Team:Freiburg Bioware/NoteBook/Labjournal/October

From 2010.igem.org

Revision as of 16:58, 18 October 2010 by Patrick (Talk | contribs)

Team:Freiburg Bioware/SubNoteBook

=> Back to Notebook overview

Contents

136. labday 01.10.2010

Test Digestions of yesterdays minipreps

Investigator: Achim, Anna

  • 001_CMV: Cut with EcoRI, PstI & PvuII
    • P654 (Lane 1)
    • P655 (Lane 2)
    • P686 (Lane 3)
    • Control P320 (Lane 4)


  • CMV_ZEGFR:1907_VP2/3_inscap: Cut with EcoRI & SspI
    • P678 (Lane 5)
    • P679 (Lane 6)
    • Control P514 (Lane 7)
      • Results:The expected bands should run at 1700 and 3000 bp. P679 was sent for sequencing.


  • CMV_ZEGFR:1907_VP2/3_inscap_HSPG-KO: Cut with EcoRI & SspI
    • P680 (Lane 8)
    • P681 (Lane 9)
    • P684 (Lane 10)
    • P685 (Lane 11)
    • Control P613 (Lane 12)
      • Results:The expected bands should run at 1700 and 3000 bp. P684 was sent for sequencing.


  • pCerulean_Vp1up_NLS_Darpin: Cut with BamHI & XbaI
    • P676 (Lane 13)
    • P677 (Lane 14)
    • P683 (Lane 15)
    • Control P365 (Lane 20)
      • Results:The expected bands should run at 500 and 4500 bp. However, just one band at ~3000 bp is visible on the gel.


Samples Stefan: Cut with Xba & Spe

    • P670 (Lane 16)
    • P671 (Lane 17)
    • P672 (Lane 18)
    • P673 (Lane 19)



I guess that the pSB1C3_001_CMV did NOT work since the control with BLA looks nearly the same. We should repeat the experiment by cloning the CMV promoter into another vector. I would recommend it because we have a lot of constructs which we should fuse to the CMV promoter and in order to avoid the three-fragment ligation.
Freiburg10 Test digestion of different constructs 1 10.jpg


mini preps of CD clones

Investigator: Kira

c(p689)= 115 ng/ul
c(690)= 151, 20 ng/ul
c(691)= 122,27 ng/ul
c(p692) = 126,42 ng/ul

test digestion of CD clones

Investigator: Kira

Components sample Volume/µL
DNA 4,0 µl
BSA (10x) 2 µl
Buffer no. 4 2,0 µl
Enzyme 1 XbaI 1,0 µl
Enzyme 2 AgeI 1,5 µl
H2O 9,5 µl
Total volume 20


incubation @ 37 C for approx. 2 h

1% agarose gel

Freiburg10 CD testdigestion 2010-10-01.jpg

Biobrick assembly pSB1C3_lITR_hTERT_beta-globin_CD

Investigator: Kira

c(pSB1C3_lITR_hTERT_beta-globin)= 333 ng/ul
c(pSB1C3_CD)= 151 ng/ul

Components vector Volume/µL insert Volume/µL
DNA 4,5 µl 6
BSA (10x) 3 µl 3
Buffer no. 4 3,0 µl 3
Enzyme 1 XbaI 0 µl1,5
Enzyme 2 SpeI 1,5 µl 0
Enzyme 3 PstI-HF 1,0 1
H2O 17 15,5
Total volume 25


incubation @ 37 C for approx. 2 h

1% agarose gel

Freiburg10 CD-beta-globin.jpg

Ligation

DNA-mix: 8 ul (vector 4,6ul)+(insert 3,4 ul)
T4 ligase: 1 ul
T4 buffer: 1 ul
Incubation @ RT for 30 min

Transformation was performed according to the standard protocol w BL21 cells.


Sequencing results of pCerulean_Zegfr:1907_MiddleLinker_VP2/3_HSPG-KO

Investigator: Hanna

Comment: All N-terminal fusion approaches with VP2/3_HSPG-KO revealed positive results except of pCerulean_Zegfr:1907_MiddleLinker_VP2/3_HSPG-KO. Another clone was picked, preped, test digested and sent for sequencing.

Freiburg10 pCerulean Zegfr1907 ML VP23HSPGKO.png


Conclusion: Sequencing results revealed positive results.

Picking clones of pGA14_MiddleLinker_VP2/3_insCap and pGA14_MiddleLinker_VP2/3_HSPG-KO

Investigator: Hanna

Unfortunately there grew a bacteria lawn over night - it was hardly not possible to pick clones. Nevertheless I tried and picked 2 clones of pGA14_MiddleLinker_VP2/3_insCap and pGA14_MiddleLinker_VP2/3_HSPG-KO.
To do: Mini-Prep and test digestion.

Sequencing results of pSB1C3_001_VP2/3_587-KO_BAP and pSB1C3_001_VP2/3_587-KO_6xHis

Investigator: Hanna

Comment: For the creation of our super constructs, the His-Tag and the BAP motif need to be cloned into VP2/3 for N-terminal fusion to VP2. Sequencing results showed that the 6xHis and BAP motif was not cloned into VP2/3_insCap.


To do: Clone 587-KO_6xHis and 587-KO_BAP into pSB1C3_001_VP2/3_insCap 1. via digestion of inserts and 2. via hybridization of referring oligos - digestion of vector with 800-900 ng.

Impressions of transfection of AAV293 with pCerulean_VP1up_NLS_mVenus_VP2/3

Investigator: Adrian

Yesterday AAV293 cells were transfected with pCerulean_VP1up_NLS_mVenus_VP2/3 and GMK-TK30 as gene of interest. Today, nuclear localization of the produced mVenus_VP2/3 fusion protein was visible and can be nicely seen in the following pictures:

Freiburg10 VP mVenus fusion localisation 5.jpg
Freiburg10 VP mVenus fusion localisation 7.jpg

















Conclusion: The VP2/3 fusion particle was transcribed and translated AND was transported back into the nucleus in order to be packaged by the ITR-flanked gene of interest.

Cloning of hGH_rITR into pSB1C3_lITR_phTERT_beta-globin_CFP and lITR_phTERT_beta-globin_mGMK_TK30 into pSB1C3_hGH_rITR

Investigator: Stefan

Vector name:

  • pSB1C3_lITR_phTERT_beta-globin_CFP (P682)
  • pSB1C3_hGH_rITR (P186)

Insert name:

  • pSB1C3_hGH_rITR (P186)
  • pSB1C3_lITR_phTERT_beta-globin_mGMK_TK30 (P672)
  • pSB1C3_lITR_phTERT_beta-globin_mGMK_TK30 (P673)


components volume for P186 /µlvolume of P186 X+E /µl volume of P672 + P673 /µl volume of P682 /µl
DNA 12 125 14
BSA (10x) 2,5 2 2 2
Buffer 4 (10x)3 2 2 2
Enzyme XbaI11 --
Enzyme PstI1- -1
Enzyme EcoI-1 1-
Enzyme SpeI-- 11
H2O669-
Total volume (e.g. 15,20,25,30 µl) 25 252020


Gel:
0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 115 Volt



Freiburg10 digestion hGH rITR.jpg



Comment: Since the first gel revealed problems with samples 672, 673 and 682 another digestion was prepared (same approach as shown above), this time using a 0,8% gel and another loading dye (without SDS).


0,4 g Agarose, 50 ml TAE (0,8%), 3 µl GELRED , at 115 Volt

Freiburg10 digestion hGH rITR backbones.jpg

Comment: Since sample 672 showed no bands this sample was discarded and cloning continued only using 673.




Gel extraction:
Was performed according to protocol.


T4 Ligation:
Ligation was performed over night.

ligation name 186 (X+E) + 673186 + 682
volume of vector 3,51 4,49
volume of insert5,38 2,64


Transformation:
Will be done tomorrow using BL21 cells.

New BL21 cells ready to use!

Investigator: Stefan

137. labday 02.10.2010

Repetition of the approach of subcloning the ViralBricks HSPG-ko BAP and His into VP2/3 with different strategies

Investigator: Bea

Comment: Unfortunately, the last experiment revealed that subcloning of the two ViralBricks did not work out which was shown by the sequencing results. Therefore we need to repeat the approach of subcloning the ViralBricks into the pSB1C3_VP2/3 which than can be used for fusing it to the n-terminal targeting approaches. Two different strategies will be carried out which means that we are digesting the pSB1C3_Viralbricks AND hybridize the oligos (BAP and His) in order to obtain some positive results.


The vector (P415) and the two ViralBricks BAP-ko and His-ko were digested with BamHi and PvuII. The vector was dephosphorylated following the standard protocol. The vector was loaded on a 1% agarose gel before dephosphorylation was conducted. The results can be seen above in the gel picture:


Result:

Freiburg10 Digestion of VP23 inscap 02.10.2010.png


The ligation was performed over night at 18°C with T4-ligase.

BioBrick Assembly of CD and mCherry

Investigator: Bea

Comment: We decided to choose some additional GOI´s for the vectorplasmid so the "new" GOI´s need to be fused to the leftITR_Promoter_betaglobin constructs. Since only one clone grew on the plate prepared by Kira where she fused the CD (cytosine deaminase) to the above mentioned construct I am going to repeat it aswell.


Digestion of the constructs:

  • P689 = pSB1C3_CD
  • P626 = iGEM_mCherry
  • P434 = pSB1C3_leftITR_CMV_betaglobin
  • P434 = pSB1C3_leftITR_phTERT_betaglobin
  • P525 = pSB1C3_VP2/capins


Freiburg10 Digestion of several constructs 02.10.2010.png


Loading plan:

P689 (pSB1C3_CD)     P626 (iGEM mCherry)     P434 (pSB1C3_lITR_CMV_ß-globin)     P437 (pSB1C3_lITR_phTERT_ß-globin)


Results:

Freiburg10 Digestion of GOIs of vectorplasmid 02.10.2010.png


After gel extraction has been performed, the ligation was carried out.

Ligation:

Freiburg10 ligation GOI 02.10.2010.tif


The ligation mix was transformed into XL1-Blue cells and plated on agar plates containing chloramphenicol.

Next steps:
Picking clones and perform Mini-Prep. After the Mini-Preps have been performed this construct needs to be sequenced and tested in cell culture.


comment: just one clone? uhhhh, when did you take out the plate? i put it at around 1 am..maybe they need a while to grow, no? (Kira)
Yep, I found another clone ;-) But the two look pretty good. I took them out today in the afternoon - I guess that is enough time! But if you want I can put them back into the 37° C room??! (Bea)

Mini Prep and test digestion of pGa14_MiddleLinker_VP2/3_HSPG-KO

Investigator: Hanna
Comment: In order to fuse the DARPin to the N-terminus of VP2/3_insCap and VP2/3_HSPG-KO, these motifs need to be fused to the Middle Linker (performed on 30.9.2010). In order to be able to immediately continue with cloning, BL21 cells were transformed and clones were picked in the noon. Now, the DNA needs to be preped and test digested in order to perform a 3-fragment-ligation with the DARPin and the pSB1C3_001_CMV plasmid. Unfortunately the cells of the VP2/3_insCap construct grew not densely enough. Therefore two new clones were picked from the plate and were inoculated in 10 mL LB medium. The other construct (pGa14_MiddleLinker_VP2/3_HSPG-KO) was preped and test digested.

TEST DIGESTION: For both clones:

  • DNA: 4 µL
  • Buffer 4: 1 µL
  • BSA: 1 µL
  • EcoRI: 0.5 µL
  • PstI: 0.5 µL
  • H2O: 3 µL


Incubation: 1 hour.
Agarose gel: 0.8 %, 115 Volt, 1 hour.
Comment: The choice of these restriction enzymes was not clever, because if cloning didn't work, I expect one band at 2379 bp (the insert should hardly be seen) - if it worked one band at 2379 bp and a second at 2005 bp. Fortunately the bands could be separated ans revealed positive results for both clones :
Freiburg10 2 10 TestD.png

Next steps:

  • Mini-Prep and test digestion of pGa14_MiddleLinker_VP2/3_ins Cap.
  • 3 fragment ligation of MiddleLinker_VP2/3_ins Cap or MiddleLinker_VP2/3_HSPG-KO + DARPin + pSB1C3_001_CMV backbone.

Sequencing analysis of HSPG-ko in several IRCK constructs

Investigator: Stefan

pSB1C3_001_RC_IRCK_HSPG-ko_P5tataless_RFC10 clone 1 (P687):

Freiburg10 sequencing results P687.JPG

pSB1C3_001_RC_IRCK_HSPG-ko_P5tataless_RFC10 clone 2(P688):

Freiburg10 sequencing results P688.JPG


pSB1C3_001_RC_IRCK_VP1-ko_HSPG-ko_P5tataless cl1 (P644):

Freiburg10 sequencing results P644.JPG


pSB1C3_001_RC_IRCK_VP2-ko_HSPG-ko_P5tataless cl1 (P646):

Freiburg10 sequencing results P646.JPG


Comment: Sequencing results show that all plasmids contain the HSGP-ko. Working will be continued using P644, P646 and P687.


Mini Prep of pGa14_MiddleLinker_VP2/3_inscap and pSB1C3_Darpin

Investigator: Jessica

  • pSB1C3_Darpin clone1 c=158.5 ng/µl
  • pSB1C3_Darpin clone2 c=205.6 ng/µl
  • pGA14_MiddleLinker_VP2/3_inscap clone 1 c=147.5 ng/µl
  • pGA14_MiddleLinker_VP2/3_inscap clone 2 c=121.0 ng/µl

Test-digestion:

Components pSB1C3_Darpin clone1/2
DNA 1,5 µl
BSA (10x) 1 µl
Buffer no. 4 1 µl
Enzyme 1 XbaI 0,4 µl
Enzyme 2 AgeI 0,4 µl
H2O 5,7 µl
Total volume 10


Hanna wrote that a 3rd enzyme is need for the test digestion of pGA14_MiddleLinker_VP2/3_inscap but I couln't find any sequence of pGA14_MiddleLinker_VP2/3_inscap or pGA14

You can either find these constructs in my workingfolder "DARPin" or the pGA14_MiddleLinker in the "Linker-Folder" and the VP2/3_insCap in many workingfolders!!!! You could have also digest the construct with EcoRI and SpeI... then you would expect a 2 and a 2.3 kb fragment... menas: you have to run the gel at least 1 hour - but it works (see the previous test digestion of the MiddleLinker_VP2/3_insCap construct!!!!).
Freiburg10 testdigestdarpin.jpg

Test digestion of pGA14_MiddleLinker_VP2/3_inscap

Investigator: Achim

  • pGA14_MiddleLinker_VP2/3_inscap clone 1 c=147.5 ng/µl (P698)
  • pGA14_MiddleLinker_VP2/3_inscap clone 2 c=121.0 ng/µl (P699)
  • Control: pGA14_MiddleLinker (P301)
  • Digestion with EcoRI & SalI; should yield two bands of 3400 & 1000 bp. The negative control should only be cut once.
Both samples show correctly sized bands. The negative control ran further than expected, it should be located at 4500 bp.

Mass Midi-Prep III

Investigator: Chris W.

Midi-Prep of:


pSB1C3_001_RC_IRCK_VP1-ko_HSPG-ko_P5tataless cl1 =P700 =B521
pSB1C3_001_RC_IRCK_VP2-ko_HSPG-ko_P5tataless cl1 =P701 =B523
pSB1C3_001_RC_IRCK_HSPG-ko_P5tataless_RFC10 clone 1 =P702 =B561
pCerulean_ZEGFR:1907_MiddleLinker_VP2/3_HSPG-KO clone 2 =P703 =B543
pCerulean_CFP_MiddleLinker_VP2/3_HSPG-KO =P704 =B507
pCerulean_ZEGFR:1907_SEG_VP2/3_HSPG-KO =P705 =B509
pCerulean_ZEGFR:1907_ShortLinker_VP2/3_HSPG-KO =P706 =B510
pCerulean_ZEGFR:1907_LongLinker_VP2/3_HSPG-KO =P707 =B511
pCerulean_6xHis_MiddleLinker_VP2/3_HSPG-KO =P708 =B512
pCerulean_VP1up_NLS_ZEGFR:1907_VP2/3_HSPG-KO =P709 =B513
pCerulean_VP1up_NLS_6xHis_VP2/3_HSPG-KO =P710 =B514
pCerulean_VP1up_NLS_mVenus_VP2/3_HSPG-KO =P711 =B515
pSB1C3_001_RC_IRCK_P5tataless clone 1 =P712 =B516


The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

plasmid-no. P700P701P702P703P704P705P706P707P708P709P710P711P712
concentration (ng/µl)695 370 6011548399636302460261018602913296430301200



Analysis of viral harvest via spectrometer

Investigator: Adrian, Patrick

The motivation: We want to figure out if it is possible to purify our viral stocks via centrifugation with 10.000 g and/or 20.000 g. In theory/ according to the literature the viral particles should be in the cells and attached to the HSPGs at the cellular surfaces.
The plan: Two different viral stocks were prepared:

Stock 1 with VP2-mVenus-fusion-Capsid loaded with TKGMK (4 wells from a 6 well plate)


Stock 2 "standard" virus (4 wells from a 6 well plate)

These two stocks got harvested according to standard protocol (scratching cells, transfer them in to 15 ml falcons, resuling 12ml solution total). After centrifugation (10 min 200g), the supernatant got transferred into two new 15 ml falcons and the pellets were resuspended with 10 ml DMEM Medium. The Stocks got freezed thawed two times so finally there were:

  1. DMEM as negative control
  2. resuspended Pellet with mVenus-fusioned viral capsids
  3. resuspended Pellet with "standard virus"
  4. supernatant with mVenus-fusioned viral capsids
  5. supernatant with "standard virus"


The fluorescence of each stock was measured via spectrometer. After that, stocks 2 and 4 were centrifugated 10min with 10.000 g followed by an other fluorescence measuring. Finally the stocks got spin down with 20.000 g for 10 min
The results:

Freiburg10 mVenus VP fusion fluorescence centrifugation experiment graph.jpg


Freiburg10 mVenus VP fusion fluorescence centrifugation experiment 526nm.jpg


The conclusions: The highest amount of fluorescence was measured in the supernatant, the individual centrifugation steps had no decrease in fluorescence as consequence!


Keep in mind, without further investigation it is not valid to say that we can purify our stocks via 10-20.000 g centrifugation steps, because we dont know if the viral capsids are still intact! The FACS analysis are not sufficient enough to make a decision, because our last samples had YFP as GOI (=> so efficient cell sorting was not possible). We need to do qPCRs to make a valid evidence.

200µl-Transduction for testing the pTERT-promoter

Investigator: Adrian, Patrick
We transduced A431, HT1080 and AAV293 cells with 4 different viral stocks:

  1. control vector from 15.9, 750.000 cells, 3.3 µg approach
  2. P25 R/C= 326 pTERT_mVenus
  3. P26 pAAV_RC_RepCapIns_SDMKpnI clone 1 P431 pTERT_mVenus
  4. His-linker-fusion

CRUCIAL: There was not enough viral stock: so the whole Transduction was performed with 200µl instead of 1000µl

There are 45 samples to FACS on monday 4.10. Tripple values for each stock of each cell lines.

Transfection

Investigators: Adrian, Patrick
Transfection followed standard protocol (3.3 µg of each plasmid, 1 ml 0.3M CaCl2 and 1 ml of 2xHBS buffer PH 11.12) but with 20 min incubation time (Ca-DNA-2xHBS)
following stocks:

138. labday 03.10.2010

Proceeding with the approach of subcloning the ViralBricks HSPG-ko BAP and His into VP2/3 with different strategies

Investigator: Bea

Comment: Ligation was carried out over night and transformation will be performed today.

Since the digested vector was not sufficient for all four ligation I decided to perform the ligation only with the hybridized oligos 587-ko His and the digested Viralbricks 587-HSPG-ko His and BAP. If the digested BAP insert reverals no positive results, the hybrizied oligos for BAP can be used for another approach. The transformation was carried out in

Midi-Prep of pSB1C3_lITR_CMV_betaglobin_mVenus_hGH_rITR clone1

Investigator: Chris W.

Midi-Preps of pSB1C3_lITR_CMV_betaglobin_mVenus_hGH_rITR clone1 =P713 =B200


The Midi-Prep were performed according to the standard protocol yielding the following concentrations:

plasmid-no. P713
concentration (ng/µl)1248,3


139. labday 04.10.2010

Three fragment ligation: pSB1C3_001_CMV_VP1up_NLS_Targeting_HSPG-KO_VP2/3

Investigator: Achim

Four ligations in total:

Used plasmids:

´Seeding AAV293 for Transfection

Investigator: Patrick

9 6-well plates were prepared for the transfection tomorrow. 480000 cells were seeded into each well.

FACS Analysis of pTERT_mVenus-loaded-viral particles and pCerulean_VP1up_His_VP2/3

Investigators: Kerstin, Anissa

45 samples of the three cell lines: AAV293, A431 and HT1080 got transduced (see 2.10) with following viral stocks:

1.


2.


3.


4.



Assembly of pSB1C3_CMV_DARPin_VP2/3_insCap and pSB1C3_CMV_DARPin_VP2/3_HSPG-KO

Investigators: Hanna

Comment: We also want to test the DARPin_E01 for the N-terminal fusion approaches. Today a 3 fragment ligation will be performed in order to complete the VP2 fusion constructs with the DARPin.
Because 2 test digestions showed that the fusion of the DARPin to VP1up_NLS didn't work as ecpected (insert is too large) this has to be repeated before also the VP1 insertion with the DARPin can be completed.


Digestion

components volume of pSB1C3_CMV /µl volume of pG14_ML_VP2/3_insCap /µl volume of pG14_ML_VP2/3_HSPG-KO /µl volume of pSB1C3_001_DARPin /µl
DNA 9 6.8 10 5
BSA (10x) 2 3 3 2
Buffer 4 (10x) 2 3 3 2
SpeI 1 - - -
PstI 1 1 1 -
NgoMIV - 1 1 -
XmnI - 1 1 -
XbaI - - - 4
H2O 5 14.2 11 9
Total volume 20 30 30 20



Agarose-Gel:


0.5 g Agarose, 50 mL TAE (1 %), 3 µL GELRED, at 115 Volt, running time: 45 minutes

Sample Sample/µl] Loading dye (6x)/µl Expected size 1
CMV 20 µl 4 µl ~ 2700 bp
MiddleLinker_VP2/3_insCap 30 µl 4 µl ~ 2000 bp
MiddleLinker_VP2/3_HSPG-KO 30 µl 4 µl ~ 2000 bp
DARPin 20 µl 4 µl ~ 475 bp



Freiburg10 4 10 Dig.png


Gelex



Ligation


Construct CMV (µl) MiddleLinker_VP2/3_insCap (µl) DARPin (µl)
pSB1C3_CMV_DARPin_MiddleLinker_VP2/3_insCap 1 3.5 3.5


Construct CMV (µl) MiddleLinker_VP2/3_HSPG-KO (µl) DARPin (µl)
pSB1C3_CMV_DARPin_MiddleLinker_VP2/3_HSPG-KO 1 3.5 3.5


Trafo


Was performed following the standard protocol.
Cells: XL1b

Miniprep of serveral constructs

Investigator: Stefan

Glycerol stocks were prepared:
B573 pSB1C3_lITR_CMV_betaglobin_mCherry clone1
B574 pSB1C3_lITR_CMV_betaglobin_mCherry clone2
B575 pSB1C3_lITR_CMV_betaglobin_CD clone1
B576 pSB1C3_lITR_CMV_betaglobin_CD clone2
B577 pSB1C3_lITR_phTERT_betaglobin_mCherry clone1
B578 pSB1C3_lITR_phTERT_betaglobin_mCherry clone2
B579 pSB1C3_lITR_phTERT_betaglobin_CFP_hgH_rITR clone 1
B580 pSB1C3_lITR_phTERT_betaglobin_CFP_hgH_rITR clone 2
B581 pSB1C3_lITR_phTERT_betaglobin_CFP_hgH_rITR clone 1
B582 pSB1C3_lITR_phTERT_betaglobin_CFP_hgH_rITR clone 2
B583 pSB1C3_lITR_phTERT_betaglobin_CD clone 1
B584 pSB1C3_lITR_phTERT_betaglobin_CD clone 2
B585 pSB1C3_lITR_phTERT_betaglobin_CD clone 3
B586 pSB1C3_001_VP2/3_capins_587_KO_His_clone1
B587 pSB1C3_001_VP2/3_capins_587_KO_His_clone2
B588 pSB1C3_001_VP2/3_capins_587_KO_His_clone3
B589 pSB1C3_001_VP2/3_capins_587_KO_His_oligo_clone1
B590 pSB1C3_001_VP2/3_capins_587_KO_His_oligo_clone2
B591 pSB1C3_001_VP2/3_capins_587_KO_His_oligo_clone3
B592 pSB1C3_001_VP2/3_capins_587_KO_Bap_clone1
B593 pSB1C3_001_VP2/3_capins_587_KO_Bap_clone2
B594 pSB1C3_001_VP2/3_capins_587_KO_Bap_clone3




Mini-Prep was performed according to the standard protocol

P714 pSB1C3_lITR_CMV_betaglobin_mCherry clone1 c = 89,3 ng/µl
P715 pSB1C3_lITR_CMV_betaglobin_mCherry clone2 c = 312,4 ng/µl
P716 pSB1C3_lITR_CMV_betaglobin_CD clone1 c = 254,4 ng/µl
P717 pSB1C3_lITR_CMV_betaglobin_CD clone2 c = 314,8 ng/µl
P718 pSB1C3_lITR_phTERT_betaglobin_mCherry clone1 c = 409,8 ng/µl
P719 pSB1C3_lITR_phTERT_betaglobin_mCherry clone2 c = 322,1 ng/µl
P720 pSB1C3_lITR_phTERT_betaglobin_CFP_hgH_rITR clone 1 c = 265,1 ng/µl
P721 pSB1C3_lITR_phTERT_betaglobin_CFP_hgH_rITR clone 2 c = 238,8 ng/µl
P722 pSB1C3_lITR_phTERT_betaglobin_mGMK_TK30_hgH_rITR clone 1 c = 145,9 ng/µl
P723 pSB1C3_lITR_phTERT_betaglobin_mGMK_TK30_hgH_rITR clone 2 c = 100,5 ng/µl
P724 pSB1C3_lITR_phTERT_betaglobin_CD clone 1 c = 176,9 ng/µl
P725 pSB1C3_lITR_phTERT_betaglobin_CD clone 2 c = 165,0 ng/µl
P726 pSB1C3_lITR_phTERT_betaglobin_CD clone 3 c = 149,0 ng/µl
P727 pSB1C3_CMV c = 225,5 ng/µl
P728 pSB1C3_hGH_rITR c = 129,6 ng/µl
P729 pSB1C3_leftITR_CMV_beta-globin c = 243,4 ng/µl
P730 pSB1C3_leftITR_hTERT_beta-globin c = 81,8 ng/µl
P731 pSB1C3_001_VP2/3_insCap c = 466,1 ng/µl
P732 pSB1C3_001_VP2/3_capins_587_KO_His_clone1 c = 107,6 ng/µl
P733 pSB1C3_001_VP2/3_capins_587_KO_His_clone2 c = 110,3 ng/µl
P734 pSB1C3_001_VP2/3_capins_587_KO_His_clone3 c = 121,7 ng/µl
P735 pSB1C3_001_VP2/3_capins_587_KO_His_oligo_clone1 c = 101,0 ng/µl
P736 pSB1C3_001_VP2/3_capins_587_KO_His_oligo_clone2 c = 101,6 ng/µl
P737 pSB1C3_001_VP2/3_capins_587_KO_His_oligo_clone3 c = 87,0 ng/µl
P738 pSB1C3_001_VP2/3_capins_587_KO_Bap_clone1 c = 106,5 ng/µl
P739 pSB1C3_001_VP2/3_capins_587_KO_Bap_clone2 c = 110,2 ng/µl
P740 pSB1C3_001_VP2/3_capins_587_KO_Bap_clone3 c = 71,46 ng/µl
P741 pGGTBT7-ZEGFR:1907_Middlelinker_EGFP_His c = 115,4 ng/µl

140. labday 05.10.2010

Site-directed mutagenesis in pSB1C3_mGMK_TK30 construct

Investigator: Bea

Comment: Since we are still waiting for the ordered TK30, idea was to mutate the PstI site in the TK30 region. After mutating the PstI it is ready for submitting. Addtionally the ordered and received sr3ß can be subcloned.

Protocol using the QuickChange Ligthning Kit from Stratagene:

https://2010.igem.org/Image:Freiburg10_SDM_PstI_TK30_05_10.tif

The follwoing PCR was used:

After the PCR program was conducted, I added 1 µL of DpnI provided with the Kit to each sample and incubated it for 10 minutes.
For transformation XL-10 Gold cells with 2µL beta-mercaptoethanol have been used and plated on agar plates containing chloramphenicol.

Cellculture: Bad news

Something happened to our virus-production cell line AAV293.

Nearly all AAV293 cells are dead.

The whole Loop-Insertion Transfection from 3.10 is lost, our actual culture flasks aswell. We dont know exactly the cause of this cellular mass mortality. Maybe someting is wrong with the new FCS-stocks.

Repetition of pCerulean_VP1up_NLS_DARPin

Investigators: Achim


Prep. Gel:

Freiburg10 05102010 darpin label.png


Harvest of viral stocks

Investigators:


Number of viral stocks: 4


Motivation:
The two new standard vectors are from now on called Control Vectors, to get valide data. The TKGMK Stock will be used for the MTT-ASSAY.

Repetition of Cloning lITR_phTERT_beta-globin_mGMK_TK30 into pSB1C3_hGH_rITR

Investigator: Anna

Comment: Second approach of Cloning lITR_phTERT_beta-globin_mGMK_TK30 into pSB1C3_hGH_rITR, first one didn't work (see labday 01.10.).


Vector name:

Insert name:


components volume for Pp728 /µlvolume of P673 /µl
DNA 11,6 7,5
BSA (10x) 2 2
Buffer 4 (10x)2 2
Enzyme XbaI1-
Enzyme EcoRI11
Enzyme SpeI-1
H2O2,46,5
Total volume (e.g. 15,20,25,30 µl) 20 20


0,4 g Agarose, 50 ml TAE (0,8%), 3 µl GELRED , at 115 Volt


Freiburg10 Cloning of rITR hGH.jpg

Gel extraction:
Was performed according to the standard protocol.

rITR_hgHlITR_phTERT_betaglobin_mGMK_TK30
Expected size of fragment 2690 bp3045 bp
DNA-concentration [ng/µl] 37,4 19,81


T4 Ligation:

volume of vector 1,1 µl
volume of insert6,9 µl


Transformation:
Was done following the standard protocol using BL21 cells.

Seeding HT1080 and AAV431 for transduction

for transduction with following viral stocks:

Cloning of pSB1C3_lITR_phTERT_beta-globin_CD and pSB1C3_lITR_CMV_beta-globin_CD

Investigator: Anissa

Vector name:


components volume of P730 /µlvolume of P729 /µl volume of P690 /µl
DNA 124,19,9
BSA (10x) 2 1,52
Buffer 4 (10x)2 1,5 2
Enzyme AgeI11 -
Enzyme NgoMIV-- 1
Enzyme PstI11 1
H2O15,94,1
Total volume (e.g. 15,20,25,30 µl) 20 1520


Gel:
for vectors and insert :
0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 110 Volt


Freiburg10 p730,p729,p690.png



Gel extraction:
Was performed according to protocol.


T4 Ligation:


Transformation:
Was performed according to standard protocol using BL21 cells.

Repetition of the test-digestion of p714,p715,p719,p720,p721,p724 and p726

Investigator: Anissa






Freiburg10 TD p714,p715p719,p720,p721,p724,p726.png


Repetition: Cloning of VP2/3_BAP_HSPG-KO and VP2/3_His_HSPG-KO into pCerulean_Zegfr:1907_Middlelinker and VP2/3_His_HSPG-KO into pCerulean_VP1up_NLS_mVenus

Investigator: Stefan

Comment: Cloning of 587-ko_His and 587-ko_BAP into pSB1C3_001_VP2/3_capins did not work out last time. Since cloning of VP2/3_capins started before sequencing results arrived, this experiment has to be repeated.


Vector name:

Insert name:


components volume for inserts (P734 + P738) /µlvolume of P408 /µl volume of P426 /µl
DNA 14 33
BSA (10x) 3 2 2
Buffer 4 (10x)3 2 2
Enzyme NgoMIV1- -
Enzyme PstI11 1
Enzyme MscI1- -
Enzyme AgeI-1 1
H2O71111
Total volume (e.g. 15,20,25,30 µl) 30 2020


Gel:
0,4 g Agarose, 50 ml TAE (0,8%), 3 µl GELRED , at 115 Volt



Freiburg10 digestion cloning VP2 3 CapIns 587 ko His Bap.jpg



Gel extraction:
Was performed according to protocol.


T4 Ligation:

ligation name 408 + 734408 + 738426 + 734426 + 738
volume of vector 3,81 3,81 3,56 3,56
volume of insert4,19 4,194,444,44


Transformation:
Was performed according to standard protocol using BL21 cells.

PCR of VP1-3

Investigator: Kira

Comment: this approach was already repeated at least 2 times, but still even if its not one of the very important constructs, it should be finished by end of the month.

PCR*PCR program:

c(pKEX_VP1)=488 ng/ul
c(pKEX_VP2)=484 ng/ul
c(pKEX_VP2)=485 ng/ul

VP-1 praefix primer: 089 VP-2 praefix primer: 090 VP-3 praefix primer: 091 VP1-3 suffix reg_25: 0120

components volume in µl
5x Phusion HF buffer 10
10 mM dNTP mix 1
primer_for (1:10 dilution) 2,5
primer_rev (1:10 dilution) 2,5
DNA template (1:100) 0,5
DMSO 0
Phusion polymerase 0,5
H2O 33
Total volume (e.g. 50 µl) 50


The PCR programm for all 3 samples was the same due to the weakest primer, which is VP-1 praefix primer

CyclesTemperatureTime
98°C30 sec
10x98°C10 sec
60°C25 sec
72°C1 min 6 sec
20x98°C15 sec
72°C1 min 31 sec
1x72°C5 min
Hold 4°C



1% agarose gel

The gel shows only the primer bands on the bottom of the gel --> PCR failed again. Its going to be repeated tomorrow.

141. labday 06.10.2010

Cellculture

Investigator Patrick
Not only the 293 cells look bad. The A431 cells and the HT1080 cells die, too. There is no contamination detectable. Maybe there is something wrong with the DMEM because the now 100 % serum-free AAV293 cells dont die.

Transduction of HT1080 and A431 cells

The cells are not adherent so no transduction was performed.

Sequence analysis of pSB1C3_CD

Investigator: Bea

Comment: After test digestion revealed positive results, we sent one clone for sequencing (P690) with VF-2 and VR-2 primers. The tube numbers are: SB_1 and SB_2.

Results:


Freiburg10 P690 CD sequence analysis.png

Site-directed mutagenesis of pSB1C3_CD

Investigator: Bea

Comment: Since the sequence analysis revealed that the PstI restriction iste within the CD is NOT removed I prepared another Quickchange in order to mutate the PstI site.

Protocol:

Freiburg10 protocol SDM CD 06.10.2010.PNG



The following PCR was used:

After the PCR program was conducted, I added 1 µL of DpnI provided with the Kit to each sample and incubated it for 10 minutes at 37°C.
For transformation XL-10 Gold cells with 2µL beta-mercaptoethanol have been used and plated on agar plates containing chloramphenicol.

Sequencing analysis

Investigator: Stefan
Comment:
Sequencing reults of pSB1C3_CMV_ZEGFR:1907_VP2/3_CapIns (P679), pSB1C3_CMV_ZEGFR:1907_VP2/3_CapIns_HSPG-ko (P684), pSB1C3_001_VP2/3_587_HSPG-ko_His(P734) and pSB1C3_001_VP2/3_587_HSPG-ko_BAP(P738). In P679 and P684, CMV_ZEGFR:1907 was cloned in front of VP2/3, in P734 and P738, 587_HSPG-ko_His/BAP was cloned into the 587 loop.


Freiburg10 sequencing pSB1C3 CMV Affibody VP2 3 CapIns (P679).JPG
Freiburg10 sequencing pSB1C3 CMV Affibody VP2 3 CapIns HSPG-ko (P684).JPG
Freiburg10 sequencing pSB1C3 001 VP2 3 587 HSPG-ko His (P734).JPG
Freiburg10 sequencing pSB1C3 001 VP2 3 587 HSPG-ko BAP (P738).JPG

Test Digestion of pSB1C3_CMV_DARPin_MiddleLinker_VP2/3_insCap and pSB1C3_CMV_DARPin_MiddleLinker_VP2/3_HSPG-KO


Investigator: Hanna
Comment: Besides the Affibody we also want to test and characterize the DARPin E01 as a targeting motif for EGFR over expressing tumor cells. The day before yesterday a 3 fragment ligation was performed with the CMV promoter, DARPin and pSB1C3_VP2/3_insCap/pSB1C3_VP2/3_HSPG-KO.
2 clones were picked from each approach and preped today.

TEST DIGESTION:


Incubation: 2 hours.

Freiburg10 6 10 TestDARPin.png


Conclusion: Test digestion looks well: Expected fragments = 756 bp and 4409 bp.
Two samples were sent for sequencing to GATC using the CMV-F primer.

Repetition: Cloning of CFP into pSB1C3_lITR_phTERT_beta-globin and hgH_rITR into pSB1C3_lITR_CMV_beta-globin_mCherry and into pSB1C3_lITR_phTERT_beta-globin_mCherry

Investigator: Stefan

Comment:


Vector name:

Insert name:


components volume for inserts (P666 + P728) /µlvolume of vectors P437 + P715 + P719 /µl
DNA 10 4
BSA (10x) 2 2
Buffer 4 (10x)2 2
Enzyme PstI11
Enzyme XbaI1-
Enzyme SpeI-1
H2O410
Total volume (e.g. 15,20,25,30 µl) 20 20


Gel:
0,4 g Agarose, 50 ml TAE (0,8%), 3 µl GELRED , at 115 Volt



Freiburg10 CFP and hgh rITR.jpg



Gel extraction:
Was performed according to protocol.


T4 Ligation:

ligation name 437 + 666715 + 728719 + 728
volume of vector 5,08 5,13 5,34
volume of insert2,92 2,872,66


Transformation:
Was performed according to standard protocol using BL21 cells.

Biotinylation of the monoclonal IgG antibody A20

The biotinylation of the A20 antibody that recognizes the assembled virus was performed with a biotinylation Kit purchased from Dojindo.

Repetition of VP1-3 PCR

Investigator: Kira
PCR program:

c(pKEX_VP1)=488 ng/ul
c(pKEX_VP2)=484 ng/ul
c(pKEX_VP2)=485 ng/ul

VP-1 praefix primer: 089 VP-2 praefix primer: 090 VP-3 praefix primer: 091 VP1-3 suffix reg_25: 0120

Regarding the primer sequences, DMSO will be added to the PCR samples.

components volume in µl
5x Phusion HF buffer 10
10 mM dNTP mix 1
primer_for (1:10 dilution) 2,5
primer_rev (1:10 dilution) 2,5
DNA template (1:100) 0,5
DMSO 2
Phusion polymerase 0,5
H2O 31
Total volume (e.g. 50 µl) 50


The PCR programm for all 3 samples was the same due to the weakest primer, which is VP-1 praefix primer

CyclesTemperatureTime
98°C30 sec
10x98°C15 sec
59°C25 sec
72°C1 min 11 sec
20x98°C15 sec
72°C1 min 36 sec
1x72°C5 min
Hold 4°C


1% agarose gel
File:Freiburg10 VP1-3 PCR.jpg

Digestion of plasmid backbone:

pSB1C3_001 is used as backbone

Components vector Volume/µL
DNA 3,0 µl
BSA (10x) 2 µl
Buffer no. 4 (10x) 2,0 µl
Enzyme 1 AgeI 1,5 µl
Enzyme 2 SpeI 1,0 µl
H2O 10,5 µl
Total volume 20


incubation @ 37 C for approx. 2 h

1% agarose gel
File:Freiburg10 digestion-pSB1C3 001.jpg

Digestion of PCR product:

Components PCR product Volume/µL
DNA 30,0 µl
BSA (100x) 4,5 µl
Buffer no. 4 4,5 µl
Enzyme 1 NgoMIV 1 µl
Enzyme 2 SpeI 1,0 µl
H2O 4 µl
Total volume 45


incubation @ 37 C for approx. 2 h

ligation with T4 ligase was performed over-night

Cloning of Rep into Rep52 and Rep78

Investigator: Kira
Comment: In order to perfom PCR, we have to clone the ordered Rep gene into Rep52 and Rep78 backbones.

Regarding the activity conditions of the enzymes, digestion was performed in 2 steps.

Components insertRep78Rep52
DNA 3 µl 2 µl 7 µl
BSA (100x) 2 µl 2 µl 2 µl
Buffer no. 3 2,0 µl 2,0 µl 2,0 µl
Enzyme SwaI 1,0 µl 1,0 µl 1,0 µl
H2O 12 µl 13 µl 8 µl
Total volume 20


incubation @ 25 C for approx. 2 h
Dephosphorylation was performed because of the blunt cleavage. PCR phosphorylation followed in order to get rid off the buffer because Buffer 3 is not appropriate for further digestion. after PCR phosphorylation:
c(pMA_RC-insert)= 21,75 ng/ul c(rep52)= 75,82 ng/ul c(rep78)= 2,47 ng/ul

Components insertRep78Rep52
DNA 30 µl 30 µl 30 µl
BSA (100x) 0 µl 0 µl 0 µl
Buffer no. 2 4,5 µl 4,5 µl 4,5 µl
Enzyme HindIII 1,0 µl 1,0 µl 1,0 µl
H2O 9,5 µl 9,5 µl9,5 µl
Total volume 45


incubation for 2h at 37C

File:Rep52&Rep78.jpg

the gel shows that Rep78 backbone got lost.. Regarding the concentration, which was measured after PCR purification it might be possible --> digestion of Rep78 will be repeated tomorrow, while Rep52 is ready for ligation.

142. labday 07.10.2010

DARPin VP2 Fusion: Sequencing results

Investigator: Hanna

COMMENT: The DARPin was fused with the Middle Linker to the VP2/3 BioBrick and cloned into the pSB1C3 backbone. Yesterday's test digestion looked well, so one clone of the VP2/3_insCap and one clone of the VP2/3_HSPG-KO construct was sent for sequencing.

pSB1C3_CMV_DARPin_MiddleLinker_VP2/3_HSPG-KO
pSB1C3_CMV_DARPin_MiddleLinker_VP2/3_insCap



















CONCLUSION: Sequencing looked well: 3 fragment ligation was successful - because the CMV-F primer was used for sequencing, the CMV promoter was successfully inserted. As shown in the alignments also the DARPin was inserted. This is the first time that the DARPin was sequenced - thus the original sequence must also be OK!
These two constructs are finished and are ready to be tested in cell culture via qPCR, ELISA,... and can be stored in our BioBrick Box for submitting.

Repetition of cloning of ordered Rep into Rep78

Investigator: Kira
Comment: Because the gel from yesterday did not show any bands in the Rep78 line, I desided to repeat this approach but to use more DNA, in order to be able to continue with the second digestion (see labday 06.10.2010)

The same procedure but with 7 ul Rep78 (c=556 ng/ul). After the first digestion, dephosporylation and PCR purification were performed and DNA was measured.

As a control, the ordered Rep was used again.

c(p190)= 28 ng/ul
c(Rep78)= 6,90 ng/ul

the second digestion as performed despite the low concentration.

File:Freiburg10 2010-10-07.jpg

The gel shows once again no detectable DNA of Rep78.

Transformation of VP1-3 & pSB1C3_001 and p190 &Rep52

Investigator: Kira

The transformation was performed according to the standard protocol with BL21. Compared to VP1-3 transformed cells, Rep52 cells revealed no visible pellet after centrifugation, thus 300 ul of the cells suspension was plated.

Test digestion of different constructs

Investigator: Anna


Gel1_Part1: The 453 constructs were cut with BamHI and SspI, the 587 constructs with SalI and PvuII. The inserts were cloned into pSB1C3_RepCap_p5tatless.

Freiburg10 Test digestion from 07.10 Part1.jpg


All of the following constructs were cut with EcoRI and PstI:


Gel1_Part2:
Freiburg10 Test digestion from 07.10 Part2.jpg


Gel2:
Freiburg10 Test digestion from 07.10 Part3.jpg

143. labday 08.10.2010

Mini-Prep and test digestion of several constructs

Investigator: Stefan

Comment: Mini-Preps were performed according to protocol:


Glycerol stocks were prepared:


Mini-Prep was performed according to standard protocol:

Test digestion:

Comment:Additionally, P771 and P781 from yesterday's Mini-Prep were digested again.


Components P791 + P792 / µlP793 - P796 / µlP771 / µlP781 / µl
DNA 1,5 1 3 7,7
Buffer 4 1 1 1 1
BSA (10x) 1 1 1 1
PstI 0,3 0,3 0,3 0,3
EcoRI 0,3 0,3 --
BpmI0,3 - --
H2O 5,6 6,44,2-
Total volume 10 10 10 10

Results:
Freiburg10 test digestion 081010.jpg

Comment:Samples P791 to P796 perform like expected, they can be used for further cloning or testing in cell culture. P771 show strange bands, a test PCR will be performed to verify successful cloning. P781 does not show any DNA at all like last time. A new SDm will be performed for pSB1C3_mGMK_TK30 (P675).

Test-PCR of pSB1C3_lITR_phTERT_beta-globin_mGMK_TK30_hgH_rITR

Investigator: Stefan

Comment: Test digestion showed strange results (an additional band at 500bp which does not fit any expectations), therfore an additional test-PCR was performed to verify successful cloning of the complete constructs.


Components positive control / µlnegative control / µlsample P771 / µl
5x Phusion HF buffer 10 10 10
10mM dNTP mix 1 1 1
Primer for (1:10 dilution) O107 2,5 O29 2,5 O29 2,5
Primer rev (1:10 dilution) O108 2,5 O191 2,5 O191 2,5
DNA template 1 (1:100) 1 (1:100) 1 (1:100)
DMSO 1 1 1
Phusion Polymerase 0,5 0,5 0,5
H2O 32,5 32,532,5
Total volume 50 50 50

Gel:
0,5 g agarose, 50 ml TAE (1%), 115V, 50 minutes

Freiburg10 test PCR 081010.jpg

Comment: Test PCR showed successful cloning of lITR_phTERT_beta-globin_mGMK_TK30 into pSB1C3_hgH_rITR. SDM to remove PstI in TK30 can be performed.

Trafo evaluation of VP1-3 and Rep52 constructs

Investigator: Kira
VP1-3 contain lots of colonies, while Rep52 plate is empty


Repetiton: Site-directed mutagenesis in pSB1C3_mGMK_TK30 construct

Investigator: Stefan

Comment: The first try to remove the PstI restriction site delivered no plasmid DNA, so another approach needs to be started.

Protocol using the QuickChange Lightning Kit from Stratagene:

Ingredients:

Ingredients Volume / µl
10x reaction buffer 2,5
dNTP0,5
forward primer: O191 0,69
reverse primer: O192 0,71
DNA Template5
QuikSolution Reagent0,75
QuikChangeLightning Enzyme0,5
H2O14,35
Total volume25



The following PCR program was used:

Digestion using DpnI:
To digest methylated and hemi-methylated DNA, 1 µl of DpnI was added and the mixture was incubated for 10 minutes at 37 °C.
Transformation:
Since XL-10 Gold cells delivered a bacteria lawn on the plates, this time XL1b cells were used.

144. labday 09.10.2010

Mini-Prep of pSB1C3_CD_SDM-PstI

Investigator: Stefan

Comment: Mini-Prep was performed according to standard protocol.

Glycerol stocks were prepared:


Mini-Prep was performed according to standard protocol:

Comment: Since Mini-Prep from XL-10 cells yielded that little plasmid, a re-trafo will be performed using BL21 cells.


Transformation:
A 1:10 dilution of both plasmids was prepared and 1 µl was added to BL21 cells.
Transformation was performed according to standard protocol. Cells were plated on agar plates containing chlorampenicol.

Preparation of competent cells and Test-Trafo

Investigator: Stefan

Preparation of BL21 (red line) and XL1-blue (green X) cells was performed according to standard protocol.
Do not use cells until further notice!

Test PCR of qPCR primer for phTERT

Investigator: Bea

Comment: The GOI which is flanked by the ITRs and encapsidated in the capsid is the mGMK_T30 driven by the pHTERT promoter which is only active in several tumor cells. Since we have never tested the primers if they work I wanted to do that. This time I tried to use the TAQ polymerase which we received from Peqlab. Since I could not find a standard protocol for the PCR provided by peqlab I tried to compare several manuals and combine them.

Protocol: I did not tried the approach with ENhancer Solution.

Freiburg10 qPCRtest1 09.10.PNG


I checked the protocol today (10.10) and recognized that I added accidentially to much buffer to the PCR-Mix. Maybe this could be another explanation for the negative results of the PCR.

The following PCR was used:

Result:
Unfortunately the expected PCR product with a size of 182 bp could not be detected as it can be seen in the agarose gel. I can not say if the protocol needs to be modified or if the primer pair did not anneal adequatly. Therefore, I am going to repeat the PCR tomorrow by using the Phsuion polymerase for checking the results.

Cloning of p40 in front of VP123

Investigator: Bea

Comment: We want to test the promoter strenth of several promoters (CMV, P40, p5, p5tataless) and compare them in order to provide the possibility of choosing the proper promoter for each experiment and to titrate the plasmids during transfection. Therefore, the p40 promoter needs to be fused in front of the VP123 construct in order to compare the CMV and the p40 promter

Protocol:

Freiburg10 Protocol p40 to VP123 09.10.PNG



The following results of the agarose gel can be seen. The fragments were cut out and a gel extraction has been performed:

Freiburg10 VP123 digest 10.10.2010.png


For transformation BL21 cells have been used and plated on agar plates containing chloramphenicol.

Site-directed mutagenesis of pSB1C3_leftITR_phtert_betaglobin_mgmktk30_hGH_rITR

Investigator: Bea

Comment: Since we still have the PstI restriction site within the sequence we need to delete the restriction enzyme site.

Protocol:

Freiburg10 SDM P771 09.10.PNG



The following PCR was used:

After the PCR program was conducted, I added 1 µL of DpnI provided with the Kit to each sample and incubated it for 10 minutes at 37°C.
For transformation XL-1 cells have been used because the bacterias of the last site-directed mutageneis approaches using XL-10 cells showes extensive grwoth (bacterial lawn). I plated on the transformaned cells on agar plates containing chloramphenicol.

Cloning HSPG-KO_empty into pSB1C3-001_pCMV_[AAV2]VP123_453_RGD and pSB1C3-001_pCMV_[AAV2]VP123_453_Z34C

Investigator: Achim


the gel picture for the insert has not been saved. But it did show a faint band at ~50 bp.

Cellculture

Investigator Patrick

Transduction of HT1080 and A431. Yesterday 3 6-well plates of HT1080 and A431 were seeded with 200.000 cells into each well. The transductions were performed with the following AAV2s
Nothing to complain about, but to compliment on this nice wiki entry! well done pat! ;-)


Expected results:

145. labday 10.10.2010

Repetition of Test-PCR of qPCR primer for phTERT

Investigator: Bea

Comment: The GOI which is flanked by the ITRs and encapsidated in the capsid is the mGMK_T30 driven by the pHTERT promoter which is only active in several tumor cells. Since we have never tested the primers if they work I wanted to do that. For several reason I decided to use the Phusion polymerase to perform the PCR. First, we are familiar with the handling of this polymerase and have a protocol which we already used several times and second, since I could not find any standard protocols for the TAQ-polymerase provided by PeqLab, as mentioned yesterday, I will rely on the Phusion polymerase.

Protocol:

Freiburg10 Protocol PHusion qPCRprimertest 10.10.JPG


Results: After PCR was completed, I loaded a 1.5% agarose gel. The results can be seen in the picture: There is a intensive band aat around 150-180bp which correspond to the expected fragment size of 182 bp. We can conclude that the the primers work and that they can be used in the qPCR approaches. One note along the way: I´ve missed the fact that the buffer in which the gel was loaded, was TBE and not TAE. Still the fragment looks well, even though the gel did not appeared to ran normal.

Freiburg10 PCRprodcut qPCRtest hTERT 10.10.png

New XL1b and BL21 cells ready to use!

Investigator: Stefan

Cloning Super Constructs and VP2 N-terminal Fusion_ HSPG-KO constructs into pSB1C3_001_CMV or pSB1C3_CMV

Investigator: Hanna

Comment: In order to send our final VP2 N-terminal Fusion constructs with HSPG konock down and our super constructs to the registry, they need to be cloned into the pSB1C3 backbone.
We would prefer sending them in the pSB1C3_001 plasmid, because it does its ViralBricks restriction sites were deleted. Therefore one can cut out the 587_KO ViralBrick and replace it by any ViralBrick of interest.
Because test digestion of pSB1C3_001_CMV didn't show any clear results, I will digest both clones and in addition to that pSB1C3_CMV.


Freiburg10 10 10 Digestion1 (2).jpg
Freiburg10 10 10 Digestion.jpg


Incubation: 2 h, 37°C

Midi-Prep

Investigator: Chris W.

Midi-Prep of:


pCerulean_VP1up_NLS_Zegfr:1907_VP2/3-Capins clone 2 =P799 =B401
pSB1C3_CMV_DARPin_MiddleLinker_VP2/3_insCap clone 2 =P800 =B595
pSB1C3_CMV_DARPin_MiddleLinker_VP2/3_HSPG-KO clone 1 =P801 =B596
pSB1C3_left-ITR_phTERT_beta-globin_mGMK_TK30_hGH_right-ITR clone 1 =P802 =B622



The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

plasmid-no. P799P800P801P802
concentration (ng/µl)662,8 911,3 495,6673,9



Checking trafo plates of Viralbrick approaches, SDM of pSB1C3_leftITR_phtert_betaglobin_mgmktk30_hGH_rITR and P40_VP123

Investigator: Bea

Comment: Unfortunately, no cells grew on the agar plates containing cm. Therefore, we repeat the Trafo ones again and plate them on new agar plates hoping that colonies will grow over night.

I used the ligations prepared yesterday and transformed new bacterial cells (XL-1B for SDM and BL21 for the other three ligations):

Preparations for ELISA

Investigator: Volker M.

Two 96-well plates that were coated with 200µg A20 antibody per well for 48h at 4°C were washed three times with 200µl PBST Buffer and incubated over night at 4°C with 300µl PBST + 0.2 % BSA.

As a preparation 4 liters of PBS buffer were prepared.

Mini-Prep of pSB1C3_gMK_TK30_SDM-PstI_new

Investigator: Stefan

Glycerol stocks were prepared:


Mini-Prep was performed according to standard protocol:

Test digestion:

Components P803 + P804 / µl
DNA 2,5
Buffer 4 1
BSA (10x) 1
PstI 0,3
H2O 5,2
Total volume 10

Gel:
0,5g agarose, 50 ml TAE (1%), 3 µl GELRED, 115 Volt, running time ~50 minutes

Freiburg10 test digestion 101010.jpg

Comment: Vector was cut using PstI in order to verify successful deletion of the PstI restriction site in TK30. As it can be seen above, both vectors are linearized, no fragment was cut out. In case of failed SDM, one additional band at roughly 450 bp was expected. Since this band does not show up, successful deletion is confirmed.

Cloning of lITR_phTERT_beta-globin_mGMK_TK30 into pSB1C3_hgH_rITR

Investigator: Stefan

Comment: In order to test our GOI with another promotor, lITR_phTERT_beta-globin_mGMK_TK30 needs to be cloned upstream of hgH_rITR.


Vector name:
pSB1C3_hgH_rITR (P728)

Insert name:
pSB1C3_lITR_phTERT_beta-globin_mGMK_TK30 (P670)

Digestion:


components volume P670 /µlvolume P728 /µl
DNA 10 7,7
BSA (10x) 2 2
Buffer 4 (10x)2 2
Enzyme EcoI11
Enzyme XbaI-1
Enzyme SpeI1-
H2O46,3
Total volume (e.g. 15,20,25,30 µl) 20 20


Gel:
0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 115 Volt



Freiburg10 cloning 101010.jpg



Gel extraction:
Was performed according to protocol.


T4 Ligation:

ligation name 728 + 670
volume of vector 2,35
volume of insert5,65
T4 ligase buffer (10x)1
T4 ligase 1


Transformation:
Was performed according to standard protocol using BL21 cells.

Cloning of pSB1C3_lITR_phTERT_beta-globin_CFP into pSB1C3_hgH_rITR

Investigator: Anna

Comment:


Insert name:

Vector name:

New vector name:


components volume for inserts (P666 + P728) /µlvolume of vectors P437 + P715 + P719 /µl
DNA 7,7 6,3
BSA (10x) 2 2
Buffer 4 (10x)2 2
Enzyme EcoRI10,7
Enzyme XbaI1-
Enzyme SpeI-0,7
Enzyme BmpI-0,7
H2O6,37,6
Total volume (e.g. 15,20,25,30 µl) 20 20


Gel:
0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 115 Volt



Freiburg10 lITR phTERT beta-globin CFP + pSB1C3 hGH rITR.jpg

  • Gel for Vector: See Cloning above.</li>
    Gel extraction:
    Was performed according to protocol.
    Sample VectorInsert
    DNA concentration [ng/µl]19,6 14,6
    Fragment size [bp] 2600 1800


    T4 Ligation:

    Volume(pSB1C3_hGH_rITR)= 6 µl
    Volume (lITR_phTERT_beta-globin_CFP_hgH_rITR) = 2 µl


    Transformation:
    Was performed according to standard protocol using BL21 cells.

    New ligation approach of Rep52

    Investigator: Kira
    Since ligation with Quickligase (because of one blunt end) revealed no colonies on the plate, I decided to perform ligation with T4 ligase.
    Transformation according to the standard protocol with BL21 cells


    146. labday 11.10.2010

    Colony PCR of Cloning VP2 Fusion and Super constructs into pSB1C3

    Investigator: Achim, Hanna

    Comment: Because yesterday's cloning didn't deliver a good separartion of the expected gel bands. Nevertheless ligation and trafo was performed. In order to immediately find out, whether we received successful results a colony PCR will be performed.
    Two clones were picked from each plat. In addition to that a positive (pAAV_RC) and a negative control (pSB1C3_lITR) was prepared.
    Used primer: 4200 rev and Cap3500 for. Expected fragment size: 885 bp.
    PCR was performed following the standard protocol.

    Freiburg10 1110 testdigestionhanna1label.png
    Freiburg10 1110 testdigestionhanna2label.png


    All samples match the positive control!
    To do: Mini-Prep and sequencing.

    Preparation of SDS-PAGE gel (10%)

    Investigator: Hanna

    Comment: In order to perform a Western Blot of different virus capsids (with and without capsid-motifs), 2 10% SDS polyacrylamid gels were prepared.

    Resolving gel: 15 mL

    • H2O: 5.9 mL
    • Acryl-bisacrylamide mix (30%): 5 mL
    • Tris (1.5 M, pH 8.8): 3.8 mL
    • SDS (10%): 0.15 mL
    • Ammonium persulfate (10%): 0.15 mL
    • TEMED: 0.006 mL


    Stacking gel (5%): 5 mL

    • H2O: 3.4 mL
    • Acryl-bisacrylamide mix (30%): 0.83 mL
    • Tris (1.5 M, pH 6.8): 0.63 mL
    • SDS (10%): 0.05 mL
    • Ammonium persulfate (10%): 0.05 mL
    • TEMED: 0.005 mL

    Colony PCR of p40_VP123_capins

    Investigator: Bea

    Comment: Since the first attempt did not work,and no cells grew on the plate and the same ligation was transformed again into BL-21 and a lot of clones grew on the plate, I decided to perform a colony PCR in order to check several colonies and to inoculate at the same day for a Midi-Prep.

    Protocol:

    • Primer used: O162
    • Primer used: O38
    Freiburg10 ColonyPCR p40vp123 1110.PNG


    The PCR products were loaded on a 1% agarose gel. The results can be seen above in the gel picture:

    Result: We can see two things: The cloning of p40 to VP123 worked quiet well AND the Robust PCR Kit which was used for the first time worked as well.

    Freiburg10 ColonyPCR p40VP123.png


    Cloning of lITR_CMV_betaglobin and lITR_phTERT_betaglobin into pSB1C3_CD

    Investigator: Stefan

    Comment: To produce another GOI for testing in cell culture, the cytosine deaminase needs to be assembled with lITR_promotor_betaglobin. In the next step hgH_rITR needs to be added.


    Vector name:
    pSB1C3_CD clone 1
    pSB1C3_CD clone 2

    Insert name:
    pSB1C3_lITR_CMV_beta-globin (P729)
    pSB1C3_lITR_phTERT_beta-globin (P730)

    Digestion:


    components volume CD clone 1 + 2 /µl volume P729 /µl volume P730 /µl
    DNA 6 146
    BSA (10x) 2 22
    Buffer 4 (10x)2 22
    Enzyme EcoI11 1
    Enzyme XbaI1- -
    Enzyme SpeI-11
    H2O8- 8
    Total volume (e.g. 15,20,25,30 µl) 20 20 20


    Gel:
    0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 115 Volt



    Freiburg10 cloning 111010.jpg


    CD clone 1 yielded to bands around 2500 bp to 3000 bp. Since the vector was cut only using EcoRI and SpeI, it was expected to be linearized, not to be cut into two fragments this size. Therefore, this sample was discarded and cloning was continued using CD clone 2.



    Gel extraction:
    Was performed according to protocol.


    T4 Ligation:

    ligation name 729 + CD cl2730 + CD cl2
    volume of vector 3,672,82
    volume of insert4,335,18
    T4 ligase buffer (10x)11
    T4 ligase 11


    Transformation:
    Was performed according to standard protocol using BL21 cells.

    Seeding HT1080 and A431 for testing different concentrations of ganciclovir by MTT-Assay

    Investigator: Kerstin, Anissa

    • Seeding 4x 96-well plates: 2x HT1080 and 2x A431

    FACS-Analysis

    Investigator: Kerstin

    ...

    Preparation of the ELISA

    Investigator: Volker


    The AAV particle standard that contains 3.6x10^9 viral particles was dissolved in 500µl as described in the protocol of the Progen AAV Titration ELISA and a absorption spectrum was measured. These purified and concentrated viral particles could be used for biophysical measurements, there for the possibility to detect the viral particles by absorption was interesting for us.

    The Spectrum measured in the NanoDrop is the following:

    Freiburg10 Absorption spectrum of the AAV particle standard.jpeg

    Trafo evaluation of Rep52

    Investigator:Kira
    T4 ligation seems to worked out. The plate contained many colonies.

    147. labday 12.10.2010

    Sequencing analysis: pSB1C3_mGMK_TK30 and pSB1C3_CD

    Investigator: Stefan

    Freiburg10 sequencingmGMK TK30 SDM PstI.jpg

    Freiburg10 sequencing CD CFP.jpg


    Test digestion of pSB1C3_CD and pSB1C3_CD_SDM-PstI_new

    Investigator: Stefan


    Comment: Sequencing results revealed that there is CFP rather than CD in P819. In order to verify this and exclude the possibility that the wrong plasmid was sent for sequencing test digestions were performed. Additionally the original vector at which the SDM to remove the PstI was performed was digested as well to verify its insert.

    Components digest 1 / µl digest 2 / µl
    DNA 1 7
    Buffer 4 1 1
    BSA (10x) 1 1
    Enzyme I SpeI 0,3 PstI 0,3
    Enzyme II XbaI 0,3 XbaI 0,3
    H2O 6,4 0,4
    Total volume 10 10

    Comment: Using these digestion approaches, it was expected for CFP to deliver always bands at ~750 bp. For the CD it was expected to show bands at 90 bp, 1200 bp and 2000 bp if the CD still contains the PstI restictiton site, 1300 bp and 2000 bp if it was removed.

    Gel:
    0,5g agarose, 50 ml TAE (1%), 3 µl GELRED, 115 Volt, running time ~50 minutes

    Freiburg10 test digestion 121010 1.jpg

    Comment: As it can be seen, P819 does contain CFP, therefore a mistakenly sequenced plasmid can be excluded. Also it can be seen that P690 contains the CD. Therefore an additonal SDM of P690 to remove the PstI restriction site is necessary.

    qPCR of virus stock: P816/ TKGMk-Standard; R/C: P468 from 5.10. (VLP harvested by Adrian)

    Investigator: Achim

    Protocol for quantitative real-time PCR of virus particles

    Date: 12.10.

    Achim

    Virus Stock: A.F.; P816; TKGMK-Standard; R/C: P468; 5.10; consists of supernatant from pelleted cell fragments.

    Following the Protocol used by (Rohr et al., 2002).

    I digested 5 µl virus dilution with 7,5 µl DNAse I (7,5 units) and 25 µl 50 mM MgCl2 (end concentration 25 mM) in a final volume of 50 µl at 37°C for 30 min.

    è DNAse should be heat inactivated at 65°C for 10 min. I forgot that step. The enzyme should however be inactivated in the initial denaturation step.

    I prepared the following PCR reactions:

    Sample

    1

    2

    3

    4

    5

    6

    7

    8

     

    9

    10

     

    1.1

    1.2

    2.1

    2.2

    S.1

    S.2

    NP1

    NP2

    MM for samples 1 -8

    NH1

    NH2

    PCRmix

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    112.5

    12.5

    12.5

    Primer for

    1

    1

    1

    1

    1

    1

    1

    1

    9

    -

    -

    Primer rev

    1

    1

    1

    1

    1

    1

    1

    1

    9

    -

    -

    Template

    2

    2

    2

    2

    5

    5

    -

    -

    -

    -

    -

    H2O

    8.5

    8.5

    8.5

    8.5

    5.5

    5.5

    10.5

    10.5

    -

    12.5

    12.5

    Total

    25

    25

    25

    25

    25

    25

    25

    25

     

    25

    25

     

    Step

    Time

    Temp

    Initial denaturation

    7’

    95°C

     

     

     

    Denaturation

    10’’

    95°C

    Annealing/Extension

    30’’

    60°C

    Number of Cycles

    45

     

     

    Results:

    Freiburg10 2010-10-12 qPCR Auswertung.PNG

    è Both negative controls containing primers were contaminated with DNA.

    è Negative controls containing only H2O were negative.

    è Values for plasmids/reaction vary; from 1 – 100 for the same virus stock

    è Dilution of the virus solution: 1:10; 2µl PCR sample: 3.2 * 10^5 virus particles/ml

    è Because of the contaminated negative controls and the high deviation, I will repeat the experiment tomorrow to verify the results.

    References:

    Rohr, U., Wulf, M., Stahn, S., Steidl, U., Haas, R., Kronenwett, R., et al. (2002). Fast and reliable titration of recombinant adeno-associated virus type-2 using quantitative real-time PCR. Journal of virological methods, 106(1), 81-8. Retrieved from http://www.ncbi.nlm.nih.gov/pubmed/12367732.

     

    Cloning sr39 into mGMK_TK30

    Investigator: Bea

    Comment: We do not only want to submit the tk30, a mutant version of the thymidine kinase, but as well another mutant protein which is named sr39. SR39 seems to have a better activity than the tk30 without being fused to the guanylate kinase (mgmk), but the sr39 also works quite well as a fusion protein. We ordered one part of the sr39 and we are now subcloning it into the mgmnk_tk30 construct in order to obtain mgmk_sr39.

    Protocol:

    Freiburg10 SR39 into mGMK tk30 12.10.PNG


    The digested fragments were loaded on a 1.2% agarose gel. The results can be seen above in the gel picture: I cut out the small visible band in the right lane, and the upper intensive band of the left lane.

    Result:

    Freiburg10 Digest sr39 and mGMK tk30.png


    After gel extraction has been performed, I ligated the two fragments and transformed BL-21 cells, plated them on cm agar plates and incubated them over night at 37°C.

    Concentration of virus stock for Western Blot analysis

    Investigator: Hanna

    For the first Western Blot try, we investigate whether is is enough to concentrate the virus stock (from cell supernatant) and then to simply load it onto a SDS-PAGE gel and perfom immuno-staining.
    For this purpose 8 mL virus stock (pHelper, pAAV_RC, GOI=YFP) were concentrated via amicon filtration.

    • First, amicon filter was washed with 4 mL PBS.
    • Then 4 mL virus stock was loaded onto the filter and centrifuged at 3000 rpm for 15 minutes.
    • Flow-through was discarded and additional virus stock was loaded, centrifuged at 3000 rpm for 25 minutes.
    • Flow-through was discarded, remaining solution was re-suspended and additional virus stock was added. Amicon filter was centrifuged at 3000 rpm for 50 minutes.
    • Flow-through was discarded. Residual protein solution: 500 µL. Filter was washed with 3 mL PBS, centrifuging 35 minutes two times.
    • 2 x 40 µL protein solution (16x) was taken and mixed with Laemmli buffer and stored over night @ 4°C.


    To do: SDS-PAGE and Western Blot tomorrow.
    Perfomance of another try by harvesting viruses of the cell pellet with RIPA buffer & freeze/ thaw.
    Western Blot of unmodified, and modified capsids (N-terminal fusion and VP1 insertion with CFP ref. mVenus) --> size shift should be detectable.

    Transduction of HT1080 and A431

    Investigator: Kerstin


    Freiburg10 Transductionplan 11.10.2010.jpg

    Freiburg10 Transductionplan1 11.10.2010.jpg

    Freiburg10 Transductionplan2 11.10.2010.jpg

    Freiburg10 Transductionplan3 11.10.2010.jpg

    Freiburg10 Transductionplan4 11.10.2010.jpg

    Mini-Prep and test digestion of several constructs

    Investigator: Stefan

    Glycerol stocks were prepared:

    • B651 = pSB1C3_P40_VP123
    • B652 = pSB1C3_lITR_phTERT_ß-globin_mGMK_TK30_PstI_SDM_hgH_rITR
    • B653 = pSB1C3_lITR_phTERT_ß-globin_mGMK_TK30_PstI_SDM_hgH_rITR
    • B654 = pSB1C3_lITR_CMV_ß-globin_mGMK_TK30_hgH_rITR
    • B655 = pSB1C3_lITR_CMV_ß-globin_mGMK_TK30_hgH_rITR
    • B656 = pSB1C3_CMV_VP123_453_Z34C_HSPG-KO
    • B657 = pSB1C3_CMV_VP123_453_Z34C_HSPG-KO
    • B658 = pSB1C3_CMV_VP123_453_RGD_HSPG-KO
    • B659 = pSB1C3_CMV_VP123_453_RGD_HSPG-KO
    • B660 = pSB1C3_lITR_phTERT_ß-globin_CFP_hgH-rITR
    • B661 = pSB1C3_lITR_phTERT_ß-globin_CFP_hgH-rITR

    Mini-Prep was performed according to standard protocol:

    • P821 = pSB1C3_P40_VP123 c = 327,4 ng/µl
    • P822 = pSB1C3_lITR_phTERT_ß-globin_mGMK_TK30_pSTI_SDM_hgH_rITR c = 342,9 ng/µl
    • P823 = pSB1C3_lITR_phTERT_ß-globin_mGMK_TK30_pSTI_SDM_hgH_rITR c = 324,0 ng/µl
    • P824 = pSB1C3_lITR_CMV_ß-globin_mGMK_TK30_hgH_rITR c = 81,6 ng/µl
    • P825 = pSB1C3_lITR_CMV_ß-globin_mGMK_TK30_hgH_rITR c = 148,4 ng/µl
    • P826 = pSB1C3_CMV_VP123_453_Z34C_HSPG-KO c = 105,8 ng/µl
    • P827 = pSB1C3_CMV_VP123_453_Z34C_HSPG-KO c = 121,1 ng/µl
    • P828 = pSB1C3_CMV_VP123_453_RGD_HSPG-KO c = 188,4 ng/µl
    • P829 = pSB1C3_CMV_VP123_453_RGD_HSPG-KO c = 140,4 ng/µl
    • P830 = pSB1C3_lITR_phTERT_ß-globin_CFP_hgH-rITR c = 197,2 ng/µl
    • P831 = pSB1C3_lITR_phTERT_ß-globin_CFP_hgH-rITR c = 207,3 ng/µl

    Test digestion:

    Components P822 + P823 / µl P824 + P825 / µl P830 + P831 / µl
    DNA 1,5 1,5 2
    Buffer 4 1 1 1
    BSA (10x) 1 1 1
    PstI 0,3 - -
    XbaI 0,3 0,3 0,3
    SpeI - 0,3 0,3
    H2O 5,9 5,9 5,4
    Total volume 10 10 10

    Gel:
    0,5g agarose, 50 ml TAE (1%), 3 µl GELRED, 115 Volt, running time ~50 minutes

    Freiburg10 test digestion 121010 2.jpg

    Comment: P822 and P823 smear a lot, therefore evaluation is difficult. Another test digestion would be reasonable.
    P824 contains hgH_rITR, therefore it will be discarded. P825 looks well and was sent for sequencing.
    P830 and P831 look well and will be sent for sequencing tomorrow.

    Repetiton: Site-directed mutagenesis in pSB1C3_CD construct

    Investigator: Stefan

    Comment: Sequencing revealed that there is no CD in our pSB1C3_CD but rather CFP. So, anonther approach of the SDM needs to be performed.

    Protocol using the QuickChange Lightning Kit from Stratagene:

    Ingredients:

    Ingredients Volume / µl
    10x reaction buffer 2,5
    dNTP0,5
    forward primer: O191 0,56
    reverse primer: O192 0,57
    DNA Template0,5 (1:10 dilution)
    QuikSolution Reagent0,75
    QuikChangeLightning Enzyme0,5
    H2O14,35
    Total volume25



    The following PCR program was used:

    • 95 °C 120 s
    • 95 °C 20 s
    • 60 °C 60 s
    • 68 °C 105 s
    • Goto step 2 repeat 17 times
    • 68 °C 300 s

    Digestion using DpnI:
    To digest methylated and hemi-methylated DNA, 1 µl of DpnI was added and the mixture was incubated for 10 minutes at 37 °C.
    Transformation:
    Trafo was performed according to protocol, but using XL1b cells instead of XL-10 Gold cells.

    148. labday 13.10.2010

    qPCRs of virus stocks

    Investigator: Achim

    Sample:

    Plasmid, Glycerol stock:

    Sample No.

    pSB1C3_001_RC_IRCK_HSPG-ko_P5tataless_RFC10 clone 1

    B561

    1

    pSB1C3_001_RC_IRCK_P5tataless clone1

    P668

    2

    pSB1C3_lITR_CMV_beta-globin_mVenus_rITR clone1

    P378

    3

    pSB1C3_lITR_CMV_mVenus_hGH_rITR clone1

    P377

    4

    pAAV_RC_RepCapIns_SDMKpnI

    P468

    5

                                                                                                   

    Digestion: 37°C, 30 min

     

    1

    2

    3

    4

    5

    MM x6

    Virus solution

    5

    5

    5

    5

    5

     

    DNAseI (7,5 U)

    7,5

    7,5

    7,5

    7,5

    7,5

    45

    MgCl2 50 mM

    5

    5

    5

    5

    5

    30

    H2O

    32.5

    32.5

    32.5

    32.5

    32.5

    195

    Total

    50

    50

    50

    50

    50

    300

     

    PCR reaction:

    Sample

    1

    2

    3

    4

    5

    6

    7

    8

    9

    10

    11

    12

    13

    14

     

    15

    16

     

    1.1

    1.2

    2.1

    2.2

    3.1

    3.2

    4.1

    4.2

    5.1

    5.2

    S.1

    S.2

    NP1

    NP2

    MM for samples 1 -14 (x15)

    NH1

    NH2

    PCRmix

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    12.5

    187,5

    12.5

    12.5

    Primer for 1:10

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    15

    -

    -

    Primer rev 1:10

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    1

    15

    -

    -

    Template

    2

    2

    2

    2

    2

    2

    2

    2

    2

    2

    5

    5

    -

    -

    -

    -

    -

    H2O

    8.5

    8.5

    8.5

    8.5

    8.5

    8.5

    8.5

    8.5

    8.5

    8.5

    5.5

    5.5

    10.5

    10.5

    -

    12.5

    12.5

    Total

    25

    25

    25

    25

    25

    25

    25

    25

    25

    25

    25

    25

    25

    25

     

    25

    25

     

    Results:

    Freiburg10 13 10 auswertung.PNG

    SDS Page of unmodified AAV2 capsids

    Investigator: Hanna

    Comment: Yesterday a 8x concentration of AAV2 supernatant-stock was performed. 10 µL Laemmli-buffer was added to 40 µL AAV stock (8x) and stored over night at 4°C.
    Today a SDS-PAGE of these samples will be performed.

    Samples were incubated for 10 minutes at 95°C for denaturation.

    Loading plan:

    5 µL PageRuler Prestained Protein Ladder 10 µL Sample 15 µL Sample 25 µL Sample


    After running front reached the end of the gel, PAGE was stopped.

    Western Blot:
    Three layers of transfer buffer soaked whatman paper were placed onto the blotter. A polyvinylidene difluoride membrane was activated by methanol (5 seconds) and then incubated for 5 minutes in transfer buffer. Membrane was then placed onto the whatman paper, gel was carefully layed on top. Air bubbles were removed, ensuring elictricity flow. After coverage by 3 further layers of whatman, blotting was performed at 200 mA for 1 hour.

    Blocking:
    In order to minimize nonspecific antibody interactions, membrane was incubated in blocking buffer (TBS (pH 7.5), 5% milk powder) for one hour, shaking.

    Primary antibody incubation:
    A 1:10 dilution of the B1 antibody in TBS + 1% milk was prepared. Membrane was incubated in 50 mL falcon over night at 4°C, rotating.

    Midi-Prep

    Investigator: Chris W.

    Midi-Prep of:


    pSB1C3_CMV_VP123_453_Z34C =P832 =B656
    pSB1C3_CMV_VP123_453_RGD_HSPG-KO =P833 =B658
    pSB1C3_001_RC_IRCK_HSPG-ko_P5tataless_RFC10 clone 1 =P834 =B561
    pSB1C3_001_RC_IRCK_P5tataless clone 1 =P835 =B516
    pSB1C3_lITR_CMV_betaglobin_mVenus_hGH_rITR clone1 =P836 =B200
    pSB1C3_lITR_CMV_betaglobin_mVenus_hGH_rITR clone1 =P837 =B200



    The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

    plasmid-no. P832P833P834P835P836P837
    concentration (ng/µl)3615,8 1504,7 xxxx



    Comment: P834-837 given to sven


    Repetiton: Test digestion of pSB1C3_lITR_phTERT_betaglobin_mGMK_TK30_SDM-PstI_hgH_rITR

    Investigator: Stefan

    Comment: Repetiton of yesterday's test digestion which yielded no clear band at 2000 bp as it was expected.

    Components P822/P823 / µl
    DNA 1,5
    Buffer 4 1
    BSA (10x) 1
    SpeI 0,3
    XbaI 0,3
    H2O 5,9
    Total volume 10


    Gel:
    0,45g agarose, 50 ml TAE (0,9%), 3 µl GELRED, 90 Volt, running time ~110 minutes

    Freiburg10 td131010.jpg

    Comment: This time both samples look well. P822 will be sent for sequencing.

    Sequencing analysis: pSB1C3_leftITR_pCMV_betaglobin_mGMK_TK30_hgH_rITR (P825)

    Investigator: Stefan

    For sequencing the following primers were used_

    • qPCR primer CMV for (O20)
    • GOI primer for (O30)
    • seq. primer TK GMK for (O23)
    • TK30 SDM Pst for (O191)

    Sequencing comfirmed that the pysical sequence fits our theoretical. Next step will be to remove the remaining PstI restriction site within TK30.

    Repetition of cloning of Rep into Rep78

    Investigator: Kira
    Comment: The last 2 approaches to digest Rep78 and to clone failed because Rep78 was almost gone after PCR purification and was not detectable on the gel, even if I used the double amount of DNA. Thus, new over night culture was grown in order to perform the experiment again

    Regarding the activity conditions of the enzymes, digestion was performed in 2 steps.

    Components Rep78
    DNA 3 µl
    BSA (100x) 2 µl
    Buffer no. 3 2,0 µl
    Enzyme SwaI 1,0 µl
    H2O 12 µl
    Total volume 20


    incubation @ 25 C for approx. 2 h
    Dephosphorylation was performed because of the blunt cleavage. PCR phosphorylation followed in order to get rid off the buffer because Buffer 3 is not appropriate for further digestion.

    Components Rep78
    DNA 30 µl
    BSA (100x) 0 µl
    Buffer no. 2 4,5 µl
    Enzyme HindIII 1,0 µl
    H2O 9,5 µl
    Total volume 45


    incubation for 2h at 37C

    Ligation with T4 ligase

    v(insert)=4,4 ul
    v(vector)= 3,6 ul
    T4 buffer= 1 ul
    T4 ligase= 1 ul

    incubation at RT for 45 min

    Transformation according to the standard protocol with BL21

    Midi-Prep

    Investigator: Chris W.

    Midi-Prep of:


    pSB1C3_CMV_VP123_capins =P862 =B474
    pSB1C3_P40_VP123 =P863 =B651



    The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

    plasmid-no. P862P863
    concentration (ng/µl)3310,5 2209,2



  • 149. labday 14.10.2010

    Mini-Prep and test digestion of several constructs

    Investigator: Stefan

    Glycerol stocks were prepared:


    Mini-Prep was performed according to standard protocol:

    Test digestion:

    Components P858 + P859 / µl P860 + P861 / µl
    DNA 7 1,5
    Buffer 4 1 1
    BSA (10x) 1 1
    Enzyme I PstI 0,3 BstXI 0,3
    Enzyme II EcoRI 0,3 XbaI 0,3
    Enzyme III - SpeI 0,3
    H2O 0,4 5
    Total volume 10 10

    Gel:
    0,5g agarose, 50 ml TAE (1%), 3 µl GELRED, 115 Volt, running time ~50 minutes

    Freiburg10 td141010.jpg

    Comment: .

    Continuation of Western Blot of unmodified AAV2 capsids

    Investigator: Hanna

    Comment: Yesterday, SDS PAGE, Western Blot and primary B1 mouse antibody incubation was performed.
    Today, secondary antibody incubation and ECL analysis will be done.


    Because of these dissatisfying results SDS PAGE will be repeated. Instead of performing Western Blot, gel wioll be stained by Coomassie in order to optimize SDS-PAGE conditions.

    Cloning hGH_rITR into (form P728) into pSB1C3_lITR_phTERT_betaglobin_mGMK_TK30_SDM-PstI (P822)

    Investigator Patrick

    Digestions, 1 h 40 minutes, 37 °C:

    Expected results for the 1% agarose gel:


    Freiburg10 1014pat.jpg



    As usual the PSB1C3 bands indicate a higher bp amount than they actually got.
    The gelextraction ...


    ... and following ligation (2 µl Insert, 6 µl vector, 1 µl T4 DNA Ligase, 1 µl T4 DNA Ligase Buffer, 40 minutes, RT) were performed according to the standard protocol. After the transformation (with BL21) the cells were plated and put into the 37°C room.

    Cloning of the ViralBricks 453-empty and 587 empty

    These ViralBricks were not ordered as hybridized oligos, but can be cloned from the Cap-Gene-Synthesis into the ViralBrick MCS.

    components volume of p320 (ViralBrick-BLA) /µl volume of p320 (ViralBrick-BLA) /µl volume of p668 (pSB1C3_RepCap_IRCK) /µl volume of p668 (pSB1C3_RepCap_IRCK) /µl
    DNA 2µl 2µl 7µl 7µl
    BSA (100x) 2.5µl 2.5µl 2.5µl 2.5µl
    Buffer 4 (10x) 2.5µl 2.5µl 2.5µl 2.5µl
    SspI 1µl 0 1µl 0
    SalI 1µl 0 1µl 0
    BamHI 0 1µl 0 1µl
    PvuII 0 1µl 0 1µl
    H2O 16µl 16µl 11µl 11µl
    Total volume 25µl 25µl 25µl 25µl
  • Incubation: 4h


    Sample Marker Sample ViralBrick_BLA 453 cut Sample ViralBrick_BLA 587 cut Sample pSB1C3_001_RepCap_IRCK 453 cut Sample pSB1C3_001_RepCap_IRCK 587 cut
    Lane 7µl 30µl 30µl 30µl 30µl

    Freiburg10 ViralBrick 453 empty and 587 empty.jpg



    SDS PAGE of viral capsids

    Investigator: Hanna
    Comment: In order to optimize SDS PAGE with the viral capsid proteins, I didn't perform Western Blot, but Coomassie staining.

    1.: Preparation of 10% polyacrylamide gel:
    Following standard protocol.

    2.: Preparation of virus samples:
    Two different virus stocks with unmodified capsid were taken. 2 samples were prepared of each: One sample was untreated, the other one was centrifuged in order to sediment cell fragments.
    10 µL Laemmli buffer (5x) was added to 40 µL virus sample and incubated at 95°C for 5 minutes.

    3.: SDS PAGE
    Loading plan:

    10 µL PageRuler Prestained Protein Ladder10 µL Sample 1 (not centrifuged)20 µL Sample 1 (not centrifuged)10 µL Sample 1 (centrifuged)20 µL Sample 1 (centrifuged)10 µL Sample 2 (not centrifuged)20 µL Sample 2 (not centrifuged)10 µL Sample 2 (centrifuged)20 µL Sample 2 (centrifuged)


    Gel was run 1.5 hours at 10 mA.

    4.: Coomassie staining
    Gel was put into coomassie bath, heated in microwave and incubated for 1 hour, shaking.
    In order to remove background coomassie staining, gel was incubated in acetic acid (20%) for 2 hours, shaking.

    SDS PAGE of AAV2 stock - unmodified capsids


    Results revealed that samples ran well (vertically :) ) - 20 µL seems to be too much. Interestingly centrifuging the virus stocks in order to remove cell debris didn't lead to better results.

    To do: Perform Western Blot again - with 10 µL Virus stock, 0.5% instead of just 0.2% TBS-milk and longer washing steps.

    Sequence analysis of super constructs

    Investigator: Hanna
    Comment: We assembled targeting super constructs which specifically bind the EGF receptor with VP2 N-terminal fused ZEGFR:1907 Affibody and can either be purified via a loop inserted His-Tag or visualized via Streptavidin coupled fluorescent proteins.
    Further on these loop motifs were vloned to the "mVenus VP1 insertion".

    Freiburg10 Super BAP.png
    Freiburg10 Super His.png

    Freiburg10 VP1 BAP.png
    Freiburg10 VP1 His.png





























    Sequencing results showed that insertion of these constructs into pSB1C3_CMV worked!

    Next steps: Put sample sinto BioBrick Box.
    Midi-Prep + Transfection.

    Transfection with pCMV, p40, pAAV_RC

    Investigator: Kira
    Comment: Transfection was performed in order to evaluate the promoter activities.

    Yesterday, the cells were seeded in the 6 well plate by Sven. Transformation was performed according to the manufacturer protocol (Qiagen).

    Trafo evaluation of Rep78

    Investigator: Kira
    Transformation was successful. 2 clones will be picked for mini prep tomorrow.

    Picking clones

    Investigator: Kira

    Rep78 and Rep52 were picked (2 clones from each plate), in order to continue with mini prep and PCR amplification.

    Cloning of CD into pSB1C3_hGH_rITR

    Investigator: Stefan

    .


    Vector name:
    pSB1C3_hGH_rITR (P728)

    Insert name:
    pSB1C3_CD_SDM-PstI_III clone 1 (P858)
    pSB1C3_CD_SDM-PstI_III clone 2 (P859)

    Digestion:


    components volume P858 + P859 /µl volume P728 /µl
    DNA 6 8
    BSA (10x) 2 2
    Buffer 4 (10x)2 2
    Enzyme EcoI11
    Enzyme XbaI-1
    Enzyme SpeI1-
    H2O86
    Total volume (e.g. 15,20,25,30 µl) 20 20


    Gel:
    0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 115 Volt



    Freiburg10 141010.jpg


    Gel extraction:
    Was performed according to protocol.


    T4 Ligation:

    ligation name 728 + 858728 + 859
    volume of vector 3,143,14
    volume of insert4,864,86
    T4 ligase buffer (10x)11
    T4 ligase 11


    Transformation:
    Was performed according to standard protocol using BL21 cells.




  • => Go to Labjournal October part 2 (labday 146 - 155 )


    Retrieved from "http://2010.igem.org/Team:Freiburg_Bioware/NoteBook/Labjournal/October"