
IV: 660 ng/µl

The sporplates were checked and very few tetrads were seen.

Β samples were put on a gel but no correct bands visible. We suspect that the reverse primer is attaching in the wrong place since YFP and CFP is so similar which then would lead to 750 bp fragment.
2010-08-03
Malin and Lokesh

PCR products II, III and IV were verified and purified from a 1 % agarose gel. III did not work and was not purified.

Concentrations:
II: 6.2 ng/µl
IV: 5.6 ng/µl
II and IV were diluted to 1 ng/µl.

The new sporplates were examined but no tetrads visible. To check further the cells were stained with DAPI and examined in fluorescence microscope. Still no success.

New PCR reactions were prepared. III was redone and Β was also done. Same settings as yesterday.

Kemal and Karl

PCR products were loaded on a 1% agarose gel for verification and purification. III worked this time and was purified from the gel using the protocol from QIAquick Gel Extraction Kit.
III: 6.4 ng/µl

New PCR of Β was run with two different block settings.
Block A: increased annealing time to 1 min.
Block B: increased annealing time to 58 °C.
2010-08-02
Kemal, Lokesh and Karl

PCR products A, B and 3 were loaded on a gel and then purified from the gel using the protocol from QIAquick Gel Extraction Kit. α and IV were also run on a gel but only showed strong bands corresponding to amplified templates. On the α lane however a very light band was seen at the correct length. This will be further investigated.

Malin and Julia

The purified PCR products were measured with nanodrop:
A1: 11.8 ng/µl
A2: 10.2 ng/µl
B1: 9.6 ng/µl
B2: 17.1 ng/µl
31: 15.0 ng/µl
32: 16.3 ng/µl

A, B and 3 were diluted to 1 ng/µl.

PCR products 4 and 5 were loaded on a 1 % agarose gel together with IV that should be controlled. PCR products 4 and 5 were correct so they were purified from the gel using the protocol from QIAquick Gel Extraction Kit. IV however was not correct. Only a band around 750 bp was visible.

Concentrations:
4: 10.8 ng/µl
5: 10.4 ng/µl
4-5 were diluted to 1 ng/µl.
New PCR reactions were started (II, III and IV). PCR settings that works well with the Phusion enzyme was set:
Initial denaturation: 98 °C 3 min
Denaturation: 98 °C 10 s
Annealing: 55 °C 30 s
Elongation: 72 °C 1.5 min+ 1s/cycle
30 cycles
Final extension: 72 °C 10 min
4°C forever

2010-07-30
Julia and Katarina

The concentration of the purified plasmids were measured with nanodrop:
P1: 1.7 ng/µl
P2: 3.5 ng/µl
P3: 25.9 ng/µl
P4: 42.8 ng/µl
This is clear evidence that water should be used for eluation in the future!

To make sure that we have the right products after purification a 1 % agarose gel was run with fastruler DNA ladder. The gel verified the plasmid size though the bands were light.

PCR product III was evaporated since it was so dilute. New concentration:
IIId: 35 ng/µL

The digested PCR product III and the digested plasmid were ligated with T4 ligase. The DNA concentration in total should not exceed 1 µg. The ratio insert:vector should be 3:1.

Ligation protocol:
150 ng insert
50 ng vector
3 µl 10x T4 buffer
2.5 µl (2.5 U, between 1-5 U) T4 ligase
Adjust volume with water up to 30 µl. Mix and incubate in 4-16 °C (refrigerator) overnight.
The newly plated sporplates were moved to 30°C. The old sporplates were again studied in the microscope and no tetrads were seen.

Kemal and Lokesh

Since we have had a lot of trouble with the longer fusions we will start over from scratch with a new high fidelity polymerase called “Finnzumes Phusion”. New PCR reactions were run (A, B, 3, 4 and 5). IV and α were also performed using alternative settings (2 different PCR reactions described before) but with “old” templates.
2010-07-29
Julia and Katarina

PCR product III is the final fusion protein where Snf4 is tagged with yfp. To be able to insert the construct into the plasmid we must digest it.

Digestion: Mix DNA, buffer and water. Last add enzyme and mix. Incubate at 37° C for 1 hour.
1 µg DNA
2.5 µl Buffer
1 U Enzyme
Up to 25 µl H2O
For PCR product III, the restriction enzymes BamHI and HindIII are used together with buffer B. After digestion (the protocol was scaled 3x) the sample was loaded on a 1 % agarose gel in 6 lanes with 1 kb ladder. The bands were cut out and weighed. The samples were purified from the gel using the protocol from QIAquick Gel Extraction Kit. The DNA was eluated with water.

Concentration:
IIId: 5 ng/µl (Total product 160 µl= 800 ng)

Kemal and Lokesh

The plasmids were also digested with BamHI and HindIII according to the same protocol as above. P1 and P2 were eluated with buffer EB and P3 and P4 with water.

2 new sporulation plates were prepared by plating the diploid yeast cells on spore plates and kept at room temperature.
2010-07-28
Julia and Katarina

The PCR products were run on a 1 % gel with 1 kb ladder. Γ may have worked. α and Β had a band around 750 bp and a weird light band around 500 bp. They obviously did not work. IV did not work at all.

The sporulation plates were checked for spores. Cells were studied under a microscope. No tetrads visible.
2010-07-27
Julia and Katarina

A 1.5 % gel was run with all of the fragments around 700 bp to control the validity of the PCR reactions. A low range ladder was used. PCR products 1-5 seems good. The results from yesterday were confirmed.

A new PCR design was made with α, Β, Γ and IV. PCR was done in two steps to increase the chance of success for longer fusions.
1. 7 cycles with short annealing time.
2. 20 cycles with long annealing time (all other settings kept standard).
2010-07-26

A new experiment were designed called Γ which is the same as I but with longer annealing region. Also an experiment called Δ were designed which corresponds to II.

Julia and Katarina

PCR reactions were run with samples of 4, IV and Γ. IV was tried with two different PCR settings: one regular and one with two runs of PCR, the first without primers and only 5 cycles and the second one with regular settings.

Kemal and Lokesh

The PCR products were controlled on a 0.7% agarose gel. Only 4 worked. Γ was empty and IV had bands in the wrong place (amplified template).
4: 534 ng/ µl
2010-07-22
Karl, Lokesh and Kemal

A new mastermix was prepared using a different enzyme. Then the experiments from yesterday was redone using regular PCR settings:
A, 5, 2, I
Then some more experiments of IV was redone:
2a, 2b and 2c
The new primer 14 had arrived so PCR reaction 4 was also redone.

All the PCR products were run on a 0.7 % agarose gel with GeneRuler 1 kb DNA ladder. The results were inconclusive. None of the expected bands were received. At this point we are not sure what to do since none of the PCR reactions worked.
2010-07-21
Malin, Julia, Karl and Lokesh

Verification of the PCR products α1, α2, α3, α4, α5 and αK by running on a thin 0.7 % agarose gel (8 µl sample+ 2 µl loading buffer, GeneRuler 1 kb DNA ladder).

The gel didn’t show the expected band lengths. A band around 700 bp could be seen, most strongly for α4 and α5. We suspect that there is something wrong with the ladder because we get inconclusive results. Since none of the PCR reactions for the last couple of days have worked we will redo the templates of α and IV: I, 2, 5 and A. These PCR reactions have worked before.

Expected fragment length:
A.2: 1938 bp
5.2: 757 bp
2.2: 762 bp
I.2: 768 bp

The PCR products were run on a thin 0.7 % agarose gel. We used both the FastRuler High Range Ladder and the GeneRuler 1 kb DNA ladder. 5.2 and 2.2 showed the expected bands around 750 bp. I.2 and A.2 did not work at all, nothing visible on the gel. We also run some of the old PCR products to see what the result would be using a new ladder. We run α2, α5, 4c (IV) and 4c*(IV). Here some template amplifications were visible but sadly none of the expected fragment lengths. Both ladders showed the same result so there is probably nothing wrong with the GeneRuler ladder except that it is not showing strong color.
2010-07-20
Malin, Julia, Lokesh and Karl

Verification of yesterdays PCR reactions by running on a 0.7 % agarose gel (8 µl sample+ 2 µl loading buffer, GeneRuler 1 kb DNA ladder)

None of the reactions worked.

Gel 1 (Block A): Nothing visible on gel, ladders only very light so these samples were run on a new 0.7 % agarose gel but this time thinner to get better resulotion (0.58 g agarose + 80 ml TBE). This time no expected fragments were seen, but bands corresponding to primer dimers were clearly seen.
Gel 2 (Block B): A few small bands were seen but no bands of expected length.

We decided to stop working on IV until proper feedback on the experimental setup was received. Instead we continued with α.

Doing another PCR round of α (SAMS peptide):
α: PCR fusion of cfp-SAMS and yfp: Adds BamHI on N-terminus of cfp and HindIII on C-terminus of yfp and keeps the stop codons. Expected fragment length: 1502 bp.

α1: regular protocol.
α2: regular protocol.
α3: 1.25 µl extra primer 9.
α4: 1.25 µl extra primer 12.
α5: 1.25 µl extra primer 9 and 1.25 µl primer 12.
αK: Control
Regular PCR-settings
2010-07-19
Karl, Peidi and Kemal

Doing a new experimental setup for IV:
IV. PCR fusion of cfp and Snf1: Adds SpeI on N-terminus of cfp and PacI on C-terminus of Snf1 and keeps the stop codon. Expected fragment length: 2643 bp.

13 different tubes were prepared and run at two different PCR-settings. Block A: Regular settings except double annealing time (1 min). Block B: Regular settings except 58° C annealing temperature.

C : Control
1a: same as 2* (template 5 5 x diluted)
1b. same as 3* (template 5 10 x diluted)
1c: same as 4* (template 5 100x diluted)
2a: increased product A concentration to 5 ng/µl.
2b: increased product A concentration to 10 ng/µl.
3a: same as 5* (2x primer 7)
3b: same as 6* (template 5 diluted 5x, 2x primer 7)
3c: same as 7* (template 5 diluted 10x, 2x primer 7)
3d same as 8* (template 5 diluted 100x, 2x primer 7)
4a: 2x primer 7.
4b: 2x primer 7, 5x template A.
4c: 2x primer 7, 10 x template A.
2010-07-16
Lokesh, Kemal, Katarina and Peidi

Verification of PCR reactions IV* (8 tubes) and α on a 0.7 % agarose gel (5 µl sample+ 2µl loading buffer, GeneRuler 1 kb DNA ladder).

No bands visible. None of the PCR reactions worked, just small bands visible corresponding to primers. The α PCR reaction messed the tubes up. That might be an explanation why there were no bands on the gel for α. A new experimental setup must be made tomorrow.

PCR products I and 2 were run with a low range ladder to see that those products are ok. That gel was satisfactory.
2010-07-15
Malin, Julia, Kemal and Karl

Concentrations of PCR products:
4.2. 356.2 ng/µl
I. 338.3 ng/µl
II. 303.6 ng/µl
III. 337.5 ng/µl
IV. 280.9 ng/µl

All PCR-products were diluted to 1 ng/µl.

Verified PCR products I-IV and 4.2 on a 0.7 % Agarose Gel (8 µl sample + 2µl loading buffer, GeneRuler 1 kb DNA ladder)
PCR products I, II and III were good but 4.2 showed no bands at all. After primer design control we found a problem with primer 14, which then was ordered again. IV had only a band around 700 bp instead of 2600. This might be template 5, which then has been amplified. If the settings are changed maybe it will work. Firstly the template 5 will be diluted 0x, 5x, 10x and 100x (4 tubes: 1*, 2*, 3* and 4*) and these dilutions will also be run with higher primer concentration 7 (4 tubes: 5*, 6*, 7* and 8*). 2.5 µl primer 7 will be added instead of 1.25 µl primer 7.

New PCR reactions were run:
α: PCR fusion of cfp-SAMS and yfp: Adds BamHI on N-terminus of cfp and HindIII on C-terminus of yfp and keeps the stop codons. Expected fragment length: 1502 bp.
K4. Control.

IV *: PCR fusion of cfp and Snf1: Adds SpeI on N-terminus of cfp and PacI on C-terminus of Snf1 and keeps the stop codon. Expected fragment length: 2643 bp.
Half volume 25 µl. Regular PCR settings except 56 °C annealing temperature.
1*;- 8*
K1*. Control for 1-4*.
K2*. Control for 5-8*.
2010-07-14
Julia and Katarina
Ran PCR 1-5.
1. Amplification of cfp-sams compatible: Add restriction enzyme site BamHI on N-terminus +SAMS on C-terminus.
Expected fragment length: 748 bp.
2. Amplification of yfp-SAMS competible: Adds restriction enzyme site for HindIII on C-terminus and SAMS tail on N-terminus.
Expected fragment length: 762 bp.
3. Amplification of yfp-snf4 compatible: Adds restriction enzyme site BamHI on N-terminus and Snf4 tail on C-terminus.
Expected fragment length: 755 bp.
4. Amplification of cfp-Snf4 compatible: Adds restriction enzyme site HindIII on C-terminus and Snf4 tail on N-terminus.
Expected fragment length: 769 bp.
5. Amplification of cfp-snf1 compatible: Adds restriction enzyme site SpeI on N-terminus and Snf1 tail on C-terminus.
Expected fragment length: 757 bp.
K2. Control K2.

Julia, Katarina and Malin
Verified PCR 1-5: measured concentration by nanodrop and checked if the fragments were the correct length by running on a 2 % agarose gel (8 µl sample+2 µl loading buffer, Fermentas FastRuler Low Range).
PCR product 1, 2, 3 and 5 worked and gave expected fragment lengths. Number 4 however did not work. Only a fragment around 80 bp was visible, probably a primer dimer.

Concentrations:
1. 443.9 ng/µl
2. 371.0 ng/µl
3. 361.7 ng/µl
4. --
5. 377.6 ng/µl
A. 451.1 ng/µl (snf1)
B. 438.7 ng/µl (snf4)
C. 408.9 ng/µl (SAMS)
1-5 and A-C were diluted to 1 ng/µl.

Ran PCR of I, II, III, IV and 4.
4.2. Amplification of cfp-Snf4 compatible: Adds restriction enzyme site HindIII on C-terminus and Snf4 tail on N-terminus. Expected fragment length: 769 bp. (second try)
I. PCR fusion of cfp and SAMS: Adds BamHI on N-terminus of cfp and gives a SAMS C-terminus. Expected fragment length: 768 bp.
II. PCR fusion of yfp and Snf4 1: Adds BamHI on N-terminus of yfp and removes stop codon. Expected fragment length: 1694 bp.
III. PCR fusion of yfp and Snf4 2: Adds BamHI on N-terminus of yfp and adds HindIII on C-terminus of Snf4 plus adds stop codon. Expected fragment length: 1708 bp. Final Product!
IV. PCR fusion of cfp and Snf1: Adds SpeI on N-terminus of cfp and PacI on C-terminus of Snf1 and keeps the stop codon. Expected fragment length: 2643 bp.
K3. Control

Karl and Malin
Transferred diploid cells of snf1Δ mutants to two sporulation plates and incubated in 30° C. (For 2-7 days)
2010-07-13
Julia and Lokesh
Ran the gel with products of our first three PCRs along with the templates we made for the two fluorescent proteins. We also prepared the sample solutions of DNA templates with appropriate concentration (1ng/µl) for the next PCR reactions.
Verified the PCR products and the digested miniprepped EYFP and ECFP by running an agarose gel which showed good results. Expected fragment lengths were received. The SAMS-peptide however was too short to be visible on the gel (67 bp).
Prepared for PCR 1-5. The miniprepped ECFP and EYFP were diluted to a stock concentration of 1 ng/ ml to use for the PCR. The concentrations of the first PCR product were measured using nanodrop and then diluted to 1 ng/ml.
snf1: 20.5 ng/ml
snf4: 122.6 ng/ml
SAMS: 114.9 ng/ml

Karl and Adnan
We made duplicates of the haploid Snf4∆ and wildtype strains on new plates in case the original plate would be contaminated. Prepared a sporulation medium that was autoclaved and poured into empty growth plates to stay in room temperature over night.
2010-07-12
Katarina and Julia
Amplification of genomic SNF1 DNA by PCR. All primers were resuspended in mq-water according to the volume on the lable, the final concentration 100 pg/ml. The primers were then diluted 10x and the SAMS-peptide templates were diluted 1000x. PCR reactions were run amplifying subunits Snf1 and Snf4 and also the SAMS-peptide. YPD medium and agar plates were prepared (yeast).

Adnan and Kemal
Miniprep purification of EYFP and ECFP plasmides from overnight culture. The concentrations were measured using Nanodrop:
ECFP1: 99 ng/ml
ECFP2: 89.9
EYFP1: 104, 7
EYFP2: 172,5
The concentrations were verified with electrophoresis. The plasmids were cut with restriction enzymes EcoRI and Pst1.
ECFP, plasmid pSB1AK3, fragment sizes 750 bp and 3200 bp.
EYFP, plasmid pSB1A2, fragment sizes 750 bp and 2050 bp.

2010-07-11
Katarina
Made overnight cultures with colony 3 and 4 plasmid (not single cultures) and twp each of EYFP and ECFP.

2010-07-10
Julia
Moved plated bacteria from incubator to refrigerator.
2010-07-09
Malin and Julia
The SOC medium was autoclaved. Competent E.coli cells were transformed with our FPs through heat shock and plated on petri dishes. 20 new LB-amp plates were made.
Adnan and Katarina
Picked up primers at Chalmers and checked if they were ok. The concentration of the genomic DNA (SNF1 gene) were measured. Prepared a master mix so that the PCR-reactions could be started Monday morning.
2010-07-08
Malin, Julia and Peidi
The two BioBricks EYFP and ECFP were extracted from the kit plates and stored in the freezer. A SOC-medium was prepared.
2010-07-07
Adnan, Katarina and Julia
As the gels from Tuesday showed ambigous results we decided to redo the miniprep of the plamids. We used the overnight preparations of the two unused colonies (3 & 4). The miniprep went smoothly except for major difficulties regarding untrustworthy pipettes. The pipettes marked with green tape are the ones to use from now on together with the tips with the same markings! A gel was molded and this time we decided to use a full gel to get a better resolution. The results on the gel were very good. The plasmids had clearly been cut in one or two places and the fragment sizes seem to correspond to the expected sizes.
2010-07-06
Malin, Adnan and Peidi
Colony 1 and 2 were picked to do a miniprep. The plasmids were extracted and a plasmid integrity check was performed. By cutting with BamHI, one cut were made to get the size of the plasmid. Then we cut with ClaI which is a two-cutter that gives a fragment that is 600 bp and one that is 6800. The gel which should confirm this was not satisfactory since the 600 band was missing.
2010-07-05
Malin and Katarina
An overnight culture were made from 4 different colonies of E.coli containing the plasmid pSB-GM1.

Lab Notes

11

August 11, 2010

The PCR reaction from yesterday was checked on a gel. α should be ...

@@ Line 1: / Line 1: @@
-<html>
+<html xmlns="http://www.w3.org/1999/xhtml">
 <head>
 <meta http-equiv="content-type" content="text/html; charset=utf-8" />
@@ Line 6: / Line 6: @@
 <style type="text/css">
+/* wiki modificiations start */
 #contentSub {
 display:none;
 }
 #siteSub {
-display:none;
+display:none;padding:-200px;margin:0;
 }
-#search-controls {
-display:none;
-}
 .firstHeading {
-display:none;
+display:none;padding:0;margin:0;
 }
 #search-controls {
-margin-top:30px;
+padding-top:10px;
 }
-#footer-box {
-display:none;
-}
-body {
-	margin: 0px;
-	padding: 0px;
-	background-color: #FFFFFF;
-}
 form {
@@ Line 40: / Line 34: @@
 }
-h1, h2, h3, h4, h5, h6 {
-	margin: 0px;
-}
-body, th, td, input, textarea, select {
+h2 {background:transparent; text-decoration:none;   }
-	font-family: Arial, Helvetica, sans-serif;
+#globalWrapper { background-color: transparent; border: none; margin-bottom: 0px; padding: 0;}
-	font-size: 11px;
+#content { background-color: transparent; border: none; padding: 0; margin-bottom: 0px; width: 100%;}
-	color: #333333;
+#bodyContent { border: none; padding:0; margin-bottom:0px; width:100%;}
-}
-p, blockquote, ul, ol, dl {
+#top-section { background-color: transparent; height: 20px; margin-top: -30px; margin-left: auto; margin-right: auto; margin-bottom: 0 !important; margin-bottom: 0; padding:0; border: none; }
-	margin-top: 0px;
+#p-logo {  display: none;}
-	margin-bottom: 1em;
+#search-controls { display:none;}
-	text-align: justify;
+#menubar.left-menu {width: 400px;  display:block; float:left; margin-top:-50px; border: none;}
+#menubar.left-menu ul { border: none;}
+#menubar.left-menu a{color:#5698b0;}
+#menubar.left-menu a:hover{color:#e6f6fb;}
+#menubar.left-menu a:selected{color:#e6f6fb;}
+#menubar.right-menu {  width:300px; display:block; float:left; margin-top:-50px; border: none;}
+#menubar.right-menu ul {  border: none;}
+#menubar.right-menu a{color:#5698b0;}
+#menubar.right-menu a:hover{color:#e6f6fb;}
+/* wiki modifications end/
+/*to be modified */
+body {background:url(https://static.igem.org/mediawiki/2010/8/8e/Shadow.png) repeat-y top center;
+	   padding: 0 0 0 0;
+     }
+a{
+    font-family: Arial, Helvetica, sans-serif;
+    font-size: 12px;
+    font-weight:bold;
+    color: #06639e;
+    text-decoration:none;
+    padding:0;
+    margin:0;
 }
-a {
-	color: #ED8407;
+a:hover{
+padding:0;margin:0;
+    text-decoration: underline;
+    color: #000066;
 }
-a:hover {
+a:visited{color:#06639E;}
-	text-decoration: none;
+*
+{
+    border: 0;
+    margin: 0;
 }
-.style1 {
+.h1 {
-	font-size: 10px;
+    padding-left:30 px;
-	color: #A1A1A1;
+    font-family: Arial, Helvetica, sans-serif;
-	height: 15px;
+    font-size: 18px;
+    font-weight:normal;
+    color: #06639e;
+    text-decoration:none;
 }
-.style1 a {
+#all{
-	color: #ED8407;
+  padding:0;
-	text-decoration: none;
+  margin:0;
+  padding-left:10%;
+  background:  url(https://static.igem.org/mediawiki/2010/3/3a/Bg.png) top center repeat-y;
+}
+#header{
+   height: 290px;
+   background:url(https://static.igem.org/mediawiki/2010/5/50/BannerGo.png) no-repeat;
+   margin-left:15px;
+}
+#search {height: 30px;}
+#myContent{
+margin-top: 0px;
 }
-.style1 a:hover {
+/* left layer starts */
+#left{
+    width:138px;
+    padding-left:45px;
+    float: left;
 }
-.list1 {
+.Title1 {
-	margin-left: 0px;
+    font-family: Comic Sans;
-	padding-left: 10px;
+    font-weight:600;
-	list-style: none;
+    color: #fff;
-	line-height: 15.7px;
+    font-size: 16px;
-	text-transform: uppercase;
+    text-align:center;
-	font-family: Arial, Helvetica, sans-serif;
+    width:100%;
-	font-weight: bold;
+    height: 30px;
-	font-size: 11px;
+    padding-top: 7px;
+    margin-top:7px;
+    background:  url(https://static.igem.org/mediawiki/2010/a/aa/CatTitle.png);
+    background-repeat:no-repeat;
+    background-position:top left;
 }
-.list1 li {
+.left_grad{
-	background: url(https://static.igem.org/mediawiki/2010/f/ff/Img4.gif) repeat-x left bottom;
-	padding: 5px 0px 5px 10px;
+    background-position: top left;
+    padding-top: 0px;
+    margin-top: 0px;
 }
-.list1 a {
+.categories{
-	background: url(https://static.igem.org/mediawiki/2010/1/17/Img7.gif) no-repeat left center;
-	text-decoration: none;
+    background: url(https://static.igem.org/mediawiki/2010/1/10/CatCon.png) top repeat-y;
-	padding-left: 10px;
+    min-height:100px;
-	color: #A1A1A1;
+    border: 1px solid #0485B0;
 }
-.text1 {
+#news {
-	letter-spacing: -1px;
+  padding-top:0px;
-	text-transform: uppercase;
+  background: url(https://static.igem.org/mediawiki/2010/1/10/CatCon.png) left top repeat-y;
-	font-size: 18px;
+  min-height:100px;
-	color: #207FF8;
+  border: 1px dotted #0485B0;
+}
+#news p{
+    color:#07374E;
+    font-weight:normal;
+    font-size: 11px;
+	text-align:left;
+    text-decoration:none;
+    padding: 10px 5px 0px 15px;
+	display:block;
 }
-.text2 {
-	text-transform: uppercase;
+#news a:hover {
-	font-size: 10px;
+ border-bottom: 1px dotted #06639e;
 }
-.text3 {
+.categories a{
-	text-transform: uppercase;
+    font-family: Arial, Helvetica, sans-serif;
-	font-size: 10px;
+    font-weight:normal;
-	color: #4A9AFF;
+    color: #0485B0;
+    text-decoration: none;
+    text-align:left;
+    padding: 4px 0px 4px 20px;
+    font-size:12px;
+    padding-top:5px;
+    display:block;
 }
-.text4 {
+.categories a:hover{
-	letter-spacing: -1px;
+   text-decoration:none;
-	text-transform: uppercase;
-	font-size: 18px;
+   font-size:12px;
-	color: #ED8407;
+   font-weight:700;
+   color: #fff;
+   background:url(https://static.igem.org/mediawiki/2010/4/47/CatAhover.png);
+}
+/* left layer ends */
+/* center layer starts */
+#center{
+    width: 600px;
+    padding-left: 20px;
+    float: left;
+}
+#center p{
+    padding-left:0px;
+    padding-right:0px;
+    padding-bottom: 10px;
 }
-.text5 {
+    /* menu starts */
-	background-color: #E0E0E0;
-	text-transform: uppercase;
-	padding: 10px 0px 10px 15px;
+        #Title2{
-	font-size: 14px;
-	font-weight: bold;
+          height: 40px;
+          width: 600px;
+          background: url(https://static.igem.org/mediawiki/2010/5/50/Title_center1.png);
+          background-repeat:no-repeat;
+          background-position: center;
+          }
+			#sddm
+		{
+			  padding-left:62px;
+			  padding-top: 0px;
+			}
+		#sddm li
+		{
+			list-style: none;
+			float:left;
+			text-align:center;
+			}
+		#sddm li a
+		{	display: block;
+			padding: 0px 0px;
+			width: 96px;
+			height:31px;
+			text-align: center;
+			text-decoration: none;
+			font-size:  15px;
+			font-family: Rockwell;
+			font-weight:normal;
+			 padding-top:10px;
+			}
+		#active {
+			}
+		#active a{
+			background: url(https://static.igem.org/mediawiki/2010/0/0c/MActive2.png) top center repeat-y;
+		        color:#FFFFFF;
+			font:  13px arial !important;
+			font-weight:600 !important;
+		}
+		#sddm li a:hover
+		{	background: url(https://static.igem.org/mediawiki/2010/0/0c/MActive2.png) top center repeat-y;
+			color:#fff;
+			font:  13px arial;
+			font-weight:600;
+		}
+		#sddm div
+		{	position: absolute;
+			visibility: hidden;
+			margin-top: -5px;
+			padding: 0px;
+			background: #fff ;
+			border: 1px solid #9CD2ED ;
+			}
+			#sddm div a
+			{	position: relative;
+					height:16px;
+				display: block;
+				margin: 0px;
+				padding: 4px 20px;
+                                 padding-top:auto;
+                                 padding-bottom:auto;
+						width:auto;
+						min-width: 100px;
+				font-family: sans-serif, Tahoma, Verdana, Geneva, Arial, Helvetica !important;
+				text-align: left;
+				text-decoration: none;
+				background: transparent;
+				color: #2e6d95;
+				font-weight:normal !important;
+				font-size: 11px !important ;
+				border:none;
+				}
+			#sddm div a:hover
+			{	background: #61b5da  url(https://static.igem.org/mediawiki/2010/9/9d/MArrow.png) no-repeat;
+				color: #FFF;
+				text-decoration:none;
+				font:  11px arial;
+				font-weight:500;
+				}
+	/* menu ends */
+#text{
+    text-align:left;
+	width:100%;
+	margin: 5px 10px 10px 20px;
+    background: #fff ;
 }
-.text6 {
+#text p
-	font-weight: bold;
+{
-	color: #ED8407;
+  padding: 10px 10px 10px 25px;
+  font-family: "Times New Roman";
+  font-size:13px;
+  line-height:19px;
 }
-.text7 {
+.logo{
-	text-align: center;
+float:left;
-	letter-spacing: -2px;
+padding: 10px 20px 10px 20px;
-	text-transform: uppercase;
+ }
-	font-size: 24px;
-	color: #FFFFFF;
+#text p{color: #07374E;}
+.read{
+    text-align: right;
+    padding-bottom:5px;
+   /* padding-right: 5px;*/
 }
-.text8 {
+#myTitle{
-	text-align: center;
+    font-family: Arial, Helvetica, sans-serif;
-	text-transform: none;
+    font-weight:normal;
-	font-size: 12px;
+    color: #00456e;
-	color: #FFFFFF;
+    font-size: 16px;
+    height: 36px;
+    padding-top: 10px;
+    padding-right:-200px;
+    margin-left: 20px;
+    text-align:center;
+    background: url(https://static.igem.org/mediawiki/2010/6/64/Title_center.png) left top;
+    background-repeat:no-repeat;
 }
-.bg1 {
-	background: url(https://static.igem.org/mediawiki/2010/b/bd/Img3.jpg) no-repeat left top;
+#team {
-	height: 187px;
+ padding: 20px 10px 20px 30px;
 }
-.bg2 {
+/* center ends */
-	background: url(https://static.igem.org/mediawiki/2010/1/15/Img4-gbg.gif) repeat-x left top;
+/* right starts */
+#right{
+    width:160px;
+    padding-left: 20px;
+    /*padding-right: 135px;*/
+    float:left;
 }
-.bg3 {
+#right .read a{
-	height: 117px;
-	background-image: url(https://static.igem.org/mediawiki/2010/d/da/1-2.jpg);
+    color: #06639e;
-	background-repeat: no-repeat;
+    font-weight:normal;
-	background-position: left top;
+    font-style: italic;
+    font-size: 12px;
+    text-decoration:none;
+    border-bottom: 1px #06639e;
+    padding-right:10px;
 }
-.align-justify { text-align: justify; }
+#right .read a:hover{border-bottom: 1px dotted #06639e;}
-.align-right { text-align: right; }
-img { border: none; }
-.img1 {
+		#lab{
-	float: left;
-	margin: 3px 15px 0px 0px;
+			padding-top:0px;
-}
+			background: url(https://static.igem.org/mediawiki/2010/1/10/CatCon.png) top left repeat-y;
+			min-height:100px;
+			/*margin-left:30px;*/
+			border: 1px dotted #0485B0;
+		}
+		 .numleft{
+			background: url(https://static.igem.org/mediawiki/2010/2/22/Numbg1.png);
+			background-repeat: no-repeat;
+			background-position: left top;
+			float:right;
+			width: 37px;
+			min-height: 37px;
+			font-family: Arial,Helvetica,sans-serif;
+			font-weight: bold;
+			color: #ffffff;
+			text-align: center;
+			margin: 25px 8px 0px 8px;
+		}
+		 .numleft p{
+			 padding-top: 2px;
+                          padding-left: 1px;
+			 font-size: 16px;
+		}
+		 .newsright{
+		    text-align:left;
+			margin: 10px 50px 0 10px;
+		}
+		 .newsright p{
+			font-size:11px;
+            color:#07374E;
+            margin-top:7px;
+		}
-.img2 {
+.Title3 {
-	float: right;
+    font-family: Comic Sans;
-	margin: 3px 0px 0px 15px;
+    font-weight:600;
+    color: #fff;
+    font-size: 16px;
+    text-align:center;
+    width:100%;
+    height: 30px;
+     padding-top: 7px;
+    margin-top:7px;
+	margin-left:0px;
+    background: url(https://static.igem.org/mediawiki/2010/c/cf/CatTitle1.png) ;
+    background-repeat:no-repeat;
+    background-position:top left;
 }
-hr { display: none; }
-.hr1 {
+/* right ends */
-	height: 1px;
+/* footer starts */
+#myfooter
+{
+    height: 60px;
+    font-size: 10px;
+    color: #00456e;
+    padding-right:180px;
+    clear:both;
 }
-.STYLE5 {
-	font-size: 11px;
+#myfooter p{
-	font-weight: normal;
+    color: #fff;
-	font-family: Arial, Helvetica, sans-serif;
+    font-size: 10px;
+    font-weight: normal;
+    text-decoration: none;
+	padding-top:0px;
+    padding-left:0px;
+	bottom:0px;
 }
-.STYLE6 {font-size: 12px; font-weight: bold; font-family: Arial, Helvetica, sans-serif; }
-.STYLE7 {
+#myfooter a{
-	font-size: 10px;
+   color: #fff;
-	font-style: italic;
+    font-size: 11px;
+    font-weight: normal;
+    text-decoration: none;
+   padding-left: 0px;
+   margin-top:0px;
+   bottom:0;
 }
-.STYLE8 {
-	font-size: 13px;
+#myfooter a:hover{
-	font-weight: bold;
+  text-decoration: underline;
 }
+/* footer ends */
 </style>
+<script type="text/javascript">
+// Copyright 2006-2007 javascript-array.com
+var timeout	= 500;
+var closetimer	= 1;
+var ddmenuitem	= 0;
+// open hidden layer
+function mopen(id)
+{
+	// cancel close timer
+	mcancelclosetime();
+	// close old layer
+	if(ddmenuitem) ddmenuitem.style.visibility = 'hidden';
+	// get new layer and show it
+	ddmenuitem = document.getElementById(id);
+	ddmenuitem.style.visibility = 'visible';
+}
+// close showed layer
+function mclose()
+{
+	if(ddmenuitem) ddmenuitem.style.visibility = 'hidden';
+}
+// go close timer
+function mclosetime()
+{
+	closetimer = window.setTimeout(mclose, timeout);
+}
+// cancel close timer
+function mcancelclosetime()
+{
+	if(closetimer)
+	{
+		window.clearTimeout(closetimer);
+		closetimer = null;
+	}
+}
+// close layer when click-out
+document.onclick = mclose;
+</script>
 </head>
+<body>
+<div id="all">
+ <div id="search"></div>
+   <div id="header">
+  </div>
+			<div id="myContent" align="center">
-<table width="728" border="0" align="center" cellpadding="0" cellspacing="0">
+    <div id="left">
-	<tr valign="top">
-		<td width="429"><img src="https://static.igem.org/mediawiki/2010/9/98/1-1.jpg" alt="" width="429" height="304" /></td>
-		<td width="299"><table width="100%" border="0" cellspacing="0" cellpadding="0">
-				<tr>
+                              <div class="Title1">Team</div>
-					<td class="bg3"><table width="260" border="0" align="center" cellpadding="0" cellspacing="0">
+                              <div class="left_grad">
+                                  <div class="categories">
+                                           <a href="https://2010.igem.org/Team:Gothenburg-Sweden/About_us#intro">Introduction</a>
+                                           <a href="https://2010.igem.org/Team:Gothenburg-Sweden/About_us#cth">CHALMERS</a></li>
+                                           <a href="https://2010.igem.org/Team:Gothenburg-Sweden/About_us#svs">Supervisors</a></li>
+                                           <a href="https://2010.igem.org/Team:Gothenburg-Sweden/About_us#sts">Students</a>
+				  </div>
+      </div>
+                                <div class="list_border"></div>
+                              <div class="Title1">FUSS</div>
+                                <div class="left_grad">
+                                   <div class="categories">
+                                            <a href="#">What's all about?</a>
+                                            <a href="#">Background</a>
+                                            <a href="#">Protein Fusion</a>
+                                            <a href="#"> Methods</a>
+                                            <a href="#">Preliminary Results</a>
+                                  </div>
+                                </div>
+                            <div class="list_border"></div>
-					</table></td>
+<SCRIPT language=javascript>
-				</tr>
+$("#accordion > li").click(function(){
-				<tr>
-					<td class="bg1"><table width="250" border="0" align="center" cellpadding="0" cellspacing="0">
-							<tr>
-								<td width="301" height="203"><ul class="list1">
-<li><a href="https://2010.igem.org/Team:Gothenburg-Sweden">Home</a></li>
-<li><a href="https://2010.igem.org/Team:Gothenburg-Sweden/Project">Project</a></li>
-                  <li><a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note">Lab Note </a></li>
-                   <li><a href="https://2010.igem.org/Team:Gothenburg-Sweden/Results">Results</a></li>
-				   <li><a href="https://2010.igem.org/Team:Gothenburg-Sweden/About_us">About Us</a></li>
-				   <li><a href="https://2010.igem.org/Team:Gothenburg-Sweden/Sponsors">Sponsors</a></li>
-                  <li><a href="https://2010.igem.org/Team:Gothenburg-Sweden/Contact">Contact Us</a></li>
-							  </ul></td>
-							</tr>
-				  </table></td>
-				</tr>
-	  </table></td>
-	</tr>
-</table>
-<table width="725" border="0" align="center" cellpadding="0" cellspacing="0">
-	<tr valign="top">
-		<td width="725"><table width="100%" border="0" cellspacing="0" cellpadding="0">
-				<tr>
-					<td><img src="https://static.igem.org/mediawiki/2010/2/23/Spacer.jpg" alt="" width="30" height="30" /></td>
-				</tr>
-				<tr>
-					<td><span class="text1">preliminary work &amp; lab notes </span></td>
-				</tr>
-				<tr>
-					<td>&nbsp;</td>
-				</tr>
-				<tr>
-					<td>&nbsp;</td>
-				</tr>
-				<tr>
-					<td class="text5">preliminary</td>
-				</tr>
-				<tr>
-					<td>&nbsp;</td>
-				</tr>
-				<tr>
-					<td>&nbsp;</td>
-				</tr>
-				<tr>
-				  <td><p class="STYLE6">Fluorescent  Proteins:</p>
-				    <p>Green Fluorescent Proteins <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#FP">(read more)</a></p>
-					<p class="STYLE6">Plasmid backbone:</p>
-                    <p>pSP-GM1 <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#plasmid">(read more)</a></p>
-				    <p class="STYLE6">SNF1  (modified subunits):</p>
-                    <p>Snf1 (alfa), Snf4 (gamma) <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#SNF1">(read more)</a></p>
-				    <p class="STYLE6">FP  positions:</p>
-                    <p>N-terminal alfa with N-terminal gamma, N-terminal gamma with C-terminal gamma <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#position">(read more)</a></p>
-				    <p class="STYLE6">Primer  design:</p>
-                    <p>Fusion primers with restiriction enzyme sites included at very ends, each annealing part was desinged with an melting temperature of around 60 C <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#primer">(read more)</a></p>
-			      </td>
-		  </tr>
-				<tr>
-					<td>&nbsp;</td>
-				</tr>
-				<tr>
-					<td>&nbsp;</td>
-				</tr>
-				<tr>
-					<td class="text5">lab work by date </td>
-				</tr>
-				<tr>
-					<td>&nbsp;</td>
-				</tr>
-				<tr>
-					<td><table width="725" border="0" align="center" cellpadding="0" cellspacing="0">
-							<tr>
-								<td width="725">&nbsp;</td>
-							</tr>
-<tr><td> <strong>2010-08-20</strong><br>
-Peidi, Adnan and Lokesh<br><br>
-Uncut plasmids (empty, 1 and 3) were run again on a gel. 1 and 3 were not visible on the gel. We had trouble with loading the gels as the samples floated up. They could have floated up if ethanol was present in the solution. Plasmid 1 was used up. The rest were dried and redissolved. Uncut plasmids (empty, 2 and 3) were run again on a gel. The loading was succesful, but the results of the gel were unsatisfactory showing that all the uncut plasmids were of different size.  <br><br> <strong>2010-08-19</strong><br>
-Peidi and Adnan<br><br>
-Buffers for the LiAc yeast transformation were prepared. Delta Snf4 cells were inoculated into two tubes with YPD medium.  <br><br>
-Katarina <br><br>
-Plasmids were minipreped from the overnight culture (1, 2, 3, 4, 5 and 6). They were also restriction digested (cut once and cut twice) for verification and run on a gel. The results from the gel indicate that the plasmids were not cut, but 3 was migrating more slowly indicating that it maybe contained the insert. <br><br>
-Peidi, Katarina and Adnan <br><br>
-Uncut plasmids (empty, 1 and 3) were run on a gel in order to compare with the situation on the gel where they were supposed to be cut. 1 and 3 were not visible on the gel. It seems that we had trouble loading the gels as the samples floated up. <br><br>
-<strong>2010-08-18</strong><br>
-Karl and Katarina <br><br>
-Plasmids were minipreped from the overnight culture. They were also restriction digested for verification and run on a gel. The results from the gel were not satisfactory. <br><br><strong>2010-08-17</strong><br>
-Kemal<br><br>
-Transformed E.coli were inoculated into six tubes with LB medium. <br><br> <strong>2010-08-16</strong><br>
-Karl and Lokesh<br><br>
-Competent E.coli were transformed with III (from both Phusion and Taq) with the heatshock method. <br><br>
-<strong>2010-08-11</strong><br>
-Malin and Katarina<br><br>
-The PCR reaction from yesterday was checked on a gel. &alpha; should be around 1500 bp but only a band around 750 bp was seen. We had a long meeting with supervisor Per about PCR reactions and the next couple of weeks in the lab. <br><br>
-Karl and Kemal <br><br>
-Ran PCR reaction &alpha; with different settings. <br>
- <strong>&alpha;1: </strong> regular settings<br>
-<strong>&alpha;2: </strong> 10 x diluted template 2<br>
-<strong>&alpha;3: </strong> increased annealing time from 30 s to 60 s<br>
-<strong>&alpha;4: </strong> decreased annealing temperature<br><br>
-After PCR, the products were run on a gel. &alpha;1, &alpha;3 and &alpha; 4 had a band around 750 bp but nothing on &alpha;2. <br><br>
-<strong>2010-08-10</strong><br>
-Peidi and Lokesh<br><br>
-Checked the transformation plates but nothing had grown. Prepared PCR reaction &Gamma;. <br><br>
-Katarina and Kemal<br><br>
-PCR product &Gamma; was verified on a 0.7 % agarose gel. There was a band around 750 bp as expected and it was purified using the regular protocol. A new phusion mastermix was made and PCR reaction &alpha; was run with &Gamma; as one of the template. Regular phusion PCR settings was used. <br><br>
-<strong> 2010-08-09</strong><br>
-Malin and Kemal<br><br>
-Before checking if the ligation worked we need to transform and amplify in E.coli. Then we can miniprep the ligated plasmid and check on a gel. After that we can digest plasmid with PacI and BcuI and ligate the digested IV. Then another round of transformation and miniprep before we can transform yeast. <br><br>
-Karl and Lokesh<br><br>
-Transformed competent E.coli with plasmid ligated with III by heat shock. The cells were incubated at 37 &deg;C over night. <br><br>
-<strong>2010-08-07</strong><br>
-Lokesh<br><br>
-Moved ligation tube to freezer. <br><br>
-<strong>2010-08-06</strong><br>
-Malin, Julia and Lokesh<br><br>
-III and IV were digested 3x protocol and were then put on a 1 % agarose gel together with &Gamma; both for verification and purification. Correct bands were seen for purification except for &Gamma; which was empty. In the verification lanes the digested PCR products were to light to be seen but they were seen in purification lanes. IIId and IVd were purified. <br><br>
-<strong>IIId: </strong> 7.8 ng/&micro;l<br>
-<strong>IVd: </strong> 11.7ng/&micro;l<br><br>
- IIId will now be ligated with the cut plasmid (BamHI and HindIII). Ligation performed according to protocol with 156 ng insert and 52 ng plasmid. Ligation was incubated over night in fridge at 4-16&deg; C. <br><br>
-All 4 sporulation plates were checked but still no tetrads visible. <br><br>
-<strong>2010-08-05</strong><br>
-Malin and Julia<br><br>
-III and IV were digested using the regular protocol. <br>
-<strong>III: </strong> HindIII and BamHI works with Buffer B<br>
-<strong>IV: </strong> PacI and BcuI works with Buffer M<br><br>
-A 1% gel was run with uncut and digested III and IV, control, I and &Beta;. I worked well and will be purified. The &Beta; lane showed no bands. None of the digested products were visible on the gel so a new gel was run trying to verify this result. The control shows a band around 1700 which is weird. This band is also visible on the III uncut but together with a band around 750 bp. No bands at the IV which is very strange since this PCR product has been verified before. Have something gone wrong with the purification? <br><br>
-As a result PCR reactions III and IV will be redone. New PCR reactions of &Gamma; and &alpha; were also performed in the same block. <br><br>
-Karl and Kemal<br><br>
-Reactions of &Beta; were made. &Beta;1 is a continuation of the 100 cycle PCR this time with primers. &Beta;2 uses a megaprimer approach. <br><br>
-All the PCR products were run on a 1 % agarose gel. III, IV and &Gamma; were alright. &alpha; and &Beta;2 showed a band around 750 bp. <br>
-<strong>III: </strong> 531.3 ng/&micro;l<br>
-<strong>IV: </strong> 263.9 ng/&micro;l<br><br>
-<strong>2010-08-04</strong><br>
+	if(false == $(this).next().is(':visible')) {
-Julia and Karl<br><br>
+		$('#accordion > ul').slideUp(300);
-PCR products &Beta; were loaded on a 0.7 % gel. No correct bands, only amplified templates around 750 bp and something else around 500 bp. <br><br>
+	}
-PCR of SAMS will also be redone from scratch. PCR reactions 1, 2 and C are done, then loaded on a gel (2 % gel and low range ladder) and purified. <br>
+	$(this).next().slideToggle(300);
-<strong>1: </strong>8.2 ng/&micro;l<br>
+});
-<strong>2: </strong>7.8 ng/&micro;l<br>
-<strong>C: </strong>4.9 ng/&micro;l<br>
-Samples diluted to 1 ng/&micro;l. <br><br>
-PCR of &Beta; was done again but this time in two steps and with the Finnzymes Tm which corresponds to an annealing temp at 85 &deg;C. Firstly 10 cycles without primers were performed. <br><br>
-Kemal and Lokesh<br><br>
-Second round of PCR with primers were performed. Then new PCR reactions amplifying III and IV were done and also reaction I. <br>
-<strong>III: </strong>572 ng/&micro;l<br>
-<strong>IV: </strong> 660 ng/&micro;l<br><br>
-The sporplates were checked and very few tetrads were seen. <br><br>
-&Beta; samples were put on a gel but no correct bands visible. We suspect that the reverse primer is attaching in the wrong place since YFP and CFP is so similar which then would lead to 750 bp fragment. <br><br>
-<strong>2010-08-03</strong><br>
-Malin and Lokesh<br><br>
-PCR products II, III and IV were verified and purified from a 1 % agarose gel. III did not work and was not purified. <br><br>
-Concentrations: <br>
-<strong>II: </strong>6.2 ng/&micro;l <br>
-<strong>IV: </strong> 5.6 ng/&micro;l<br>
-II and IV were diluted to 1 ng/&micro;l. <br><br>
-The new sporplates were examined but no tetrads visible. To check further the cells were stained with DAPI and examined in fluorescence microscope. Still no success. <br><br>
-New PCR reactions were prepared. III was redone and &Beta; was also done. Same settings as yesterday. <br><br>
-Kemal and Karl<br><br>
-PCR products were loaded on a 1% agarose gel for verification and purification. III worked this time and was purified from the gel using the protocol from QIAquick Gel Extraction Kit. <br>
-<strong>III: </strong>6.4 ng/&micro;l<br><br>
-New PCR of &Beta; was run with two different block settings. <br>
-<strong>Block A: </strong>increased annealing time to 1 min. <br>
-<strong>Block B: </strong>increased annealing time to 58 &deg;C. <br><br>
-<strong>2010-08-02</strong><br>
-Kemal, Lokesh and Karl<br><br>
-PCR products A, B and 3 were loaded on a gel and then purified from the gel using the protocol from QIAquick Gel Extraction Kit. &alpha; and IV were also run on a gel but only showed strong bands corresponding to amplified templates. On the &alpha; lane however a very light band was seen at the correct length. This will be further investigated. <br><br>
-Malin and Julia<br><br>
-The purified PCR products were measured with nanodrop: <br>
-<strong>A1: </strong>11.8 ng/&micro;l<br>
-<strong>A2: </strong>10.2 ng/&micro;l<br>
-<strong>B1: </strong>9.6 ng/&micro;l<br>
-<strong>B2: </strong>17.1 ng/&micro;l<br>
-<strong>31: </strong>15.0 ng/&micro;l<br>
-<strong>32: </strong> 16.3 ng/&micro;l<br><br>
-A, B and 3 were diluted to 1 ng/&micro;l. <br><br>
-PCR products 4 and 5 were loaded on a 1 % agarose gel together with IV that should be controlled. PCR products 4 and 5 were correct so they were purified from the gel using the protocol from QIAquick Gel Extraction Kit. IV however was not correct. Only a band around 750 bp was visible. <br><br>
-Concentrations: <br>
-<strong>4: </strong> 10.8 ng/&micro;l<br>
-<strong>5: </strong> 10.4 ng/&micro;l<br>
--5 were diluted to 1 ng/&micro;l. <br>
-New PCR reactions were started (II, III and IV). PCR settings that works well with the Phusion enzyme was set: <br>
-Initial denaturation: 98 &deg;C 3 min<br>
-Denaturation: 98 &deg;C 10 s<br>
-Annealing: 55 &deg;C 30 s<br>
-Elongation: 72 &deg;C 1.5 min+ 1s/cycle<br>
-cycles<br>
-Final extension: 72 &deg;C 10 min<br>
-&deg;C forever     <br><br>
-<strong>2010-07-30</strong><br>
-Julia and Katarina<br><br>
-The concentration of the purified plasmids were measured with nanodrop: <br>
-<strong>P1: </strong>1.7 ng/&micro;l<br>
-<strong>P2: </strong>3.5 ng/&micro;l<br>
-<strong>P3: </strong>25.9 ng/&micro;l<br>
-<strong>P4: </strong>42.8 ng/&micro;l<br>
-This is clear evidence that water should be used for eluation in the future! <br><br>
-To make sure that we have the right products after purification a 1 % agarose gel was run with fastruler DNA ladder. The gel verified the plasmid size though the bands were light. <br><br>
-PCR product III was evaporated since it was so dilute. New concentration: <br>
-<strong>IIId: </strong> 35 ng/&micro;L<br><br>
-The digested PCR product III and the digested plasmid were ligated with T4 ligase. The DNA concentration in total should not exceed 1 &micro;g. The ratio insert:vector should be 3:1. <br><br>
-<strong>Ligation protocol: </strong><br>
-ng insert<br>
-ng vector<br>
-&micro;l 10x T4 buffer<br>
-.5 &micro;l (2.5 U, between 1-5 U) T4 ligase<br>
-Adjust volume with water up to 30 &micro;l. Mix and incubate in 4-16 &deg;C (refrigerator) overnight. <br>
-The newly plated sporplates were moved to 30&deg;C. The old sporplates were again studied in the microscope and no tetrads were seen. <br><br>
-Kemal and Lokesh<br><br>
-Since we have had a lot of trouble with the longer fusions we will start over from scratch with a new high fidelity polymerase called “Finnzumes Phusion”.  New PCR reactions were run (A, B, 3, 4 and 5). IV and &alpha; were also performed using alternative settings (2 different PCR reactions described before) but with “old” templates. <br><br>
-<strong>2010-07-29</strong><br>
-Julia and Katarina<br><br>
-PCR product III is the final fusion protein where Snf4 is tagged with yfp. To be able to insert the construct into the plasmid we must digest it. <br><br>
-Digestion: Mix DNA, buffer and water. Last add enzyme and mix. Incubate at 37&deg; C for 1 hour. <br>
-&micro;g DNA<br>
-.5 &micro;l Buffer<br>
-U Enzyme<br>
-Up to 25 &micro;l H2O<br>
-For PCR product III, the restriction enzymes BamHI and HindIII are used together with buffer B. After digestion (the protocol was scaled 3x) the sample was loaded on a 1 % agarose gel in 6 lanes with 1 kb ladder. The bands were cut out and weighed. The samples were purified from the gel using the protocol from QIAquick Gel Extraction Kit. The DNA was eluated with water. <br><br>
-Concentration: <br>
-<strong>IIId: </strong> 5 ng/&micro;l (Total product 160 &micro;l= 800 ng) <br><br>
-Kemal and Lokesh<br><br>
-The plasmids were also digested with BamHI and HindIII according to the same protocol as above. P1 and P2 were eluated with buffer EB and P3 and P4 with water. <br><br>
-new sporulation plates were prepared by plating the diploid yeast cells on spore plates and kept at room temperature. <br><br>
-<strong>2010-07-28</strong><br>
-Julia and Katarina<br><br>
-The PCR products were run on a 1 % gel with 1 kb ladder. &Gamma; may have worked.  &alpha; and &Beta; had a band around 750 bp and a weird light band around 500 bp. They obviously did not work. IV did not work at all. <br><br>
-The sporulation plates were checked for spores. Cells were studied under a microscope. No tetrads visible. <br><br>
-<strong>2010-07-27</strong><br>
-Julia and Katarina<br><br>
-A 1.5 % gel was run with all of the fragments around 700 bp to control the validity of the PCR reactions. A low range ladder was used.  PCR products 1-5 seems good. The results from yesterday were confirmed. <br><br>
-A new PCR design was made with &alpha;, &Beta;, &Gamma; and IV. PCR was done in two steps to increase the chance of success for longer fusions. <br>
-. 7 cycles with short annealing time. <br>
-. 20 cycles with long annealing time (all other settings kept standard). <br><br>
-<strong>2010-07-26</strong><br><br>
-A new experiment were designed called &Gamma; which is the same as I but with longer annealing region. Also an experiment called &Delta; were designed which corresponds to II. <br><br>
-Julia and Katarina<br><br>
-PCR reactions were run with samples of 4, IV and &Gamma;. IV was tried with two different PCR settings: one regular and one with two runs of PCR, the first without primers and only 5 cycles and the second one with regular settings. <br><br>
-Kemal and Lokesh<br><br>
-The PCR products were controlled on a 0.7% agarose gel. Only 4 worked. &Gamma; was empty and IV had bands in the wrong place (amplified template). <br>
-<strong>4: </strong> 534 ng/ &micro;l<br><br>
- </tr></td>
-<tr><td> <strong>2010-07-22</strong><br>
-Karl, Lokesh and Kemal<br><br>
-A new mastermix was prepared using a different enzyme. Then the experiments from yesterday was redone using regular PCR settings: <br>
-A, 5, 2, I<br>
-Then some more experiments of IV was redone: <br>
-a, 2b and 2c<br>
-The new primer 14 had arrived so PCR reaction 4 was also redone. <br><br>
-All the PCR products were run on a 0.7 % agarose gel with GeneRuler 1 kb DNA ladder. The results were inconclusive. None of the expected bands were received.  At this point we are not sure what to do since none of the PCR reactions worked. <br><br>
-<strong>2010-07-21</strong><br>
-Malin, Julia, Karl and Lokesh<br><br>
-<strong>Verification of the PCR products </strong>&alpha;1, &alpha;2, &alpha;3, &alpha;4, &alpha;5 and &alpha;K by running on a thin 0.7 % agarose gel (8 &micro;l sample+ 2 &micro;l loading buffer, GeneRuler 1 kb DNA ladder). <br><br>
-The gel didn’t show the expected band lengths. A band around 700 bp could be seen, most strongly for &alpha;4 and &alpha;5.  We suspect that there is something wrong with the ladder because we get inconclusive results. Since none of the PCR reactions for the last couple of days have worked we will redo the templates of &alpha; and IV: I, 2, 5 and A. These PCR reactions have worked before. <br><br>
-<strong>Expected fragment length: </strong><br>
-A.2: 1938 bp<br>
-.2: 757 bp<br>
-.2: 762 bp<br>
-I.2: 768 bp<br><br>
-The PCR products were run on a thin 0.7 % agarose gel. We used both the FastRuler High Range Ladder and the GeneRuler 1 kb DNA ladder. 5.2 and 2.2 showed the expected bands around 750 bp. I.2 and A.2 did not work at all, nothing visible on the gel.  We also run some of the old PCR products to see what the result would be using a new ladder. We run &alpha;2, &alpha;5, 4c (IV) and 4c*(IV). Here some template amplifications were visible but sadly none of the expected fragment lengths. Both ladders showed the same result so there is probably nothing wrong with the GeneRuler ladder except that it is not showing strong color. <br><br>
-<strong>2010-07-20</strong><br>
-Malin, Julia, Lokesh and Karl<br><br>
-<strong>Verification of yesterdays PCR reactions </strong>by running on a 0.7 % agarose gel (8 &micro;l sample+ 2 &micro;l loading buffer, GeneRuler 1 kb DNA ladder) <br><br>
-None of the reactions worked. <br><br>
-Gel 1 (Block A): Nothing visible on gel, ladders only very light so these samples were run on a new 0.7 % agarose gel but this time thinner to get better resulotion (0.58 g agarose + 80 ml TBE). This time no expected fragments were seen, but bands corresponding to primer dimers were clearly seen. <br>
- Gel 2 (Block B): A few small bands were seen but no bands of expected length. <br><br>
-We decided to stop working on IV until proper feedback on the experimental setup was received. Instead we continued with &alpha;.<br><br>
-<strong>Doing another PCR round of &alpha; (SAMS peptide): </strong> <br>
-<strong>&alpha;: PCR fusion of cfp-SAMS and yfp: </strong>Adds BamHI on N-terminus of cfp and HindIII on C-terminus of yfp and keeps the stop codons. Expected fragment length: 1502 bp. <br><br>
-&alpha;1: regular protocol. <br>
+$('#accordion > ul:eq(0)').show();
-&alpha;2: regular protocol. <br>
-&alpha;3: 1.25 &micro;l extra primer 9.<br>
-&alpha;4: 1.25 &micro;l extra primer 12. <br>
-&alpha;5: 1.25 &micro;l extra primer 9 and 1.25 &micro;l primer 12. <br>
-&alpha;K: Control<br>
-Regular PCR-settings<br><br>
-<strong>2010-07-19</strong><br>
-Karl, Peidi and Kemal<br><br>
-<strong>Doing a new experimental setup for IV: </strong><br>
-<strong>IV. PCR fusion of cfp and Snf1: </strong>Adds SpeI on N-terminus of cfp and PacI on C-terminus of Snf1 and keeps the stop codon. Expected fragment length: 2643 bp. <br><br>
-different tubes were prepared and run at two different PCR-settings. Block A: Regular settings except double annealing time (1 min). Block B:  Regular settings except 58&deg; C annealing temperature. <br><br>
-C : Control<br>
-a: same as 2* (template 5 5 x diluted) <br>
-b. same as 3* (template 5 10 x diluted) <br>
-c: same as 4* (template 5 100x diluted) <br>
-a: increased product A concentration to 5 ng/&micro;l. <br>
-b: increased product A concentration to 10 ng/&micro;l. <br>
-a: same as 5* (2x primer 7) <br>
-b: same as 6* (template 5 diluted 5x, 2x primer 7) <br>
-c: same as 7* (template 5 diluted 10x, 2x primer 7) <br>
-d same as 8* (template 5 diluted 100x, 2x primer 7) <br>
-a: 2x primer 7. <br>
-b: 2x primer 7, 5x template A. <br>
-c: 2x primer 7, 10 x template A. <br><br>
-<strong>2010-07-16</strong><br>
-Lokesh, Kemal, Katarina and Peidi<br><br>
-<strong>Verification of PCR </strong>reactions IV* (8 tubes) and &alpha; on a 0.7 % agarose gel (5 &micro;l sample+ 2&micro;l loading buffer, GeneRuler 1 kb DNA ladder). <br><br>
-No bands visible. None of the PCR reactions worked, just small bands visible corresponding to primers. The &alpha; PCR reaction messed the tubes up. That might be an explanation why there were no bands on the gel for &alpha;.  A new experimental setup must be made tomorrow. <br><br>
-PCR products I and 2 were run with a low range ladder to see that those products are ok. That gel was satisfactory. <br><br>
-<strong>2010-07-15</strong><br>
-Malin, Julia, Kemal and Karl<br><br>
-<strong>Concentrations of PCR products: </strong><br>
-.2. 356.2 ng/&micro;l<br>
-I. 338.3 ng/&micro;l<br>
-II. 303.6 ng/&micro;l<br>
-III. 337.5 ng/&micro;l<br>
-IV. 280.9 ng/&micro;l<br><br>
-All PCR-products were diluted to 1 ng/&micro;l. <br><br>
-<strong>Verified PCR products</strong> I-IV and 4.2 on a 0.7 % Agarose Gel (8 &micro;l sample + 2&micro;l loading buffer, GeneRuler 1 kb DNA ladder) <br>
-PCR products I, II and III were good but 4.2 showed no bands at all. After primer design control we found a problem with primer 14, which then was ordered again. IV had only a band around 700 bp instead of 2600.  This might be template 5, which then has been amplified. If the settings are changed maybe it will work. Firstly the template 5 will be diluted 0x, 5x, 10x and 100x (4 tubes: 1*, 2*, 3* and 4*) and these dilutions will also be run with higher primer concentration 7 (4 tubes: 5*, 6*, 7* and 8*).  2.5 &micro;l primer 7 will be added instead of 1.25 &micro;l primer 7. <br><br>
-New PCR reactions were run: <br>
-<strong>&alpha;: PCR fusion of cfp-SAMS and yfp: </strong> Adds BamHI on N-terminus of cfp and HindIII on C-terminus of yfp and keeps the stop codons. Expected fragment length: 1502 bp. <br>
-K4. Control. <br><br>
-<strong>IV *: PCR fusion of cfp and Snf1: </strong>Adds SpeI on N-terminus of cfp and PacI on C-terminus of Snf1 and keeps the stop codon. Expected fragment length: 2643 bp. <br>
-Half volume 25 &micro;l. Regular PCR settings except 56 &deg;C annealing temperature. <br>
-*;- 8*<br>
-K1*. Control for 1-4*.<br>
-K2*. Control for 5-8*.<br><br>
-</td></tr>							<tr>
-<tr><td><p><strong>2010-07-14</strong><br>
-Julia and Katarina <br>
-<strong>Ran PCR 1-5.</strong><br>
-. Amplification of cfp-sams compatible: Add restriction enzyme site BamHI on N-terminus +SAMS on C-terminus.<br> Expected fragment length: 748 bp.<br>
-. Amplification of yfp-SAMS competible: Adds restriction enzyme site for HindIII on C-terminus and SAMS tail on N-terminus. <br>Expected fragment length: 762 bp.<br>
-. Amplification of yfp-snf4 compatible: Adds restriction enzyme site BamHI on N-terminus and Snf4 tail on C-terminus. <br>Expected fragment length: 755 bp.<br>
-. Amplification of cfp-Snf4 compatible: Adds restriction enzyme site HindIII on C-terminus and Snf4 tail on N-terminus. <br>Expected fragment length: 769 bp.<br>
-. Amplification of cfp-snf1 compatible: Adds restriction enzyme site SpeI on N-terminus and Snf1 tail on C-terminus.<br> Expected fragment length: 757 bp.<br>
-K2. Control K2.<br><br>
-Julia, Katarina and Malin<br>
+</SCRIPT>
-<strong>Verified PCR 1-5:</strong> measured concentration by nanodrop and checked if the fragments were the correct length by running on a 2 % agarose gel (8 &micro;l sample+2 &micro;l loading buffer, Fermentas FastRuler Low Range).<br>
+  </div>
-PCR product 1, 2, 3 and 5 worked and gave expected fragment lengths. Number 4 however did not work.  Only a fragment around 80 bp was visible, probably a primer dimer.<br><br>
-<strong>Concentrations:</strong><br>
-. 443.9 ng/&micro;l<br>
-. 371.0 ng/&micro;l<br>
-. 361.7 ng/&micro;l<br>
-. --<br>
-. 377.6 ng/&micro;l<br>
-A. 451.1 ng/&micro;l (snf1)<br>
-B. 438.7 ng/&micro;l (snf4)<br>
-C. 408.9 ng/&micro;l (SAMS) <br>
--5 and A-C were diluted to 1 ng/&micro;l.<br><br>
-<strong>Ran PCR of I, II, III, IV and 4.</strong><br>
-.2.  Amplification of cfp-Snf4 compatible: Adds restriction enzyme site HindIII on C-terminus and Snf4 tail on N-terminus. Expected fragment length: 769 bp. (second try)<br>
-I. PCR fusion of cfp and SAMS: Adds BamHI on N-terminus of cfp and gives a SAMS C-terminus. Expected fragment length: 768 bp.<br>
-II. PCR fusion of yfp and Snf4 1: Adds BamHI on N-terminus of yfp and removes stop codon. Expected fragment length: 1694 bp.<br>
-III. PCR fusion of yfp and Snf4 2: Adds BamHI on N-terminus of yfp and adds HindIII on C-terminus of Snf4 plus adds stop codon. Expected fragment length: 1708 bp. Final Product!<br>
-IV. PCR fusion of cfp and Snf1: Adds SpeI on N-terminus of cfp and PacI on C-terminus of Snf1 and keeps the stop codon. Expected fragment length: 2643 bp.<br>
-K3. Control<br><br>
-Karl and Malin<br>
+<div id="center">
-Transferred diploid cells of snf1&Delta; mutants to two sporulation plates and incubated in 30&deg; C. (For 2-7 days)<br>
-</td></tr>
-							  <td><p><strong>2010-07-13</strong><br>
+				<div id="Title2"><ul id="sddm">
-Julia and  Lokesh<br>
+    <li><a href="https://2010.igem.org/Team:Gothenburg-Sweden">Home</a></li>
-Ran the gel  with products of our first three PCRs along with the templates we made for the  two fluorescent proteins. We also prepared the sample solutions of DNA  templates with appropriate concentration (1ng/µl) for the next PCR reactions.<br>
+    <li id="active"><a href="https://2010.igem.org/Team:Gothenburg-Sweden/Project"
-<strong>Verified</strong> the PCR products and the digested miniprepped  EYFP and ECFP by running an agarose gel which showed good results. Expected  fragment lengths were received. The SAMS-peptide however was too short to be  visible on the gel (67 bp).<br>
+        onmouseover="mopen('m1')"
-<strong>Prepared for PCR 1-5. </strong>The miniprepped ECFP and EYFP were  diluted to a stock concentration of 1 ng/ ml to use for the PCR.  The concentrations of the first PCR product  were measured using nanodrop and then diluted to 1 ng/ml.<br>
+        onmouseout="mclosetime()"  >Project</a>
-snf1: 20.5 ng/ml<br>
+        <div id="m1"
-snf4: 122.6 ng/ml<br>
+            onmouseover="mcancelclosetime()"
-SAMS: 114.9 ng/ml<br></p>
+            onmouseout="mclosetime()">
-Karl and  Adnan<br>
+        <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Project">Description</a>
-We made  duplicates of the haploid Snf4∆ and wildtype strains on new plates in case the  original plate would be contaminated. Prepared a sporulation medium that was  autoclaved and poured into empty growth plates to stay in room temperature over  night.</p>
+        <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note">Lab Notes</a>
-							    <p><br>
+        <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Results">Results</a>
-                                  <strong>2010-07-12</strong><br>
+        </div>
-                                  Katarina  and Julia<br>
+    </li>
-                                  <strong>Amplification of genomic SNF1 DNA by PCR. </strong>All primers were resuspended in  mq-water according to the volume on the lable, the final concentration 100 pg/ml. The primers were then diluted 10x  and the SAMS-peptide templates were diluted 1000x. PCR reactions were run  amplifying subunits Snf1 and Snf4 and also the SAMS-peptide. YPD medium and  agar plates were prepared (yeast).<br></p>
-                                  Adnan and  Kemal<br>
+    <li><a href="https://2010.igem.org/Team:Gothenburg-Sweden/About_us"
-                                  <strong>Miniprep purification </strong>of EYFP and ECFP plasmides from  overnight culture. The concentrations were measured using Nanodrop:<br>
+        onmouseover="mopen('m2')"
-                                  ECFP1: 99 ng/ml<br>
+        onmouseout="mclosetime()">Team</a>
-                                  ECFP2: 89.9<br>
+        <div id="m2"
-                                  EYFP1: 104, 7 <br>
+            onmouseover="mcancelclosetime()"
-                                  EYFP2: 172,5<br>
+            onmouseout="mclosetime()">
-                                  The  concentrations were verified with electrophoresis. The plasmids were cut with  restriction enzymes EcoRI and Pst1.<br>
+		<a href="#">Chalmers University of Technology</a>
-                                  ECFP, plasmid pSB1AK3, fragment sizes 750 bp and 3200 bp.<br>
+        <a href="#">Supervisors</a>
-                                  EYFP, plasmid pSB1A2, fragment sizes 750 bp and 2050 bp.</p>
+        <a href="#">Students</a>
-							    <p><br>
+        </div>
-                                  <strong>2010-07-11</strong><br>
+    </li>
-                                  Katarina<br>
-                                  Made  overnight cultures with colony 3 and 4 plasmid (not single cultures) and twp  each of EYFP and ECFP.<strong></strong></p>
+    <li><a href="https://2010.igem.org/Team:Gothenburg-Sweden/Sponsors">Sponsors</a></li>
-							    <p><br>
+    <li><a href="https://2010.igem.org/Team:Gothenburg-Sweden/Contact">Contact Us</a></li>
-                                  <strong>2010-07-10</strong><br>
+</ul>
-                                  Julia<br>
+<div style="clear:both"></div></div>
-                                  Moved  plated bacteria from incubator to refrigerator. <br>
+			<div id="text">
-                                  </p>
+			</br>
-							    <p><strong>2010-07-09</strong><br>
-                                  Malin and  Julia<br>
+                         <div class="h1">Preliminary Study</div>
-                                  The SOC  medium was autoclaved. Competent E.coli cells were transformed with our FPs  through heat shock and plated on petri dishes. 20 new LB-amp plates were made.<br></p>
-                                  Adnan and  Katarina<br>
+                               </br>
-                                  Picked up  primers at Chalmers and checked if they were ok. The concentration of the  genomic DNA (SNF1 gene) were measured. Prepared a master mix so that the  PCR-reactions could be started Monday morning.<strong></strong><br>
-                                  </p>
+				        <div class="logo"> <img src="https://static.igem.org/mediawiki/2010/f/fe/Gfp.png" width="40" height="40" align="left"></div> <strong><p>Fluorescent  Proteins:</strong><br>  Green Fluorescent Protein <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#FP">(read more)</a></p><br>
-							    <p><strong>2010-07-08</strong><br>
-                                  Malin,  Julia and Peidi<br>
-                                  The two  BioBricks EYFP and ECFP were extracted from the kit plates and stored in the  freezer. A SOC-medium was prepared.<br>
-                                  </p>
-							    <p><strong>2010-07-07 </strong><br>
-                                  Adnan,  Katarina and Julia<br>
-                                  As the gels  from Tuesday showed ambigous results we decided to redo the miniprep of the  plamids. We used the overnight preparations of the two unused colonies (3 &amp;  4). The miniprep went smoothly except for major difficulties regarding  untrustworthy pipettes. The pipettes marked with green tape are the ones to use  from now on together with the tips with the same markings! A gel was molded and  this time we decided to use a full gel to get a better resolution.  The results on the gel were very good.  The plasmids had clearly been cut in one or  two places and the fragment sizes seem to correspond to the expected sizes.<br>
-                                  </p>
-							    <p><strong>2010-07-06</strong><br>
-                                  Malin, Adnan and Peidi<br>
-                                  Colony 1 and 2 were picked to do a miniprep.  The plasmids were extracted and a plasmid integrity check was performed. By  cutting with BamHI, one cut were made to get the size of the plasmid. Then we  cut with ClaI which is a two-cutter that gives a fragment that is 600 bp and  one that is 6800. The gel which should confirm this was not satisfactory since  the 600 band was missing.<br>
-                                  </p>
-							    <p><strong>2010-07-05</strong><br>
-                                  Malin and Katarina<br>
-                                  An overnight culture were made from 4 different  colonies of E.coli containing the plasmid pSB-GM1.</p></td>
-							</tr>
-							<tr>
-								<td class="bg2"><img src="https://static.igem.org/mediawiki/2010/2/23/Spacer.jpg" alt="" width="100" height="1" /></td>
-							</tr>
-							<tr>
-								<td><img src="https://static.igem.org/mediawiki/2010/2/23/Spacer.jpg" alt="" width="30" height="20" /></td>
-							</tr>
-					  <tr>
-					<td>&nbsp;</td>
-				</tr>
-				<tr>
-					<td class="text5">pictures</td>
-				</tr>
-				<tr>
-					<td>&nbsp;</td>
-				</tr>
-											<tr>
-							  <td>&nbsp;</td>
-					  </tr>
-							<tr>
-							  <td><h1 class="STYLE5"><img src="https://static.igem.org/mediawiki/2010/d/d2/Gel_plasmid.jpg" alt="gel_plasmid" width="300" height="213"></h1>
-						        <table width="541" border="1">
-                                  <tr>
-                                    <td>PIC 1: Gel of plasmid (cut) </td>
-                                  </tr>
-                                </table></td>
-					  </tr>
+					 <div class="logo"> <img src=" https://static.igem.org/mediawiki/2010/a/a9/Plasmid.png" width="40" height="40" align="left"></div><p><strong>Plasmid backbone:</strong> <br>
+                      pSP-GM1 <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#plasmid">(read more)</a></p> <br>
+				    <div class="logo"> <img src="https://static.igem.org/mediawiki/2010/7/74/Snf1Com.png" width="40" height="40" align="left"></div><p> <strong>SNF1  (modified subunits):</strong><br>
+                   Snf1 (alfa), Snf4 (gamma) <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#SNF1">(read more)</a></p> <br>
+				   <div class="logo"> <img src="https://static.igem.org/mediawiki/2010/4/46/FpPos.png" width="40" height="40" align="left"></div> <p> <strong>FP  positions:</strong> <br>
+                    N-terminal alfa with N-terminal gamma, N-terminal gamma with C-terminal gamma <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#position">(read more)</a></p> <br>
-						<tr>
+				    <div class="logo"> <img src="https://static.igem.org/mediawiki/2010/e/e0/PrDesign.png" width="40" height="40" align="left"></div> <p> <strong>Primer  design:</strong><br>
-							  <td>&nbsp;</td>
+                    Fusion primers with restiriction enzyme sites included at very ends, each annealing part was desinged with an melting temperature of around 60 C <a href="https://2010.igem.org/Team:Gothenburg-Sweden/Lab_Note/pre#primer">(read more)</a></p> <br>
-					  </tr>
-						</table></td>
-				</tr>
-	  </table></td>
+                             <div id="myTitle">Lab work by date </div>
-	</tr>
+                             <ul><li><p> <strong>2010-08-11</strong><br>
-</table>
+                               Malin and Katarina<br>
-<table width="730" border="0" align="center" cellpadding="0" cellspacing="0">
+                               <br>
-	<tr>
+                               The PCR reaction from yesterday was checked on a gel. α should be around 1500 bp but only a band around 750 bp was seen. We had a long meeting with supervisor Per about PCR reactions and the next couple of weeks in the lab. <br>
-		<td><img src="https://static.igem.org/mediawiki/2010/d/da/Img6.jpg" alt="" width="100%" height="2" /></td>
+                               <br>
-	</tr>
+                               Karl and Kemal <br>
-	<tr>
+                               <br>
-		<td>&nbsp;</td>
+                               Ran PCR reaction α with different settings. <br>
-	</tr>
+                               <strong>α1: </strong>regular settings<br>
-	<tr>
+                               <strong>α2: </strong>10 x diluted template 2<br>
-		<td align="center" class="style1"><a href="https://2010.igem.org/Team:Gothenburg-Sweden">Home</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;       |&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;       <a href="https://2010.igem.org/Team:Gothenburg-Sweden/About_us">About us </a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;       |       &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<a href="http://www.chalmers.se/en/">Chalmers</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;       |       &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<a href="https://2010.igem.org/Team:Gothenburg-Sweden/Sponsors">Sponsors</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;       |       &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<a href="https://2010.igem.org/Team:Gothenburg-Sweden/Contact">Contact Us</a></td>
+                               <strong>α3: </strong>increased annealing time from 30 s to 60 s<br>
-	</tr>
+                               <strong>α4: </strong>decreased annealing temperature<br>
-	<tr>
+                               <br>
-		<td align="center" class="style1">Design in Chalmers, Gothenburg, Sweden </td>
+                               After PCR, the products were run on a gel. α1, α3 and α 4 had a band around 750 bp but nothing on α2. </p></li><br>
-	</tr>
+                               <br>
-	<tr>
+                              <li><p> <strong>2010-08-10</strong><br>
-		<td align="center"><img src="https://static.igem.org/mediawiki/2010/2/23/Spacer.jpg" alt="" width="30" height="30" /></td>
+                               Peidi and Lokesh<br>
-	</tr>
+                               <br>
-</table>
+                               Checked the transformation plates but nothing had grown. Prepared PCR reaction Γ. <br>
-<div style="text-align: center; font-size: 0.75em;"></div>
+                               <br>
+                               Katarina and Kemal<br>
+                               <br>
+                               PCR product Γ was verified on a 0.7 % agarose gel. There was a band around 750 bp as expected and it was purified using the regular protocol. A new phusion mastermix was made and PCR reaction α was run with Γ as one of the template. Regular phusion PCR settings was used. <br>
+                               <br></p></li>
+                               <li><p><strong>2010-08-09</strong><br>
+                               Malin and Kemal<br>
+                               <br>
+                               Before checking if the ligation worked we need to transform and amplify in E.coli. Then we can miniprep the ligated plasmid and check on a gel. After that we can digest plasmid with PacI and BcuI and ligate the digested IV. Then another round of transformation and miniprep before we can transform yeast. <br>
+                               <br>
+                               Karl and Lokesh<br>
+                               <br>
+                               Transformed competent E.coli with plasmid ligated with III by heat shock. The cells were incubated at 37 °C over night. <br>
+                               <br></p></li>
+                              <li><p> <strong>2010-08-07</strong><br>
+                               Lokesh<br>
+                               <br>
+                               Moved ligation tube to freezer. <br>
+                               <br></p></li>
+                             <li><p>  <strong>2010-08-06</strong><br>
+                               Malin, Julia and Lokesh<br>
+                               <br>
+                               III and IV were digested 3x protocol and were then put on a 1 % agarose gel together with Γ both for verification and purification. Correct bands were seen for purification except for Γ which was empty. In the verification lanes the digested PCR products were to light to be seen but they were seen in purification lanes. IIId and IVd were purified. <br>
+                               <br>
+                               <strong>IIId: </strong>7.8 ng/µl<br>
+                               <strong>IVd: </strong>11.7ng/µl<br>
+                               <br>
+                               IIId will now be ligated with the cut plasmid (BamHI and HindIII). Ligation performed according to protocol with 156 ng insert and 52 ng plasmid. Ligation was incubated over night in fridge at 4-16° C. <br>
+                               <br>
+                               All 4 sporulation plates were checked but still no tetrads visible. <br>
+                               <br></p></li>
+                               <li><p>  <strong>2010-08-05</strong><br>
+                               Malin and Julia<br>
+                               <br>
+                               III and IV were digested using the regular protocol. <br>
+                               <strong>III: </strong>HindIII and BamHI works with Buffer B<br>
+                               <strong>IV: </strong>PacI and BcuI works with Buffer M<br>
+                               <br>
+                               A 1% gel was run with uncut and digested III and IV, control, I and Β. I worked well and will be purified. The Β lane showed no bands. None of the digested products were visible on the gel so a new gel was run trying to verify this result. The control shows a band around 1700 which is weird. This band is also visible on the III uncut but together with a band around 750 bp. No bands at the IV which is very strange since this PCR product has been verified before. Have something gone wrong with the purification? <br>
+                               <br>
+                               As a result PCR reactions III and IV will be redone. New PCR reactions of Γ and α were also performed in the same block. <br>
+                               <br>
+                               Karl and Kemal<br>
+                               <br>
+                               Reactions of Β were made. Β1 is a continuation of the 100 cycle PCR this time with primers. Β2 uses a megaprimer approach. <br>
+                               <br>
+                               All the PCR products were run on a 1 % agarose gel. III, IV and Γ were alright. α and Β2 showed a band around 750 bp. <br>
+                               <strong>III: </strong>531.3 ng/µl<br>
+                               <strong>IV: </strong>263.9 ng/µl<br>
+                               <br></p></li>
+                              <li><p> <strong>2010-08-04</strong><br>
+                               Julia and Karl<br>
+                               <br>
+                               PCR products Β were loaded on a 0.7 % gel. No correct bands, only amplified templates around 750 bp and something else around 500 bp. <br>
+                               <br>
+                               PCR of SAMS will also be redone from scratch. PCR reactions 1, 2 and C are done, then loaded on a gel (2 % gel and low range ladder) and purified. <br>
+                               <strong>1: </strong>8.2 ng/µl<br>
+                               <strong>2: </strong>7.8 ng/µl<br>
+                               <strong>C: </strong>4.9 ng/µl<br>
+                               Samples diluted to 1 ng/µl. <br>
+                               <br>
+                               PCR of Β was done again but this time in two steps and with the Finnzymes Tm which corresponds to an annealing temp at 85 °C. Firstly 10 cycles without primers were performed. <br>
+                               <br>
+                               Kemal and Lokesh<br>
+                               <br>
+                               Second round of PCR with primers were performed. Then new PCR reactions amplifying III and IV were done and also reaction I. <br>
+                               <strong>III: </strong>572 ng/µl<br>
+                               <strong>IV: </strong>660 ng/µl<br>
+                               <br>
+                               The sporplates were checked and very few tetrads were seen. <br>
+                               <br>
+                               Β samples were put on a gel but no correct bands visible. We suspect that the reverse primer is attaching in the wrong place since YFP and CFP is so similar which then would lead to 750 bp fragment. <br>
+                               <br></p></li>
+                               <li><p>  <strong>2010-08-03</strong><br>
+                               Malin and Lokesh<br>
+                               <br>
+                               PCR products II, III and IV were verified and purified from a 1 % agarose gel. III did not work and was not purified. <br>
+                               <br>
+                               Concentrations: <br>
+                               <strong>II: </strong>6.2 ng/µl <br>
+                               <strong>IV: </strong>5.6 ng/µl<br>
+                               II and IV were diluted to 1 ng/µl. <br>
+                               <br>
+                               The new sporplates were examined but no tetrads visible. To check further the cells were stained with DAPI and examined in fluorescence microscope. Still no success. <br>
+                               <br>
+                               New PCR reactions were prepared. III was redone and Β was also done. Same settings as yesterday. <br>
+                               <br>
+                               Kemal and Karl<br>
+                               <br>
+                               PCR products were loaded on a 1% agarose gel for verification and purification. III worked this time and was purified from the gel using the protocol from QIAquick Gel Extraction Kit. <br>
+                               <strong>III: </strong>6.4 ng/µl<br>
+                               <br>
+                               New PCR of Β was run with two different block settings. <br>
+                               <strong>Block A: </strong>increased annealing time to 1 min. <br>
+                               <strong>Block B: </strong>increased annealing time to 58 °C. <br>
+                               <br></p></li>
+                              <li><p> <strong>2010-08-02</strong><br>
+                               Kemal, Lokesh and Karl<br>
+                               <br>
+                               PCR products A, B and 3 were loaded on a gel and then purified from the gel using the protocol from QIAquick Gel Extraction Kit. α and IV were also run on a gel but only showed strong bands corresponding to amplified templates. On the α lane however a very light band was seen at the correct length. This will be further investigated. <br>
+                               <br>
+                               Malin and Julia<br>
+                               <br>
+                               The purified PCR products were measured with nanodrop: <br>
+                               <strong>A1: </strong>11.8 ng/µl<br>
+                               <strong>A2: </strong>10.2 ng/µl<br>
+                               <strong>B1: </strong>9.6 ng/µl<br>
+                               <strong>B2: </strong>17.1 ng/µl<br>
+                               <strong>31: </strong>15.0 ng/µl<br>
+                               <strong>32: </strong>16.3 ng/µl<br>
+                               <br>
+                               A, B and 3 were diluted to 1 ng/µl. <br>
+                               <br>
+                               PCR products 4 and 5 were loaded on a 1 % agarose gel together with IV that should be controlled. PCR products 4 and 5 were correct so they were purified from the gel using the protocol from QIAquick Gel Extraction Kit. IV however was not correct. Only a band around 750 bp was visible. <br>
+                               <br>
+                               Concentrations: <br>
+                               <strong>4: </strong>10.8 ng/µl<br>
+                               <strong>5: </strong>10.4 ng/µl<br>
+-5 were diluted to 1 ng/µl. <br>
+                               New PCR reactions were started (II, III and IV). PCR settings that works well with the Phusion enzyme was set: <br>
+                               Initial denaturation: 98 °C 3 min<br>
+                               Denaturation: 98 °C 10 s<br>
+                               Annealing: 55 °C 30 s<br>
+                               Elongation: 72 °C 1.5 min+ 1s/cycle<br>
+cycles<br>
+                               Final extension: 72 °C 10 min<br>
+°C forever <br>
+                               <br>
+                               <strong>2010-07-30</strong><br>
+                               Julia and Katarina<br>
+                               <br>
+                               The concentration of the purified plasmids were measured with nanodrop: <br>
+                               <strong>P1: </strong>1.7 ng/µl<br>
+                               <strong>P2: </strong>3.5 ng/µl<br>
+                               <strong>P3: </strong>25.9 ng/µl<br>
+                               <strong>P4: </strong>42.8 ng/µl<br>
+                               This is clear evidence that water should be used for eluation in the future! <br>
+                               <br>
+                               To make sure that we have the right products after purification a 1 % agarose gel was run with fastruler DNA ladder. The gel verified the plasmid size though the bands were light. <br>
+                               <br>
+                               PCR product III was evaporated since it was so dilute. New concentration: <br>
+                               <strong>IIId: </strong>35 ng/µL<br>
+                               <br>
+                               The digested PCR product III and the digested plasmid were ligated with T4 ligase. The DNA concentration in total should not exceed 1 µg. The ratio insert:vector should be 3:1. <br>
+                               <br>
+                               <strong>Ligation protocol: </strong><br>
+ng insert<br>
+ng vector<br>
+µl 10x T4 buffer<br>
+.5 µl (2.5 U, between 1-5 U) T4 ligase<br>
+                               Adjust volume with water up to 30 µl. Mix and incubate in 4-16 °C (refrigerator) overnight. <br>
+                               The newly plated sporplates were moved to 30°C. The old sporplates were again studied in the microscope and no tetrads were seen. <br>
+                               <br>
+                               Kemal and Lokesh<br>
+                               <br>
+                               Since we have had a lot of trouble with the longer fusions we will start over from scratch with a new high fidelity polymerase called “Finnzumes Phusion”. New PCR reactions were run (A, B, 3, 4 and 5). IV and α were also performed using alternative settings (2 different PCR reactions described before) but with “old” templates. <br>
+                               <br></p></li>
+                               <li><p><strong>2010-07-29</strong><br>
+                               Julia and Katarina<br>
+                               <br>
+                               PCR product III is the final fusion protein where Snf4 is tagged with yfp. To be able to insert the construct into the plasmid we must digest it. <br>
+                               <br>
+                               Digestion: Mix DNA, buffer and water. Last add enzyme and mix. Incubate at 37° C for 1 hour. <br>
+µg DNA<br>
+.5 µl Buffer<br>
+U Enzyme<br>
+                               Up to 25 µl H2O<br>
+                               For PCR product III, the restriction enzymes BamHI and HindIII are used together with buffer B. After digestion (the protocol was scaled 3x) the sample was loaded on a 1 % agarose gel in 6 lanes with 1 kb ladder. The bands were cut out and weighed. The samples were purified from the gel using the protocol from QIAquick Gel Extraction Kit. The DNA was eluated with water. <br>
+                               <br>
+                               Concentration: <br>
+                               <strong>IIId: </strong>5 ng/µl (Total product 160 µl= 800 ng) <br>
+                               <br>
+                               Kemal and Lokesh<br>
+                               <br>
+                               The plasmids were also digested with BamHI and HindIII according to the same protocol as above. P1 and P2 were eluated with buffer EB and P3 and P4 with water. <br>
+                               <br>
+new sporulation plates were prepared by plating the diploid yeast cells on spore plates and kept at room temperature. <br>
+                               <br></p></li>
+                                <li><p><strong>2010-07-28</strong><br>
+                               Julia and Katarina<br>
+                               <br>
+                               The PCR products were run on a 1 % gel with 1 kb ladder. Γ may have worked. α and Β had a band around 750 bp and a weird light band around 500 bp. They obviously did not work. IV did not work at all. <br>
+                               <br>
+                               The sporulation plates were checked for spores. Cells were studied under a microscope. No tetrads visible. <br>
+                               <br></p></li>
+                               <li><p> <strong>2010-07-27</strong><br>
+                               Julia and Katarina<br>
+                               <br>
+                               A 1.5 % gel was run with all of the fragments around 700 bp to control the validity of the PCR reactions. A low range ladder was used. PCR products 1-5 seems good. The results from yesterday were confirmed. <br>
+                               <br>
+                               A new PCR design was made with α, Β, Γ and IV. PCR was done in two steps to increase the chance of success for longer fusions. <br>
+. 7 cycles with short annealing time. <br>
+. 20 cycles with long annealing time (all other settings kept standard). <br>
+                               <br></p></li>
+                                <li><p><strong>2010-07-26</strong><br>
+                               <br>
+                               A new experiment were designed called Γ which is the same as I but with longer annealing region. Also an experiment called Δ were designed which corresponds to II. <br>
+                               <br>
+                               Julia and Katarina<br>
+                               <br>
+                               PCR reactions were run with samples of 4, IV and Γ. IV was tried with two different PCR settings: one regular and one with two runs of PCR, the first without primers and only 5 cycles and the second one with regular settings. <br>
+                               <br>
+                               Kemal and Lokesh<br>
+                               <br>
+                               The PCR products were controlled on a 0.7% agarose gel. Only 4 worked. Γ was empty and IV had bands in the wrong place (amplified template). <br>
+                               <strong>4: </strong>534 ng/ µl </p></li>
+                                 <li><p>  <strong>2010-07-22</strong><br>
+                                       Karl, Lokesh and Kemal
+                                       </br></br>
+                                       A new mastermix was prepared using a different enzyme. Then the   experiments from yesterday was redone using regular PCR settings: <br>
+                                       A, 5, 2, I<br>
+                                       Then some more experiments of IV was redone: <br>
+a, 2b and 2c<br>
+                                       The new primer 14 had arrived so PCR reaction 4 was also redone. <br>
+                                       <br>
+                                       All the PCR products were run on a 0.7 % agarose gel with GeneRuler 1 kb   DNA ladder. The results were inconclusive. None of the expected bands   were received.  At this point we are not sure what to do since none of   the PCR reactions worked. <br>
+                                       <br>
+                                      </p>
+                                 </li>
+                                <li> <p> <strong>2010-07-21</strong><br>
+                                  Malin, Julia, Karl and Lokesh<br>
+                                  <br>
+                                  <strong>Verification of the PCR products </strong>α1, α2, α3, α4, α5 and αK by running on a thin 0.7 % agarose gel (8 µl sample+ 2 µl loading buffer, GeneRuler 1 kb DNA ladder). <br>
+                                  <br>
+                                  The gel didn’t show the expected band lengths. A band around 700 bp   could be seen, most strongly for α4 and α5.  We suspect that there is   something wrong with the ladder because we get inconclusive results.   Since none of the PCR reactions for the last couple of days have worked   we will redo the templates of α and IV: I, 2, 5 and A. These PCR   reactions have worked before. <br>
+                                  <br>
+                                  <strong>Expected fragment length: </strong><br>
+                                  A.2: 1938 bp<br>
+.2: 757 bp<br>
+.2: 762 bp<br>
+                                  I.2: 768 bp<br>
+                                  <br>
+                                  The PCR products were run on a thin 0.7 % agarose gel. We used both the   FastRuler High Range Ladder and the GeneRuler 1 kb DNA ladder. 5.2 and   2.2 showed the expected bands around 750 bp. I.2 and A.2 did not work at   all, nothing visible on the gel.  We also run some of the old PCR   products to see what the result would be using a new ladder. We run α2,   α5, 4c (IV) and 4c*(IV). Here some template amplifications were visible   but sadly none of the expected fragment lengths. Both ladders showed the   same result so there is probably nothing wrong with the GeneRuler   ladder except that it is not showing strong color. <br></p></li>
+                                  <li><p><strong>2010-07-20</strong><br>
+                                  Malin, Julia, Lokesh and Karl<br>
+                                  <br>
+                                  <strong>Verification of yesterdays PCR reactions </strong>by running on a 0.7 % agarose gel (8 µl sample+ 2 µl loading buffer, GeneRuler 1 kb DNA ladder) <br>
+                                  <br>
+                                  None of the reactions worked. <br>
+                                  <br>
+                                  Gel 1 (Block A): Nothing visible on gel, ladders only very light so   these samples were run on a new 0.7 % agarose gel but this time thinner   to get better resulotion (0.58 g agarose + 80 ml TBE). This time no   expected fragments were seen, but bands corresponding to primer dimers   were clearly seen. <br>
+                                  Gel 2 (Block B): A few small bands were seen but no bands of expected length. <br>
+                                  <br>
+                                  We decided to stop working on IV until proper feedback on the experimental setup was received. Instead we continued with α.<br>
+                                  <br>
+                                  <strong>Doing another PCR round of α (SAMS peptide): </strong> <br>
+                                  <strong>α: PCR fusion of cfp-SAMS and yfp: </strong>Adds BamHI on N-terminus of cfp and HindIII on C-terminus of yfp and keeps the stop codons. Expected fragment length: 1502 bp. <br>
+                                  <br>
+                                  α1: regular protocol. <br>
+                                  α2: regular protocol. <br>
+                                  α3: 1.25 µl extra primer 9.<br>
+                                  α4: 1.25 µl extra primer 12. <br>
+                                  α5: 1.25 µl extra primer 9 and 1.25 µl primer 12. <br>
+                                  αK: Control<br>
+                                  Regular PCR-settings</p></li>
+                                 <li><p> <strong>2010-07-19</strong><br>
+                                  Karl, Peidi and Kemal<br>
+                                  <br>
+                                  <strong>Doing a new experimental setup for IV: </strong><br>
+                                  <strong>IV. PCR fusion of cfp and Snf1: </strong>Adds SpeI on N-terminus of cfp and PacI on C-terminus of Snf1 and keeps the stop codon. Expected fragment length: 2643 bp. <br>
+                                  <br>
+different tubes were prepared and run at two different PCR-settings.   Block A: Regular settings except double annealing time (1 min). Block B:    Regular settings except 58° C annealing temperature. <br>
+                                  <br>
+                                  C : Control<br>
+a: same as 2* (template 5 5 x diluted) <br>
+b. same as 3* (template 5 10 x diluted) <br>
+c: same as 4* (template 5 100x diluted) <br>
+a: increased product A concentration to 5 ng/µl. <br>
+b: increased product A concentration to 10 ng/µl. <br>
+a: same as 5* (2x primer 7) <br>
+b: same as 6* (template 5 diluted 5x, 2x primer 7) <br>
+c: same as 7* (template 5 diluted 10x, 2x primer 7) <br>
+d same as 8* (template 5 diluted 100x, 2x primer 7) <br>
+a: 2x primer 7. <br>
+b: 2x primer 7, 5x template A. <br>
+c: 2x primer 7, 10 x template A. <br></p></li>
+                                 <li><p> <strong>2010-07-16</strong><br>
+                                  Lokesh, Kemal, Katarina and Peidi<br>
+                                  <br>
+                                  <strong>Verification of PCR </strong>reactions IV* (8 tubes) and α on a 0.7 % agarose gel (5 µl sample+ 2µl loading buffer, GeneRuler 1 kb DNA ladder). <br>
+                                  <br>
+                                  No bands visible. None of the PCR reactions worked, just small bands   visible corresponding to primers. The α PCR reaction messed the tubes   up. That might be an explanation why there were no bands on the gel for   α.  A new experimental setup must be made tomorrow. <br>
+                                  <br>
+                                  PCR products I and 2 were run with a low range ladder to see that those products are ok. That gel was satisfactory. <br>
+                                  <br></p>
+                               <li><p><strong>2010-07-15</strong><br>
+                                  Malin, Julia, Kemal and Karl<br>
+                                  <br>
+                                  <strong>Concentrations of PCR products: </strong><br>
+.2. 356.2 ng/µl<br>
+                                  I. 338.3 ng/µl<br>
+                                  II. 303.6 ng/µl<br>
+                                  III. 337.5 ng/µl<br>
+                                  IV. 280.9 ng/µl<br>
+                                  <br>
+                                  All PCR-products were diluted to 1 ng/µl. <br>
+                                  <br>
+                                  <strong>Verified PCR products</strong> I-IV and 4.2 on a 0.7 % Agarose Gel (8 µl sample + 2µl loading buffer, GeneRuler 1 kb DNA ladder) <br>
+                                  PCR products I, II and III were good but 4.2 showed no bands at all.   After primer design control we found a problem with primer 14, which   then was ordered again. IV had only a band around 700 bp instead of   2600.  This might be template 5, which then has been amplified. If the   settings are changed maybe it will work. Firstly the template 5 will be   diluted 0x, 5x, 10x and 100x (4 tubes: 1*, 2*, 3* and 4*) and these   dilutions will also be run with higher primer concentration 7 (4 tubes:   5*, 6*, 7* and 8*).  2.5 µl primer 7 will be added instead of 1.25 µl   primer 7. <br>
+                                  <br>
+                                  New PCR reactions were run: <br>
+                                  <strong>α: PCR fusion of cfp-SAMS and yfp: </strong> Adds BamHI on N-terminus of cfp and HindIII on C-terminus of yfp and keeps the stop codons. Expected fragment length: 1502 bp. <br>
+                                  K4. Control. <br>
+                                  <br>
+                                  <strong>IV *: PCR fusion of cfp and Snf1: </strong>Adds SpeI on N-terminus of cfp and PacI on C-terminus of Snf1 and keeps the stop codon. Expected fragment length: 2643 bp. <br>
+                                  Half volume 25 µl. Regular PCR settings except 56 °C annealing temperature. <br>
+*;- 8*<br>
+                                  K1*. Control for 1-4*.<br>
+                                  K2*. Control for 5-8*.<br>
+                                  <br></p></li>
+                                 <li> <p><strong>2010-07-14</strong><br>
+                                  Julia and Katarina <br>
+                                  <strong>Ran PCR 1-5.</strong><br>
+. Amplification of cfp-sams compatible: Add restriction enzyme site BamHI on N-terminus +SAMS on C-terminus.<br>
+                                  Expected fragment length: 748 bp.<br>
+. Amplification of yfp-SAMS competible: Adds restriction enzyme site for HindIII on C-terminus and SAMS tail on N-terminus. <br>
+                                  Expected fragment length: 762 bp.<br>
+. Amplification of yfp-snf4 compatible: Adds restriction enzyme site BamHI on N-terminus and Snf4 tail on C-terminus. <br>
+                                  Expected fragment length: 755 bp.<br>
+. Amplification of cfp-Snf4 compatible: Adds restriction enzyme site HindIII on C-terminus and Snf4 tail on N-terminus. <br>
+                                  Expected fragment length: 769 bp.<br>
+. Amplification of cfp-snf1 compatible: Adds restriction enzyme site SpeI on N-terminus and Snf1 tail on C-terminus.<br>
+                                  Expected fragment length: 757 bp.<br>
+                                  K2. Control K2.<br>
+                                  <br>
+                                  Julia, Katarina and Malin<br>
+                                  <strong>Verified PCR 1-5:</strong> measured concentration by nanodrop   and checked if the fragments were the correct length by running on a 2 %   agarose gel (8 µl sample+2 µl loading buffer, Fermentas FastRuler Low   Range).<br>
+                                  PCR product 1, 2, 3 and 5 worked and gave expected fragment lengths.   Number 4 however did not work.  Only a fragment around 80 bp was   visible, probably a primer dimer.<br>
+                                  <br>
+                                  <strong>Concentrations:</strong><br>
+. 443.9 ng/µl<br>
+. 371.0 ng/µl<br>
+. 361.7 ng/µl<br>
+. --<br>
+. 377.6 ng/µl<br>
+                                  A. 451.1 ng/µl (snf1)<br>
+                                  B. 438.7 ng/µl (snf4)<br>
+                                  C. 408.9 ng/µl (SAMS) <br>
+-5 and A-C were diluted to 1 ng/µl.<br>
+                                  <br>
+                                  <strong>Ran PCR of I, II, III, IV and 4.</strong><br>
+.2.  Amplification of cfp-Snf4 compatible: Adds restriction enzyme site   HindIII on C-terminus and Snf4 tail on N-terminus. Expected fragment   length: 769 bp. (second try)<br>
+                                  I. PCR fusion of cfp and SAMS: Adds BamHI on N-terminus of cfp and gives a SAMS C-terminus. Expected fragment length: 768 bp.<br>
+                                  II. PCR fusion of yfp and Snf4 1: Adds BamHI on N-terminus of yfp and removes stop codon. Expected fragment length: 1694 bp.<br>
+                                  III. PCR fusion of yfp and Snf4 2: Adds BamHI on N-terminus of yfp and   adds HindIII on C-terminus of Snf4 plus adds stop codon. Expected   fragment length: 1708 bp. Final Product!<br>
+                                  IV. PCR fusion of cfp and Snf1: Adds SpeI on N-terminus of cfp and PacI   on C-terminus of Snf1 and keeps the stop codon. Expected fragment   length: 2643 bp.<br>
+                                  K3. Control<br>
+                                  <br>
+                                  Karl and Malin<br>
+                                  Transferred diploid cells of snf1Δ mutants to two sporulation plates and incubated in 30° C. (For 2-7 days)<br>
+                                </p></li>
+                                <li><p><strong>2010-07-13</strong><br>
+                                  Julia and  Lokesh<br>
+                                  Ran the gel  with products of our first three PCRs along with the   templates we made for the  two fluorescent proteins. We also prepared   the sample solutions of DNA  templates with appropriate concentration   (1ng/µl) for the next PCR reactions.<br>
+                                  <strong>Verified</strong> the PCR products and the digested miniprepped    EYFP and ECFP by running an agarose gel which showed good results.   Expected  fragment lengths were received. The SAMS-peptide however was   too short to be  visible on the gel (67 bp).<br>
+                                  <strong>Prepared for PCR 1-5. </strong>The miniprepped ECFP and EYFP   were  diluted to a stock concentration of 1 ng/ ml to use for the PCR.    The concentrations of the first PCR product  were measured using   nanodrop and then diluted to 1 ng/ml.<br>
+                                  snf1: 20.5 ng/ml<br>
+                                  snf4: 122.6 ng/ml<br>
+                                  SAMS: 114.9 ng/ml<br>
+                                </p>
+                                 <p> Karl and  Adnan<br>
+                                  We made  duplicates of the haploid Snf4∆ and wildtype strains on new   plates in case the  original plate would be contaminated. Prepared a   sporulation medium that was  autoclaved and poured into empty growth   plates to stay in room temperature over  night.</p>
+                                  <br></li>
+         <li>  <p> <strong>2010-07-12</strong><br>
+                                   Katarina  and Julia<br>
+                                    <strong>Amplification of genomic SNF1 DNA by PCR. </strong>All   primers were resuspended in  mq-water according to the volume on the   lable, the final concentration 100 pg/ml. The primers were then diluted   10x  and the SAMS-peptide templates were diluted 1000x. PCR reactions   were run  amplifying subunits Snf1 and Snf4 and also the SAMS-peptide.   YPD medium and  agar plates were prepared (yeast).<br>
+                                  </p>
+                                  <p> Adnan and  Kemal<br>
+                                 <strong>Miniprep purification </strong>of EYFP and ECFP plasmides from  overnight culture. The concentrations were measured using Nanodrop:<br>
+                                  ECFP1: 99 ng/ml<br>
+                                  ECFP2: 89.9<br>
+                                  EYFP1: 104, 7 <br>
+                                  EYFP2: 172,5<br>
+                                  The  concentrations were verified with   electrophoresis. The plasmids were cut with  restriction enzymes EcoRI   and Pst1.<br>
+                                  ECFP, plasmid pSB1AK3, fragment sizes 750 bp and 3200 bp.<br>
+                                  EYFP, plasmid pSB1A2, fragment sizes 750 bp and 2050 bp.</p></li>
+                                 <br>
+                                 <li><p><strong>2010-07-11</strong><br>
+                                    Katarina<br>
+                                    Made  overnight cultures with colony 3   and 4 plasmid (not single cultures) and twp  each of EYFP and ECFP.
+                                    </p>
+                                 </li>
+                                 <br>
+                                 <li><p><strong>2010-07-10</strong><br>
+                                    Julia<br>
+                                    Moved  plated bacteria from incubator to refrigerator. <br>
+                                   </p>
+                                 </li>
+                                 <li>
+                                     <p><strong>2010-07-09</strong><br>
+                                       Malin and  Julia<br>
+                                       The SOC  medium was autoclaved.   Competent E.coli cells were transformed with our FPs  through heat shock   and plated on petri dishes. 20 new LB-amp plates were made.<br>
+                                       Adnan and  Katarina<br>
+                                       Picked up  primers at Chalmers and   checked if they were ok. The concentration of the  genomic DNA (SNF1   gene) were measured. Prepared a master mix so that the  PCR-reactions   could be started Monday morning.</p>
+                                   <br>
+                                 </li>
+                                 <li>
+                                   <p><strong>2010-07-08</strong><br>
+                                     Malin,  Julia and Peidi<br>
+                                     The two  BioBricks EYFP and ECFP were   extracted from the kit plates and stored in the  freezer. A SOC-medium   was prepared.<br>
+                                   </p>
+                                 </li>
+                                 <li>
+                                   <p><strong>2010-07-07 </strong><br>
+                                     Adnan,  Katarina and Julia<br>
+                                     As the gels  from Tuesday showed   ambigous results we decided to redo the miniprep of the  plamids. We   used the overnight preparations of the two unused colonies (3 &amp;  4).   The miniprep went smoothly except for major difficulties regarding    untrustworthy pipettes. The pipettes marked with green tape are the ones   to use  from now on together with the tips with the same markings! A   gel was molded and  this time we decided to use a full gel to get a   better resolution.  The results on the gel were very good.  The plasmids   had clearly been cut in one or  two places and the fragment sizes seem   to correspond to the expected sizes.<br>
+                                   </p>
+                                 </li>
+                                 <li>
+                                   <p><strong>2010-07-06</strong><br>
+                                     Malin, Adnan and Peidi<br>
+                                     Colony 1 and 2 were picked to do a   miniprep.  The plasmids were extracted and a plasmid integrity check was   performed. By  cutting with BamHI, one cut were made to get the size of   the plasmid. Then we  cut with ClaI which is a two-cutter that gives a   fragment that is 600 bp and  one that is 6800. The gel which should   confirm this was not satisfactory since  the 600 band was missing.<br>
+                                   </p>
+                                 </li>
+                                 <li>
+                                   <p><strong>2010-07-05</strong><br>
+                                     Malin and Katarina<br>
+                                     An overnight culture were made from 4   different  colonies of E.coli containing the plasmid pSB-GM1.</p>
+                                 </li>
+                             </ul>
+      </div> </div>
+			<div id="right">
+                <div class="Title3">Lab Notes</div>
+                                      <div id="lab">
+                                         <div class="numleft">
+                                           <p>11</p>
+                                        </div>
+                                          <div class="newsright"><a href="#">August 11, 2010</a>
+                                           <p> The PCR reaction from yesterday was checked on a gel. α should be ... </p>
+                                          </div>
+                                          <div class="read"><a href="#">read more</a></div>
+                                          <div style="clear: both"></div>
+   	  </div>
+	   <div class="Title3">News</div>
+                               <div id="news">
+                                    <p>Göteborgs-Posten, a major daily newspaper in Sweden with the second largest national circulation, published an article involving the interview with our team...
+                                    <br></p>
+									 <div class="read"><a href="#">read more</a></div>
+                                          <div style="clear: both"></div>
+              </div>
+	</div>
+  <div id="myfooter">  <p>   <a href="#">Home</a> | <a href="#">CTH</a> | <a href="#">Sponsors</a> | <a href="#">About Us</a> | <a href="#">Contact Us</a></p> <p>Chalmers University of Technology, Gothenburg, SWEDEN</p>
+              </div>
+</div></div>
+</body>
 </html>