Team:TU Delft/Project

From 2010.igem.org

(Difference between revisions)
(Sub projects)
 
(72 intermediate revisions not shown)
Line 1: Line 1:
{{Team:TU_Delft/frame_check}}
{{Team:TU_Delft/frame_check}}
__NOTOC__
__NOTOC__
-
==Project==
+
==Project Abstract==
 +
[[Image:TUDelft_Group.png|center]]
 +
===Alkanivore: Enabling hydrocarbon degradation in aqueous environments===
-
*[[Team:TU_Delft/Project/abstract|Abstract]]
+
Pollution of soil and water environments by crude oil has been, and is still today, an important environmental issue. This was once more confirmed with the oil-spill in the Gulf of Mexico, but is also an issue that has to be faced continuously during the process of oil extraction from oil sands. Cleaning has proven to be challenging, but synthetic biology may hold the key to sustainable bio-remedial solutions for the future. What if we could design a small, autonomous, self-replicating, inexpensive method to remove oil from aqueous environments? The TU Delft iGEM 2010 team spent their summer designing a system that can tolerate, sense, dissolve & degrade hydrocarbons in aqueous environments, which could open new doors for the oil-industry.
-
*[[Team:TU_Delft/Project/introduction|Introduction]]
+
-
*[[Team:TU_Delft/Project/alkane-degradation|Alkane Degradation]]
+
-
*[[Team:TU_Delft/Project/tolerance|Salt & Solvent Tolerance]]
+
-
*[[Team:TU_Delft/Project/solubility|Solubility]]
+
-
*[[Team:TU_Delft/Project/rbs-characterization|RBS Characterization]]
+
-
*[[Team:TU_Delft/Project/conclusions|Conclusions]]
+
-
*[[Team:TU_Delft/Project/references|References]]
+
-
==Project Description==
+
Read our full [[Team:TU_Delft/Project/introduction|introduction]]
-
This year's TU Delft team will be working on the biological conversion of hydrocarbons in aqueous environments, e.g. biological degradation of oil particulates in oil sands tailing waters. The project addresses one of the more considerable challenges in this branch of industry. Addressing the issue through a biological means will require an interdisciplinary approach. The broad range of scientific fields to which we have been exposed throughout our studies will provide the knowledge and experience to formulate an efficient solution for this issue. Besides competing in iGEM, the team also wants to contribute to future research into oil utilization and create new possibilities for sustainable developments in the fossil fuel industry.
+
==Sub projects==
 +
The basis of the 2010 TU Delft iGEM team's project is the generation of a biological chassis for the conversion of hydrocarbons. The conversion system will be implemented and characterized using the well-studied cellular environment of ''Escherichia coli'', the workhorse for genetic and metabolic engineering. To tackle the important aspects faced when using biological systems for oil utilization, we are focusing on the following features:
-
The members of the TU Delft team carry a broad range of multidisciplinary assets, but it should be noted that there is a large focus on wet lab work, due to the large number of students from Life Science and Technology. This study is collaboration of two top universities in the Netherlands, the Leiden University (molecular genetics and medicine) and the Technical University of Delft ((bio-)chemical and process engineering), combining fundamental research and applied sciences.
+
<html><div style="float:right"><a href="https://2010.igem.org/Team:TU_Delft/Project/alkane-degradation"><img src="https://static.igem.org/mediawiki/2010/2/21/TU_Delft_degradation_icon.jpg" align="right" vspace="5" hspace="5" border="0" /></div></a>
-
The basis of the 2010 TU Delft iGEM team's project is the generation of a biological chassis for the conversion of hydrocarbons. The conversion system will be implemented and characterized using the well-studied cellular environment of Escherichia coli, the workhorse for genetic and metabolic engineering. To tackle the important aspects faced when using biological systems for oil utilization, we are focusing on the following features:
+
<div style="border: 1px solid #e2b7b6; padding: 5px;">
-
===Conversion of hydrocarbons===
+
<h3><a href="https://2010.igem.org/Team:TU_Delft/Project/alkane-degradation" style="color: #9f0f0e;">
-
The aerobic alkane conversion pathways of medium and long chain (<C36) alkanes from Gordonia sp. TF6 and Geobacillus thermodenitrificans will be the basis of our parts. These pathways will be implemented using the BioBrick principle and characterized in detail with respect to single enzyme activities and affinity. Using these measurements the efficiency of different enzymes can easily be compared.
+
Alkane degradation
 +
</a></h3>
-
===Hydrocarbon tolerance===
+
</html>
-
Hydrocarbons are known to damage the cell membrane and some essential cell proteins. It was found that organisms which are naturally hydrocarbon tolerant produce chaperons and other proteins, which maintain the cellular activity. We will implement this type of hydrocarbon by generating the respective BioBricks.
+
The aerobic alkane conversion pathways for various lengths of alkanes from ''Gordonia sp. TF6'' and ''Geobacillus thermodenitrificans'' were the basis for the [[Team:TU_Delft/Project/alkane-degradation/parts|alkane degradation parts]]. These pathways were implemented in ''E.coli'' using the BioBrick principle and [[Team:TU_Delft/Project/alkane-degradation/characterization|characterized]] in detail with respect to single enzyme activities and affinity. Using these measurements the efficiency of different enzymes can easily be compared.
 +
We succesfully characterized the alkane hydroxylase system (octane conversion), which had a 30-fold increase in enzymatic activity compared to the negative control. Furthermore, the enzyme activity of ''E.coli'' lysates was found to be at least 6-fold higher on hexadecane when the long-chain alkane monooxygenase (ladA) protein was expressed. The characterization showed that the implemented alcohol dehydrogenase (ADH, for the conversion of long chain alkanols to alkanals) converted dodecanol 43% better than the standard ''E.coli''. On the other hand, the expression of our ALDH system increased the dodecanal dehydrogenase activity in ''E.coli'' cell extracts by 2-fold, which was around 34% of the total aldehyde dehydrogenase activity for our positive control ''Pseudomonas putida'' a natural alkane-degrading bacterium.
-
===Hydrocarbon solubility===
+
The degradation pathways were also included in a [[Team:TU_Delft/Modeling/MFA/explanation|Metabolic Flux Analysis]] together with possible valuable products. More information on this can be found on the [[Team:TU_Delft/Modeling/MFA|in silico MFA page]] 
-
An engineering challenge faced in oil bio-conversions is the low solubility of hydrophobic molecules in water. In order to overcome this mass‐transfer limitation we will clone two genes encoding for proteins with emulsifying properties. It is expected that these proteins will increase the solubility of hydrocarbons, which can be then converted more efficiently into potentially valuable products. Additionally, these emulsifiers are promising reagents for oil extraction from sands making the process cheaper and more sustainable.
+
-
===Halotolerance===
+
Read more about [[Team:TU_Delft/Project/alkane-degradation|Alkane Degradation]]
-
High salt concentrations, as can be found in tailing waters and other aqueous environments contaminated with oil, are toxic to many microorganisms. Our aim is to create a BioBrick which will facilitate cell growth at increased salt concentrations.
+
<html>
-
===Genetic regulation===
+
</div>
-
In order to have efficient cell growth, it is important to develop a system that activates gene expression at the optimal moment in time. An alkane sensing mechanism will be coupled to the 'in-house' catabolic repression system (crp) generating energy efficient cell growth under glucose conditions as well as produce enzymes for hydrocarbon degradation when needed.
+
-
===Genome‐scale modeling===
+
<br style="clear:both;" /></html>
-
Modeling approaches are used to explore the possibilities of valuable product formation from hydrocarbons. The model will be based on the MetaCyc pathway database, which contains pathway information of many sequenced organisms, covering a broad range of products such as biofuels, bioplastics and other fine chemicals.
+
 +
<html><div style="float:right"><a href="https://2010.igem.org/Team:TU_Delft/Project/sensing"><img src="https://static.igem.org/mediawiki/2010/b/bd/TU_Delft_Sensing_icon.jpg" align="right" vspace="5" hspace="5" border="0" /></a></div>
 +
<div style="border: 1px solid #d2e6bf; padding: 5px;">
-
The tasks of the team are roughly be divided into two groups. One group will deal mainly with the aspects related to the modeling and design of the synthetic system. A second group of students will mainly carry out the wet lab work.
+
<h3><a href="https://2010.igem.org/Team:TU_Delft/Project/sensing" style="color: #6aab2c;">
 +
Sensing
 +
</a></h3></html>
 +
In order to have efficient cell growth, it is important to develop a system that activates gene expression at the optimal moment in time. [[Team:TU_Delft/Project/sensing/parts|Parts]] were designed based on an alkane sensing mechanism from ''Pseudomonas putida'', in which a number of different promoters are activated by the presence of alkanes or the absence of glucose. [[Team:TU_Delft/Project/sensing/characterization|Characterization]] of one of these promoters resulted in [[Team:TU_Delft/Project/sensing/results|production of GFP at low glucose concentrations]]. This new promoter combined with B0032 has a GFP production rate of 3.975E07 GFP molecules/second/O.D. in the stationary phase (glucose starvation). We also found that the same part [http://partsregistry.org/Part:BBa_K398326 pCaiF] is nicely tuned by intracellular cAMP levels. Furthermore this system was also modeled, more information can be found on the [[Team:TU_Delft/Modeling/HC_regulation|in silico sensing page]]
-
Also the ethical and safety issues posed by synthetic biology will be considered. The synthesis of a DNA strand representing a set of genes arbitrarily chosen by the designer, and its insertion in a living cell will, in general, provide the host cell, with new emerging properties that were not present in the original organisms. This poses several challenges in terms of safety and ethics that need to be addressed within the project.
+
Read more about [[Team:TU_Delft/Project/sensing|Sensing]].
-
We also presented our project in more detail for a number of faculty members, you can find this presentation here.
+
 
 +
<html></div><br style="clear:both;" /></html>
 +
<html><div style="float:right"><a href="https://2010.igem.org/Team:TU_Delft/Project/tolerance"><img src="https://static.igem.org/mediawiki/2010/5/59/TU_Delft_Tolerance_icon.jpg" align="right" vspace="5" hspace="5" border="0" /></div></a>
 +
 
 +
<div style="border: 1px solid #b2c0d9; padding: 5px;">
 +
 
 +
<h3><a href="https://2010.igem.org/Team:TU_Delft/Project/tolerance" style="color: #002f82;">
 +
Survival
 +
</a></h3></html>
 +
In order to be able to use our alkane degrading biological system in the intended environments some though must go into the survivability of the system. These environments include those with high levels of hydrocarbons as well as high salt levels, aspects which would cause an inhabitable environment for our system. It was found that organisms which are naturally hydrocarbon tolerant and salt tolerant produce chaperons and other proteins, which maintain the cellular activity - these genes were the basis of the [[Team:TU_Delft/Project/tolerance/parts| survival parts]]. [[Team:TU_Delft/Project/tolerance/characterization| Characterization]] of these parts showed an increased survivability for both salt and hydrocarbon environments of up to [[Team:TU_Delft/Project/tolerance/results|33% and 50%]] respectively.
 +
 
 +
Read more about [[Team:TU_Delft/Project/tolerance|Salt & Alkane Tolerance]].
 +
<html></div><br style="clear:both;" /></html>
 +
 
 +
<html><div style="float:right"><a href="https://2010.igem.org/Team:TU_Delft/Project/solubility"><img src="https://static.igem.org/mediawiki/2010/9/98/TU_Delft_Solubility_icon.jpg" align="right" vspace="5" hspace="5" border="0" /></div></a>
 +
 
 +
<div style="border: 1px solid #e0b2dd; padding: 5px;">
 +
 
 +
<h3><a href="https://2010.igem.org/Team:TU_Delft/Project/solubility" style="color: #990090;">
 +
Solubility
 +
</a></h3></html>
 +
An engineering challenge faced in oil bio-conversions is the low solubility of hydrophobic molecules in water. To overcome this mass‐transfer limitation, a gene encoding for AlnA, a protein with emulsifying properties, was the basis of our [[Team:TU_Delft/Project/solubility/parts|solubility BioBrick]]. Currently described protocols deemed insufficient to determine the solubility, thus a new protocol was created to [[Team:TU_Delft/Project/solubility/characterization|characterize]] this part, which showed an [[Team:TU_Delft/Project/solubility/results|increased solubility of about 20%]].
 +
 
 +
Read more about [[Team:TU_Delft/Project/solubility|Solubility]].
 +
<html><br /><br /></div><br style="clear:both;" /></html>
 +
 
 +
<html><div style="float:right"><a href="https://2010.igem.org/Team:TU_Delft/Project/rbs-characterization"><img src="https://static.igem.org/mediawiki/2010/0/06/TU_Delft_RBS_characterization_icon.jpg" align="right" vspace="5" hspace="5" border="0" /></div></a>
 +
 
 +
<div style="border: 1px solid #ffdda8; padding: 5px;">
 +
 
 +
<h3><a href="https://2010.igem.org/Team:TU_Delft/Project/rbs-characterization" style="color: #995e00;">
 +
RBS Characterization
 +
</a></h3></html>
 +
In order to be able to tune our protein production, and for the benefit of the iGEM community, the Anderson RBS family was characterized. The [[Team:TU_Delft/Project/rbs-characterization/parts|parts]] were build up out of a standard promoter, the to be characterized RBS and GFP as a a signal molecule. By [[Team:TU_Delft/Project/rbs-characterization/characterization|measuring]] the GFP production in the exponential phase the [[Team:TU_Delft/Project/rbs-characterization/results|individual strengths of the different RBS's]] were determined
 +
 
 +
Read more about [[Team:TU_Delft/Project/rbs-characterization|RBS Characterization]].
 +
<html><br /><br /><br /></div><br style="clear:both;" /></html>

Latest revision as of 00:35, 28 October 2010

Project Abstract

TUDelft Group.png

Alkanivore: Enabling hydrocarbon degradation in aqueous environments

Pollution of soil and water environments by crude oil has been, and is still today, an important environmental issue. This was once more confirmed with the oil-spill in the Gulf of Mexico, but is also an issue that has to be faced continuously during the process of oil extraction from oil sands. Cleaning has proven to be challenging, but synthetic biology may hold the key to sustainable bio-remedial solutions for the future. What if we could design a small, autonomous, self-replicating, inexpensive method to remove oil from aqueous environments? The TU Delft iGEM 2010 team spent their summer designing a system that can tolerate, sense, dissolve & degrade hydrocarbons in aqueous environments, which could open new doors for the oil-industry.

Read our full introduction

Sub projects

The basis of the 2010 TU Delft iGEM team's project is the generation of a biological chassis for the conversion of hydrocarbons. The conversion system will be implemented and characterized using the well-studied cellular environment of Escherichia coli, the workhorse for genetic and metabolic engineering. To tackle the important aspects faced when using biological systems for oil utilization, we are focusing on the following features:

Alkane degradation

The aerobic alkane conversion pathways for various lengths of alkanes from Gordonia sp. TF6 and Geobacillus thermodenitrificans were the basis for the alkane degradation parts. These pathways were implemented in E.coli using the BioBrick principle and characterized in detail with respect to single enzyme activities and affinity. Using these measurements the efficiency of different enzymes can easily be compared. We succesfully characterized the alkane hydroxylase system (octane conversion), which had a 30-fold increase in enzymatic activity compared to the negative control. Furthermore, the enzyme activity of E.coli lysates was found to be at least 6-fold higher on hexadecane when the long-chain alkane monooxygenase (ladA) protein was expressed. The characterization showed that the implemented alcohol dehydrogenase (ADH, for the conversion of long chain alkanols to alkanals) converted dodecanol 43% better than the standard E.coli. On the other hand, the expression of our ALDH system increased the dodecanal dehydrogenase activity in E.coli cell extracts by 2-fold, which was around 34% of the total aldehyde dehydrogenase activity for our positive control Pseudomonas putida a natural alkane-degrading bacterium.

The degradation pathways were also included in a Metabolic Flux Analysis together with possible valuable products. More information on this can be found on the in silico MFA page

Read more about Alkane Degradation


Sensing

In order to have efficient cell growth, it is important to develop a system that activates gene expression at the optimal moment in time. Parts were designed based on an alkane sensing mechanism from Pseudomonas putida, in which a number of different promoters are activated by the presence of alkanes or the absence of glucose. Characterization of one of these promoters resulted in production of GFP at low glucose concentrations. This new promoter combined with B0032 has a GFP production rate of 3.975E07 GFP molecules/second/O.D. in the stationary phase (glucose starvation). We also found that the same part pCaiF is nicely tuned by intracellular cAMP levels. Furthermore this system was also modeled, more information can be found on the in silico sensing page

Read more about Sensing.



Survival

In order to be able to use our alkane degrading biological system in the intended environments some though must go into the survivability of the system. These environments include those with high levels of hydrocarbons as well as high salt levels, aspects which would cause an inhabitable environment for our system. It was found that organisms which are naturally hydrocarbon tolerant and salt tolerant produce chaperons and other proteins, which maintain the cellular activity - these genes were the basis of the survival parts. Characterization of these parts showed an increased survivability for both salt and hydrocarbon environments of up to 33% and 50% respectively.

Read more about Salt & Alkane Tolerance.


Solubility

An engineering challenge faced in oil bio-conversions is the low solubility of hydrophobic molecules in water. To overcome this mass‐transfer limitation, a gene encoding for AlnA, a protein with emulsifying properties, was the basis of our solubility BioBrick. Currently described protocols deemed insufficient to determine the solubility, thus a new protocol was created to characterize this part, which showed an increased solubility of about 20%.

Read more about Solubility.


RBS Characterization

In order to be able to tune our protein production, and for the benefit of the iGEM community, the Anderson RBS family was characterized. The parts were build up out of a standard promoter, the to be characterized RBS and GFP as a a signal molecule. By measuring the GFP production in the exponential phase the individual strengths of the different RBS's were determined

Read more about RBS Characterization.