"
Team:KAIST-Korea/Project/Introduction
From 2010.igem.org
|
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> [[Image:Int1.jpg|Figure.1|center]] There are several methods for cancer diagnosis. One of the widely used methods is imaging test. It is divided into ''in vivo'' and ''in vitro'' method. ''In vivo'' imaging tests are X-ray, MRI, CT, PET, SPCT scan, and Ultrasound, ''in vitro'' method is biopsy. A biopsy is a procedure to remove a piece of tissue or a sample of cells from body for laboratory analysis. In addition, the diagnosis methods using bio marker such as RNA and DNA are developed. Bio marker plays a key role in risk assessment, assessing treatment response, and detecting recurrence and the investigation of multiple bio markers may also prove useful in accurate prediction and prognosis of cancers. [[Image:Int2.jpg|Figure.2~4|center]] We focused on the method with bio maker, especially proteins, which distinguish between normal and cancer cells using expression level difference. Many researchers have chosen antibody to detect these kinds of protein, and it needs special luminescence material to confirm whether antigen (expressed protein) is stacked or not. However it is too complicate and delicate process to attach luminescence substance to antibody and it takes lots of cost and time. In addition, established diagnosis method causes social problem because of gap of demand and supply. For these reasons, we have constructed another accurate and rapid cancer diagnosis system using Yeast. We made Yeast to synthesize fusion antibody and to fix it at the membrane itself and by cognizing antigen Yeast emit fluorescence. We want to establish new diagnosis method with synthetic biology. [[Image:Int3.jpg|Present Immunohistochemistry|center]] == Whole Pathway == Flash # 'Y. canD' is spread on the cancer cell. # 'Y. canD’s antibody combines with the antigen on the cancer cell. # The tyrosine kinase JAK1, LMO4 and gp130 dimer bind to the cytokine receptor integral to membrane. # JAK autophosphorylation activates transcription factors called STAT3. # The activated STAT3 dissociate from the receptor. # The activated STAT3 form dimers. # The STAT3 dimer go into nucleus and regulates GFP gene that attached to APRE elements of promoter. # 'Y.canD' expresse GFP. == Antibodies for Detecting Cancer Cells == Cancer cell has distinctive protein expression pattern. This expression pattern also varies on the cell line of cancer cell. For example CD15 and CD30 proteins are OVEREXPRESSED on Hodgkin’s disease, kind of lymphoma, and CEA is over-expressed on adenocarcinoma cell. These protein expression patterns also vary on the cell line of cancer. For example breast cancer cell has different protein expression pattern; over-expression of Estrogen receptor, Progesterone receptor and KI67 of MCF-7 cell line and over-expression of Human Epidermal Growth Factor receptor, KI67 of AU-56 or SK-BR-3 cell line. Therefore, it allows us to know not only the existence of cancer, but also the type of cell line to identify the protein expression pattern of biopsy sample. We selected '''Estrogen Receptor''' and '''HER2''' for our project to make a diagnosis the breast cancer. The reason why we selected these proteins is that they are differently over-expressed. Comparing over-expression pattern of these proteins can diagnose existence of cancer and type of cancer. == Making Biosensor – Yeast Cancer Detector == A '''biosensor''' is a device for the detection of an analyst that combines a biological component with a physicochemical detector component.[1] In order to make biosensor with genetically engineered organism, we should consider the following basic sensing process. [[Image:Int4.png|Biosensor Processing|center]] === Why Yeast? === Why we use ‘Yeast’ instead of ‘E. coli’? E. coli control is easier than Yeast control. E. coli has faster cell cycle than Yeast. Moreover, there are many E. coli templates. But, although E. coli has many profits, we choose Yeast. Why? The following table is E. coli properties.[2] [[Image:E.coli general statistics.jpg|500px|center]] According to the table, we can find easily some reasons that E. coli cannot work human pathway well. First, the periplasm’s thickness of E. coli is the very small as 10nm. In our project, we have to use human proteins. Almost human proteins are much bigger than E. coli’s proteins. (They are over 10nm*10nm*10nm.) Furthermore, in our project, STAT3 has 60nm height. Therefore, this protein cannot be in periplasm, and our pathway cannot work completely.[3] Second, the average E. coli protein has only 360 residues, 5nm diameter, and 40kD MW. As we mentioned, our project’s proteins have over 1000residues, 10nm diameter and 50kD MW. Thus, the possibility that E. coli have our pathway is very low. However, Yeast has big volume size from 3~4 µm to 40 µm. [4] And Yeast is a eukaryotic, so it is more similar to human cell than E. coli. There is no physical problem of using human protein in yeast. And has more possibility to do our pathway. Therefore, we use Yeast instead of E. coli. === Biochemical Receptors === [[Image:Int5.png|Biochemical Receptors|center]] The upper table represents classification of all biological receptors. First of all, since our genetically engineered machine has to detect on cancer cell directly, we should select cell surface receptors. Next, we should consider using fusion-antibody-receptors. We used gene combination simply (add antibody to biological receptor without original receipt part). If the receptor has conformational change property when it accepts input signal, we guess that our fusion antibody receptor cannot operate well because antibodies characteristics (antigen size, antibody size, etc.) are different. They don’t have special receipt part in a whole receptor, of course, so whole receptor is important receipt part; we cannot create fusion-antibody-receptor with this protein anyway. Therefore, we choose ‘Dimerization’ receptor. Most of these receptors have Immunoglobulin-like receptor part which can be alternated by antibodies easily. Also, since biosensors should activate gene expression, we selected gene-regulation related receptors. Finally we choose cytokine receptors and receptor tyrosine kinases. Among them, interleukin-6 alpha receptor was selected. === Fusion Antibody Receptors === '''The Fusion Antibody-Receptor''' is a protein which receptor genetically combines with a specific antibody. The following figures show what the fusion antibody-receptor is for details. [[Image:Int7.png|Fusion Antibody Receptors|center|620px]] The fusion antibody-receptor is designed by simple gene modification. We altered the cancer detectable antibody single chain instead of the cytokine receptor’s antigen acceptable part (Immunoglobulin-like parts). Light chain part of the antibody – Linker – Heavy chain part of antibody is enough. (There are some evidences to success making fusion antibody-receptor with this method in some experiments. [4]) Then in order to express the receptor on cell surface membrane of Yeast, we change the original signal peptide to Omp(Outer membrane protein) signal peptide of Yeast. Surely the receptor should satisfy our standard for biosensor. [[Image:Int8.png|Signal Peptide|center|620px]] Saccharomyces cerevisiae Signal peptide from Transmembrane 9 superfamily member 2 Protein sequence: MKRGVWLLIYCYATLTKG mRNA sequece: atgaaacgcggcgtgtggctgctgatttattgctatgcgaccctgaccaaaggc === Signal Pathway : JAK-STAT Pathway === There are many signal pathways from plasma membrane receptor to the gene regulation. Figure B is an example of these pathways, MAP kinase pathway linked with RAS pathway. In this pathway, # With existence of signal molecule, receptor kinases dimerize themselves and phosphorylate each other. # This phosphorylated receptor dimer is cognized by Grb2 and recruit SOS protein, the Guanine nucleotide Exchange Factor(GEP) # Recruited SOS protein substitute as GDP of Ras protein with GTP. # Ras protein with GTP changes its conformation and activate its own kinase activity(Ras pathway so far) # Ras kinase activate the MAP kinase kinase kinase, MAP KKK(also called as Raf protein) with phosphorylation # MAP KKK activates the MAP kinase kinase, MAP KK(also called as Mek) with phosphorylation # MAP KK activates the MAP kinase, MAP K(also called as Erk) with phosphorylation # Activated MAP Kinase phosphorylates many cytosol proteins. # For example, if Jun TF is phosphorylated by MAP K, phosphorylated Jun go inside of nucleus and activate the transcription to bind to DNA. (MAP pathway so far) But to port this signal pathway into the Yeast is not easy because this pathway is related with too many new proteins, while JAK-STAT pathway is easy to port because it doesn’t have many participating proteins. The signal transduction step of JAK-STAT pathway as follows. [[Image:pathway1.jpg|620px]] # Cytokine binds to the cytokine receptor with JAK kinase. # Kinases form dimer and are phosphorylated by JAK. # These phosphorylated tyrosine residue is cognized by STAT protein. # STAT which cognize phosphorylated tyrosine phosphorylate other STAT protein. # Two phosphorylated STAT protein form dimer and go inside to the nucleus and activate near gene to bind to the GAS motif. Because JAK-STAT pathway have only 5 steps while RAS-MAP pathway require 9 steps, we decide to port JAK-STAT pathway to the Yeast. [[Image:pathway2.jpg|620px]] Actually, there are many JAK-STAT pathways in human cell. JAK and STAT are important components of many cytokine receptor systems. According to combination of the receptor, JAK and STAT, there exits many pathways which acts different works in eukaryotic cell. Among these pathways, we choose IL-6α, JAK1, STAT3 pathway. In this pathway, gp130 dimer and LMO4 are combined with JAK1, and assists a whole response. Why we selected the IL-6α specially? That is, IL-6α is a unique receptor which has a Ig-like region at outer part as different with other cytokine receptors. The introduction of IL-6α, gp130, and LMO4 are below. [[Image:Int6.png|Interleukin Receptors|center|600px]] [[Image:gp130 LMO4.jpg|620px|center]] === Gene Activation for Output === Inside the nucleus the active STAT dimer binds to cytokine inducible promoter regions of genes containing '''gamma activated site (GAS) motif''' and activate transcription of cytokine inducible genes.[5] The STAT protein can be dephosphorylated by nuclear phosphatases which lead to inactivation of STAT and the transcription factor becomes transported out of the nucleus by exporting crm1/RanGTP. Using this pathway, we altered the '''green fluorescent protein (GFP) gene''' instead of cytokine inducible genes. So, we could show GFP expression through the previous whole pathway.'''[Fig. 5]''' [[Image:Int9.png|Figure. 5|center]] == References == :Fig 1. Female cancer incidence worldwide, MRC, National Institute for Medical Research ::http://www.nimr.mrc.ac.uk/virology/doorbar/fig1/ :Fig 2. Nature Biotechnology 22, 6 - 7 (2004) ::http://www.nature.com/nbt/journal/v22/n1/full/nbt0104-6.html :Fig 3.Bon cancer symptoms (2008) ::http://bonecancersymptoms.org/ :Fig 4. Charlotte Mulvihill, author. Licensed for use, ASM MicrobeLibrary ::http://vivo.cornell.edu/individual/vivo/individual847 :Fig 5. RCSB Protein Database “Crystal structure of the hexameric human IL-6/IL-6 alpha receptor/gp130 complex” ::http://www.rcsb.org/pdb/explore/explore.do?structureId=1P9M :Fig 7. Invitrogen “JAK STAT” ::http://www.invitrogen.com/site/us/en/home/Products-and-Services/Applications/Cell-and-Tissue-Analysis/Signaling-Pathways/Jak-STAT.html :Fig 8. Akihiko Yoshimura, Hitomi Nishinakamura, Yumiko Matsumura and Toshikatsu Hanada, Negative regulation of cytokine signaling and immune responses by SOCS proteins, Arthritis Research & Therapy(2005) :Fig 9. RCSB Protein Database “THIRD N-TERMINAL DOMAIN OF GP130” ::http://www.rcsb.org/pdb/explore/explore.do?structureId=1BJ8 :Fig 10. RCSB Protein Database “Complex of LMO4 LIM domains 1 and 2 with the ldb1 LID domain” ::http://www.rcsb.org/pdb/explore/explore.do?structureId=1RUT :Fig 11. Roberto, Proteína fluorescente verde – história e perspectivas, Química de Produtos Naturais (2009) :[1] International Union of Pure and Applied Chemistry. "biosensor". Compendium of Chemical Terminology :: Internet edition. :[2] Garrett, R.H., and Grisham, C.M. Biochemistry, 2nd Edition (2002), pg. 32 :[3] RCSB PDB(protein database), http://www.rcsb.org/ :[4] Walker K, Skelton H, Smith K. (2002). accessdate=2009-11-28 "Cutaneous lesions showing giant yeast forms of Blastomyces dermatitidis". Journal of Cutaneous Pathology 29 (10): 616–18. doi:10.1034/j.1600-0560.2002.291009.x :[5] Uniprot Database “Interleukin-6 receptor subunit alpha”; http://www.uniprot.org/uniprot/P08887 :[6] Lichtman, Andrew H.; Abbas, Abul K. Cellular and molecular immunology (5th ed.). (2003). Philadelphia Saunders. ISBN 0-7216-0008-5. :[7] SR Roffler1,6, H-E Wang2,6, H-M Yu2, W-D Chang3,4, C-M Cheng3,4, Y-L Lu5, B-M Chen1 and T-L Cheng3,4. A membrane antibody receptor for noninvasive imaging of gene expression. Gene Therapy. Nature (2005) :[8] Martine I. Darville, Ye-Shih Ho and Decio L. Eizirik, NF-B Is Required for Cytokine-Induced Manganese Superoxide Dismutase Expression in Insulin-Producing Cells, The Endocrine Society(2000) |
Sub-Menu |
