Team:TU Delft/26 July 2010 content

From 2010.igem.org

(Difference between revisions)
(Emulsification Assay)
(Emulsification Assay)
Line 43: Line 43:
|'''#'''
|'''#'''
|'''[SDS] (mM)'''
|'''[SDS] (mM)'''
-
|Serie 1
+
|'''Serie 1'''
-
|Serie 2
+
|'''Serie 2'''
-
|Serie 3
+
|'''Serie 3'''
-
|W/O Hexane
+
|'''W/O Hexane'''
|-
|-
|1
|1

Revision as of 12:25, 27 July 2010

Emulsification Assay

We have been looking for a robust protocol for the characterization of the emulsifiers for quite some time now. Somehow most literature refers to spectrophotometric assays based on turbidity after mixing. This a somewhat arbitrary method, and so far we were unable to get reproducible results. Today we decided to explore this method once more, using a lot of different conditions.

The method is based on a simple article in Biochemical and Biophysical Methods: Spectrophotometric method for quantitative determination of nonionic, ionic and zwitterionic detergents by Rajakumari et al. 2006.

Calibration graph showing a linear increase in absorbance at 660 nm for increasing concentrations of SDS (●). Under the standard detergent assay conditions, various components like 200 mM NaCl (□), 2.0 mM CaCl2 (♦), 10% glycerol (■), 100 μg microsomal membranes (open diamond), 0.2 mM Triton X-100 (▲) and 2.5 mM CHAPS (○) were added and the turbidity was measured. Error bars represent the deviation from five independent experiments and each one performed in duplicate.

The article shows the graph on the right, which we tried to reproduce. However, instead of triolein we used hexane. And the buffer used was 200 mM Tris-HCl, pH 8.

# [SDS] (mM) Absorbance 660 nm (AU)
1 10 0.598
2 8 0.425
3 6 0.830
4 4 0.432
5 2 0.379
6 0 0.001

This looked promising, so the experiment was carried out once more in triplo and with proper controls.

# [SDS] (mM) Serie 1 Serie 2 Serie 3 W/O Hexane
1 8 0.640 0.439 0.622 0.011
2 6 0.454 0.389 0.410 0.014
3 5 0.514 0.539 0.440 0.023
4 4 0.365 0.415 0.449 0.022
5 3 0.346 0.485 0.478 0.028
6 2 0.413 0.404 Sorry, dropped the sample :( 0.024
7 1 0.399 0.500 0.388 0.011
8 0 0.003 0.007 0.004 0.002