Team:ETHZ Basel/Modeling/Light Switch

From 2010.igem.org

Revision as of 22:08, 27 October 2010 by Langmo (Talk | contribs)

The light switch

We created two models representing representing the different biological approaches how to control the tumbling frequency of the E. lemming,

Modeling of the PhyB/PIF3 light switch

Figure 1: Schematic overview of the devices and change upon light pulse induction. LSP refers to light switch protein, AP to anchor protein and Che to the attacked protein of the chemotaxis pathway.

Background

In our biological setup, the relocation of one of the chemotaxis pathway proteins (either CheR, CheB, CheY or CheZ) is achieved by fusing them to a light-sensitive protein LSP1 (either to PhyB or to PIF3), which dimerizes by red light induction with the corresponding LSP2 (PIF3 or PhyB), fused to a spatially dislocated anchor. Since we decided to implement two different models of the chemotaxis pathway (see section Chemotaxis Pathway), modeling all setups implemented in the wet-lab would have resulted in 16 different models:

|{CheR, CheB, CheY, CheZ} × {PhyB, PIF3} × {Model 1, Model 2}|=16.

Inspired by the modular approach used for the Cloning Strategy in the wet-lab, we decided to decrease the combinatorial explosion by also applying a novel modular approach. Not only did this approach reduce the amount of models by a factor of four, it also allowed to widely separate the differential equations of the chemotaxis pathway from those of the light-induced localization system by simultaneously decreasing redundancies and thus decreasing the danger of slip of the pens. The underlying mathematical model for the light-induced relocation was completely developed by us (for a short discussion of the recently by Sorokina et al. published light-induced relocation system and why we did not use it, see here) as well as - to our knowledge - the approach to couple this model to models of the chemotaxis pathway.

Assumptions

The following assumptions have been made according to the molecular mechanism to link the light switch and chemotaxis models:

  • Upon red light pulse induction, the two light-sensitive protein (LSP1 and LSP2) domains can hetero-dimerize.
  • The TetR-LSP2 can bind to the operator (tetO) on the DNA.
  • Only after both reactions took place, we assume the Che protein to be spatially dislocated. This means
    • CheR-LSP1 is not able to methylate the MCPs anymore,
    • CheY-LSP1 can't be phosphorylated and interact with the motor anymore; nevertheless, it still can be dephosphorylated.
    • CheB-LSP1 is not able to demethylate the MCPs and can't be phosphorylated anymore, but still can be dephosphorylated,
    • CheZ-LSP1 can't dephosphorylate CheY anymore (This assumption is very unsteady, since CheY is not strictly located).
  • If only one of the reactions took place, we assume that the localization and activity of the fusion proteins are the same as for wild-type cells.

All of these assumptions will lead to a decrease of tumbling / directed movement ratio upon red light induction and an increase of corresponding far-red light induction.

Facing the Combinatorial Explosion

The main problem in separating in silico the chemotaxis pathway from the light-induced relocation system is the non-existence of a hierarchical relationship between the two sub-models: The properties of the chemotaxis pathway are clearly influenced if the active concentration of one of its key species drops, such that giving the amount of localized proteins, obtained by the localization model, as an input to the chemotaxis model is a natural conclusion. However, also the concentration of the localized species of the localization model change depending on the reactions in the chemotaxis model, since several of the Che proteins are modeled as two or more molecular species. The CheY protein for example is modeled as two species, one representing the phosphorylated and one the non-phosphorylated molecular concentration. Thus, the two models cannot be represented as e.g. a hierarchical block structure, which is making a modular approach significant more complicated.

Our approach to modularize the model is based on an observation of the reaction directions which can take place in the overall model. For example, Figure 2 shows all eight species which have to be implemented to adequately describe the localization and phosphorylation states of CheY when fused to PhyB (the reactions taking place without CheY-PhyB, as for example the binding and unbinding of the PIF3-TetR monomer to tetO, are not depicted for simplicity). As can be seen, the reactions of the chemotaxis pathway and the reactions of the light model have different directions. The reactions of the light model are horizontal and independent of the phosphorylation level of CheY. On the other hand, the reactions of the chemotaxis model are vertically. However, one of the reactions of the chemotaxis model is not independent of the states mainly influenced by the light model: When CheY is localized at the DNA, the receptor complex cannot transfer a phosphor to it anymore. The respective species diagrams for the other three species (CheZ, CheB, CheR) as well as for the other light model (the Che protein is fused to PIF3 instead of PhyB) look similar, although the number of rows and columns can change.

Different species representing different localization and phosphorylation states of CheY.

We used this regularity to modularize the overall model: A variable table of states representing the concentration of all Che proteins in their different phosphorization and localization modes is shared between the light model and the chemotaxis model. The number of rows of this table is dynamically determined by the chemotaxis model and the number of columns is determined by the light model, depending on the choice of which Che protein is fused to which light sensitive protein. The light model may only change the distribution of the species in each row, but may not change their sum (conservation relation). The chemotaxis model on the other hand may only change the distribution of the species concentration in each column. Although the tables may have different sizes, always the last column is representing the localized proteins. The chemotaxis model thus only applies a subset of reactions to this row, as mentioned in the assumptions.

All other species of both models are not shared between the two models, which also in any other way as mentioned above act independently. Using this approach we succeeded in uncoupling the model of the PhyB/PIF3 system from the model of the chemotaxis pathway, reducing the amount of redundancy and possible error sources significantly.

Archeal light receptor

Another way we considered to implement the light switch was to fuse an archaeal photoreceptor to the E. coli chemotactic transducer. i.e. we replaced the usual receptor of E. coli that binds & is activated by chemo-attractant, with a receptor that is activated by blue-green light as demonstrated by Jung et al. (2001) [1].

For this we could use our already implemented chemotaxis models. We picked the chemotaxis model suggested by Mello & Tu (2003), for which we already have an implementation in our MATLAB tool box. We only had to replace the the interaction between the chemo-attractant and the receptor with a similar interaction between light and the receptor which gives rise to the same set of events down stream of the chemotaxis pathway.

The strategy to model this interaction was to define the dynamic receptor occupancy as a function of the light input. This directly corresponds to the receptor occupancy in the usual case with the usual chemo receptor, which is a function of the chemo attractant. The receptor occupancy reflects the fraction of receptors activated by the stimulus (chemo attactant or light).

With the help of this implementation we were able to display the cell internal CheYp concentration, to estimate the photoreceptor occupancy and to calculate the bias as shown in the E. lemming section.

References

[1] Jung et al: An Archaeal Photosignal-Transducing Module Mediates Phototaxis in Escherichia coli