Rhodamine-Conjugated Chitin Probe

From 2010.igem.org

(Difference between revisions)
(Methanol Fixation)
(Methanol Fixation)
Line 1: Line 1:
-
==Methanol Fixation==
+
 
 +
=Methanol Fixation=
# Rinse slide with ethanol and flame
# Rinse slide with ethanol and flame
# Rinse slide with PBS and dry with KimWipe
# Rinse slide with PBS and dry with KimWipe

Revision as of 19:29, 14 August 2010

Methanol Fixation

  1. Rinse slide with ethanol and flame
  2. Rinse slide with PBS and dry with KimWipe
  3. Apply cell sample to microscope slide and let air dry
  4. Submerge in -20C absolute methanol for 5-10 min
  5. Wash 3 times with 1X TBS (submerge in 1X TBS for 5 minutes per wash)
    • Do not let cells dry for the rest of the procedure

Staining

  1. Make 1:500 dilution of chitin probe in TBS (50ul of probe is used per slide, [49.9ul of 1X TBS]:[0.1ul of chitin probe] --> 1 slide)
  2. Apply 50ul to the slide containing the sample
  3. Allow stain to incubate overnight at RT in a dark room
    • To prevent stain from evaporating overnight: Use a large glass petri dish. Soak a paper towel with PBS and place it at the bottom of the petri dish. Use 2 toothpicks to support the slide above the paper towel. This prevents any wicking action from occurring and pulling the stain off the slide.
  1. Wash 3 times with 1X TBS (submerge in 1X TBS for 5 minutes per wash)