Team:Freiburg Bioware/NoteBook/Labjournal/August2

From 2010.igem.org

Revision as of 17:09, 18 October 2010 by Timon (Talk | contribs)

=> Back to Notebook overview

Contents

93. labday 18.08.2010

Continuation: pSB1C3_SDM_SspI_Bla14FM clone 5 SDM (P222)

Investigator: Patrick

There is a lawn on the plate although chloramphenicol was added. Some clones were picked and a new agar plate inoculated to hopefully receive some 'pickable' clones.

Additionally a new SDM was performed: PCR program:

  • 95°C 2 min (1x)
  • 95°C 20s, 60°C 10 s, 68°C 30 s (30s/kb) (18x)
  • 68°C 5 minutes
Ingredients Volume
10x reaction buffer 2,5
DNA template ( about 10 ng) 1 µl diluted P222
forward primer: 0,58 µl O108 (pSB1C3 PvuII rev)
reverse primer: 0,59 µl O109 (pSB1C3 PvuII for)
DMSO (2%) 0,5
dNTP Mix from the kit 0,5 µl
QuickSolution Reagent0,75 µl
Quickchange Lightning Enzyme (1.25U)0,5 µl
H2O 18,08 µl
Total volume25 µl


All further steps including the transformation were performed according to the standard protocol. This time 2 agar plates were inoculated. One of them with the resuspended pellet and the other one with a 1:100 dilution of the resuspended pellet.

Mini Preps pEGFP_C1,pSB1C3_Rep40,pSB1C3_Rep78,pMA_T_Affibody,pSB1C3_SspIdel_BLA clone 2+3,pSB1C3_AAP, pSB1C3_lITR_CMV_betaglobin_mVenus_hGH_rITR,pSB1C3_lITR_CMV_mVenus_hGH_rITR,pSK_CD_SDMPstI

Investigator: Jessica
Preps and test digestions were made:
pSK_CD_SDMPstI

  • Given Plasmid-Number: P248; DNA concentration: 302,7 ng/µL ;
  • Given Plasmid-Number: P249; DNA concentration: 267,0 ng/µL ;
  • P248, P249 and P223 as control digested with PstI --> no satisfying result,control was not cut but samples two times... sent for sequencing with primer: GATC_std_T7minus1


pSB1C3_Rep40

  • Given Plasmid-Number: P231 (clone3); DNA concentration: 234,00 ng/µL
  • Given Plasmid-Number: P232 (clone2); DNA concentration: 234,96 ng/µL
  • Given Plasmid-Number: P233 (clone1); DNA concentration: 237,12 ng/µL

pSB1C3_Rep78

  • Given Plasmid-Number: P234 (clone2); DNA concentration: 277,56 ng/µL
  • Given Plasmid-Number: P235 (clone1); DNA concentration: 294,19 ng/µL
  • Given Plasmid-Number: P236 (clone3); DNA concentration: 378,87 ng/µL

pSB1C3_AAP

  • Given Plasmid-Number: P239 (clone1); DNA concentration: 219,82 ng/µL
  • Given Plasmid-Number: P240 (clone2); DNA concentration: 220,45 ng/µL
  • Given Plasmid-Number: P241 (clone3); DNA concentration: 209,57 ng/µL

has to be edited Freiburg10 Kopfkratzen.gif

@Jessica: What are these plasmid numbers?? (Bea)

  • Given Plasmid-Number: P230; DNA concentration: 367,36 ng/µL ;
  • Given Plasmid-Number: P242; DNA concentration: 202,09 ng/µL ;
  • Given Plasmid-Number: P243; DNA concentration: 369,34 ng/µL ;
  • Given Plasmid-Number: P245; DNA concentration: 207,12 ng/µL ;
  • Given Plasmid-Number: P246; DNA concentration: 198,35 ng/µL ;
  • Given Plasmid-Number: P247; DNA concentration: 212,22 ng/µL ;

Test digestion

  • buffer used: 4 ; Restriction-enzymes used: Enzyme XbaI ; Enzyme SpeI
  • Plasmid

    Components P231-233 Volume/µL P234 Volume/µL P235 Volume/µL 236 Volume/µL P239-242 Volume/µL
    DNA 4 3.5 3 2.5 4
    BSA (10x) 2 2 2 2 2
    Buffer 4 (10x) 2 2 2 2 2
    SpeI 0.5 0.5 0.5 0.5 0.5
    XbaI 0.5 0.5 0.5 0.5 0.5
    H2O 11 11,5 12 12.5 11
    Total volume 20 20 20 20 20


    Comment: Test digestion of P231-233 and P239-242 contained equal volumes of ingredients. Therefore the charts were simplyfied.

    Freiburg10 test digestion Rep40,78,AAP.png

    Comment: P231 and P239 will be sent for sequenzing tomorrow. We picked for additional clones of Rep78 for Mini-Prep and test digestion tomorrow.

Continuation of Repetition: Biobrick production of Rep 68 (17.08.2010)

Investigator: Christian L. , Stefan


Aim of the experiment: We want to produce biobricks from Rep 68.

  • Vector: name: pSB1C3_CFP P51.1
  • Insert: name: Rep68_SDM_PstI clone 1 P224
  • buffer used: 4
  • Restriction-enzymes used:
    • XbaI
    • SpeI
  • DNA concentration (P51.1): 132,1 ng/µl
  • DNA concentration (P224): 350.29 ng/µl


Digestion of plasmid backbone and PCR product:

components volume of pSB1C3_CFP /µl volume of Rep68_SDM_PstI clone 1 /µl
DNA 10 29
BSA (10x) 2 4
Buffer 4 (10x)2 4
SpeI 1 1
XbaI 1 1
H2O4 1
Total volume 2040


Incubation at 37°C, 2 h
Dephoshorylation of Vector pSB1C3_CFP after digestion:

  • add 2 µl of 10x Antarctic Phopshatase Reaction Buffer to DNA cut with XbaI and SpeI
  • add 1 µl of Antarctic Phosphatase and mix
  • incubate for 60 minutes at 37°C


Gelextration of pSB1C3
Gelextration of pSB1C3 was performed according to standard protocol
0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , at 115 Volt, running time:45

Freiburg10 pSB1C3 dephos.png


PCR Purification Purification of Rep68 was performed according to the standard protocol
Concentration measured: 16,4 ng/µl
Ligation For the ligation 1µl T4 buffer (10x) and 1µl T4 ligase were used.

vector /µl insert /µl
pSB1C3 + Rep68 3,9 4,1


Incubation at room temperature for 45 minutes.
Transformation:
The transformation was done following the standard protocol using XL1b cells.

Transfection of AAV293 cells

Investigator: Adrian, Kerstin

  • 2x106 cells were seeded (instead of 3x106) --> hopefully better virus-production
  • used plasmids:
    • P50 c= 429 ng/µl (RC)
    • P64 c= 500 ng/µl (pHelper)
    • P229 c= 162 ng/µl (GOI=YFP)
    • P228 c= 540 ng/µl (GOI=eGFP)
    • P158a c= 1800ng/µl (RC mutant)
    • P158a c= 1770ng/µl (RC mutant)


  • 1. plate: Lipo-Transfection
  • 2. plate: Lipo-Transfection


  • 3. plate: 3,3 µg (RC), 3,3 µg (pHelper), 3,3 µg (YFP)
  • 4. plate: 10 µg (RC), 10 µg (pHelper), 3,3 µg (YFP)
  • 5. plate: 10 µg (RC mutant P158a), 10 µg (pHelper), 3,3 µg (YFP)
  • 6. plate: 10 µg (RC mutant P158b), 10 µg (pHelper), 3,3 µg (YFP)
  • 7. plate: 3,3 µg (RC mutant P158a), 3,3 µg (pHelper), 3,3 µg (YFP)
  • 8. plate: 3,3 µg (RC mutant P158b), 3,3 µg (pHelper), 3,3 µg (YFP)
  • 9. plate: 10 µg (RC), 10 µg (pHelper), 3,3 µg (eGFP)
  • 10. plate: 10 µg (RC), 10 µg (pHelper), 10 µg (eGFP)
  • 11. plate: 10 µg (RC), 10 µg (pHelper), 20 µg (eGFP)
  • 12. plate: 10 µg (RC), 10 µg (pHelper), 40 µg (eGFP)

Seeding Ht1080

Investigators: Adrian, Kerstin

Cloning of pMA_T_affibody and pSB1C3_CFP

Comment: pMA_T_affibody (p237) from Retrafo and pSB1C3_CFP (p51.5) were digested with EcoRI and PstI.

Investigator: Anna

Vector:

  • pSB1C3_CFP (p51.1): c= 132,1 ng/µl

Insert:

  • pMA_T_affibody (p237): c= 233,96 ng/µl


components Vector p51.1Insert p237
DNA 9 8
BSA (10x) 2 2
Buffer 4 (10x)2 2
Enzyme EcoRI 1 1
Enzyme PstI 1 1
H2O5 6
Total volume 20 20


  • Gelextraction of pSB1C3_RFC25_CFP:

0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , at 120 Volt, running time:55
4µl loading dye (6x) for the sample, Marker: GeneRuler ladder mix (Fermentas)



Freiburg10 pSB1C3 affibody.jpg


  • c(pSB1C3)= 5,4 ng/µl
  • c(affibody)= 5,6 ng/µl


  • Ligation of PCR products and vector:

For the Ligation 1µl T4 buffer (2x) and 1µl T4 ligase were used. Incubation time: 30 min

vector /µl insert /µl
pSB1C3 + affibody 5,91 2,09


  • Transformation:

The transformation was done following the standard protocol using XL1 blue cells.

Result: Clones of pSB1C3_affibody will be picked tomorrow.

94. labday 19.08.2010

Continuation: pSB1C3_SDM_SspI_Bla14FM clone 5 SDM (P222)

Investigator: Patrick
Again there was a bacterial lawn on the agar plate. Therefore some clones from the overgrown agar plated were picked and diluted. The 1:10^4, 1:10^5, 1:10^6 dilution each were put onto an agar plate (37°C, over night). Additionally a transformation with XL1B cells from the remaining SDM DNA sample was performed and diluted, too. The 1:10^4 and the 1:10^6 dilution were plated. Hopefully there will be some 'pickable' clones tomorrow.


Freiburg10 Kopfkratzen.gif

Cloning of pSB1C3_CFP and middlelinker

Investigator: Jessica

  • buffer used: 4; Restriction-enzymes used: Enzyme 1: AgeI ; Enzyme 2: PstI ; Enzyme3: NgoMIV
  • Plasmids:
    • pSB1C3_CFP P51.2
    • pGA14_middle linker P65



Components Mastermix P51.2/µL P65/µL
DNA - 9,9 10,8
BSA (10x) -2 2
Buffer 4 (10x) - 2 2
Enzyme 1 AgeI - 1 -
Enzyme 2 PstI - 1 1
Enzyme 3 NgoMIV - - 1
H2O - 4,1 3,2
Total volume - 20 20


  • Incubation: 90 minutes

Agarosegel
0.5 g Agarose, 50 ml TAE (1 %), 3 µL GELRED, at 115 Volt, running time: 45 minutes



Freiburg10 gel cut n terminus.jpg
























concentrations measured via NanoDrop:

  • SB1C3_CFP: 5,0 ng/µl
  • middle linker:1,7 ng/µl


T4 Ligation
Volume insert: 1,24 µl
Volume vector: 6,76 µl

Trafo was prepared with XL1blue

Test digestion of pSB1C3_Rep78

Investigator: Chris L., Stefan
Preps and test digestions were made:
pSB1C3_Rep78

  • Given Plasmid-Number: P252 (clone4); DNA concentration: 352,47 ng/µL
  • Given Plasmid-Number: P253 (clone5); DNA concentration: 408,23 ng/µL
  • Given Plasmid-Number: P254 (clone6); DNA concentration: 349,18 ng/µL
  • Given Plasmid-Number: P255 (clone7); DNA concentration: 320,25 ng/µL

Test digestion

  • buffer used: 4 ; Restriction-enzymes used: Enzyme XbaI ; Enzyme SpeI
  • Plasmid

    Components P252 Volume/µL P253 Volume/µL P254 Volume/µL 255 Volume/µL
    DNA 2.5 2 2.5 3
    BSA (10x) 2 2 2 2
    Buffer 4 (10x) 2 2 2 2
    SpeI 0.5 0.5 0.5 0.5
    XbaI 0.5 0.5 0.5 0.5
    H2O 12.5 13 12.5 12
    Total volume 20 20 20 20


    Incubation time: 1 h; Incubation temperature: 37°
    0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , running time:5 minutes at 90 Volt and 40 minutes at 115 Volt
    4µl loading dye (6x) for the sample, Marker: GeneRuler ladder mix (Fermentas)

    PSB1C3_Rep78_18.08.png

Sent for sequencing

Investigator: Chris L., Stefan

pSB1C3_Rep52 clone3 (P202) sent for sequencing with O162 (VF2). pSB1C3_Rep40 clone3 (P231), pSB1C3_AAP clone1 (P239), pSB1C3_Rep78 clone4 (P252) and pSB1C3_Rep78 clone7 (255) sent for sequencing with O162 (VF2) and O51 (VR2) pAAV_RC_ins-rep clone1 (P250) and pAAV_RC_ins-rep clone2 (P251) sent for sequencing with O19 (VP1 primer for pKEX reverse)

Test Digestion of P242, P243, P245, P246, P247

Investigator: Achim

P242: pSB1C3_lITR_CMV_betaglobin_mVenus_hGH_rITR clone1

P243: pSB1C3_lITR_CMV_betaglobin_mVenus_hGH_rITR clone2

P245: pSB1C3_lITR_CMV_mVenus_hGH_rITR clone1

P246: pSB1C3_lITR_CMV_mVenus_hGH_rITR clone2

P247: pSB1C3_lITR_CMV_mVenus_hGH_rITR clone3




(Left picture: Test digestion from 18.8., right picture: Repetition of test digestion from 19.8.)

Fragments sizes:

  • P242/243: 1400/3400
  • P245/P246/P247: 1400/2900

Bands are diffuse and size estimation is difficult because of strange marker behaviour, but at least the second digestion shows two distinct bands which look like they have the correct sizes. P242 and P245 were sent for sequencing.

Test digestion of pAAV_RC-ins-rep

Investigator: Chris L., Stefan
Preps and test digestions were made:
pAAV_RC-ins-rep

  • Given Plasmid-Number: P250 (clone1); DNA concentration: 467,5 /µL
  • Given Plasmid-Number: P251 (clone2); DNA concentration: 108,4 ng/µL

Test digestion

  • buffer used: 3 ; Restriction-enzymes used: Enzyme SwaI ; Enzyme BstEII
  • Plasmid

    Components P250 Volume/µL P251 Volume/µL
    DNA 1,7 7.3
    BSA (10x) 1 1
    Buffer 3 (10x) 1 1
    SpeI 0.5 0.5
    XbaI 0.5 0.5
    H2O 5.3 -
    Total volume 10 10.3


    Incubation time with SwaI: 60 minutes; Incubation temperature: 25° Incubation time with BstEII: 75 minutes; Incubation temperature: 60°
    0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , running time: 45 minutes at 115 Volt
    4µl loading dye (6x) for the sample, Marker: GeneRuler ladder mix (Fermentas)

Midiprep of dsAAV_CMV_EGFP and pAAV_iGEM_mVenus_YF

Investigators: Chris W.

Comment: Midi-Preps of dsAAV_CMV_EGFP (p31, B24) and pAAV_iGEM_mVenus_YFP (p39, B34)

The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

plasmid-no. p31p39
concentration (ng/µl)2420,46 & 2586,64 1148,07 & 978,99



Harvest viral particles and Transduction of HT1080 cells

Investigators: Adrian, Kerstin


  • Transfectionplan (16.08.2010)
    Plate amount of cells
    1100 000
    2200 000
    3400 000
    4500 000
    5800 000
    61 000 000
    71 200 000
    81 500 000
    91 750 000
    101 750 000 not sure

    The cells were transfected with 40µg YFP, 3,3µg Rep/Cap and 3,3µg pHelper.

  • Transduction of HT1080

    Comments: We want to find out, if the efficiency of virus production can be influenced by the amount of transfected cells.



    Plate 1 YFP: 200.000 cells per well

    1 2 3
    A control, no cells 165µl virus (1) 165µl virus (2)
    B control, no virus 165µl virus (1) 165µl virus (2)

    Plate 2 YFP: 200.000 cells per well

    1 2 3
    A control, no cells 165µl virus (3) 165µl virus (4)
    B control, no virus 165µl virus (3) 165µl virus (4)

    Plate 3 YFP: 200.000 cells per well

    1 2 3
    A control, no cells 165µl virus (5) 165µl virus (6)
    B control, no virus 165µl virus (5) 165µl virus (6)

    Plate 4 YFP: 200.000 cells per well

    1 2 3
    A control, no cells 165µl virus (7) 165µl virus (8)
    B control, no virus 165µl virus (7) 165µl virus (8)

    Plate 5 YFP: 200.000 cells per well

    1 2 3
    A control, no cells 165µl virus (9) 165µl virus (10)
    B control, no virus 165µl virus (9) 165µl virus (10)

    New ladder mix and testing

    Investigator: Jessica
    new Generuler ladder mix from Fermentas arrived
    one tube (containing 100µl solution) was prepared with 100µl loading dye and 400 µl miliporewater

    two test-gels were prepared:

    • 1% TAE agarose gel with samples of
      • 0,5 µl
      • 1,0 µl
      • 2,0 µl
      • 3,0 µl
      • 4,0 µl
      • 5,0 µl
      • 6,0 µl
      • 7,0 µl
      • 8,0 µl
      • 9,0 µl
      • 10,0 µl
      • sample P250
    Freiburg10 gel mix.jpg
























    • 1% TAE agarose gel containing 20% H2O with samples of ( 20% H2O was an idea I have read in a journal but it doesn't seem like a good idea
      • 0,5 µl
      • 1,0 µl
      • 2,0 µl
      • 3,0 µl
      • 4,0 µl
      • 5,0 µl
      • 6,0 µl
      • 7,0 µl
      • 8,0 µl
      • 9,0 µl
      • 10,0 µl
      • sample P251
    Freiburg10 gel mix 20% wasser.jpg
























    Comments: an example of these laddervolumes is patches at the bench (right up)


    SDM of CD NgoMIV

    Investigator:Kira

    Comment: Lightning kit was used for quickchange reaction

    component Volume/µl
    DNA: (1:100) 3,3
    10x reaction buffer: 2,5
    primer forward NgoMIV (1:10) 0,55
    primer reverse NgoMIV (1:10) 0,55
    dNTP 0,5
    DMSO 0
    QuickSolution Reagent 0,75
    H2O 16,35
    Lightning Polymerase 0,5


    PCR

    segment cycles temperature time
    1 1 95 2min
    2 18 95 20sec
    60 10 sec
    68 2 min15 sec
    3 68 5 min


    sample was digested with 1 ul DpnI for 10 min at 37°C

    Transformation was performed according to the standard protocol.

    Picking clones of pSB1C3_affibody and pSB1C3_Rep68

    Investigator: Anna

    Plasmid Resistance Bacterial strain
    pSB1C3_affibody° ChloramphenicolXL1 blue
    pSB1C3_Rep68°° ChloramphenicolXL1 blue

    °: 2 clones °°: 3 clones each

    Clones were inoculated in 10 mL DYT medium containing 10 µL of antibiotics and were put in 37°C room on shaker.

    95. labday 20.08.2010

    Sequence analysis of sequencing reads prepared yesterday (19.08.2010)

    Investigator: Bea

    Mistake.png


    GENERAL COMMENT: pSB1C3 {Rep 52 and Rep 78{} were sent for sequencing BUT they cannot be used for subcloning the ordered rep protein because in the produced BioBricks the restriction enzyme needed for subcloning (SwaI) is NOT present in the BioBricks pSB1C3_Rep52 and rep78.


    Comments: Sequence analysis of pAAV_RC containing the subcloned "rep" (ordered)

    • Primer used: VP1 primer fro pKex
    • Plasmid sequenced: P250
    • Sequence sample: CL-9
    • Stored in folder:


    Results:


    Next steps: xy

    Comments: Sequence analysis of pAAV_RC containing the subcloned "rep" (ordered)

    • Primer used: VP1 primer fro pKex
    • Plasmid sequenced: P251
    • Sequence sample: CL-10
    • Stored in folder:


    Results:


    Next steps: xy

    Comments: Sequence analysis of pSB1C3_Rep40

    • Primer used: VR-2
    • Plasmid sequenced: P231
    • Sequence sample: CL-2
    • Stored in folder: DKFZ Rep40ex


    Results:

    Sequence read is good (prefix is ok) but there was found a mutation in Rep52 protein: G2886A (nucleotides) --> V337I.


    Next steps: xy

    Comments: Sequence analysis of pSB1C3_AAP

    • Primer used: VR-2
    • Plasmid sequenced: P239
    • Sequence sample: CL-3
    • Stored in folder: DKFZ AAP


    Results:

    xy


    Next steps: xy

    top of page

    Continuation: pSB1C3_SDM_SspI_Bla14FM clone 5 SDM (P222)

    Investigator: Patrick

    The XL1B transformation didnt work or was too much diluted because there were no clones on the plates. The dilution steps of the transformed XL10-Gold cells worked quite well. Now there are 'pickable' clones.
    Freiburg10 Kopfkratzen.gif
    top of page

    Subcloning cap from pMA_RepCap into pAAV_RC which contains four mutations and the synthesized Rep part

    Investigator: Patrick

    pAAV_RC_ins-rep clone 1 (P250) and pMA_RepCap Vector_SDM_InsPvuII clone 1 (P211) were digested with PspLI and BspMI according to the standard protocol (Subcloning_cap_into_pAAV_RC).

    Expected size of the bands:

    • Insert: 920 bp (P211)
    • Vector: 6414 bp (P250)

    The gelextraction yielded the following DNA concentrations:

    • P 211 : 2,45 ng/µl
    • P 250 : 11,15 ng/µl


    Freiburg10 Digestion of pMA RC and pAAV RC 20 08 2010.jpg
    The marked bands were cut out and the DNA was extracted. The ligation was performed accodring to the standard prtocol with a total volume of 10 µl: 2,67 µl vector backbone(P250), 5,33 µl Insert following a transformation according to the standard protocol with XL1B cells.

    Mini-Preps of pSB1C3_Rep68_ex and pSB1C3_ZEGFR:1907

    Investigator: Chris L.,Stefan

      Glycerol stocks were prepared:
    • B218 = pSB1C3_Rep68_ex clone1
    • B219 = pSB1C3_Rep68_ex clone2
    • B220 = pSB1C3_Rep68_ex clone3

    • B221 = pSB1C3_ZEGFR:1907 clone 1
    • B222 = pSB1C3_ZEGFR:1907 clone 2

    • Mini-Prep following the standard protocol

    • B218 = pSB1C3_Rep68_ex clone1 c=286.72 ng/µl
    • B219 = pSB1C3_Rep68_ex clone2 c=277.06 ng/µl
    • B220 = pSB1C3_Rep68_ex clone3 c=298.18 ng/µl


    • B221 = pSB1C3_ZEGFR:1907 clone 1 c=174.20 ng/µl
    • B222 = pSB1C3_ZEGFR:1907 clone 2 c=162.48 ng/µl

    Test digestion

    • buffer used: 4 ; Restriction-enzymes used: XbaI ; SpeI ; EcoRI ; PstI

    • Components P264 Volume/µL P265 Volume/µL P266 Volume/µL P267 Volume/µL P268 Volume/µL
      DNA (800 ng) 2.8 2.9 2.7 4.6 4.9
      BSA (10x) 1 1 1 1 1
      Buffer 4 (10x) 1 1 1 1 1
      SpeI 0.5 0.5 0.5 - -
      XbaI 0.5 0.5 0.5 - -
      PstI - - - 0.5 0.5
      EcoRI - - - 0.5 0.5
      H2O 4.2 4.1 4.3 2.4 2.1
      Total volume 10 10 10 10 10


      Incubation time: 1 h; Incubation temperature: 37°
      0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , running time:5 minutes at 90 Volt and 40 minutes at 115 Volt
      4µl loading dye (6x) for the sample, Marker: GeneRuler ladder mix (Fermentas)

      Freiburg10 pSB1C3 Rep68 ex and pSB1C3 ZEGFR1907.png

      Comment:pSB1C3_Rep68_ex clone 3 (P266) sent for sequencing with O162 (VF2) and O51 (VR2). pSB1C3_ZEGFR:1907 clone 1 (P267) sent for sequencing with O51 (VR2).

    Hybridisation of the oligos for NLS and cloning NLS into pSB1C3

    Investigator: Anissa

    • Hybridisation: program: Origami 1
      Hybridisation was peformed according the standard protocol

    • Digestion of pSB1C3_CFP
      components Vector /µl
      DNA 6,62
      BSA (10X) 1,5
      Buffer 4 1,5
      Enzyme EcoRI1
      Enzyme PstI1
      H2O3,38
      Endvolume15

    • Gel:After digestion, the sample was loaded on a 1% agarose-gel.


    • Gelextraction: After the gel run, the vector backbone pSB1C3 was cut and purified according to the standard protocol

    • Ligation: the original concentration of the hybridisation was 209,7 ng/µl, for the ligation a 1:10 dilution was made
      components Volume /µl Concentration/ ng/µl
      Insert (NLS) 6,79 2,097
      Vector (pSB1C3_cut) 1,21 8,3

    • Transformation: Trafo into XL1 blue was performed according the standard protocol

    Seeding HT1080 cells

    Investigator: Kerstin, Adrian

    • Seeding HT1080 cells for transduction with viral stocks from 18.08.
    • We harvest four T75 flask (two of them were used three times (3 passages)) and seed them into eight 6er dishes (200.000 cells per well)

    PCR and ligation for biobrick-production of pCerulean

    Investigator: Christian L. , Stefan

    DNA template: pEGFP_C1 (P230) C=367,4 ng/µl

    PCR: (was performed following the standard protocol)

    Ingredients Volume / µl
    5X Phusion HF buffer 10
    10 mM dNTP mix1
    forward primer: O163 (pEGFP-C1_rev) 2.5
    reverse primer: O164 (pEGFP-C1_for) 2.5
    DNA Template(1:1000) 3 µl
    DMSO (2%) 1
    Phusion Polymerase0,5
    H2O29.5
    Total volume50


    PCR program:

    PCR Programtemperature/ °Ctime/ sec.
    198 60
    298 15
    8x59 25
    3 72 60
    4 98 15
    17x66 25
    572 60
    1x72 5
    Hold4 -


    Comments: Errors in table, please correct!!! (TB)


    Gelextraction of PCR product
    Gelextraction was performed according to the standard protocol of the PCR product.
    Freiburg10 pEGFP C1.jpg

    Comment: 0,4 g Agarose,50 ml TAE (0,8%), 3 µl GELRED , at 115 Volt, running time: 45 minutes


    Digestion of PCR product and vector:

    components PCR product /µl vector /µl
    DNA 10 29
    BSA (10x) 2 2
    Buffer 4 (10x) 2 2
    Enzyme EcoRI 1 1
    Enzyme PstI 1 1
    H2O 4 5
    Total volume (e.g. 15,20,25,30 µl) 20 40


    Purification of the PCR product with PCR purification was made according to the standard protocol.
    Gelextraction of CFP
    Gelextraction was performed according to the standard protocol.
    Freiburg10 pSB1C3 CFP.png>

    Comment: 0.5 g Agarose,50 ml TAE (1%), 3 µl GELRED , at 115 Volt, running time: 45 minutes



    Ligation
    The Ligation was performed as following:

    • Vector Volume: 4,1 µl
    • Insert Volume: 3,9 µl


    • 1µl T4-Ligase buffer (10x)
    • 8µl (Vector + Insert) mix
    • 1µl T4-Ligase


    Incubation for 45 minutes at room temperature
    Transformation:
    performed according to the standard protocol (XL1B). The cells were plated on a agar plate with Kanamycin.

    Biobrick production of VP1_up

    Investigator: Achim

    DNA template: pKex_VP1 (P27) C=99,3 ng/µl

    PCR: (was performed following the standard protocol)

    Ingredients Volume / µl
    5X Phusion HF buffer 10
    10 mM dNTP mix1
    forward primer: O89 (Präfix_VP1_ex_RFC25_for) 2.5
    reverse primer: O167 (pEGFP-C1_for) 2.5
    DNA Template(1:100) 1 µl
    DMSO (2%) -
    Phusion Polymerase0,5
    H2O
    Total volume50


    PCR program:

    PCR Programtemperature/ °Ctime/ sec.
    198 60
    298 15
    8x60 25
    3 72 15
    4 98 15
    17x66 25
    1x72 15
    Hold4 -




    Digestion of PCR product and vector:


    components PCR product /µl vector /µl
    DNA 20 5,2
    BSA (10x) 3 2
    Buffer 4 (10x) 3 2
    Enzyme NgOMIV 1 1
    Enzyme SpeI 1 1
    H2O 2 8,8
    Total volume (e.g. 15,20,25,30 µl) 30 20


    Ligation with T4-Ligase and transformation with XL1B were carried out. Clones have to be picked tomorrow.

    BioBrick assembly for pSB1C3_Affibody_Linker and pSB1C3_YFP_His-Tag

    Investigators: Volker


    The aim of this experiment is to assemble the affibodies with the the five linkers and the YFP with the His-Tag. All cloning is done according to RFC 25 and will be used to test the affibody if it really binds the EGF-receptor, for the N-terminal fusions and to supply it to other groups in the registry.

    This experiment went wrong on Saturday 21.08. and was repeated on Sunday 22.08. and gave the following results. Results from the first experiment are not shown but can be senn in the written Labjournal.

    Digestion

    The following digestions were performed:

    components Affibody Affibody Affibody Short Linker Middle Linker Long Linker SEG Linker GSAT Linker YFP His-Tag
    DNA 8.6 µl 8.6 µl 8.6 µl 7.7 µl 8.2 µl 8.0 µl 8.1 µl 8.4 µl 5.4 µl 14 µl
    BSA (100x) 2µl 2µl 2µl 0µl 0µl 0µl 0µl 0µl 2µl 0µl
    Buffer (10x) 2µl 2µl 2µl 2µl 2µl 2µl 2µl 2µl 2µl 2µl
    Enzyme 1 (1µl each) PstI PstI PstI PstI PstI PstI PstI PstI EcoRI EcoRI
    Enzyme 2 (1µl each) AgeI AgeI AgeI NgoMIV NgoMIV NgoMIV NgoMIV NgoMIV AgeI NgoMIV
    H2O 5.4 µl 5.4 µl 5.4 µl 8.3 µl 7.8 µl 8.0 µl 7.9 µl 7.6 µl 8.6 µl 2.0 µl
    Total volume 20µl 20µl 20µl 20µl 20µl 20µl 20µl 20µl 20µl 20µl

    Incubation: 2 h

    Preparative Agarose-Gel


    1 g Agarose, 100 ml TAE (1%), 6 GELRED (3-6µl), at 120Volt, running time: 130 minutes

    Lane Sample Sample/µl] Loading dye (5x/6x)/µl Expected size 1 (Geneious) Expected size 2 (Geneious)
    1 Affibody 20 µl 4 µl bp bp
    2 Affibody 20 µl 4 µl bp bp
    3 Affibody 20 µl 4 µl bp bp
    10 His-Tag 20 µl 4 µl bp bp



    2 g Agarose, 100 ml TAE (2%), 6 GELRED (3-6µl), at 120 Volt, running time: 130 minutes

    Lane Sample Sample/µl] Loading dye (5x/6x)/µl
    4 Short Linker 20 µl 4 µl
    5 Medium Linker 20 µl 4 µl
    6 Long Linker 20 µl 4 µl
    7 SEG Linker 20 µl 4 µl
    8 GSAT Linker 20 µl 4 µl
    9 YFP 20 µl 4 µl


    Gel extraction

    Sample Weight Volume Concentration
    Affibody 0.4g 1200µl 29.78
    Affibody 0.44g 1320µl 24.86
    Short-Linker 0.27 g 810µl 0.22
    Middle-Linker 0.38 g 1140µl 3.67
    Long-Linker 0.35 g 1050µl 1.31
    SEG-Linker 0.34 g 1020µl 2.13
    GSAT-Linker 0.22 g 660µl 3.58



    Ligation

    Sample Insert V(Insert) Vector V(Vector)
    pSB1C3_Affibody_Short-Linker Affibody 1.06µl Short-Linker 6.94µl
    pSB1C3_Affibody_Middle-Linker Affibody 5.25µl Middle-Linker 2.75µl
    pSB1C3_Affibody_Long-Linker Affibody 2.93µl Long-Linker 5.07µl
    pSB1C3_Affibody_SEG-Linker Affibody 2.46µl SEG-Linker 5.54µl
    pSB1C3_Affibody_GSAT-Linker Affibody 3.41µl GSAT-Linker 4.59µl


    96. labday 21.08.2010

    Transfection of AAV293, Harvest viral particles, Transduction of HT1080 and Fluorescent microscopy

    Investigators: Adrian, Kerstin

    The Motivation
    Measure the Transduction efficiency from 19.8

    The Motivation
    Transfection of AAV293 cells from 19.8 (ten 10cm2 dishes with 2.000.000 cells each) with original standard protocoll!!! We want to try different 2xHBS Buffers (pH) and their influence on transfection efficiency!

    The Plan

    Requiered goods: 0,3 M CaCl2 , 2x HBS-Buffer , autoclaved millipore water, falcons, eppis
    Working steps:

    1. Remove the three plasmids to be co-transfected (the recombinant pAAV expression plasmid or control plasmid, pAAV-RC, and pHelper) from storage at –20°C.
    2. Pipet 10 µg of each of the three plasmid DNA solutions into an eppi.
    3. Add 1ml of 0.3 M CaCl2 and mix gently
    4. Pipet 1ml of 2 × HBS into a 15-ml falcon.
    5. pipet the DNA/CaCl2 solution dropwise into the falcon (use the Pipetus).
    6. Apply the DNA/CaCl2/HBS suspension to the plate of cells in a dropwise fashion, swirling gently to distribute the DNA suspension evenly in the medium.
    7. Return the tissue culture plate to the 37°C room for 6 hours.
    8. At the end of the incubation period, remove the medium from the plate and wash cells with warm PBS, replace it with 10 ml of fresh DMEM growth medium.
    9. Return the plate to the 37°C incubator for an additional 72 hours.


    We try 5 different 2xHBS buffers:

    • pH: 7.06
    • pH: 7.08
    • pH: 7.10
    • pH: 7.12
    • pH: 7.14
    • 1. Plate: 10µg of Rep/Cap, pHelper and GOI=mVenus; pH(2xHBS)= 7.06
    • 2. Plate: 10µg of Rep/Cap, pHelper and GOI=mVenus; pH(2xHBS)= 7.08
    • 3. Plate: 10µg of Rep/Cap, pHelper and GOI=mVenus; pH(2xHBS)= 7.10
    • 4. Plate: 10µg of Rep/Cap, pHelper and GOI=mVenus; pH(2xHBS)= 7.12
    • 5. Plate: 10µg of Rep/Cap, pHelper and GOI=mVenus; pH(2xHBS)= 7.14
    • 6. Plate: 10µg of Rep/Cap, pHelper and GOI=TKGMK; pH(2xHBS)= 7.08
    • 7. Plate: 10µg of Rep/Cap, pHelper and GOI=TKGMK; pH(2xHBS)= 7.10
    • 8. Plate: 10µg of Rep/Cap, pHelper and GOI=mVenus; pH(2xHBS)= 7.14



    The transfected cells were seeded at 19.8 (2.000.000 cells per 10 cm2)
    Used Plasmids: Standart protocol: 10µg of each plasmid

    • GOI: mVENUS => P262, conc:1148ng/µl; used amount: 8,71µl
    • GOI: TKGMK => P82b, conc:1500ng/µl; used amount: 6,67µl
    • pHELPER => P64, conc:503ng/µl; used amount: 20µl
    • RepCap => 10.8: 1348ng/µl; used amount: 7,41µl

    • Harvest viral paricles from 18.08.2010 and transduction of HT1080 cells following the standard protocol

    • Analysis via Fluorescent microscopy (Transduction from 19.08.2010)
      • Results:

    Midi-Prep of pSB1C3_lITR_CMV_betaglobin_mVenus_hGH_rITR clone1

    Investigators: Chris W.

    Comment: Midi-Preps of P 242, B200

    The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

    plasmid-no. P269p270
    concentration (ng/µl)1035,10 1376,95


    Re-Trafo of pSB1C3_SDM_SspI_Bla14FM

    Investigator: Stefan

    Comment: Mini-Prep of pSB1C3_SDM_SspI_Bla14FM showed extremely low plasmid concentrations. It was proposed that this could correspond to using not the standard lab cells but rather XL-10 Gold cells for trafo. Therefore a re-trafo was performed using BL21 cells. 2 µl of each clone was added to BL21 cells and trafo was performed. Clones can be picked tonight (Volker)!


    97. labday 22.08.2010

    Test-digestion of pCerulean (P273,4,5), pSB1C3_VP1up (P279, 280), pSB1C3_NLS (P281,282), pAAV_RC_final (P283)

    Investigator: Patrick
    Digestions:

    • 0,5 µl EcoRI, 0,5 µl Enzyme PstI, 1 µl BSA (10x), 1 µl Buffer 4 (10x), 1 µl pCerulean (P73), 6 µl H2O; total volume = 10 µl
    • 0,5 µl EcoRI, 0,5 µl Enzyme PstI, 1 µl BSA (10x), 1 µl Buffer 4 (10x), 1 µl pCerulean (P74), 6 µl H2O; total volume = 10 µl
    • 0,5 µl EcoRI, 0,5 µl Enzyme PstI, 1 µl BSA (10x), 1 µl Buffer 4 (10x), 1 µl pCerulean (P75), 6 µl H2O; total volume = 10 µl
    • 1 µl NotI, 1 µl BSA (10x), 1 µl Buffer 4 (10x), 1 µl pSB1C3_VP1up (P279), 6 µl H2O; total volume = 10 µl
    • 1 µl NotI, 1 µl BSA (10x), 1 µl Buffer 4 (10x), 1 µl pSB1C3_VP1up (P280), 6 µl H2O; total volume = 10 µl
    • 0,5 µl EcoRI, 0,5 µl Enzyme PstI, 1 µl BSA (10x), 1 µl Bufer 4 (10x), 1 µl pSB1C3_NLS (P281) , 6 µl H2O; total volume = 10 µl
    • 0,5 µl EcoRI, 0,5 µl Enzyme PstI, 1 µl BSA (10x), 1 µl Bufer 4 (10x), 1 µl pSB1C3_NLS (P282) , 6 µl H2O; total volume = 10 µl
    • 0,5 µl Acc65I, 0,5 µl BspMI, 1 µl BSA (10x), 1 µl Buffer 3 (10x) , 1 µl pAAV_RC_final , 6 µl H2O; total volume = 10 µl

    Incubation time: 37°C, 1h


    Expected size of the fragments:

    • pCerulean clone 1 : 771 & 3915 bp
    • pCerulean clone 2 : 771 & 3915 bp
    • pCerulean clone 3 : 771 & 3915 bp
    • pSB1C3_VP1up clone 1 : 468 & 2030 bp
    • pSB1C3_VP1up clone 2 : 468 & 2030 bp
    • pSB1C3_NLS clone 1 : 78 & 2031 bp
    • pSB1C3_NLS clone 2 : 78 & 2031 bp
    • pAAV_RC_final : 615 & 6720 bp


    Freiburg10 tesdigestions20100823.jpg


    pCerulean clone 1 (P273), pSB1C3_VP1up clone 2 (P280), pSB1C3_NLS clone 2 (P282) and pAAV_RC_final (P283) were sent for sequencing although the results don't look very promising.
    Labelling:

    • pCerulean clone 1 (P273) : iGEM2-CMV-F
    • pSB1C3_VP1up clone 2 (P280) : iGEM1-VF2
    • pSB1C3_NLS clone 2 (P282) : iGEM276-O51_VR2 and iGEM3-O51_VR2 (was ordered twice due to an ordering mistake)
    • pAAV_RC_final (P283) : iGEM4-SK
    • pAAV_RC_final (P283) : iGEM4-VP1 pKEX rev
    • pAAV_RC_final (P283) : iGEM4-Cap2800for
    • pAAV_RC_final (P283) : iGEM4-Cap2800rev
    • pAAV_RC_final (P283) : iGEM4-Cap3500for

    Mini-Prep of pCerulean

    Investigator: Stefan

      Glycerol stocks were prepared:
    • B225 = pCerulean clone1
    • B226 = pCerulean clone2
    • B227 = pCerulean clone3

      Mini-Prep following the standard protocol
    • P273 = pCerulean clone1 c= 419,52 ng/µl
    • P274 = pCerulean clone2 c= 383,37 ng/µl
    • P275 = pCerulean clone3 c= 382,72 ng/µl


    Test digestion will be performed tomorrow.

    98. labday 23.08.2010

    Primer design: Sequencing primer for BioBrick Assembly of vectorplasmid and phTERT qPCR primer

    Investigator: Bea

    Comment: Two goals will be accomplished with this primers.

    1. The first primer pair (left picture) serve as sequencing primers for the pSB1C3 vector plasmid. Problem was that the designed VR-2/VF-2 primers cannot be used for sequencing because the ITRs flank several assembled parts, mostly CMV, beta globin, GOI and hGH. These primers were designed to bind in the flanked region, directly after/before left and right ITR repsectivel and can therfore be used to sequence most of the flanked sequence inbetween the ITRs.
    2. The second primer pair (right picture) will be used for performing the qPCR with th econtruct containing the phTERT promoter. The qPCR primers used for the other qRT-PCR cannot be used because these two primers anneal in the CMV region. The new designed primers bind in the phTERT region and can therefore bee used for determinining the infectious titers.

    Mini-Prep of pSB1C3_CFP_middlelinker and pSB1C3_ZEGFR:1907 / testdigestion of pSB1C3_CFP_middlelinker and pSB1C3_lITR_pHTERT

    Investigator: Jessica


    Mini-Prep following the standard protocoll

    • P276 PSB1C3_CFP_middlelinker clone1 c=207,7 ng/µl
    • P277 PSB1C3_CFP_middlelinker clone2 c=203,0 ng/µl
    • P278 PSB1C3_CFP_middlelinker clone3 c=227,9 ng/µl
    • P279 pSB1C3_VP1up clone1 c=183,0 ng/µl
    • P280 pSB1C3_VP1up clone2 c=178,1 ng/µl
    • P281 pSB1C3_NLS clone1 c=155,7 ng/µl
    • P282 pSB1C3_NLS clone2 c=142,6 ng/µl
    • P283 pAAV_RC_final c=147,7 ng/µl
    • P284 pSB1C3_ZEGFR:1907 clone 1 c=146,5 ng/µl
    • P285 pSB1C3_ZEGFR:1907 clone 1 c=161,9 ng/µl


    pSB1C3_Zegfr:1907 wurde bereits von Stefan geprept... was hast du hier gemacht Jessy? Retrafo vom Glycerolstock???



      Test digestion:
    • Perfomed with 10 µL of total volume
      Mastermix/µL P256/µL P257/µL P276/µL P277/µL P278/µL
    DNA - 5 5,2 4,3 4,4 4,0
    BSA (10x) 6 1 1 1 1 1
    Buffer 4 (10x) 6
    Enzyme XbaI 3
    Enzyme PstI 3
    H2O - 2 1,8 2,7 2,6 3,0
    Total volume 18 10 10 10 10 10


    • incubation time: 50'
    • incubation temparatur: 37°C


    Freiburg10 04 08 2010 Test digestion of pSB1C3 lITR phTERT and pSB1C3 CFP middlelinker.jpg

    • 5µl new ladder mix

    Sequencing:

    • Plasmid used: P276: pSB1C3_CFP_middlelinker
    • Primer used: VR-2
    • Tube name: JG 276

    Continuation of BioBrick assembly for pSB1C3_Affibody_Linker

    Investigator: Anna

    Comment: Transformation was done of pSB1C3_Affibody with Short-Linker, Middle-Linker, Long-Linker, SEG-Linker and GSAT-Linker. Unfortunately, the digestion of pSB1C3_YFP_His-Tag didn't work (see 20.08).

    Transformation was done following the standard protocol using XL1 blue cells.

    To do: Repetition of BioBrick assembly for pSB1C3_YFP_His-Tag.

    Cloning of pSB1C3_ß-globin_YFP and pSB1C3_hGH_rITR

    Investigator: Anna

    Comment: pSB1C3_ß-globin_mVenus (p178) was digested with SpeI and PstI and pSB1C3_hGH_rITR (p186) was digested with XbaI and PstI .

    Vector:

    • pSB1C3_ß-globin_YFP (p178): c= 237,2 ng/µl

    Insert:

    • pSB1C3_hGH_rITR (p186): c= 105,2 ng/µl


    components Vector (p178)Insert (p186)
    DNA 4,2 14
    BSA (10x) 1,5 2,5
    Buffer 4 (10x)1,5 2,5
    Enzyme EcoRI 1 1,5
    Enzyme PstI 1 1,5
    H2O5,8 3
    Total volume 15 25


    • Gelextraction of pSB1C3_RFC25_CFP:

    0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , at 120 Volt, running time:55
    Marker: GeneRuler ladder mix (Fermentas)



    Freiburg10 .jpg


    • c(pSB1C3_ß-globin_YFP)= 16.9 ng/µl; size: 3293 bp
    • c(hGH_rITR)= 7,5 ng/µl; size: 657 bp


    • Ligation of PCR products and vector:

    For the Ligation 1µl T4 buffer (2x) and 1µl T4 ligase were used. Incubation time: 30 min

    vector /µl insert /µl
    pSB1C3_ß-globin_mVenus + hGH_rITR 3,41 4,59


    • Transformation:

    The transformation was done following the standard protocol using XL1 blue cells.

    To do: Picking clones of pSB1C3_ß-globin_mVenus_hGH_rITR.

    Repetition: Quickchange site-directed mutagenesis of pSB1C3_SDM_SspI_Bla14FM

    Investigator: Stefan

    Comment: To delete a PvuII restriction site in the CAT marker, a SDM will be performed.

    • PCR reaction:
    Ingredients v / µl
    10x Pfu Ultra II buffer 2,5
    dNTP0,5
    forward primer: O109 (pSB1C3 PvuII for)0,59
    reverse primer: O108 (pSB1C3 PvuII rev) 0,58
    DNA Template 10ng (1:100 dilution) 4
    DMSO (1%) 0,5
    PfuUltra II fusion 0,5
    H2O15,83
    Total volume25


    • PCR program:
    PCR Programtemperature/ °C time / s
    195 120
    295 30
    355 60
    4 (Step 2-4: 20x) 68 130
    Hold4


    SDM was performed according to protocol.

    Transformation was performed according to protocol using XL1b cells.

    FACS analysis, Seeding HT1080 and Hek293 cells

    Investigator: Kerstin, Adrian

    • Seeding HEK293 cells (100.000, 200.000, 300.000, 400.000, 500.000, 600.000 and 700.000 cells per dish)for transfection
    • FACS analysis of transduction from 21.08.2010:
    plate/well transfection plan living cells YFP expression eGFP expression
    1.1 control, no cells
    1.2 non treated cells 86,8%
    1.3 Lipo-Transfection I 83% 63,1%
    1.4 Lipo-Transfection I 84,3% 67,5%
    1.5 Lipo-Transfection I 86,4% 68,4%
    1.6 Lipo-Transfection I 81,7% 66,5%
    2.2 non treated cells 83,9%
    2.3 Lipo-Transfection II 82,6% 65%
    2.4 Lipo-Transfection II 84,7% 68,7%
    2.5 Lipo-Transfection II 81,5% 62,6%
    2.6 Lipo-Transfection II 83,1% 69,9%
    3.2 non treated cells 83,3%
    3.3 3,3µg of RC, pHelper&YFP 81,5% 50,7%
    3.4 3,3µg of RC, pHelper&YFP 75,6% 40%
    3.5 3,3µg of RC, pHelper&YFP 84,7% 63,7%
    3.6 3,3µg of RC, pHelper&YFP 82,3% 61,5%
    4.3 10µg RC mut(P158a), pHelper, 3,3µg YFP 85,8% 66,5%
    4.4 10µg RC mut(P158a), pHelper, 3,3µg YFP 84,5% 68,2%
    4.5 10µg RC mut(P158b), pHelper, 3,3µg YFP 76,9% 52,4%
    4.6 10µg RC mut(P158b), pHelper, 3,3µg YFP 56,6% 31,8%
    5.2 non treated cells 88,2%
    5.3 3,3µg RC mut(P158a), pHelper&YFP 83,9% 57,5%
    5.4 3,3µg RC mut(P158a), pHelper&YFP 89,1% 48,0%
    5.5 3,3µg RC mut(P158b), pHelper&YFP 88,8% 29,4%
    5.6 3,3µg RC mut(P158b), pHelper&YFP 85,1% 40,6%
    6.3 10µg RC, pHelper&eGFP 82,5% 75,2%
    6.4 10µg RC, pHelper, 3,3µgeGFP 87,6% 80,1%
    6.5 10µg RC, pHelper, 10µgeGFP 81,9% 41,8%
    6.6 10µg RC, pHelper, 10µgeGFP 83,4% 27,95%
    7.2 non treated cells 88,7%
    7.3 10µg RC, pHelper, 20µgeGFP 87,1% 45,4%
    7.4 10µg RC, pHelper, 20µgeGFP 86,6% 46,9%
    7.5 10µg RC, pHelper, 40µgeGFP 89,8% 0,5% ??? (negative control?)
    7.6 10µg RC, pHelper, 40µgeGFP 84,8% 54,2%
    8.2 non treated cells 90,9%
    8.3 10µg RC, pHelper, 3,3µg YFP 83,5% 41,2%
    8.4 10µg RC, pHelper, 3,3µg YFP 84,9% 42,6%
    8.5 negative control ? 86,7% 26,8%
    8.6 negative control ? 84,3% 33,7%



    • Seeding HT1080 cells for transduction with viral stocks from 23.08.2010:
      • 3x 6er wells(Transductionplan 23.08.2010):

    Miniprep of pSBC13_Bla

    Investigator: Chris L.

    Plasmid Mini-Prep


    Gycerol stock was prepared and labeled for pSB1C3_Bla clone 1.1 (B236), 1.2 (B237), 2.1 (B238) and 2.2 (B239).B167.

    Miniprep was performed according to protocol.

    Samples were labeled:

    • pSB1C3_Bla clone 1.1 = P286
    • pSB1C3_Bla clone 1.2 = P287
    • pSB1C3_Bla clone 2.1 = P288
    • pSB1C3_Bla clone 2.2 = P289

    Concentrations:

    • pSB1C3_Bla clone 1.1 (P286): 95.24 ng/µl
    • pSB1C3_Bla clone 1.2 (P287): 84.92 ng/µl
    • pSB1C3_Bla clone 2.1 (P288): 43.66 ng/µl
    • pSB1C3_Bla clone 2.2 (P289): 43.95 ng/µl


    Test digestion: pSB1C3_Bla 1.1, 1.2, 2.1 and 2.2 were digested with NotI. pSB1C3_Bla 1.1, 1.2, 2.1 and 2.2 were digested with SspI and SalI. pSB1C3_Bla 1.1, 1.2, 2.1 and 2.2 were digested with BamHI and PvuII.

    components volume of P286/µl volume of P286/µlvolume of P286/µl volume of P287/µl volume of P287/µlvolume of P287/µlvolume of P288µl volume of P288/µlvolume of P288µl volume of P289/µlvolume of P289/µlvolume of P289/µl
    DNA 2 2 2 2 2 2 4 4 4 4 4 4
    BSA (10x) 1 1 1 1 1 1 1 1 1 1 1 1
    Buffer 4 (10x) 1 1 1 1 1 1 1 1 1 1 1 1
    Enzyme NotI 0,5 0 0 0,5 0 0 0,5 0 0 0,5 0 0
    Enzyme SspI 0 0,5 0 0 0,5 0 0 0,5 0 0 0,5 0
    Enzyme SalI 0 0,5 0 0 0,5 0 0 0,5 0 0 0,5 0
    Enzyme BamHI 0 0 0,5 0 0 0,5 0 0 0,5 0 0 0,5
    Enzyme PvuII 0 0 0,5 0 0 0,5 0 0 0,5 0 0 0,5
    H2O 5.5 5 5 5,5 5 5 3.5 3 3 3.5 3 3
    Total volume /µl10 10 10 10 10 10 10 10 10 10 10 10


    Incubation time: 1 h, Incubation temperature: 37°
    2 Gels were made:
    0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , running time: 15 minutes at 90 Volt and 30 minutes at 120 Volt
    2µl loading dye (6x) for the sample, Marker: 5 µl GeneRuler ladder mix (Fermentas)

    Sample Sample/µl] Loading dye (6x)/µl Expected size 1 (Geneious) Expected size 2 (Geneious)
    P286 NotI /µl 10 µl 2 µl 905 bp 2052 bp
    P286 SspI/SalI /µl 10 µl 2 µl 854 bp 2099 bp
    P286 BamHI/PvuII/µl 10 µl 2 µl 837 bp 2116 bp
    P287 NotI /µl 10 µl 2 µl 905 bp 2052 bp
    P287 SspI/SalI /µl 10 µl 2 µl 854 bp 2099 bp
    P287 BamHI/PvuII/µl 10 µl 2 µl 837 bp 2116 bp
    P288 NotI /µl 10 µl 2 µl 905 bp 2052 bp
    P288 SspI/SalI /µl 10 µl 2 µl 854 bp 2099 bp
    P288 BamHI/PvuII/µl 10 µl 2 µl 837 bp 2116 bp
    P289 NotI /µl 10 µl 2 µl 905 bp 2052 bp
    P289 SspI/SalI /µl 10 µl 2 µl 854 bp 2099 bp
    P289 BamHI/PvuII/µl 10 µl 2 µl 837 bp 2116 bp


    • Marker: GeneRuler ladder mix
    Marker Sample P286 NotI /µl Sample P286 SspI/SalI /µl Sample P286 BamHI/PvuII/µl Sample P287 NotI /µl Sample P287 SspI/SalI /µl Sample P287 BamHI/PvuII/µl Marker
    Lane 1 3 4 5 7 8 9 11


    • Marker: GeneRuler ladder mix
    Marker Sample P288 NotI /µl Sample P288 SspI/SalI /µl Sample P288 BamHI/PvuII/µl Sample P289 NotI /µl Sample P289 SspI/SalI /µl Sample P289 BamHI/PvuII/µl Marker
    Lane 1 3 4 5 7 8 9 11


    Freiburg10 pSB1C3 Bla P286 P287.pngFreiburg10 pSB1C3 Bla P288 P289.png

    Comments: Strange results, seems like the test digestion didn't work out. Repitition of test digestion tomorrow.

    99. labday 24.08.2010

    Sequence analysis of pSB1C3_CFP_middlelinker

    Investigator: Jessica


    Freiburg10 pSB1C3 CFP middlelinker.jpg

    • pSB1C3_CFP_middlelinker is ready


    Harvest viral particles, Transduction of HT1080

    Investigator: Kerstin

    • Harvest viral particles following the standard protocol
    • Transduction of three 6-well plates:

    Plate 1 YFP: 150.000 cells per well

    1 2 3
    A control, no cells 500µl virus (1) 500µl virus (2)
    B control, no virus 500µl virus (1) 500µl virus (2)

    Plate 2 YFP: 150.000 cells per well

    1 2 3
    A control, no cells 500µl virus (3) 500µl virus (4)
    B control, no virus 500µl virus (3) 500µl virus (4)

    Plate 3 YFP: 200.000 cells per well

    1 2 3
    A control, no cells 500µl virus (5) 500µl virus (9)
    B control, no virus 500µl virus (9) 500µl virus (5)


    • (1)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,06
    • (2)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,08
    • (3)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,10
    • (4)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,12
    • (5)= 10µg RC, 10µg pHelper, 10µg GOI (YFP); pH(2xHBS)=7,14
    • (9)= 10µg RC, 10µg pHelper, 3,3µg GOI (eGFP)

    Mini-prep of SDM NgoMIV CD

    Investigator: Kira
    Motivation: Harvest DNA for further analysis, e.g. test digestion

    Mini-prep was performed on 3 colonies.

    c(clone1) = 358, 05 ng/ul c(clone2) = 352, 10 ng/ul c(clone 3) = 376, 53 ng/ul

    Sent for sequencing: pSB1C3_6xHis

    Investigator: Jessica

    • Plasmid: P84 c= 107,8 ng/µl
    • Primer: VR2
    • tube number: JG84

    Subcloning Cap into pAAV_RC_ins-rep

    Investigator: Stefan

    Comment: Sequencing of pAAV_RC_final showed that Cap was not inserted succsessfully. Therefore it has to be repeated.

    Digestion of vector and insert:

    • Insert: pMA_RepCap Vector_SDM_InsPvuII clone 1 (P211)
    • Vector: pAAV_RC_ins-rep clone1 (P250)



    A two-step digestion was performed:

    1st step

    P211 / µl P250 / µl
    DNA5,8 5,2
    buffer 32 2
    Enzyme BsiWI1 1
    H2O11,2 11,8
    total volume20 20


    2nd step

    P211 / µl P250 / µl
    Mix obtained from step 1 20 20
    Enzyme BspMI1 1
    H2O1,25 1,25
    total volume22,25 22,25


    Samples were loaded on a 0,8% agarose gel an run at 115V for about 60 minutes.



    Gelextraction:

    Gelex was performed according to protocol exept for elution was done with 60 µl instead of 20 µl.

    • c(P211)= 1,14 ng/µl
    • c(P250)= 5,60 ng/µl



    T4 Ligation:
    T4 ligation was performed according to protocol. used DNA amounts:

    • v(P211)= 2,56 µl
    • v(P250)= 5,44 µl



    Transformation:

    Trafo was performed according to protocol using XL1b cells.

    Test digestion of pCerulean (p273)

    Investigator: Anissa

    Comments:Sequencing of pCerulean showed strange results, because the qualtity of sequenzing was not good. For working further with pCerulean, we started with a test digestion, to be sure, everything works.
    Because the sequencing showed no AgeI, we cut one time with AgeI and EcoRI, the other time with NotI.


    Components p273/µL p273/µL
    DNA 2 2
    BSA (10x) 1,51,5
    Buffer 4 (10x) 1,5 1,5
    Enzyme 1 0,5 NotI0,5 EcoRI
    Enzyme 2 0,5 NotI 0,5 AgeI
    H2O 9 9
    Total volume 1515


    test digestion of pCerulean

    Comments: Results of digestion seem to be all right

    Cloning of VP1up into PCerulean

    Investigator: Anissa
    VP1up was cut out of pSB1C3 and into pCerulean

    • Digestion:

      Components Vector/µL Insert/µL
      DNA 3,78,4
      BSA (10x) 1,52
      Buffer 4 (10x) 1,5 2
      Enzyme 1 EcoRI 1 1
      Enzyme 2 PstI 1 1
      H2O 6,3 5,6
      Total volume 15 20


    • Gel:
      A 1% agarose-gel was made, after 30 minutes samples were cut
      test digestion of pCerulean
    • Gelextraction was performed according the standardprotocol
    • Ligation:
      Components used volume for T4 ligation/µL concentration /ng/µl
      Vector 5,1527,7
      Insert 2,8515,4

      In addition 1µl T4-ligase and 1µl T4-ligase-buffer were added

    • Transformation: was performes into Xl1 blue according the standard-protocol

    Sequence analysis of sequencing reads prepared yesterday (23.08.2010)

    Investigator: Bea

    GENERAL COMMENT: pSB1C3 {NLS and VP1up} were sent for sequencing. Aswell as the pAAV_RC_final which contains all four mutations in the Rep-Cap gene and the integrated and synthesiezd rep and cap gene and the plasmid pCerulean whith the CMV promoter and sv40 polyadenylation site.


    Comments: Sequence analysis of pAAV_RC_final containing the subcloned "rep" (ordered) and "Cap (ordered) plus the four mutations to delete the restriction sites PstI, BamHi and SalI.

    • Primer used:
      • VP1 primer for pKex
      • GATC_std_SK
      • Primer Cap 2800 rev
      • Primer Cap 2800 for
      • Primer Cap 3500 for
    • Plasmid sequenced: P283
    • Sequence sample: iGEM4
    • Stored in Geneious-folder: RepCap insert ordered


    Results:

    Sequencing of the mutation ok. Rep integration worked. Cap integration needs to be repeated.


    Next steps: Repetition of the integration of the synthesized cap gene performed by Stefan (see topic).

    Comments: Sequence analysis of pSB1C3_NLS

    • Primer used: VR-2
    • Plasmid sequenced: P282
    • Sequence sample: iGEM3_O51_VR-2
    • Stored in folder: pSB1C3_NLS


    Results:

    Insertion of the nuclear localisation signal (NLS) into the pSB1C3_NLS as one step in the N-terminal insertion of targeting molecules. Sequencing results look good. prefix and suffix ok!


    Next steps: Fuse NLS to targeting molecule.

    Comments: Sequence analysis of pSB1C3_VP1up

    • Primer used: VF-2
    • Plasmid sequenced: P280
    • Sequence sample: iGEM1_VF-2
    • Stored in folder: N-Terminal targeting --> pSB1C3_VP1up


    Results:

    Prefix ok, but annotation is wrong. VP1up should start with: GC!! Suffix ok! The additional EcoRI before the prefix standard can be due to the bad sequence read quality.


    Next steps: Clone VP1up into pCerulean in order to obtain the plasmid with a CMV promoter and the sv40 polyadenylation site.

    Comments: Sequence analysis of pCerulean

    • Primer used: GATC_CMV-F
    • Plasmid sequenced: P273
    • Sequence sample: iGEM2_CMV-F
    • Stored in folder: N-Terminal targeting --> pCerulean


    Results:

    It seem that the suffix is not correct which means that AgeI, PstI and NotI is missing. This can be due to the bad sequence quality. Prefix is ok!


    Next steps: For verification a test digestion with the missing restriction sites will be perforemd and another round of sequencing will be conducted.

    top of page

    Test digestion of SDM NgoMIV CD

    Investigator: Kira
    Motivation: In order to check if site directed mutagenesis was successfull, test digestion was performed with 3 clones, which were picked yesterday as well as with 'original' DNA, which still contains all the restriction sites

  • Test digestion:

    Components clone 1/µL clone 2/µL clone 3/µL original/µL
    DNA (500ng) 1,41,4 1,4 1,4
    BSA (10x) 1 1 1 1
    Buffer 4 (10x) 1 1 1 1
    Enzyme 1 NgoMIV 0,5 0,50,50,5
    H2O 6,1 6,1 6,1 6,1
    Total volume 10 10 10 10



    Bitte schneid mich aus !

    Freiburg10 test digestion NgoMIV.jpg

    According to the gel, NgoMIV SDM was successful in clones 1 and 2. Clone 3 well reveales 2 bands of unknown origin. Samples 1 and 3 were sent for sequencing.

    Picking clones of pSB1C3_Affibody_linker and pSB1C3_ß-Globin_YFP_hGH_rITR

    Investigator: Anna

    Comments: A 1:1000 dilution of pSB1C3_Affibody_GSAT-Linker was prepared.
    To do: Mini-Prep of pSB1C3_Affibody_(Short/Middle/Long and SEG-Linker) and pSB1C3_ß-Globin_YFP_hGH_rITR. Picking clones of pSB1C3_Affibody_GSAT-Linker.

    Test digestion of pSB1C3_SDM_SspI_Bla14FM (P222), pSB1C3_BLA (P286, P288)

    Investigator: Achim

    CommentsNew test digestion of two SDM-attempts, this time we also digested the original vector containing the PvuII restriction site to see differences.



    Freiburg10 Test digestion of pSB1C3 BLA final 24 08 2010.jpg


    • The original vector is being cut as expected: the uncut vector can be seen in different conformations, the linearized vector shows one distinct band and the digestions cutting out BLA show a band at ~900 bp. Our SDM attempts show inconsistent results, not only does the Pvu site still seem to be in the backbone, there are no more proper insert bands visible either. We therefore conclude that either the DpnI digestion or the dilution of the transformation must have gone wrong (differing plasmids...). Tomorow we'll try a new cloning approach using an old vector with deleted Pvu restriction site and MscI & XbaI digestion. In case this also fails we also yet have to prep and test digest the repetition of the mutagenesis which was carried out by Stefan.



    Results:

    Prefix ok, but annotation is wrong. VP1up should start with: GC!! Suffix ok! The additional EcoRI before the prefix standard can be due to the bad sequence read quality.


    Next steps: Clone VP1up into pCerulean in order to obtain the plasmid with a CMV promoter and the sv40 polyadenylation site.

    Comments: Sequence analysis of pCerulean

    • Primer used: GATC_CMV-F
    • Plasmid sequenced: P273
    • Sequence sample: iGEM2_CMV-F
    • Stored in folder: N-Terminal targeting --> pCerulean


    Results:

    It seem that the suffix is not correct which means that AgeI, PstI and NotI is missing. This can be due to the bad sequence quality. Prefix is ok!


    Next steps: For verification a test digestion with the missing restriction sites will be perforemd and another round of sequencing will be conducted.

    top of page

    Test digestion of SDM NgoMIV CD

    Investigator: Kira
    Motivation: In order to check if site directed mutagenesis was successfull, test digestion was performed with 3 clones, which were picked yesterday as well as with 'original' DNA, which still contains all the restriction sites

  • Test digestion:

    Components clone 1/µL clone 2/µL clone 3/µL original/µL
    DNA (500ng) 1,41,4 1,4 1,4
    BSA (10x) 1 1 1 1
    Buffer 4 (10x) 1 1 1 1
    Enzyme 1 NgoMIV 0,5 0,50,50,5
    H2O 6,1 6,1 6,1 6,1
    Total volume 10 10 10 10



    Bitte schneid mich aus !

    Freiburg10 test digestion NgoMIV.jpg

    According to the gel, NgoMIV SDM was successful in clones 1 and 2. Clone 3 well reveales 2 bands of unknown origin. Samples 1 and 3 were sent for sequencing.

    Picking clones of pSB1C3_Affibody_linker and pSB1C3_ß-Globin_YFP_hGH_rITR

    Investigator: Anna

    Comments: A 1:1000 dilution of pSB1C3_Affibody_GSAT-Linker was prepared.
    To do: Mini-Prep of pSB1C3_Affibody_(Short/Middle/Long and SEG-Linker) and pSB1C3_ß-Globin_YFP_hGH_rITR. Picking clones of pSB1C3_Affibody_GSAT-Linker.

    Test digestion of pSB1C3_SDM_SspI_Bla14FM (P222), pSB1C3_BLA (P286, P288)

    Investigator: Achim

    CommentsNew test digestion of two SDM-attempts, this time we also digested the original vector containing the PvuII restriction site to see differences.



    Freiburg10 Test digestion of pSB1C3 BLA final 24 08 2010.jpg


    • The original vector is being cut as expected: the uncut vector can be seen in different conformations, the linearized vector shows one distinct band and the digestions cutting out BLA show a band at ~900 bp. Our SDM attempts show inconsistent results, not only does the Pvu site still seem to be in the backbone, there are no more proper insert bands visible either. We therefore conclude that either the DpnI digestion or the dilution of the transformation must have gone wrong (differing plasmids...). Tomorow we'll try a new cloning approach using an old vector with deleted Pvu restriction site and MscI & XbaI digestion. In case this also fails we also yet have to prep and test digest the repetition of the mutagenesis which was carried out by Stefan.

    100. labday 25.08.2010

    Cloning of pSB1C3_Rep40, pSB1C3_Rep68 and pMA_RC_insert

    Investigator: Chris L.

    • buffer used: 2; Restriction-enzymes used: Enzyme 1: HindIII ; Enzyme 2: BstEII

    Plasmids:

    • pSB1C3_Rep40 P231
    • pSB1C3_Rep68 P266
    • Insert:

    • pMA_RC_insert P190


    Components P190/µL P231/µL P266/µL
    DNA 5.9 6.4 5
    BSA (10x) 2 2 2
    Buffer 2 (10x) 2 2 2
    Enzyme 1 HindIII 1 1 1
    Enzyme 2 BstEII 1 1 1
    H2O 8.1 7.6 9
    Total volume 20 20 20


    • Incubation: 90 minutes; 37°C with HindIII
    • Incubation: 90 minutes; 60°C with BstEII


    Agarosegel
    0.5 g Agarose, 50 ml TAE (1 %), 3 µL GELRED, 5 min at 90 Volt, 40 min at 115 Volt
    Freiburg 10 pSB1C3 Rep40 pSB1C3 Rep68 pMA RC Insert.png
    Concentrations measured via NanoDrop:

    • pSB1C3_Rep40: 81.97 ng/µl
    • pSB1C3_Rep68: 48,68 ng/µl
    • RC_Insert: 3,60 ng/µl


    T4 Ligation of pSB1C3_Rep40 with RC_Insert
    Volume insert: 6,54 µl
    Volume vector: 1,46 µl

    T4 Ligation of pSB1C3_Rep68 with RC_Insert
    Volume insert: 5,46 µl
    Volume vector: 2,54 µl

    Trafo was prepared with XL1blue and Cm

    Picking clones of pAAV_RC-ins_rep_cap and pCeruleanVP1up

    Investigator: Chris L.

    To do: Mini-Prep of pAAV_RC-ins_rep_cap and pCeruleanVP1up.

    Cloning of pSB1C3_6xHis with middlelinker and pSB1C3_6xHis with pGA14_mVenus_YFP

    Investigator: Jessica

    • buffer used: 4; Restriction-enzymes used: Enzyme 1: AgeI ; Enzyme 2: PstI ; Enzyme3: NgoMIV
    • Plasmids:
      • pSB1C3_6xHis P84
      • pGA14_middle linker P65
      • GA14_mVenus_YFP P60



    Components Mastermix P84/µL P65/µL P60/µL
    DNA - 13,91 13,52 8,93
    BSA (10x) -2 2 2
    Buffer 4 (10x) - 2 2 2
    Enzyme 1 AgeI - 1 - -
    Enzyme 2 PstI - 1 1 1
    Enzyme 3 NgoMIV - - 1 1
    H2O - 0,09 0,48 5,07
    Total volume - 20 20 20


    • Incubation:110 minutes; 37°C

    Agarosegel
    0.5 g Agarose, 50 ml TAE (1 %), 3 µL GELRED, at 120 Volt



    Freiburg10 gel cut n terminus1.jpg


























    concentrations measured via NanoDrop:

    • SB1C3_6xHis: 1,7 ng/µl
    • middle linker: 3,8 ng/µl
    • mVenus_YFP: 3,2 ng/µl


    T4 Ligation pSB1C3_6xHis_middlelinker
    Volume insert: 0,25 µl
    Volume vector: 7,75 µl

    T4 Ligation pSB1C3_6xHis_mVenus_YFP
    Volume insert: 2,64 µl
    Volume vector: 5,36 µl

    Trafo was prepared with XL1blue and Cm

    Sequence analysis of pSB1C3_6xHis

    Investigator: Jessica
    P84 was sequenced for continuation of working with it


    Freiburg10 pSB1C3 6xHis.jpg

    • pSB1C3_6xHis P84 is ready to use, but is empty. a new tube will be made tomorrow

    Inoculation of pGA14_middlelinker and pSB1C3_6xHis clone1

    Investigator: Jessica

    • both tubes (P65 and P84)are empty --> inoculation with glycerolstocks
      • B48 pGA14_middlelinker was inoculated with 10ml DYT and 10µl Amp
      • B64 pSB1C3_6xHis clone1 was inoculated with 10ml DYT and 10µl Cm

    Cloning of pSB1C3_SspI_BLA and pSB1C3_CFP_PvuII

    Investigator: Achim

    Comment:I ligated a sequence from pSB1C3_CFP_PvuII missing the PvuII restriction site into pSB1C3_SspI_BLA to obtain a pSB1C3 vector without PvuII in the cat marker.

    Vector:

    • pSB1C3_SspI_BLA (p222): c= 308,32 ng/µl

    Insert:

    • pSB1C3_CFP_PvuII (p129): c= 264,86 ng/µl


    components Vector Insert
    DNA 3,8 4,9
    BSA (10x) 2 2
    Buffer 4 (10x)2 2
    Enzyme MscI 1 1
    Enzyme XbaI 1 1
    H2O10,2 9,1
    Total volume 20 20


    • Gelextraction:

    0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , at 110 Volt, running time:45
    Marker: GeneRuler ladder mix (Fermentas)



    Freiburg10 25082010achim.JPG


    • c(Insert)= 15,66 ng/µl; size: 730 bp
    • c(Vector)= 14,42 ng/µl; size: 2200 bp


    • Ligation of PCR products and vector:

    For the Ligation 1µl T4 buffer (2x) and 1µl T4 ligase were used. Incubation time: 60 min due to blunt end ligation

    vector /µl insert /µl
    pSB1C3_BLA 0,86 7,14


    • Transformation:

    The transformation was done following the standard protocol using XL1 blue cells.

    Comment: Two clones were picked, but because we already obtained our plasmid via SDM in the meantime, no prep was performed. Glycerol stocks of the two clones were created just in case, B264 and B265.

    Mini-Preps and test digestion of pSB1C3_Affibody_Middle-Linker, pSB1C3_Affibody_Short-Linker, pSB1C3_Affibody_SEG-Linker, pSB1C3_Affibody_Long-Linker and pSB1C3_betaglobin_mVenus_hGH_rITR

    Investigator: Stefan

      Glycerol stocks were prepared:
    • B240 = pSB1C3_Affibody_Middle-Linker clone1
    • B241 = pSB1C3_Affibody_Middle-Linker clone2

    • B242 = pSB1C3_Affibody_Short-Linker clone 1
    • B243 = pSB1C3_Affibody_Short-Linker clone 2

    • B246 = pSB1C3_Affibody_SEG-Linker clone1
    • B247 = pSB1C3_Affibody_SEG-Linker clone2

    • B248 = pSB1C3_Affibody_Long-Linker clone 1
    • B249 = pSB1C3_Affibody_Long-Linker clone 2

    • B244 = pSB1C3_betaglobin_mVenus_hGH_rITR clone 1
    • B245 = pSB1C3_betaglobin_mVenus_hGH_rITR clone 2


    • Mini-Prep following the standard protocol

    • P290 = pSB1C3_Affibody_Middle-Linker clone1 c= 227,36 ng/µl
    • P291 = pSB1C3_Affibody_Middle-Linker clone2 c= 219,05 ng/µl

    • P292 = pSB1C3_Affibody_Short-Linker clone 1 c= 196,63 ng/µl
    • P293 = pSB1C3_Affibody_Short-Linker clone 2 c= 224,76 ng/µl

    • P296 = pSB1C3_Affibody_SEG-Linker clone1 c= 218,68 ng/µl
    • P297 = pSB1C3_Affibody_SEG-Linker clone2 c= 229,66 ng/µl

    • P298 = pSB1C3_Affibody_Long-Linker clone 1 c= 229,73 ng/µl
    • P299 = pSB1C3_Affibody_Long-Linker clone 2 c= 202,05 ng/µl

    • P294 = pSB1C3_betaglobin_mVenus_hGH_rITR clone 1 c= 425,14 ng/µl
    • P295 = pSB1C3_betaglobin_mVenus_hGH_rITR clone 2 c= 328,28 ng/µl

    Test digestion

    • Restriction-enzymes used: for P290-P293 and P296-P299: NotI ; for P294-P295: NgoMIV and PstI

    comment: The same amount of ingredients were used for P290-P293 and P296-P299, therefore these approaches will be merged into the chart. The same goes for P294-P295.

    Components P290-P293 and P296-P299 P294-P295
    DNA 1 1
    BSA (10x) 1 1
    Buffer 4 (10x) 1 1
    NotI 0,5 -
    NgoMIV - 0,5
    PstI - 0,5
    H2O 6,5 6
    Total volume 10 10


    Incubation time: 70 minutes; Incubation temperature: 37°
    0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , running time:5 minutes at 90 Volt and 50 minutes at 115 Volt
    2µl loading dye (6x) for the sample, Marker: GeneRuler ladder mix (Fermentas)

    Freiburg10 test digestion affi+linker right assembly.jpg

    Comment: Sizes of fragments look like expected. Clone 1 of each plasmid will be sent for sequencing tomorrow.

    Sequenzing evaluation of SDM NgoMIV

    Investigator: Kira

    2 samples have been sent for sequencing yesterday. According to the data, both samples do not contain any NgoMIV restriction site anymore.


    Freiburg10 sample 1, seq 1.jpg


    Freiburg10 sample 3, seq2.jpg

    101. labday 26.08.2010

    Mini-Preps of pGA14_middle linker and pSB1C3_6xHis clone 1

    Investigator: Jessica

      Glycerol stocks were not prepared because I have inoculated from glycerol stocks
      Mini-Prep following the standard protocol
    • P301 = pGA14_middle linker (= P65)
      c=305,7

    • P300 = pSB1C3_6xHis clone 1 (= P84)
      c=177,5


    Mini-Preps and test digestion of pAAV_RC-ins_rep_cap, pCeruleanVP1up and pAAV_RC_ins-rep-cap.

    Investigator: Chris L.

      Glycerol stocks were prepared:
    • B250 = pCerulean_VP1up clone1
    • B251 = pCerulean_VP1up clone2
    • B252 = pCerulean_VP1up clone3
    • B253 = pCerulean_VP1up clone4
    • B254 = pSB1C3_VCK_Bla clone1
    • B255 = pSB1C3_VCK_Bla clone2
    • B256 = pSB1C3_VCK_Bla clone3
    • B257 = pSB1C3_VCK_Bla clone4
    • B262 = pAAV_RC_ins-rep-cap clone1
    • B263 = pAAV_RC_ins-rep-cap clone2

    • Mini-Prep following the standard protocol

    • P302 = pCerulean_VP1up clone1
      c=410,70 ng/µl
    • P303 = pCerulean_VP1up clone2
      c=387,78 ng/µl
    • P304 = pCerulean_VP1up clone3
      c=321,04 ng/µl
    • P305 = pCerulean_VP1up clone4
      c=350,34 ng/µl
    • P306 = pSB1C3_VCK_Bla clone1
      c=82,53 ng/µl
    • P307 = pSB1C3_VCK_Bla clone2
      c=92,70 ng/µl
    • P308 = pSB1C3_VCK_Bla clone3
      c=82,22 ng/µl
    • P309 = pSB1C3_VCK_Bla clone4
      c=105,34 ng/µl
    • P314 = pAAV_RC_ins-rep-cap clone1
      c=517,04 ng/µl
    • P315 = pAAV_RC_ins-rep-cap clone2
      c=444,33 ng/µl

    Test digestion:

    components volume of P302/µl volume of P303/µlvolume of P304/µl volume of P305/µl volume of P306/µlvolume of P306/µlvolume of P306µl volume of P307/µlvolume of P307µl volume of P307/µlvolume of P308/µlvolume of P308/µl volume of P308/µl volume of P309/µl volume of P309/µl volume of P309/µlvolume of P314/µl volume of P315/µl
    DNA 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 1 1
    BSA (10x) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
    Buffer 4 (10x) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - -
    Buffer 2 (10x) - - - - - - - - - - - - - - -- 1 1
    Enzyme NotI - - - - 0,5 - - 0,5 - - 0,5 - - 0,5 - - - -
    Enzyme SspI - - - - - 0,5 - - 0,5 - - 0,5 - - 0,5 - - -
    Enzyme SalI - - - - - - 0,5 - - 0,5 -- 0,5 - - 0,5 - -
    Enzyme BamHI - - - - - - 0,5 - - - - - - - - - --
    Enzyme PvuII - - - - - - 0,5 - - - - - - - - - --
    Enzyme Acc65I - - - - - - - - - - - - - - -- 0,75 0,75
    Enzyme XcmI - - - - - - - - - - - - - - -- 0,5 0,5
    Enzyme PstI 0,5 0,5 0,5 0,5 - - - - - - - - - - - - - -
    Enzyme EcoRI 0,5 0,5 0,5 0,5 - - - - - - - - - - - - - -
    H2O 6 6 6 6 5,5 5 5 5,5 5 5 5,5 55 5,5 5 5 5,75 5,75
    Total volume /µl10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10


    Incubation time: 1 h, Incubation temperature: 37°
    Preparation of gel:
    1 g Agarose, 100 ml TAE (1%), 6 µl GELRED , at 115 Volt, running time: 50 minutes

    Freiburg10 test digestion pSB1C3 VCK Bla+pCerulean Vp1up.jpg

    Results:

    pSB1C3_VCK_Bla: Test digestion looks like expected. Clone 4 was sent for sequencing.
    pCerulean_VP1up: Gel looks well as well. clone 2 was sent for sequencing.
    pAAV_RC_ins-rep-cap: Test digestion looks strange. Just one big band with more than 10000 bp and one very small with 150 bp. Maybe the restriction enzymes didn´t cut. (@Christian: please insert picture)

    102. labday 27.08.2010

    Sequence analysis of pSB1C3_Bla_final (P309)and pCerulean_VP1up (P303)

    Investigator: Bea

    GENERAL COMMENT: pSB1C3_Bba_final (P309, SB_9) and pCerulean_Vp1up (P303; SB_10) were sent for sequencing. In the case of SB1C3_Bba_final, which means that the whole vector was assembled from the buttom,the purpose was to test the designed primers. In the other case we wanted to verify the insertion of Vp1up inot pCerulean.


    Comments: Sequence analysis of pSB1C3_leftITR_CMV_betaglobin_mVenus_hGH_rightITR.

    • Primer used:
      • pSB1C3_Bba_seq_for
      • pSB1C3_Bba_seq_rev
    • Plasmid sequenced: P??
    • Sequence sample: ??
    • Stored in Geneious-folder: BioBricks --> final parts


    Results:

    Results look good. The forward primer worked, still waiting for the results of the reverse primer. The scar inbetween the CMV promoter and the beat globin intron corresponds to the expected result.


    Next steps: Wwait until sequencing results of the reverse primer can be confirmed aswell. If that will not be the case, order new sequensing primer.

    top of page

    Comments: Sequence analysis of pCerulean_Vp1up.

    • Primer used: CMV-F
    • Plasmid sequenced: P303
    • Sequence sample: ??
    • Stored in Geneious-folder: N-terminal Targeting --> pCerulean_Vp1up


    Results:

    Results are good. Insertion of the Vp1up region can be confirmed.


    Next steps: Fuse pCerulean_Vp1up to the NLS.

    top of page

    Hybridisation and cloning of loop insertions

    Investigator: Achim, Volker

    We hybridized the oligos for the different loop insertions and cloned them into the pSB1C3_BLA backbone.

    Hybridisation

    • 4 Inserts contained overlapping ends and had to be filled up using Klenov fragments. We therefore added Klenow buffer and dNTPs to those samples.
    Components 453 BAP 587 BAP 587 KO BAP 453 RGD 587 RGD 587 KO RGD 453 HIS 587 HIS 587 KO HIS 587 KO EMPTY 453 Z34C 587 Z34C 587 KO Z34C 587 KO Z34C SPACER
    Oligo 1O124: 10 O126: 10 O128: 10 O130: 10 O132: 10 O134: 10 O135: 10 O137: 10 O139: 10 O141: 10 O143: 10 O145: 10 O147: 10 O149: 10
    Oligo 2 O125: 10 O127: 10 O129: 10 O131: 10 O133: 10 O151: 10 O136: 10 O138: 10 O140: 10 O142: 10 O144: 10 O146: 10 O148: 10 O150: 10
    TrisHCl pH8444444 4444----
    5mM MgCl2888888 8888----
    Klenow Buffer------ ----4444
    dNTP Mix------ ----1111
    H2O888888 888815151515
    Total volume 40 40 40 40 40 40 40 40 40 40 40 40 40 40
    • Hybridisation was carried out according to standard protocoll
    • Klenov fill-in reaction:
      • Added 1 µl of NEB Klenow fragment to samples 11,12,13,14
      • incubated for 1h @ 37°C

    Digestion of pSB1C3_BLA vector and Samples 11-14

    • We digested the standard vector with the 453 (Ssp/Sal) and the 587 (Bam/Pvu) standard. The samples that were filled in were also digested to create sticky ends.
    Components V453 V587 11 12 13 14
    DNA 2,5 2,5 3,5 3,5 3,5 3,5
    BSA (10x) - - - - - -
    Buffer 4 (10x) 2 2 2 2 2 2
    Enzyme 1 Ssp: 1 Bam: 1 Ssp: 1 Bam: 1 Bam: 1 Bam: 1
    Enzyme 2 Sal:1 Pvu: 1 Sal: 1 Pvu: 1 Pvu: 1 Pvu: 1
    H2O 13,5 13,5 12,5 12,5 12,5 12,5
    Total volume 20 20 20 20 20 20

    Gel Extraction

    Freiburg10 27082010achim.JPG

    Ligation

    Cloning of pCerulean_VP1up_NLS

    Investigator: Anissa

    Comment:Cloning did not work, because no NLS-band could be seen in the gel... Will be repeated on monday in two new approaches. One time VP1up will be cloned into pSB1C3_NLS and recloned as a fusion-product into pCerulean. Another time the oligos of NLS will be hybridisized, cut with rescriction enzymes and purificated with the Qiaex II kit.Then the NLS will be ligated into the pCerulean_VP1up


    • Digestion:
    components Vector Insert
    DNA 2,6 32
    BSA (10x) 1,5 -
    Buffer 4 (10x)1,5 4
    Enzyme 1 PstI 2 PstI
    Enzyme 1 AgeI 2 NgoMIV
    H2O7,4 -
    Total volume 15 40


    • Gel: that's only the picture of the 2% agarose gel for seperating the NLS. But no band could be seen.

    Freiburg10 NLS.jpg

    DARPin E_01

    Investigator: Bea

    General overview of DARPins:

    Natural protein ankyrin repeat molecules are motifs which can be found in proteins. These motifs are mediating protein-protein interactions. This suggests that ankyrin repeat (AR) proteins can be used for designing binding molecules. In Kohl et al. (2003) and Binz et al. (2003) the authors designed a structural framework with fixed consensus regions and randomized positions of interacting residues.

    The repetitive nature of the ankyrin proteins allows modifications in their variable and modular binding surface. Therefore consensus sequences of natural ankyrin proteins were used to design novel and stable scaffolds for binding proteins. Designed Ankyrin Proteins (DARPins) are well expressed, monomeric in solution, thermodynamically stable and have the ability to fold fast. In the publication of Steiner et al. (2008) screening libraries were created by useing the signal recognition particle (SRP) translocation pathway for phage display. The proteins containing the appropriate translocation signal sequence are efficiently displayed on filamentous phage particles. Screening for DARPins binding to specific target proteins like EGF-R (Erb1) were performed by phage ELISAs. The extracellular domain I-III of the receptor ErbB1 was fused to the Fc part of human IgG1 and used for selection. The previously described combinatorial N3C library was used as a template for SRP selection. After phage ELISA ans sequencing have been performed only one clone (E_01) could be selected with high-affinity binding characteristics. For broaden the diversity of ErbB1 DARPins three more clones were selected by epitope masking (E_67, E_68 and E_69). Binding and epitope localization experiments showed that all selected clones recognize a competing epitope as the dominant binder E_01, except of E_69 which recognizes an epitope not competing with E_01. The low diversity obtained for DARPins against ErbB1 suggests that the binding interfaces are well suited for dominant selection. Additionally the selected clones showed no cross-reactivity with other ErbB-family receptors (Figure 2C).


    The dominant DARPpin E_01 has very high affinities to the target protein ErbB1 (Table 3) and can be used as a potential targeting molecule four our approach in fusing the DARPin to the N-terminal VP proteins.

    Overview of DARPinE_01 used in our approach:

    The designed ankyrin repeat protein used as a potential targeting molecule consists of three internal capping repeats and the C-and N-terminal capping repeats. Each internal repeat module comprises of one beta-turn and two hydrophobic alpha-helices. The potential interaction residues are located in the beta-turn the first alpha-helices of the AR-proteins. The complete nucleotide and corresponding amino acid sequence can be found in the appendix.


    top of page

    Update VP1 insertion

    Investigator: Anissa, Bea

    Done:

    • pSB1C3_VP1up was succesfully created by Achim. For details see labday from 2010-22-08.
    • pCerulean_VP1up was suceesfully created by Anissa. pCerulean was sequenced and the VP1up which contains the upstream 137 aa´s of the VP1 protein could be successfully cloned into the plasmid backbone pCerulean (obtained by performeing a PCR).
    • pSB1C3_NLSHybridization of the nuclear localization sequence (NLS) was successfully incorporated into the pSB1C3_CFP.
    • Today, Anissa tried to fuse the NLS to the VP1up sequence. Cutting the pSB1C3_NLS with NgomIV and PstI leads to a 45 nt fragment which normally can be resoluted in a 2% agarose gel. But no fragment could be detected in the gel (for further details see: Cloning of pCerulean_VP1up_NLS).
      On monday another approach will be performed: The NLS oligos will be hybridized and digested with NgomIV and SpeI. With the Qiaex II Kit (protocol for desalting and concentrating DNA solutions),the hybrifized oligos will be purified. Parallel, another digestion approach will be conducted.

    Next steps:

    • We obtain pSB1C3_VP23_HSPG_ko by conducting a PCR with the pAAV_RC_final (which contains the integrated "cap".
    • Fuse the obtained construct pSB1C3_Targeting Molcule to the pSB1C3_VP23_HSPG_ko.
      • Affibody ZEGFR:1907
      • DARPin E_01
      • 6xHis Tag
      • CFP
    • Fuse pSB1C3_VP23_HSPG_ko_Targeting molecule to the construct pCerulean_VP1up_NLS.
    • Finally, for providing the possibilty to express obtained construct in trans: perform a site-directed mutagenesis with the pAAV_RC_final to remove the startcodon of VP1.

    top of page

    Sequence analysis of pSB1C3_BLA_final (P309)

    Investigator: Bea

    GENERAL COMMENT: pSB1C3_BLA_final (P309) was sent for sequencing. the beta lactamse was inserted and two site-directed mutagenesis have been performed in order to delete the loop insertion restriction enzymes in the CAT marker.


    Comments: Sequence analysis of pSB1C3_BLA_final containing the two deleted restriction sites (SspI and PvuII)in the CAT marker.

    • Primer used:
      • pQE-RP
      • VF-2
    • Plasmid sequenced: P309
    • Sequence sample: SB_9
    • Stored in Geneious-folder: pSB1C3_BLA


    Results:

    The two performed site-directed mutagenesis performed at the backbone of the pSB1C3 containing the beta-lactamase can be confrimed as it can be seen in the two pictures above. Additionally the BLA sequence was sequenced aswell as the insertion of the BLA which can be confirmed with no mutations.


    Next steps: This new plasmid can be used for further experiments. Clone the PCR prdouct of the pAAV_RC into the pSB1C3 and subclone the loop insertion motifs into the vector.

    top of page

    Mini-Preps and test digestion of pSB1C3_6xHis_middlelinker and pSB1C3_6xHis_mVenus

    Investigator: Stefan

      Glycerol stocks were prepared:
    • B258 = pSB1C3_6xHis_middlelinker clone1
    • B259 = pSB1C3_6xHis_middlelinker clone2

    • B260 = pSB1C3_6xHis_mVenus clone 1
    • B261 = pSB1C3_6xHis_mVenus clone 2

    • Mini-Prep following the standard protocol

    • P310 = pSB1C3_6xHis_middlelinker clone1
      c= 185,31 ng/µl
    • P311 = pSB1C3_6xHis_middlelinker clone2
      c= 178,87 ng/µl

    • P312 = pSB1C3_6xHis_mVenus clone 1
      c= 247,62 ng/µl
    • P313 = pSB1C3_6xHis_mVenus clone 2
      c= 268,98 ng/µl

    Test digestion

    • Restriction-enzymes used: EcoRI and PstI

    Components P310+311 P312+313
    DNA 2 2
    BSA (10x) 1 1
    Buffer 4 (10x) 1 1
    EcoRI 0,5 0,5
    PstI 0,5 0,5
    H2O 5 5
    Total volume 10 10


    Incubation time: 90 minutes; Incubation temperature: 37°
    1 g Agarose, 100 ml TAE (1%), 6 µl GELRED , running time: 55 minutes at 120 Volt


    Freiburg10 test digestion His middle+His mVenus.jpg

    Comment: Test digestion looks good. Clones 1 of each plasmid (P310 and p312) were sent in for sequencing.

    Repetition of test digestion of pAAV_RC_ins-rep-cap, pAAV_RC_ins-rep, pSB1C3_Rep40_RC_Insert and pSB1C3_Rep68_RC_Insert.

    Investigator: Chris L.

    • P250 = pAAV_RC_ins-rep clone1
      c=467,50 ng/µl
    • P314 = pAAV_RC_ins-rep-cap clone1
      c=517,04 ng/µl
    • P315 = pAAV_RC_ins-rep-cap clone2
      c=444,33 ng/µl

    • P316 = pSB1C3_Rep40_ins clone 1
      c=302,22 ng/µl
    • P317 = pSB1C3_Rep40_ins clone 2
      c=274,37 ng/µl
    • P318 = pSB1C3_Rep68_ins clone 1
      c=491,69 ng/µl
    • P319 = pSB1C3_Rep68_ins clone 2
      c=498,71 ng/µl


    Test digestion:

    components volume of P250/µl volume of P314/µl volume of P315/µl volume of P316/µl volume of P317/µl volume of P318/µl volume of P319/µl
    DNA 1 1 1 1 1 1 1
    BSA (10x) 1 1 1 1 1 1 1
    Buffer 2 (10x) 1 1 1 1 1 1 1
    Enzyme Acc65I 0,75 0,75 0,75 - - - -
    Enzyme XcmI 0,5 0,5 0,5 - - - -
    Enzyme HindIII - - - 0,5 0,5 0,5 0,5
    Enzyme BstEII - - - 0,5 0,5 0,5 0,5
    H2O 5,75 5,75 5,75 6 6 6 6
    Total volume /µl10 10 10 10 10 10 10


    Incubation time: 1 h, Incubation temperature: 37° for P250, P314 and P315
    Incubation time: 45 min, Incubation temperature: 37° with HindIII for P316, P317, P318 and P319 ; 45 min, Incubation temperature: 60° with BstEII for P316, P317, P318 and P319 >br /> Preparation of gel:
    1 g Agarose, 100 ml TAE (1%), 6 µl GELRED , at 120 Volt, running time: 45 minutes


    • Marker: GeneRuler ladder mix
    Marker Sample P250 10 /µl Sample P314 10 /µl Sample P315 10 /µl Sample P316 10 /µl Sample P317 10 /µl Sample P318 10 /µl Sample P319 10 /µl
    Lane 1 3 4 5 7 8 9 10


    Freiburg10 pAAV RC ins-rep-cap pSB1C3 Rep40 ins pSB1C3 Rep68 ins.png

    Comment: The P314 and P315 looks like the control vector. The RepCap Vector_SDM_InsPvuII insertion didn´t work. The P316, P317, P318 and P318 was cut with the "wrong" enzymes. The same fragment size as the original vector appeared. Next time cut with EcoRI.

    Midi-Prep of pSB1C3_VCK_Bla

    Investigators: Chris W.

    Comment: Midi-Preps of P 320, B257

    The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

    plasmid-no. P320
    concentration (ng/µl)408


    103. labday 28.08.2010

    Mini-Prep of pSB1C3_NLS

    Investigator: Stefan
    comments: No glycerol stock and test digestion was performed because bacteria culture inocculated from glyerol stock (B233).

      Mini-Prep following the standard protocol
    • P321 = pSB1C3_NLS (1)
      c= 180,45 ng/µl
    • P322 = pSB1C3_NLS (2)
      c= 187,26 ng/µl

    COMMENT (Patrick): These mini-preps will be thrown away because B233 was used for inoculation due to a wrong entry in our plasmid excel sheet. B233 this is NOT the sequenced clone ! We sequenced B234/P282. Therefore 2x10 ml DYT + Cm were inoculated with B234.

    Cell culture

    Harvest viral Stock and Transductiot of HT and A431 cells
    1. P169: 100.000 cells
    2. P169: 200.000 cells
    3. P169: 300.000 cells
    4. P169: 400.000 cells
    5. P169: 500.000 cells
    6. P169: 600.000 cells
    7. P169: 700.000 cells
    8. P262: 100.000 cells
    9. P262: 200.000 cells
    10. P262: 300.000 cells
    11. P262: 400.000 cells
    12. P262: 500.000 cells
    13. P262: 600.000 cells
    14. P262: 700.000 cells


    200.000 cells per well

    1 2 3
    A control, no cells 1 2
    B control, no virus 1 2
    1 2 3
    A control, no cells 3 4
    B control, no virus 3 4
    1 2 3
    A control, no cells 5 6
    B control, no virus 5 6
    1 2 3
    A control, no cells 7 8
    B control, no virus 7 9
    1 2 3
    A control, no cells 11 13
    B 10 12 14
    Seeding AAV293 for Transfection at 30.8


    8 plates with 200.000 cells each were seeded

    Picking clones from the ViralBricks

    Investigator: Volker

    Clones from all 14 transformations of the ViralBricks were picked. Because the probability that the ligation worked and that the synthesized oligos do not conatin mutations is quite bad I picked 8 to 10 clones from each ligation, resulting in approximately 150 clones at all. The clones were used to inoculate 5ml of a mixture of 60%LB-media nd 40%DYP-media because our stocks were not sufficient for this experiment.

    104. labday 29.08.2010

    P282/B234 mini-prep

    Investigator: Patrick ... was performed according to the standard protocol.
    Labelling:

    • P323, pSB1C3_NLS clone 2.1, 129 ng/µl
    • P324, pSB1C3_NLS clone 2.2, 141 ng/µl

    Digestion of pSB1C3_NLS (P324)

    Investigator: Patrick

    The NLS was cut out with NgoMIV and EcoRI, therefore the expected size of the hoped-for fragment is 55 bp. About 30 ng DNA can be detected in a 1% gel. According to my calculation there will be maximal 80 ng insert.
    55bp/2019bp = 0,027
    0,027x140 ng/µl = 3,81 ng/µl
    80 ng/3,81 ng/µl = 21 µl

    Digestion: 21 µl pSB1C3_NLS (P324), 2,5 µl EcoRI, 2,5 µl NgoMIV, 3 µl Buffer 4, 1 µl H2O.
    Digestion Time: 2 h 20 minutes.

    The 2% agarose gel was loaded with 36 µl digesteion product including 6 µl 30% glycerol solution. I did not use loading dye because i to prevent that the dye overlay the mutual 55 bp insert.

    Pat2908.JPG

    The gelextraction was performed according to the the standard protocl. The resolution of the picture ist not sufficient to be able to see the band clearly as the gel was put onto the UV-light table a very thin band with the expected size could be seen.
    DNA concentration measurement: 3,28 & 7,7 ng/µl (two measurements). Especially the second value is doubtable because according to my calculation above the insert conccentration cant be higher than 3,81 ng/µl. Labeled: NLS, put into 4°C room.

    New digestion over night following a gelrun tomorrow: 23 µl pSB1C3_NLS (P324), 2 µl EcoRI, 2 µl NgoMIV, 3 µl Buffer 4.

    Harvesting cultures from the ViralBricks

    Investigator: Volker

    All approximately 150 cultures were pelletted (twice 2 ml) and the supernatant thrown away. The pellets were freezed and the rest of the culture stored in the 4°C room. These pellets will be preped, test digested and sequenced subsequently until right clones are identified.

    105. labday 30.08.2010

    BioBrick assembly of pSB1C3_leftITR_pTERT & pSB1C3_ß-globin_YFP_hGH_rITR

    Investigator: Achim

    comment: final assembly of a vector containing all aav elements & the tert promoter
    Digestion:

    components: pSB1C3_ß-globin_YFP_hGH_rITR(Vector): P294 pSB1C3_leftITR_pTERT (Insert): P256
    DNA 2,4 8,4
    BSA (10x) 2 2
    Buffer 4 (10x)2 2
    Enzyme1 1 (EcoRI) 1 (EcoRI)
    Enzyme2 1 (XbaI)1 (SpeI)
    H2O11,6 5,6
    Total volume 2020



    Preparation of gel:
    0,5 g Agarose,50 ml TAE (1%), 3 µl GELRED , at 110 Volt, running time: 45 minutes


    Freiburg10 30082010achim2.JPG


    Expected sizes of constructs:

    • pSB1C3_ß-globin_YFP_hGH_rITR: ~4000 bp
    • pSB1C3_leftITR_pTERT: 2896 bp, ~640 bp

    The corresponding bands were cut out and Gel-Extraction was performed according to protocol.

    concentrations measured via NanoDrop:

    • pSB1C3_ß-globin_YFP_hGH_rITR: 34.73 ng/µl
    • pSB1C3_leftITR_pTERT: 9.48 ng/µl


    Ligation:

    T4 ligation was performed according to protocol.

    Volumes used:

    • vector: 2,9 µl
    • insert: 5,1 µl


    Transformation:

    bacterial strain used: XL1bB

    antibiotic used for plate: chlorampenicol

    Transformation was performed according to protocol.
    Plate was prepared and put in 37°C room.

    Continuation: Digestion of pSB1C3_NLS (P324)

    Investigator: Patrick

    Freigem10 Pat 3008.JPG

    The gelextraction was performed with QIAEX II Gel Extraction Kit which should also allow to extract fragments smaller than 70 bp (at least 40 bp). According to the QIAGEN Gel Extraction Kit the lenght of the DNA fragment should be about 70 bp. Unfortunately the DNA fragment was blurred so a quite large piece had to be cut out.

    The extraction yielded 4,26 and 3,77 ng/µl (two measurements) but this sample also quite polluted. ... put into freezer

    CD biobrick production

    Investigator: Kira
    NA samples were diluted 1:100


    Ingredients CD sample
    5X Phusion HF buffer 10 µl
    10 mM dNTP mix1µl
    forward primer: O158 2,5µl
    reverse primer: O159 2,5 µl
    DNA Template0,5 µl
    DMSO 0 µl
    Phusion Polymerase0,5 µl
    H2O33µl
    Total volume50 µl


    PCR program:

    CyclesTemperatureTime
    98°C1
    8x98°C15"
    60°C25"
    72°C60"
    17x98°C15"
    65°C25"
    72°C60"
    1x72°C5'
    Hold 4°C


    Digestion of plasmid backbone:

    c (pSB1C3) = 151, 1 ng/ µl

    Components vector Volume/µL
    DNA 1 µg 6,0 µl
    BSA (100x) 0,2 µl
    Buffer no. 4 (10x) 2,0 µl
    Enzyme 1 XbaI 0,5 µl
    Enzyme 2 AgeI HF 0,5 µl
    H2O 10,8 µl
    Total volume 20


    incubation @ 37 C for approx. 2 h


    Digestion of PCR product:

    Components PCR product Volume/µL
    DNA 30,0 µl
    BSA (100x) 0,4 µl
    Buffer no. 4 (10x) 4,0 µl
    Enzyme 1 XbaI 1,5 µl
    Enzyme 2 AgeI HF 1,0 µl
    H2O 3,1 µl
    Total volume 40


    incubation @ 37 C for approx. 2 h

    1% agarose gel

    Freiburg10 CD 2010 08 30.jpg

    Ligation
    T4 ligase was used
    1 ul T4 Buffer
    1 ul T4 Ligase
    9 ul (6,9 ul vector+ 1,1 ul insert) DNA-mix

    incubation over-night @ 18C

    Repetition of test digestion of pSB1C3_Rep40_RC_Insert and pSB1C3_Rep68_RC_Insert.

    Investigator: Chris L.

    • P316 = pSB1C3_Rep40_ins clone 1
      c=302,22 ng/µl
    • P317 = pSB1C3_Rep40_ins clone 2
      c=274,37 ng/µl
    • P318 = pSB1C3_Rep68_ins clone 1
      c=491,69 ng/µl
    • P319 = pSB1C3_Rep68_ins clone 2
      c=498,71 ng/µl


    Test digestion:

    components volume of P316/µl volume of P317/µl volume of P318/µl volume of P319/µl
    DNA 1 1 1 1
    BSA (10x) 1 1 1 1
    Buffer 4 (10x) 1 1 1 1
    Enzyme XcmI 0,5 0,5 0,5 0,5
    H2O 6,5 6,5 6,5 6,5
    Total volume /µl10 10 10 10


    Incubation time: 1 h, Incubation temperature: 37° >br /> Preparation of gel:
    0,5 g Agarose, 50 ml TAE (1%), 3 µl GELRED , at 120 Volt, running time: 45 minutes
    Freiburg10 pSB1C3 Rep40 ins and pSB1C3 Rep68 ins.png

    Comment: Test digestion looks good. Clones 2 of each plasmid (P317 and P319) were sent in for sequencing with VR2 Primer.

    Midi-Prep of pAAV_RC_insertparts clone1

    Investigators: Chris W.

    Comment: Midi-Preps of B208

    The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

    plasmid-no. P325p326
    concentration (ng/µl)2481,04 2050,66


    FACS analysis, Seeding HT1080 and AAV293

    Investigators: Kerstin, Adrian

    • FACS analysis of Transduction from 28.08.2010
    • Seeding HT1080 cells for Transduction (31.08.2010): 5x 6-well plates, 270.000 cells per well
    • Seeding AAV293 cells for Transfection (01.09.2010): 10 plates, 300.000 cells per well

    Mini-Preps and test digestion of Loop insertion BioBricks

    Investigator: Anna

    Comment: Two clones of each ViralBrick were prepared and test digested.

    Mini-Preps:

    p331 p335p339
    ConstructpSB1C3_587_KO_BAP_clone3.1 pSB1C3_587_RGD_clone5.1 pSB1C3_453_His_clone7.1
    DNA-Concentration / µl65,08 94,29 73,49


    p342p345
    Construct pSB1C3_587_His_clone8.3 pSB1C3_587_KO_empty_clone10.1
    DNA-Concentration / µl69,05 66,73


    Test digestion:

    Freiburg10 LoopInsertions Sal Bam.jpg

    1% Agarose gel: 1 g Agarose, 100 ml TAE, 6 µl Gelred
    Marker: Gene ruler ladder DNA mix, 5 µl

    Used enzymes: SalI, BamHI (in general, SDS has to be added because of the strong binding of enzymes to DNA!)

    Comment: Test digestion had no significant results. In addition, one sample was forgotten, it was not clear which one (description makes no sense). Test digestion has to be repeated.



    Repetition of subcloning Cap-insert into pAAV_RC

    Investigator: Stefan

    Comments: There are still problems with BspMI. It was assumed that longer digestion could improve the results, therefore digestion with BspMI will be performed overnight.
    P.S: Welcome back Hanna!



    Digestion of vector and insert:

    • Insert: pMA_RepCap Vector_SDM_InsPvuII clone 1 (P211)
    • Vector: pAAV_RC_ins-rep clone1 (P250)



    A two-step digestion was performed:

    1st step

    P211 / µl P250 / µl
    DNA8,5 2
    buffer 34,6 5
    Enzyme BsiWI1 1
    H2O32,4 38
    total volume46 46


    2nd step

    P211 / µl P250 / µl
    Mix obtained from step 1 46 46
    Enzyme BspMI4 4
    total volume50 50



    Digestion will be performed overnight and continued tomorrow.

    106. labday 31.08.2010

    Cloning ZEGFR:1907 and 6xHis_middlelinker into pCerulean

    Investigator: Hanna

    Comment: In order to fuse the His-Tag to VP2, the His-Tag-Middlelinker construct will be cloned into the pCerulean plasmid (contains CMV promoter and SV40 terminator) today. In the next step, VP2 will be cloned behind the His-Tag-Middlelinker.
    In addition to that the Affibody (ZEGFR:1907) will be also cloned into pCerulean (without linker). Also here, the next step will be fusing VP2 behind the this targeting molecule.


    Practical Cloning:

    • plasmid:
      • Vector: name: pCerulean; number: P273
      • Insert: name: pSB1C3_6xHis_middlelinker (P310) + pSB1C3_Zegfr:1907 (because P267 was empty, P285 was used! See lab day 23.08.!)
    • new vector name: pCerulean_6xHis_middlelinker + pCerulean_Zegfr:1907
    • buffer used: 4; Restriction-enzymes used: XbaI and PstI


    Comments: Because the P267 tube was empty (!), P285 was used which was prepared by Jessy - I don't know whether this is a trafo of the glycerol stock? Sequenced?

    Digestion

    components volume of pCerulean/µl volume of pSB1C3_6xHis_middlelinker/µl volume of pSB1C3_ZEGFR:1907
    DNA 3.6 16.2 11.5
    BSA (10x) 3 2.5 2
    Buffer 4 (10x) 3 2.5 2
    Enzyme 1 XbaI 1.5 1 1
    Enzyme 2 PstI 1.5 1 1
    H2O 17.4 1.8 2.5
    Total volume 30 25 20
    • Incubation: 1.5 h



    Agarose-Gel:


    0.8 g Agarose, 55 ml TAE (1.45 %), 3 µL GELRED, at 115 Volt, running time: 35 minutes

    Sample Sample/µl] Loading dye (6x)/µl Expected size 1 (Geneious)
    P285 20 µl 4 µl 210 bp
    P273 30 µl 6 µl ~ 3900 bp
    P310 25 µl 5 µl 86 bp


    • Marker: GeneRuler ladder mix
    Marker /µL Sample P285 /µl Sample P273 /µl Sample P310 /µl
    Lane 5.5 24 25 25


    Freiburg10 Digestion 6xHis middlelinker and Zegfr.JPG.gif

    Gel extraction


    Gel measurement:

    Sample Weight Volume Concentration
    P285 240 mg 20 µL 5.4 ng/µL
    P273 130 mg 20 µL 14.5 ng/µL
    P310 220 mg 20 µL 2.4 ng/µL


    Comment: The DNA concentrations were very bad, which could be due to the fact, that the 6xHis_middlelinker construct's size is just 86 bp and the affibody's size is just 210 bp...


    Ligation


    1. pCerulean_6xHis_middlelinker

    6xHis_middlelinker pCerulean
    Volume/µl 2.57 6.43


    2. pCerulean_Zegfr:1907

    Zegfr:1907 pCerulean
    Volume/µl 2.72 6.28


    Trafo


    Trafo was performed following the standard protocol. Cells: XL1b (60 µL), DNA amount per sample: 3 µL; cells were plated onto Kanamycin-plates.

    PCR of SV 40 terminator

    Investigator: Bea

    Comment: In order to obtain the SV40 poly adenylation site and clone it into the iGEM standard plasmid pSB1C3 a PCR needs to be performed with the pEGFP-C1 which contains the SV40 terminator.


    • Plasmid used for PCR: pEGFP-C1 (P230)
    • 1:1000 dilution of P230 has been prepared
    • Plasmid used as vector: pSB1C3_CFP1 (P51.2)


    PCR (was performed following the standard protocol)

    Ingredients Volume / µl
    5X Phusion HF buffer 10
    10 mM dNTP mix1
    forward primer: O160 2,5
    reverse primer: O1612,5
    DNA Template3
    Phusion Polymerase0,5
    H2O30,5
    Total volume50


    PCR program:

    PCR Programtemperature/ °CTime
    198 1min
    298 15s
    8x59 25s
    3 727s
    4 98 15s
    17x6725s
    5727s
    6x725min
    Hold4

    After the PCR was performed, the sample was loaded on a 1.5% agarose gel and run for 30 minutes. As it can be seen in the picture below the expected size of the PCR product (260bp) can be confirmed. The lower band corresponds to the added primers and does not seem to be an additional band.


    For cloning the obtained fragment into the pSB1C3 standard vector, the construct need to be digested with the same restriction enzymes as the PCR product will be cut with. In this case the primers were designed with XbaI overhang for the prefix, and with SpeI-NotI-PstI overhang for the suffix. Therefore the vector will be cut with XbaI and PstI. The sample were incubated at 37 C for approx. 1.5 h

    • Plasmid used: pSB1C3_CFP (P51.2) c=150ng/µL
    • Add BSA
    • XbaI and PstI were used


    Digestion of vector:

    Components vpSB1C3_CFP/µL
    DNA 8
    BSA (100x) 2
    Buffer no. 4 (10x) 2
    Enzyme 1 XbaI 1
    Enzyme 2 AgeI HF 1
    H2O 6
    Total volume 20


    • Incubation of the sample at 37°C
    • Incubation for 120 minutes


    After the PCR has been cut out of the gel and purified with the Qiagen Gel Extraction Kit obtaining a concentration of 45 ng/µl measured with the Nanodrop, the complete PCR product volume of 29 µL was digested with XbaI and PstI for 2 hours.

    Digestion of the PCR product SV40

    Components vPCR product/µL
    DNA 29,0 µl
    BSA (10x) 4,0 µl
    Buffer no. 4 (10x) 4,0 µl
    Enzyme 1 XbaI 1,0 µl
    Enzyme 2 AgeI HF 1,0 µl
    H2O 1,0 µl
    Total volume 40
    • Incubation of the sample at 37°C
    • Incubation for 120 minutes


    The digested PCR product SV40 was purifed with the PC Purification Kit and concentration was measured.

    • cSV40= 31,5 ng/µl
    • cpSB1C3= 7,74 ng/µL

    For T4 ligation of the two fragments, the needed volumes of insert (SV40) and vector (pSB1C3) were calculated with the labtools program. The total volume DNA (vector/insert) mix will be 8 µL.

    • vSV40= 0,67 µL
    • vpSB1C3= 7,33 µL
    • vT4 buffer= 1 µL
    • vt4 ligase= 1 µL

    The ligation reaction was carried out for 40 minutes at room temperature. The ligated plasmid was transformed into XL1-Blue cells and plated on agar plates containing the appropriate amount of chloramphenicol.

    Cloning of NLS into pCerulean_VP1up

    Investigator: Anissa

    Comment: NLS was already 2 times cut of the pSB1C3_NLS and purified by Patrick (NLS 1: of the 29.08.10, NLS 2: of the 30.08.10) . Now, pCerulean_VP1up will be digested and NLS will be ligated into it.


    • Digestion of pCerulean_VP1up (p303)

      components Vector
      DNA 2,6
      BSA (10x) 1,5
      Buffer 4 (10x)1,5
      Enzyme PstI 1
      Enzyme AgeI 1
      H2O7,4
      Total volume 15


    • Gel:
      A 1% gel was made and the sample was running 30 minutes.
      Anissa310810.png
      Afterwards a gelextraction according the qiagen-protocol was performed.

    • Ligation:
      components Volume /µl concentration /ng/µl
      NLS 2 insert of 30.08.10 1,51 3
      NLS 1 insert of 29.08.101,513
      pCerulean_VP1up6,49 29


    • Transfomation: was performed into XL1 blue on a kanamycin plate according the standard protocol.

    Cloning CFP_middlelinker (from pSB1C3_CFP_middlelinker, P276) into pCerulean (P273)

    Investigator: Patrick
    P276 digestion (207 ng/µl): 14 µl DNA sample, 2 µl Buffer 4, 2 µl BSA, 1 µl XbaI, 1 µl PstI-HF.
    P273 digestion (419 ng/µl): 4 µl DNA sample, 1 µl Buffer 4, 1 µl BSA, 1 µl XbaI, 1 µl PstI-HF.
    Digestion time: 1 h 45 min.

    Expected size of the fragments:
    P276: 786 & 2058 bp
    P273: 756 & 3938 bp

    My dear friend, where is your initial comment? Nice gel :) Yours sincerely, Hanna :)

    see: http://www.molbiotech.uni-freiburg.de/iGEM/wiki2010/index.php/August_2010#Strategy_for_VP2_N-terminal_fusion_and_VP1_insertion_of_targeting_moelcules
    Haha, good idea! :)
    Freiburg10 3108pat2.JPG


    Gelextraction: Obviously there was something wrong with the gel or the sample. The marked bands were cut out and the gelextraction was performed acording to he standard protocol, yielding the following concentrations:
    P276 up: 12,6 ng/µl
    P276 down: 9,9 ng/µl
    P273: 37,7 ng/µl

    All of them were polluted.

    There were two bands at a level where no bands should be. P 276 looks also strange because accidentally 6,5 µl 1kb GeneRuler were pipetted into the sample. The expected bands are all blurred. Even the expected 756 bp fragment of P273 is not at the level it should be. To ensure i dont throw away the insert i cut out both bands from P276. Now tomorrow there will be a ligation and a transformation with two samples instead of one



    Sequencing results of pSB1C3_6xHis_middlelinker and pSB1C3_6xHis_mVenus

    Investigator: Hanna

    1st Comment: Sequencing of pSB1C3_6xHis_middlelinker looked good:


    Freiburg10 6xHis middlelinker.JPG

    2nd Comment: Sequencing of mVenus looked good. The His-Tag delivered 2 additional bp and the suffix 1 transition (see picture). This could be due to bad sequencing qualities at this region... but needs to be verified!

    Freiburg10 6xHis mVenus.JPG

    Contiuation: Repetition of subcloning Cap-insert into pAAV_RC

    Investigator: Stefan

    Comments: Overnight digestion does not look good, therefore a new approach will be performed today using different concentrations of spermidine (0,5mM, 2,5mM and 10mM) because in Oller et al (Biochemistry, 1991) it was suggested that this improves digestion with BspMI.

    A two-step digestion was performed:

    1st step

    P211 / µl P250 / µl
    DNA8,5 2
    buffer 34,6 5
    Enzyme BsiWI1 1
    H2O32,4 38
    total volume46 46


    • Incubation: 70 minutes; 55°C

    2nd step

    P211 / µl P250 / µl
    Mix obtained from step 1 46 46
    Enzyme BspMI4 4
    total volume50 50


    • Incubation: 2,5h ; 37°C

    Agarosegel
    0.4 g Agarose, 50 ml TAE (0,8 %), 3 µL GELRED, at 115 Volt


    Freiburg10 P250 without Spermidine.png
    Freiburg10 P250 with spermidine.png

    Gel extraction
    Gel-Ex was performed according to protocol.
    NanoDrop:

    • pMA_RepCap-insert: c= 7,42 ng/µl
    • pAAV_RC_ins-rep: c=12,9 ng/µl


    T4 Ligation
    Volume insert: 3,43 µl
    Volume vector: 4,57 µl
    Ligation incubated for 50 minutes at room temperature.

    Transformation Trafo was preformed according to standard protocol using XL1blue cells on plates containing Ampicilin.

    2nd Repetition of test digestion of Loop insertion BioBricks

    Investigator: Achim, Anna

    Comment: First test digestion didn't work (see 31.08.10), this time a new approach was done with NotI.

    Test digestion:

    components Volume for each sample /µl
    DNA 10
    BSA (10x) 1,5
    Buffer 4 (10x) 1,5
    Enzyme NotI 0,5
    H2O 1,5
    Total volume /µl15


    Sample-No. 1+2 3+4 5+6 7+8 9+10 11+12 13+14 15+16 17+18 19+20 21-23 24+25 26+27 28+29
    Components 453 BAP 587 BAP 587 KO BAP 453 RGD 587 RGD 587 KO RGD 453 HIS 587 HIS 587 KO HIS 587 KO EMPTY 453 Z34C 587 Z34C 587 KO Z34C 587 KO Z34C SPACER
    Oligo 1O124: 10 O126: 10 O128: 10 O130: 10 O132: 10 O134: 10 O135: 10 O137: 10 O139: 10 O141: 10 O143: 10 O145: 10 O147: 10 O149: 10
    Oligo 2 O125: 10 O127: 10 O129: 10 O131: 10 O133: 10 O151: 10 O136: 10 O138: 10 O140: 10 O142: 10 O144: 10 O146: 10 O148: 10 O150: 10

    30: pSb1C3_Bla (cut version) 31: pSb1C3_Bla (uncut)


    Incubation time: 1 h, Incubation temperature: 37°

    Preparation of gel:
    1 g Agarose, 100 ml TAE (1%), 6 µl GELRED , at 115 Volt, running time: 45 minutes

    Freiburg10 LoopInsertions.jpg


    Expected fragment sizes /bp:
    pSB1C3: 2051 bp Bla: 905
    BAP: ~150
    RGD: ~ 130
    Z34C: ~ 200
    His: ~ 125

    The following clones were sent for sequencing: 2,3,5,7,9,11,13,16,17,19 and 25.

    Comment: Clones (see above) were sent for sequencing with VR2 Primer. In addition, 8 mL DYT medium was inoculated with each of the clones for preparation of glycerol stocks. For sequencing results go to labday 01.09.10.

    Midi-Prep of pAAV_RC & pHelper

    Investigators: Chris W.

    Comment: Midi-Preps of pHelper=P356 and pAAV_RC=P357

    The Midi-Preps were performed according to the standard protocol yielding the following concentrations:

    plasmid-no. P356P357
    concentration (ng/µl)1068,0 1274.80


    Transformation of Biobrick CD

    Investigator: Kira
    Transformation was performed according to the standard protocol.

    => Go to Labjournal September part 1 (labday 107 - 123)