Team:Kyoto/Project

From 2010.igem.org

(Difference between revisions)
(Goal B: Characterization of λ Lysis cassette)
(Problems of Present Cell-Death Devices)
Line 9: Line 9:
In order to design a universal and applicable cell-death device, we need to reduce the restriction on promoter's activity and to characterize the strength of the cell-death function.  
In order to design a universal and applicable cell-death device, we need to reduce the restriction on promoter's activity and to characterize the strength of the cell-death function.  
-
=====1. Solution to the Restriction on Promoter's Activity=====
+
 
 +
=====1. Need for Characterization=====
 +
In fact, there is no experimental data about the present devices in the iGEM's cell-death category. Quantitative analysis of Lysis cassette is necessary. To contribute to iGEM in this category with well characterized device, we did experimentations and some modeling.
 +
 
 +
 
 +
 
 +
=====2. Solution to the Restriction on Promoter's Activity=====
In constructing a simple circuit consisting of an inducible promoter and a killer-gene, the combinations are limited by the promoter's leak, strength of killer-function and many other factors. We looked for the solution to this problem and came up with an idea of using an anti-killer gene as well with two promoters (a constitutive one and an inducible one). With this circuit, we can apply more promoters to this device by using an appropriate constitutive promoter.
In constructing a simple circuit consisting of an inducible promoter and a killer-gene, the combinations are limited by the promoter's leak, strength of killer-function and many other factors. We looked for the solution to this problem and came up with an idea of using an anti-killer gene as well with two promoters (a constitutive one and an inducible one). With this circuit, we can apply more promoters to this device by using an appropriate constitutive promoter.
We considered that Lysis cassette of &lambda; phage and its antagonist, S<sub>&Delta;TMD1</sub> are the most appropriate to Killer-gene and Anti-killer gene. This was because some iGEM teams in the past already dealt with lysis cassette and also because we found some articles that shows the effect of S<sub>&Delta;TMD1</sub> in the yeast.
We considered that Lysis cassette of &lambda; phage and its antagonist, S<sub>&Delta;TMD1</sub> are the most appropriate to Killer-gene and Anti-killer gene. This was because some iGEM teams in the past already dealt with lysis cassette and also because we found some articles that shows the effect of S<sub>&Delta;TMD1</sub> in the yeast.
-
 
-
=====2. Need for Characterization=====
 
-
In fact, there is no experimental data about the present devices in the iGEM's cell-death category. Quantitative analysis of Lysis cassette is necessary. To contribute to iGEM in this category with well characterized device, we did experimentations and some modeling.
 
[[#top|^Top]]
[[#top|^Top]]

Revision as of 06:37, 26 October 2010

Contents

Project

Introduction

Background

The cell-death device is required in many fields. In bioremediation, for example, this device can prevent introduced bacteria from disrupting the ecosystem. Also, It can be applied to other ideas such as E.coli capsules which scatter drug or aroma by cell-lysis responding to a certain signal. Therefore, the cell death devices based on diverse approaches, including previous iGEM projects have been developed. However, present cell-death devices are still not easy to use, because of the poor characterization or strict restriction on promoters' activity and so on. Therefore, we attempt to register on BioBrick better characterized and more useful cell-death device to contribute to every future team.

Problems of Present Cell-Death Devices

In order to design a universal and applicable cell-death device, we need to reduce the restriction on promoter's activity and to characterize the strength of the cell-death function.


1. Need for Characterization

In fact, there is no experimental data about the present devices in the iGEM's cell-death category. Quantitative analysis of Lysis cassette is necessary. To contribute to iGEM in this category with well characterized device, we did experimentations and some modeling.


2. Solution to the Restriction on Promoter's Activity

In constructing a simple circuit consisting of an inducible promoter and a killer-gene, the combinations are limited by the promoter's leak, strength of killer-function and many other factors. We looked for the solution to this problem and came up with an idea of using an anti-killer gene as well with two promoters (a constitutive one and an inducible one). With this circuit, we can apply more promoters to this device by using an appropriate constitutive promoter.

We considered that Lysis cassette of λ phage and its antagonist, SΔTMD1 are the most appropriate to Killer-gene and Anti-killer gene. This was because some iGEM teams in the past already dealt with lysis cassette and also because we found some articles that shows the effect of SΔTMD1 in the yeast.

^Top

Overview

Goal A: Characterization of R0011, a strong lactose promoter

KyotoFigA001.png

We used R0011, which is one of the most commonly used parts in iGEM, to characterize our genes because the strength of promoter activity is very high. However, in previous iGEM, no teams characterized R0011 with RPU. We tried to determine what is the ratio of activity of R0011, a lactose promoter when cell lysis occurs. Therefore, in order to characterize killer and anti-killer, we have to characterize R0011.

Goal B: Characterization of λ Lysis cassette

KyotoFigC004.png KyotoFIgB001.png

To characterize λ Lysis cassette, we cultivated E.coli transformed with the device in various concentration of IPTG.Then, we measured A550 of the cultures, and determined the lytic activity of λ Lysis cassette depending on the activity of its promoter.

Goal C: Characterization of the anti-killer gene, SΔTMD1

KyotoFigC003.png

We made upper construct and measured A550 of E.coli transformed with the device in medium with IPTG and without IPTG.

Protocols

See below pages for details.

Notebook

^Top

References

  1. PMID: 20395970 Khalil AS, Collins JJ., Synthetic biology: applications come of age., Nat Rev Genet. 2010 May;11(5):367-79.
  2. PMID: 15832375 Paul D, Pandey G, Jain RK., Suicidal genetically engineered microorganisms for bioremediation: need and perspectives., Bioessays. 2005 May;27(5):563-73.
  3. PMID: 15973534 Davison J., Risk mitigation of genetically modified bacteria and plants designed for bioremediation., J Ind Microbiol Biotechnol. 2005 Dec;32(11-12):639-50. Epub 2005 Jun 23.
  4. PMID: 19897658 White R, Tran TA, Dankenbring CA, Deaton J, Young R., The N-terminal transmembrane domain of lambda S is required for holin but not antiholin function., J Bacteriol. 2010 Feb;192(3):725-33. Epub 2009 Nov 6.
  5. PMID: 7768829 Chang CY, Nam K, Young R., S gene expression and the timing of lysis by bacteriophage lambda., J Bacteriol. 1995 Jun;177(11):3283-94.
  6. PMID: 18713319 Berry J, Summer EJ, Struck DK, Young R., The final step in the phage infection cycle: the Rz and Rz1 lysis proteins link the inner and outer membranes., Mol Microbiol. 2008 Oct;70(2):341-51. Epub 2008 Aug 18.
  7. PMID: 11459934 Gründling A, Manson MD, Young R., Holins kill without warning., Proc Natl Acad Sci U S A. 2001 Jul 31;98(16):9348-52. Epub 2001 Jul 17.
  8. PMID: 9573208 Smith DL, Struck DK, Scholtz JM, Young R., Purification and biochemical characterization of the lambda holin., J Bacteriol. 1998 May;180(9):2531-40.
  9. PMID: 19298678 Kelly JR, Rubin AJ, Davis JH, Ajo-Franklin CM, Cumbers J, Czar MJ, de Mora K, Glieberman AL, Monie DD, Endy D., Measuring the activity of BioBrick promoters using an in vivo reference standard., J Biol Eng. 2009 Mar 20;3:4.
  10. PMID: 2147680 Garrett J, Bruno C, Young R., Lysis protein S of phage lambda functions in Saccharomyces cerevisiae., J Bacteriol. 1990 Dec;172(12):7275-7.

^Top