Team:Imperial College London/Chassis

From 2010.igem.org

Revision as of 10:55, 26 October 2010 by Mlr107 (Talk | contribs)

Chassis

Our choice of chassis was B. subtilis.

Icbsub.jpg

Here we list the reasons why B. subtilis serves as a more appropriate chassis option with regards to our project design and main project specifications. To re-iterate the pertinent project specifications:

  • Safe
  • Portable
  • Cheap
  • Fast
  • Easy to use

We selected B. subtilis because it is a well characterized gram positive bacterium that is non pathogenic. It was convenient but also a coincidence that within our chosen chassis were features with which we could manipulate to use in our detection module.

Below is a brief table summary of how B. subtilis meets our system requirements and also some of the issues we encountered throughout the implementation process and how we overcame them.

Bacillus subtilis Breakdown

Required Components Features of B.subtilis
    For our detection module we need:
  • A peptide display system combined with
  • A quorum sensing system activated by a linear AIP.
  • For our chassis we need it to be Portable
  • Utilizes a quorum sensing system based on using small linear peptides as autoinducers
  • LytC peptide delivery and cell wall anchoring system
  • Bacillus contains a single cell membrane which alleviates additional complexity transporting our re-engineered surface peptide between compartments
  • Spore forming under stressful conditions
  • High motility for faster detection of the parasite!

Notes:

Bacillus uniquely utilizes a quorum sensing system based on using small peptides as autoinducers. Many other bacteria including gram negative bacteria use a QSS based on circular or post-translationally modified peptide display systems; this introduced problems with our desire to re-engineer the small peptide fragment. Bacillus however presents linear peptides on its cell wall. Small autoinducing peptides of a downstream signaling system could be released by the cleavage of these membrane-anchored cell surface proteins. This involves including a protease cleavage site between the membrane anchored domain and the autoinducing peptide. Proteases released from the Circaria parasite would target this site and hence we can detect them as our system becomes activated. Protease detector peptides (small linear quorum sensing peptide attached to protease recognition sequence) may also get trapped between the cell wall and cell membrane. To avoid this we looked into mechanisms of transport and attachment of these peptides to the outside of cell wall. An alternative was secrete detector peptides into the medium as B. subtilis is very good at secreting proteins. The lytC cell wall delivery and anchoring system was chosen to satisfy our system of peptide presentation. Specifically, our protease cleavage site linker peptide plus autoinducing peptide were attached to the cell wall binding domain of an endogenous (to Bacillus) LytC surface protein.

N.B. An additional option considered was to attach the small protease detector peptides on to pili (fimbriae) that are normally presented on the bacterial cell. This has been done routinely on E.coli fimbriae at non-conserved regions and outer membrane proteins to present various antigens 1. There is also a good review of a variety of export patways that have been used 2 in gram negative bacteria. There is a lot work done on gram positive bacteria, although there is a detailed and very accessible review 3 of current understanding of G+ve cell surface.


Issues Solution
  • Extracellular proteases naturally produced and secreted by gram positive bacteria. These could interfere with the system and could result in false positives or degrade the protease detection peptide.
  • Protease deficient strains are available

Safety
Required components Features of B. subtilis
  • Our system is to be utilized in the field by non experts and to used in the environment,

So we need to ensure the bacterium is SAFE

  • Non-pathogenic

Notes:

Bacillus is a naturally occurring soil bacterium that presents no pathogenicity to humans. We aim to introduce our new DNA into existing essential genes. The disruption of these genes render the bacteria unlikely to exist outside of the lab or eventual product environment.

Design Considerations
Required components Features of B. subtilis
  • Integration of DNA into the host genome
  • Natural Competency and Integration
  • Very well characterized Gram +ve bacterium

Notes:

Luckily for us B. subtilis was the chassis of choice of the IC iGEM 2008 team. This means that there are now Bacillus friendly parts in the registry that we can use and also further characterize and contribute towards.

Required components Features of B. subtilis
  • Recognition of vectors as foreign DNA and subsequent rejection
  • Vector incompatibility with those used by E.coli
  • Chromosome integration methods, ultimately ensures our introduced DNA is more stable and retained.
IC 2010 IGEMchassis.jpg

|}

Dif excision from B. subtilis

B. subtilis dif: sequence-specific recombinase recognition site

In cells with circular chromosomes, recombinatorial repair and homologous recombination can generate multimeric chromosomes 1. Dif sites are part of a system to ensure that multimeric chromosomes can be separated to monomers, which is required for proper sharing of genetic material between daughter cells. In B. subtilis the tyrosine family recombinases such as RipX and CodV mediate the separation at 28-bp sequence Bs dif 1. The site-specific recombinases are able to recognize two directly repeated dif sites and excise the fragment flanked by the two sites 2.

Removal of a specific gene from a genome integrated construct:

DifExcision.PNG

The site-specific recombinases, endogenous to B. subtilis strains are able to recognise dif sites and recombine out the strand of DNA directly flanked by the two sites. Recombination leaves a single dif site.

The construct was previously engineered to homologously recobine into the genome of B. subtilis. Integration sequences such as amyE <bbpart>BBa_K143001</bbpart>, <bbpart>BBa_K143002</bbpart> can be used to achieve this.

Usage and Biology

Sequence and Features

<partinfo>BBa_K316002 SequenceAndFeatures</partinfo>

References

1) Sciochetti SA, Piggot PJ, and Blakely GW. Identification and characterization of the dif Site from Bacillus subtilis. J Bacteriol 2001 Feb; 183(3) 1058-68. doi:10.1128/JB.183.3.1058-1068.2001 pmid:11208805. PubMed HubMed

2) Bloor AE and Cranenburgh RM. An efficient method of selectable marker gene excision by Xer recombination for gene replacement in bacterial chromosomes. Appl Environ Microbiol 2006 Apr; 72(4) 2520-5. doi:10.1128/AEM.72.4.2520-2525.2006 pmid:16597952.


E.coli was considered as a possible option. Despite the gram negative outer membrane, there are strains that have been made more permeable through knockout of Lipid A biosynthesis in lipopolysaccharides [4] There are also proteins that can disrupt membranes when they are inserted in them, thus making them more permeable. These chages in permeability are likely due to transient ruptures of outer membrane and so unlikely to make a very responsive or robust detecton organism [4].

Surplus information on B. Subtilis chassis Subti-Wiki

1) Fimbrial surface display systems in bacteria: from vaccines to random libraries. Klemm1 & Schembri, 2000

2) Surface display of proteins by Gram-negative bacterial autotransporters. Rutherford & Mourez, 2006

3) Protein cell surface display inGram-positive bacteria: fromsingle protein tomacromolecular protein structure. Desvaux et al, 2006

4) Outer Membrane Permeability Barrier in Escherichia coli Mutants That Are Defective in the Late Acyltransferases of Lipid A Biosynthesis. Vaara1 & Nurminen, 1999

Vectors
We have submitted the AmyE vector and the PyrD vector, which will be of great use to anyone working with B. subtilis in the future.
AmyE Vector

<partinfo>BBa_K316022 short</partinfo>


AmyE locus This vector has been designed using the amyE 5' <bbpart>BBa_K143008</bbpart> and 3' <bbpart>BBa_K143009</bbpart> integration sequences for integration into B. subtilis genome. Insertion into the amyE locus provides a selection marker as the bacterium will no longer be able to breakdown starch. An iodine assay can be used to confirm integration. This phenotype makes the transformed bacterium considerably less likely to survive in natural environments.

Chloramphenicol Resistance This vector also contains a positive selection marker, flanked by two dif sites. Chloramphenicol acetyltransferase <bbpart>BBa_J31005</bbpart> provides resistance to chloramphenicol antibiotic. Dif <bbpart>BBa_K316002</bbpart> sites allow excision of the antibiotic marker after integration, thus allowing the same marker to be used again or as a precaution against horizontal gene transfer.

Blunt end cloning site PmeI restriction site <bbpart>BBa_K316013</bbpart> is designed as a cloning site. Due to the 8bp recognition sequence it is a rare site that can be used to cut the vector only once.


Please see ‘Part Design’ section for design considerations and parts used.


Sequence and Features


<partinfo>BBa_K316022 SequenceAndFeatures</partinfo>


PyrD Vector

<partinfo>BBa_K316020 short</partinfo>


PyrD This vector has been designed using the Pyrd 5' <bbpart>BBa_K143001</bbpart> and 3 <bbpart>BBa_K143002</bbpart>' integration sequences for integration into B. subtilis genome. Insertion into the pyrD locus provides a negative selection marker as the bacterium will no longer be able to synthesise uracil. Thus medium supplement of 40ug/ml is required for growth. This phenotype makes the transformed bacterium considerably less likely to survive in natural environments.

Spectinomycin Resistance This vector also contains a positive selection marker, flanked by two dif sites. Aad9 <bbpart>BBa_K143065</bbpart> provides resistance to spectinomycin antibiotic. Dif sites <bbpart>BBa_K316002</bbpart> allow excision of the antibiotic marker after integration, thus allowing the same marker to be used again or as a precaution against horizontal gene transfer.

Blunt end cloning site PmeI restriction site <bbpart>BBa_K316013</bbpart> is designed as a cloning site. Due to the 8bp recognition sequence it is a rare site that can be used to cut the vector only once.


Usage and Biology

Sequence and Features


<partinfo>BBa_K316020 SequenceAndFeatures</partinfo>